6300 games etc not found on memory card anymore

as said above, i tried to copy (not cut) everything over to a 2GB card, but some things were write protected.
so i put the old card back in to the phone (including all the exsisting files), but now theres no games, even thought you can explore the memory card on the PC and it's all there?
6300

got the files & put them on to the new micro sd card & their still not being recognized.
i'm getting a data cable delivered in the next few days, so i'll update the firmware first and see how it goes, if not, i'll take it into the nokia care centre near me
6300

Similar Messages

  • Camcorder video error: "Unable to record. Resolution not supported by memory card."

    We purchased two Samsung Droid Charges the first day they were released and recently they've both been getting this error after 8-15 seconds of recording in HD (1280x720): "Warning: Unable to record. Resolution not supported by memory card."
    Called Verizon tech support, but they referred me to Samsung. Not knowing much about micro SDHC cards, I was alarmed to discover that the factory pre-installed 32gb card is only rated class 2 for speed. Samsung told me you need a minimum of speed class 4 or higher to record at this resolution. The only problem is you need an SD card installed in order to use the camcorder, period. In other words, all of us who payed an arm and a leg for the best phone Verizon sells now have to go buy our own micro sd card that actually supports all of the phone features as advertised?! The lowest prices I've seen for the faster cards are $70. Are we the only two Charge owners experiencing this problem?  I've read somewhere that lower speed class cards may initially support faster speeds than they are rated until they accumulate more files, so the problem may go undetected for some time until you have more files that are stored in different locations on the card (making them difficult to access at the faster speeds). This may explain why are the first ones to get this error since we've had the phones the longest and only 50% free space remaining on the SD card. Oh, Samsung also said they won't be able to replace your card for one that has the proper speed rating. Kind of seems like false advertising to say a feature is available (HD camcorder), and then not mention the fact that the memory card provided isn't sufficient for that feature (separate upgrade required). Anyone else sharing the same frustrations? Ideas?

    Thanks for the response. I've tried everything on that page. It's not an issue with the cable, or firewire port or the cable being connected properly, as the iSight camera works fine with iChat. I've disconnected the only other firewire device on the computer, didn't make any difference. Camera works fine in iChat, so it's not the camera itself. And, as I mentioned in the post, the same camera, if hooked up to my laptop, works just fine recording in QuickTime. So, it appears to be an issue with the QuickTime installation on this computer. I've done a search for the same error I'm getting and found some other occurrences with the same problems, but none that offered a solution.

  • Untrusted software found on memory card to remove ...

    I have frequent problem showing when I restart my device Nokia E63 "Untrusted software found on memory card to remove goto application manager" Any solution?
    LEARNING AND WISDOM ARE SUPERFLUITIES, THE SURFACE GLITTER MERELY, BUT IT IS THE HEART THAT IS THE SEAT OF ALL POWER . . . .
    Solved!
    Go to Solution.

    Being a Nokia S60 device user, you may every now and then get insanely annoyed by the error message "Untrusted software found in memory card..." , "installing.. untrusted software found in mass memory go to app manager" or "untrusted sw found" whenever inserting your memory card, or rebooting your phone. (The situation is showed in the video over)   A lot users might also find it a dated issue since tips written, spreaded to tell how to resolve it have long been there on the net. So I'm just doing the recollection and, a little more.
    E:\Private\10202DCE is the path you are supposed to find and the file folder to delete. The error message would be gone from next time you insert memory card or reboot the device after the folder is deleted.
    Until another theme is installed in your memory card. Because it will generate another folder with the same path and name. So this seems not the ultimate answer. Intalling the theme on phone's RAM would be a better solution if you get memory space large enough in your phone RAM.  
    But, what if, suppose, that you intend to install themes on memory card for there always was, is and will be much more memory space in it than in the phone's RAM? Find and delete the folder over and over again  after you install any theme for every single time? For sure you can give it a try if you want to.
    Yet now there comes out another approach in the commercial market from MMMOOO team. To customize and revise themes, or maybe get brand new and cool themes without any this kind problem. MMMOOO is the No.1 Theme UI provider for Nokia Symbian phones, and our unique tech ensure our theme without this problem. Thus to make it really gone forever!

  • BB Curve 9220 not reading the memory card

    Hello,
    I have a Blackberry Curve 9220
    v7.1.0.746 , Platform 9.50.0.80
    1 week ago I was using this phone and that time i didnt have a memory card in this device. I opened wechat and it showed either to insert memory card or to disable usb mass storage in this device. I didnt have a memory card that time, so, i tried todisable the usb mass storage and I did that.
    Today, I inserted a memory card in this device, it shows that "Media Card is presently not inserted in this device"
    When I searched the internet I got some solutions. They showed that to enable mass storage mode and check media card support on.
    I turned Media Support set to ON.
    I have made sure that the media card is formatted and inserted properly.
    BUT
    When i pressed the option (BB Logo key) button , it didnt show the option to enable  usb mass storage. It just showed these options : "Switch app" ,"Select Text" , "Save" , "Help" , "Close".
    There is no option to enable usb mass storage and it is not reading the memory card
    Please tell me what to do !
    Thankyou

    Hi Manabb04
    Enable or disable USB mass storage mode
    If you connect your BlackBerry smartphone to your computer using a USB cable but does not appear as a drive on your computer, you may need to activate the USB mass storage.
    On the Home screen or in a folder, click the Options icon. 
    Click Device> Storage.
    Press  > Enable USB mass storage.
    If necessary, type the password for the smartphone.
    Your smartphone appears as a drive on your computer.
    To disable USB mass storage mode, press  > Disconnect.
    BBM Channels  PIN: C0007093A
    Do not forget to give LIKE    Those people who help you and advise you about your doubts.  if the review has been SOLVED** # 4LL  #ÉliteRoad  Make a backup of your BlackBerry
    BlackBerry Protect and  BlackBerry Link constantly.  #ichooseBlackBerry10 Gutijose14 Forums Veteran I

  • HELP: How do I print a photograph from my computer (not from a memory card) with photo quality ?

    HP6510 print-scan-copy-web (All-in-one) ePrint wireless
    Mac OS X 10 6.8
    How do I print a photograph from my computer (not from a memory card) with photo quality ? 
    Is there a software that enables me to let the printer know that what I am sending to print is a photograph and not, for example, a document?
    I sent a photograph to print from I-Photo and from Photoshop and the printer prints it like a document, that is to say, quickly and with very poor quality...for what is a PHOTOGRAPH.
    I bought my print yesterday in Spain and Monday I must turn in a printing job at work. Pleas help. (Today is already Saturday.)
    Thanks

    In OSX when you go to file and print you will usually get a window that pops up with print settings.
    In 10.6 it may only show you the printer to use, and the preset to use, but you can click the square to the right of that with a triangle in it to view more options.
    From here there is a drop down for paper type/quality, where you can select photo paper, and a higher quality, then go to print.
    The following link will actually show screenshots of these settings and how to navigate them:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01662562&tmp_task=useCategory&cc=us&dlc=en&lang...
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • Error Code, not using a memory card

    I cannot send any documents from my laptop to the printer. There is an Error Code that says "Please Use Only One Memory Device At a Time" also the network light is flashing blue. 
    I am not using a memory card at all, just laptop to printer PLEASE HELP!

    Hi TE8762,
    I would like to help you with the symptoms your printer is experiencing. What model is it? Finding Your HP Product Model Number.
    While I wait to hear back from you, please ensure the printer is connected directly to a wall outlet and perform a power reset. To perform a power reset, leave the printer on and unplug the power cable. Leave the printer unplugged for at least 1 full minute then reconnect the power cable.
    This alone may resolve the issue, if not let me now which printer it is and we can go from there. Thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Iphoto won't recognize my memory card anymore (since a month ish?) but the mac itself does and puts the icon on the desktop.  How do I get it to recognize it again?

    Iphoto won't recognize my memory card anymore (since a month ish?) but the mac itself does and puts the icon on the desktop.  How do I get it to recognize it again?

    Thank you so much for responding.  I will look for the other disks.
    One more question - I initially decided to do this because my Mac kept opening with the date changed to 2008, and I keep having to re - enter my Web key.  In addition, it was running much slower.  Since I 'cleaned' everything out, I thought all would work perfect.  This morning, the date changed to 2008; again AND it again asks for my Web key.  Does this mean my Mac has reached it's almost end or could I have a 'bug' on it?
    Again, thanks so much for your suggestions.

  • My 6500 slide could not read my memory card!

    Hello everyone,
    My 6500 slide works fine until now. All of sudden, The phone does not read my 1 GB memory card. It said "No memory card found" when I try to check phone memory. Data storage also not available. Please help!
    sondang

    Take the back of the phone off.
    The window in the back, which has the cover for the lens, has a rim around it.  Part of this rim is raised up - this is the contact to enable the phone to see the memory card.
    What happens over time is that the case on the phone may become compressed and the contact gets flattened down.
    What you need to do is slide a thin flat blade scredriver under the raised part, and carefully twist the blade to raise the contact upwards, very slightly (~1mm).
    Put the back of the case back on the phone.
    Worked fine for me!

  • Laptop computer HP Pavillion dv7 does not show sd memory card

    I put my 16 GB SDHC  class 10  new memory card  into my laptop memory card slot reader
    but the computer does not even show an icon for the memory card slot reader. When I pushed the card all the way in
    my Kaspersy Virus software asked me if I wanted to scan the new memory card. So it was recognised by Kaspersy.
    What to do? I am trying to download a firmware upgrade for a camera I own. I have dowloaded the firmware but cannot tranfer the file because the computer is not showing an icon for the memory card.

    Formatting in post #2 was removed. Reposting: Further details added as found: Selecting Device Manager | View | Devices by Connection and browsing down the tree shows: dv7-3060us -- ACPI x64-based PC ---- Microsoft ACPI-Compliant System -------- AMD PCI Express (3GIO) Filter Driver ---------- PCI Standard PCI-to-PCI Bridge 1394 ------------ OHCI Compliant Host Controller ------------ JMB38X MS Host Controller ------------ JMB38X SD Host Controller ------------ JMB38X SD/MMC Host Controller ------------ JMB38X xD Host Controller Examining details on above shows this: Device Class GUID {4d36e970-e325-11ce-bfc1-08002be10318} PCI bus 10, device 0, function 3 Any troubleshooting hints? Could a connector worked loose from the motherboard?

  • Lightroom 4/5 does not recognize memory cards anymore

    I signed up for the Creative Cloud $10 PS/LR deal earlier this week.  Previously I had LR 4 (and PSE).  I'm a longtime LR user.  The first time I used LR5 was today.  The problem I describe started happening in LR4 as soon as I downloaded CC, before LR5 was even installed, and is continuing to happen in LR5. I have (and have always had) the option checked for the import dialog box to pop up when a memory card is detected. That is no longer happening as of the CC download.  If I click on "import", it does show my memory card; the dialog box just does not automatically pop up.  When the memory card is highlighted on the top left of the import dialog box, it states that there are no photos.  This happens with all 5 of my memory cards, so I feel confident it is not a memory card issue.  If I go further down on the left side of the import dialog box, I can click on the drop down arrow for my memory card and it will bring up the folder that is on the card (where the photos actually are).  If I highlight this folder, the photos show up and I am able to import them.  At times, Lightroom sees photos on the card that are already imported but does not recognize them as duplicates, but not always.  I have searched for answers on this but have not found anything that pertains to my situation.  Can anyone tell me how to get my import dialog box to automatically open again when I insert a memory card?  Thank you.
    ETA:  I am using a Mac running OSX 10.8.5.

    The virtual keyword is classified as a "future reserved word". In the current AS3 language spec it does nothing, and can safely be removed.
    From the help:
    "There are also several identifiers that are sometimes referred to as future reserved words. These identifiers are not reserved by ActionScript 3.0, though some of them may be treated as keywords by software that incorporates ActionScript 3.0. You might be able to use many of these identifiers in your code, but Adobe recommends that you do not use them because they may appear as keywords in a subsequent version of the language."
    http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3_Flex/WS5b3ccc516d4fbf351e63e3d 118a9b90204-7f9b.html#WS5b3ccc516d4fbf351e63e3d118a9b90204-7f6e

  • Laptop will not read any memory cards

    Laptop Model: Satellite P500 (PSPE8C-026006)
    I have tried several times to get this memory card reader to work. At first, I tried putting in a memory stick PRO Duo with the memory stick pro adapter (so that it could read it), and I was getting a "File I/O" error and that the stick had to be formatted. I tried again with several other different sticks and got the same error. I then tried to update the drivers for the device and still no luck. But now, the memory stick is not even being detected at all.
    Could someone please give me a good link to the latest driver for this memory card reader + how and where the device will appear on the Device Manager list so I know it's properly installed.

    Satellite P500-026 (PSPE8C-026006)
    (Windows Vista Home Premium 64-bit) 
       Card Reader for Windows Vista 64bit, 2.0.06A, 6/24/2009
       O2 Card Reader Controller-2.0.06A.zip
    My card reader (in a Lenovo machine) is under PCMCIA adapters in Device Manager.
    -Jerry

  • Music player not refreshing the memory card in Nok...

    Hi All,
    I have , once, removed my mobile phone from data cable without safety remove and there it gave me lot of troubles. My facebook was not able to be connected through the provided application and my music player stopped working as and stopped refreshing saying that "File corrupted"
    Finally. i removed my memory card, formatted it and made it worked.
    Nokia should consider fixing these issues as we respect them a lot and think that they are still the #1 hardware vendor and will keep giving us good options than Samsung - android and will compete with apple phones.
    Thanks,
    Madas

    It already states that removing your cable without properly ejecting the device will cause problems with the software and memory card inside your device. 
    This issue is user side removing the cable early. To prevent further corruptions, please safely remove hardware from your desktop.
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Desktop manager for mac will not read the memory card

    I have a Storm and the desktop manager does everything correctly except it will not recognize the media card for music.  It says "please insert a media card in your device."  Ive got the 8GB microSD card and it shows up in the phone memory but i cant load any music from my computer.

    OK, I spent an hour and a half on the phone with RIM support this morning trying to fix this very thing with SUCCESS!!!  Here is what you need to do.  Keep in mind that this fix can only be done on a PC and NOT a Mac.  Sucks, but its reality.  Click on the link below and make sure that the PC your doing this on has the BB desktop manager installed on it.  I went to my dads house and used his PC.  After the tech and I learned that the DM has to be installed before you start the fix we were able to resolve the problem and the DM on the mac recognizes the media card.  I'm also able to see the BB1 and BB2 icons on the desktop now so I can drag and drop if I want.  I hope this helps you all.  If you need additional help with this please ask.  I may not be the most tech savy person here but I may be able to help a little.  Here you go:
    NOTE: MAKE SURE THAT THE DESKTOP MANAGER IS INSTALLED ON THE PC YOUR USING FIRST.  I ONLY INSTALLED THE ENGLISH VERSION WITHOUT MEDIA SYNCH (to reduce download size and time)  AND IT WORKED GREAT.
    http://www.blackberry.com/btsc/documentLink.do?externalID=KB19717
    Follow the directions to the tee and it should work fine. 
    PS:  If you have problems with your blackberry and you cant find the fix here or on CB call your carrier tech support.  If they cant resolve they are pretty quick at getting RIM on the case and resolving without you getting charged for it.  Verizon was helpful at that and when I spoke with BB tech support they were extremely helpful.  I was very impressed.
    I hope this helps all of you with this problem.  Good luck out there!!!!

  • Pictures will not load to memory card

    Palm Treo 650 with 4gb memory card.  It takes pictures but gives the message "cannot load file" when I'm trying to load it to the memory card.  Pictures will load to the internal memory if set that way, but I need to use the card because of limited resources in the Palm.
    Post relates to: Treo 750 (AT&T)

    The 650 cannot use a card larger than 2GB, and it has to be a "regular" SD card, not an SD HC type.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • My pc will not show my memory card/removable disk

    Hi.
    My first MP3 player, I chose Creative Zen 4 gig, I have added an 8 gig sd card the problem I have discovered is that my PC does not list the card as a removable disc as stated in the manual therefore I cannot add files to it.
    Some advice pleas.
    regards
    Brian
    O/S XP home

    Hello NewUser2,
    Welcome to Creative forums!
    You still need to put the device in Removable disk mode. Here's how to do it:
    In the main menu, select Memory Card.
    Select Removable Disk.
    Connect your player to your computer using the supplied USB cable. Your memory card appears as a removable disk under My Computer in Windows Explorer.
    Use the drag-and-drop method in Windows Explorer to copy files to and from your memory card.
    When you have finished copying files, safely disconnect your player using the Safely Remove Hardware icon on the Taskbar.
    Warning!
    DO NOT disconnect your player, or attempt to remove the memory card, when files are being transferred. Disconnect the player only when file transfer is complete.
    Notes
    When you select Removable Disk, you view the contents of your memory card only, not the contents of your player. Playback stops when you select Removable Disk.

Maybe you are looking for