64-Bit Windows 7 Load Driver Installation Problem

I am new to Mac and have recently got my hands on a new 17" MBP.
The MBP is a 2011 model dating from about May.
Not wanting to step 100% away from Windows I want to install Windows 7 as well and run Mac OS.
I have tried installing Windows 7 32-Bit and it worked absolutely fine - no problems at all.
However, when I tried to install 64-Bit Windows 7 I ran into a problem very early on in the installation.
Before the part where you select the partition to install Windows on, I get a "Load Driver" message which reads:
"A required CD/DVD drive device driver is missing. If you have a floppy disk, CD, DVD, or USB flash drive, please insert it now."
I cannot eject the DVD to replace it with the Windows Support DVD that I burned (which I assume has the relevant drivers on), so I am a bit stuck.
I tried googling and a few people suggested burning the disk at a slower speed, which I did and it made no difference at all.
The fact that 32-Bit works lets me know I am doing things right, there must be something about the 64-Bit that the MBP doesn't like.
Any help much appreciated. I have 8GB RAM and would like to use it all with both Mac OS AND Windows so 64-Bit is preferred.
Thanks in advance.

Hi guys,
I have exactly the same problem.
I have a macbook pro 15 late 2011 and I tried for hours to find a driver for superdrive but nothing at the moment...
If someone could help us it would be great
Thanks

Similar Messages

Officejet 4500 G510g-m | Windows 7 Driver Installation Problems

Hello!
I've just purchased a new Acer Aspire One 722 laptop running on Windows 7 64-bit for work and I'm having some problems getting it to play nice with the all-in-one at work. The model is an Officejet 4500 G510g-m and though I still have the CD, it seems to be of little help. Whenever I run any of the HP diagnostic tools, they attempt to download the full software suite (I assume, since it's the same 373MB package) and extract it, only to go back to step one of discovering the device and starting the download all over again.
I have tried running the Solution Center installer directly from the disk, at which point I get the 2732 error. I've uninstalled and reinstalled Flash to attempt to circumvent that error to no success. I have downloaded both the basic and the full driver suite from the HP site and attempted installation multiple times, using the scrubber in between to ensure a clean slate. I've copied the files from the CD to my computer and tried to install more directly, with exactly the same results, yet the printer continues to show up as problematic under the "Printers and Devices" window, troubleshooting which just returns me to the endless cycle of downloading a driver that seems to not want to install.
At this point, I haven't the faintest clue what's causing the problem, so I'd greatly appreciate any insights!
Thanks for your time in advance.

Hey Kyramor,
If you visit this link you can find the print and scan driver without the full feature software:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=3919449&
This installation via this method.
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Instant Client on 64-bit Windows 7: Driver does not appear in System DSN

Instant Client on 64-bit Windows 7: Driver does not appear in System DSN tab when creating a new Data source.
What I did so far:
I downloaded the basic and odbc zips for Window 64-bit.
Unzipped the basic zip.
Unzipped the odbc zip to the same directory.
Added the dir path to the System Environment Variable called Path.
Double-clicked on the odbc_install.exe to run it from Windows Explorer.
Then I tried to add the driver to create a new data source but it does not appear in the list of drivers.
From a cmd window, I navigated to the instant client directory and tried to run odbc_install again.
I got the message: Oracle ODBC Driver with same name already exists.
What am I missing?

hello, I did it like that you say,but the result also is "oracle odbc driver with same name already exists". I don't kown what can I do it ,Thank you!

How to develop 64-bit Windows device driver for NI-6602?

Due to the fact that NI-VISA doesn’t support 64 bit Windows, how can I do to develop a 64 bit Windows device driver for NI 6602 (Counter/timer) PCI card. The possible jobs include:
Develop a Windows Kernel Mode Driver (“Device Driver”);
Make it to comply with VISA in order to utilize “osiBus Generic IO Interface” and MH DDK.
Could anyone please give me some advices as soon as possible?
William Liao
Message Edited by Wiliao on 07-22-2005 04:12 PM

Hi All,
I am currently working on getting the health parameters
from the motherboard like voltage fan and temperature. I have already
already done this using 32 bit winio driver but i am not able to work
on 64 bit version. is there any driver availbale in 64 bit for
obtaining this parametes or some one help me to get a 64 bit winio
driver.
Regards,
Senthil prabu R

MSI - NX6800 GT driver installation problem

Hello,
I've got a tricky problem, i'll try to give as much details as possible, so if i forget something, just ask =)
My Configuration :
Motherboard : Asus A7n8X Deluxe (first version)
CPU : Athlon XP 2400+
RAM : 1.5Gb (DDR Ram)
Graphic Card : MSI - NX6800 GT (256 Mb)
Hard Drives : 80GB(Western Digital) and 250Gb(Hitachi)
Ok, i haven't put too many hardware informations because apparently the problem isnt coming from the hardware side.
First, i've been running with this configuration (just without the second hard drive), for a year and a half, on Windows 2000, and it's been working fairly fine. No problems detected.
i've acquired a second Hard Drive a few weeks ago (the 256 Gb one), so i've decided to put a fresh install of XP on it.
Installed XP without any problems, but it's while installing the drivers that the problem popped up.
I've installed Windows XP Professional on my newly acquired Hard Drive (the 250Gb one), and then tried to reinstall the latest NVidia Drivers for the Geforce.
I've first installed the drivers of the motherboard (1.16 from Asus), then i installed Direct X 9.0c, and i finally installed the latest Nvidia drivers for GFX Cards (91.31).
Unfortunately, right in the middle of the installation of these drivers, the screen switched to black, then went to sleep mode (like if there was no video output). Finally the computer reboots, and i have to use the latest working configuration to be able to go back to Windows XP again.
I've tried with different versions of the drivers for the motherboard and for the Geforce 6800 GT, but still the same problem.
So for now i'm still using only my first Hard Drive with Windows 2000 on it, till we find what to do to solve the problem. (and since it works on Windows 2000, the problem can only be a software one).
Thank you in advance for your help!
PS : Here is the detail of the 1.16 drivers from Asus :
This nForce WinXP driver package contains the below components:
Audio driver 3.14 (WHQL'd)
Audio utilities 3.07
Network driver 2.81 (WHQL'd)
GART driver 2.78 (WHQL'd)
SMBus driver 2.75 (WHQL'd)
Memory controller driver 2.75 (WHQL'd)
IDE driver 2.70 In The Box (WHQL'd)
IDE driver 3.07 Full Driver
Installer 3.11

I've already tried the Vid Card on another comp, and it works without any problems there.
I've been making an hypothesis, though the chance that its coming from that is very slim i think.
A bit more than a year ago, there was a storm(pretty violent and really near my house), and my comp was plugged on (though it was shut down). After that incident, 2 USB slots of my mobo were dead, along with one network card on it. But the rest was working fine. So i've been working if it couldnt have affected a bit the rest. I have no idea how it works whn installing new drivers, about the tests it does with the system and hte hardware. But if it tries to take full power on the vid card, it might be that. I dont know how i could verify that though.

SB X-Fi Driver Installation Problem (X-Fi does not install on Asus A8N-VM CSM

Dear forum members,
I want to install Soundblaster X-Fi Xtreme on my Windows XP x64 Professional computer, but i am not able to succesfully finish 64bit X-Fi driver installation. Whether i use newer x64bit X-Fi beta driver or older official x64bit X-Fi driver, the installation of the driver stops at the end of the installation, when "CTDVINST.DLL" file is being installed and MY COMPUTER REBOOTS instantly. After the reboot, i am being asked to install Soundblaster X-Fi driver again and again. So all the X-Fi software installs well, but when i want to upgrade to x64bit drivers downloaded from Creative web site, the installation process reboots my computer right at the end of it, when "CTDVINST.DLL" file (it seems to be the last file in the driver package) is mentioned.
Help me please solve this problem, so that i can use my new Soundblaster X-Fi Xtreme on my computer soon.
Thank you very much.
Michal D.
My computer specs: AMD Athlon 64 3200+ venice, microATX Asus A8N-VM CSM motherboard (socket 939, nForce 430), Seagate Barracuda 60GB SATA II 7200.9 hdd, LG GSA-467BRL DVD-RW, 2xGB DDR PC3200 Corsair VSGB400C3 dual channel memory, XFX gf 7600GT (PV-T73G-UDF3) graphics card, WiFi PCI card Asus Wl-38g, 420Watt power suply, Microsoft Windows XP Professional x64 Edition.Message Edited by misadlouhy on 06-2-2006 2:03 PMMessage Edited by misadlouhy on 06-3-2006 05:09 AMMessage Edited by misadlouhy on 06-3-2006 05: AM

any help would be most welcome
--------------->
- new Windows installation did not help,
- it is not caused by x64bit operating system, beacuse it did not install neither on Win XP 32bit
- i tryed both driver updates (2 and 3) on both operating systems
- i tryed to start driver installation from X-FI Driver\Drivers\Support\ctzapxx.exe, no change at all
- i tryed to uninstall previous driver first through ctzapxx.exe as well
- i tryed to install the driver on fresh installation of both Windows XP x64bit and x32bit
driver installation reboots the computer just a percent before it should finish, allways, no matter how i try to install the driver
i have heard about Creative sending to some owners of nForce430 motherboards new version of Sb X-Fi, which works with nForce430, is it true?Message Edited by misadlouhy on 06-3-2006 05:23 AMMessage Edited by misadlouhy on 06-3-2006 05:24 AM

Dv4-3106tx: Bluetooth driver installation problem

Hi and good day,
Im having a problem with my integrated bluetooth. Before this everything works well until recently I cannot discover bluetooth device, send/receive file. And I confidently, uninstall the bluetooth driver from device manager with intention to reinstall it back using the driver included in C: drive.
However, the problem is when Windows keep install the driver with built in driver that comes with windows. I thought, ooh ok nevermind, I'll just run the setup and it will overwrite and use the Ralink/Motorola bluetooth driver instead.
But that's not the end. When I run the setup, I got this dialog
and I select "Yes, restart the computer now" and click on finish. Then the computer restart and relaunch the setup and again I got this same message again..again and again and again.
So I'm pretty much stuck now. Right now the bluetooth is installed with built in windows driver being used. But I cannot discover, send/receive file whatsoever.
Any help is much appreciated.
Thanks in advance.
This question was solved.
View Solution.

Oh my gosh. I'm completely forgot this thread.
Actually I managed to solve the bluetooth problem by:
1. Getting the driver backup files from my friend. He's using same lappy with me. I asked him to backup the driver using Driver Magician software.
2. I run the driver magician software and do the restoration. Then it requires a restart. Restart the computer
3. Upon restart, I launched the bluetooth driver installation software and it manages to complete the installation without any problem.

Live! SB022x (or any OEM model) owners with driver installation problems ... [Help 'maybe' he

Hi
Problems to get 'drivers'/'driver updates' installed for your Li've! or other SB models on XP or W2k system?
If ctzapxx.exe method didn't work either for you, have you tried 'forced' driver installation yet? If not here is what you can do.
NOTE: THIS METHOD DOES NOT WORK W/ ALL DRIVER PACKAGES, BECAUSE OF THE USED INSTALLER IS NOT THE SAME (ctcomp.dat is not available on those)
. download [url="http://members.aol.com/dvdking200/Pub/ctcomp.exe">this utility[/url]
2. download driver package (or installation ISO/rip) you want to install and extract it to your HD (you can also install Audigy X drivers for your Li've! card if you like)
3. run ctcomp.exe and point it to look from
- ..\Audio\Setup -folder, found as a subfolder in folder you extracted the ISO/rip
- 'main folder' (for. ex. AUD_EAX4DRV_0303) when you're installing driver update (data.cab must exist on that folder)
4. press Patch button
5. install your drivers by running setup.exe located
- at same ..\Audio\Setup -folder when setting up from extracted ISO
- at 'main' folder when you're installing driver update
.jtp
ADDON: ---------------------------------------------------------------------------------
I tested what ctcomp.exe makes to this installation package and here are the results.
INSTALLATION PACKAGE patched: Li'veDrvUni-Pack(ENG)
SUPPORTED CARDS by installer
BEFORE CTCOMP
;SBLi've!
;For CT4670, CT4620, M002/M003, CT4780, CT40, CT4830, CT4832, CT4870, CT4872, CT483, CT487, CT4760, CT4850
[Hardware.Map3]
ID = 00000020, 0000002, 0000002F, 0080022, 0080025, 0080026, 0080027, 0080028, 0080029, 008003, 0080032, 0080040, 0080050
ProductName = Sound Blaster Li've!
;SBLi've! 5.
;For SB0060, SB000, SB002, SB00, SB003, SB005, SB022, SB0222
[Hardware.Map5]
ID = 008006, 0080062, 0080064, 0080069, 008006A, 008006B, 008006C, 0080065
ProductName = Sound Blaster Li've!
AFTER CTCOMP listed only Li've! and older series cards
;SBLi've! 5. : For SB0060, SB000, SB002, SB00, SB003, SB005, SB022, SB0222, SB0228, SB0226, SB0223, SB0229
[Hardware.Map4]
ID = 008006, 0080062, 0080064, 0080069, 008006A, 008006B, 008006C, 0080065, 0080066, 0080067, 00000, 000000A
ProductName = Sound Blaster Li've!
;SBLi've! : For CT4670, CT4620, M002/M003, CT4780, CT40, CT4830, CT4832, CT4870, CT4872, CT483, CT487, CT4760, CT4850
[Hardware.Map4]
ID = 00000020, 0000002, 0000002F, 0080022, 0080025, 0080026, 0080027, 0080028, 0080029, 008003, 0080032, 0080040, 0080050
ProductName = Sound Blaster Li've!
;For SBPCI 52 : CT4790, CT4820, SB050
[Hardware.Map4]
ID = 0080023, 0080050, 008007
ProductName = Sound Blaster PCI52
;For SBPCI 256 : CT4890, CT489, CT4893
[Hardware.Map4]
ID = 008002A, 008002B, 0080033
ProductName = Sound Blaster PCI256
= No SB0220 support available? SO, IS THERE exactly a model numbered as SB0220 AT ALL?
I think there is not.
.jtpMessage Edited by jutapa on 07-04-2006 08:6 AM

The reason i said this should be a sticky is that these boards move so fast that its impossiable for new comers to keep up with threads that have AWESOME tips that may or may not help but how many of us have accually gone through every post in the last 60 days to try and find a fix? I know I have not, but in the end you need to try everything you can.
Something like this is not on the Creative FAQ data base so the only people to know about this possiable fix are the few who catch it in time.
In my experience there is ALWAYS more than way to do things and 0 ways to get it to work with 20 other methods to run it. Thats a lot of ways to do the one thing. So unless we have a huge data base with every possiable fix,method or forceiable way to do something then more and more people will get really upset that Creative offer no help.
Take the way Creative say to un-install drivers, man, this for the most part never works, so something like this may be the only way to get it to work for some people.
What I do is though, I copy a thread like this one and will pass it on to others if need be. Ofcause with all credit to the original poster and I never pass it off as my fix and/work.
I I like to cover every possiable aspect to do something. Ya know what i mean

ATI Xpress 1250 Catalyst 9.3 Driver installation problem

I have an ATI Xpress 1250 Radeon integrated graphics card on my laptop.
The v9.4 drivers from the AUR crash my X and hangs with no keyboard/mouse interaction.
The ATI driver website said the card required the 9.3 drivers which when installing gave this error:
http://support.amd.com/us/gpudownload/l … ng=English
[08:54][utils]$ sudo sh ati
ati-driver-installer-9-3-x86.x86_64.run atidriver/
[08:54][utils]$ sudo sh ati-driver-installer-9-3-x86.x86_64.run
Created directory fglrx-install.wdkccU
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.593...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
which: no XFree86 in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/perlbin/site:/usr/bin/perlbin/vendor:/usr/bin/perlbin/core:/home/chillu/bin/:/home/chillu/bin/)
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.29-ARCH; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.wdkccU
Help!

tealson wrote:
I'm not quite sure, but the ATI Xpress 1250 may have been dropped from the driver support list. AMD/ATI changed a few things there back one month or so.
Apart from this you should not try the driver from amd but test this one from aur: http://aur.archlinux.org/packages.php?ID=25105
Thank you!!
That was exactly what I wanted to know!
I was using the catalyst 9.4 drivers in the AUR and was searching for the legacy drivers from the AUR.
Thanks again! Will try and post the results.

HP LaserjetPro M277dw printer and windows vista driver installation issues

I ust got the hot off the press HP Color LaserJet Pro MFP M277 which seems to be a miraculous machine. Just one problem. When trying to download and install the printer driver it goes through the whole process and then tells you the driver will not work with this operating system.
Hmmm. It says on the HP website that this is the correct software for this machine. I have been through at least 10 HP support people up to Level 3 support and hours of online work with HP people trying to install the software. The word I get back is that it will not work with my machine. So I am wondering if I have a Windows Vista 64 bit machine, and the software says it is for that machine, but it wont load, what machine will it work with? The last person I worked with just told me I will need to get a new computer. I thought I just bought a printer that would work with my computer, and now I am told i have to buy a new one?
Any ideas on how to get the software to load? I have some functionality, such as wireless network printing that one technician was able to get to work, but no scanning. Another technician changed all the permissions for installing various programming segments to "everyone" but that didnt work either. He had it so messed up that the it would not print anymore wirelessly either. I had to restore to an earlier date after that guy got off my computer so i could at least get some functionality back.
So, without the driver, I cannot scan to this computer, and i really dont know what other good things i am missing out on because I have never experienced the correct configuration......please help if you can. I need to send the machine back within a certain time period, and I really do think it is the solution for my business, if I could get it to work......Thanks!
PS Direct connection to computer and downloading software that way does't work either.....cannot use the printer directly connected.....

Hi,
Is it the following one ? If not, please download then try again:
http://ftp.hp.com/pub/softlib/software13/COL60646/kj-145845-1/HP_LaserJet_M277_PCL6_Legacy_Print_Dri...
By the way, what is the model of your Lasejet M277 printer ? Must be M277 something.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Envy 5640 - Windows Vista Driver Installation Error - Please Help

Hi
Having problems installing the supplied (and downloaded) driver for our new HP Envy 5640 on my daughters Sony Vaio running Vista.
The printer is up and running and working perfectly on our iOS and OSX Mac devices.
The PC can see and communicate with the Printer.
But when I go to install the supplied (and the downloaded) driver/software it comes up with the following error:
<<
Install Failed
The software required for your printer could not be installed.
For more information click the Details button below.
DETAILS...
The unsuccessfull instalation will be cleaned up, and then you will be guided through searching for and applying a solution to this issue.
>>
Then when DETAILS... button pressed:
<<
Installation Error
Key not valid for use is specified state.
>>
I haven't entered a key, nor a state? I'm in the UK.
Any ideas?
Thanks in advance
Dave

Hello there! Welcome to the forums @Stodgy70
I understand you're facing troubles when installing your Envy 5640 on a Windows Vista system.
After researching the error you're receiving, I would suggest creating a new User Account on the computer and ensuring it has Administrator Privileges, and trying the installation again from there.
Here is the direct link for you to download and install the printer on Windows Vista:
HP ENVY 5640 e-All-in-One Printer series Full Feature Software and Drivers
Please let me know the results, have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Windows 8.1 installation problems

Hello Support team,
I have an issue upgrading my system to windows 8.1. When I try it to update via the store i get the following error message:
Something happened and Windows 8.1 couldn't be installed. Please Try again. Error Code
0x80073bc3
I already contacted Microsoft first level and second level support but they could not help me. When trying to install Windows 8.1 fresh we got the following error message:
But my Windows partition C: has 90.6 Gigs of free space. Sounds enough.
Second level support found out that I don't have an entry in my msconfig boot tab page:
Not silly I think this can be fixed with the HP troubleshooting tools but then I got the following when trying to start them:
This error code I know. Its the same as in the first one. So HP support how get I an entry into my msconfig boot tab like the Microsoft level 2 support say it is needed and that I can update my laptop to windows 8.1?
Regards
Michael

I found this page on the forums at answers.microsoft.com. Towards the bottom there is someone saying they had the problem and the cause was software for a specific brand of mouse or headphones. If you are using the same type, maybe this is the cause of your issue.
0x80073BC3 - 0x40017 Error - Updating to Windows 8.1
Have you made a backup of the data on the hard drive? If you do have a your data safely backed up then you may want to try a system recovery, which will restore your notebook to its factory installation. Then try your operating system upgrade.
Performing an HP System Recovery (Windows 8)
Troubleshooting HP System Recovery Problems (Windows 8)
When you do your upgrade to windows 8.1 though, make sure to also update the drivers for your computer to the windows 8.1 versions if required.
HP Pavilion g7-2245sg Notebook PC Drivers
It may be the fastest alternative, since you have already been trying to resolve this with Microsoft.
Let me know, and good luck.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Creative Suite 5.5 on Windows 7. Installation problem of Acrobat X Pro with error code 6

I can install all other programs in this Suite including photoshop and AI ..in design...etc
But installation failed for Acrobat X pro with the following message even I tried turning off my Anti-Virus or restarted my machine to use Safe mode ....
the following is the error message:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW025, DW050 ... WARNING: DW024, DW025 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 11 error(s), 5 warning(s)
WARNING: DW024: The payload: Adobe Photoshop CS5.1 Core {08EF22BC-43B2-4B4E-BA12-52B18F418F38} requires a UI parent with following specification:
          Family: Photoshop
          ProductName: Adobe Photoshop CS5.1 Core_x64
          This parent relationship is not satisfied, because this payload is not present in this session.
ERROR: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has required dependency on:
          Family: InDesign
          ProductName: Adobe InDesign CS5.5 Icon Handler x64
          MinVersion: 0.0.0.0
          This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
          Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has recommended dependency on:
          Family: Adobe Web Suite CS5.5
          ProductName: Adobe Media Encoder CS5.5 X64
          MinVersion: 0.0.0.0
          This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
          Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {D8CCCF4C-C227-427C-B4BE-736657D2AB7E} has recommended dependency on:
          Family: Adobe Web Suite CS5.5
          ProductName: Adobe Media Encoder CS5.5 X64
          MinVersion: 0.0.0.0
          This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
          Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
          Family: CoreTech
          ProductName: Adobe Player for Embedding x64 3.1
          MinVersion: 0.0.0.0
          This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
          Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
          Family: Shared Technology
          ProductName: Photoshop Camera Raw (64 bit)
          MinVersion: 0.0.0.0
          This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
          Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
          Family: CoreTech
          ProductName: AdobeCMaps x64 CS5
          MinVersion: 0.0.0.0
          This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
          Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
          Family: CoreTech
          ProductName: Adobe Linguistics CS5 x64
          MinVersion: 0.0.0.0
          This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
          Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
          Family: CoreTech
          ProductName: AdobePDFL x64 CS5
          MinVersion: 0.0.0.0
          This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
          Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
          Family: CoreTech
          ProductName: AdobeTypeSupport x64 CS5
          MinVersion: 0.0.0.0
          This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
          Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
          Family: CoreTech
          ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
          MinVersion: 0.0.0.0
          This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
          Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has recommended dependency on:
          Family: Adobe Web Suite CS5.5
          ProductName: Adobe Media Encoder CS5.5 X64
          MinVersion: 0.0.0.0
          This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
          Removing this payload from the dependency list.
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

my window 7 is English version, which is the same as this design Suite. I can install other programs like Photoshop which is included in this Suite, but I just can't install Acrobat X Pro...so I think it's not language problem... anything else could possibly cause this? thanks!!

How can I fix Intel 5 series/3400 USB driver installation problem?

I am using Boot Camp to install Windows 7 64 bit on an iMac (mid 2010). After Windows and Apple Windows drivers are installed, I get an error message about the Intel 5 series/3400 Series Chipset Family USB Universal Host controller 3B3B failing to install. Reinstalling the driver does not work. I get the yellow triangle with the exclamation mark on the computer icon in the list of devices, indicating there is a problem.
I searched for this problem on the Apple website. I found info about this exact issue with the MacBook Pro, (mid 2010), Windows 7 64 bit and Boot Camp. The article said to ignore it, that this wouldn't be a problem. Would this also not be a problem for my iMac?
Any comments or suggestions?
thanks, Kevin

Have you done:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
What results do you get when you run this:
iTunes for Windows: Device Sync Tests
Do both the Home button and Power button work OK normally?

Photosmart B110a driver installation problems

I have a recent problem which began with being unable to print from my netbook. On devices and printers I have an exclamation mark next to my netbook. On running troubleshooter it tells me I have missing drivers but when I try to download them from the internet they fail.
My deskjet computer is now also showing the same problem though it is still printing.
I did find a link to a website on the forum which seemed to sort out my netbook temporarily but I cannot find it now.
I am using Windows 7 64 bit on my desktop and Windows 32 bit on my netbook.
I'd very much appreciate any help.

The fatal error you got with the B110a is caused by an .msi error. The document below should walk you through that.
Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
The fatal error you got with the B109a might have a different fix. It would depend on the exact error code you received. The document below should help you find the error code and work through the fatal error.
A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

64-Bit Windows 7 Load Driver Installation Problem

Similar Messages

Maybe you are looking for