645ultra black screen flashes

when i put the sis agp drivers on it says 4X agp ...
but the screen periodicly goes black and locks active apps up usually when im doing something (clicking a button)
and whatever was active at the time leaves bits of itself all over the desktop.
when i remove sisagp driver (ive tried latest and older ones) it works fine but in pci mode  ;(
i got msi 645ultra v1.0
      msi gf4 ti4800se
      p4 1.6
      and im using win2000pro
      latest detonators and windows2000 is fully updated.
      and all hardware is latest drivers and no apparent    problems with anything else.
ive looked around and im not the only one to experience this problem.. on this forum same issue but slightly diffrent hardware and the solution offered there was not applicable, the other places ive seen same problem theres no solution found!
ive tried sending email to msi but thats a whaste of time
so far atleast.
if anyone knows how to stop it messing about, tell me plz.  

well...
im gonna upgrade my  then
is it worth getting msi stuff (mobo and gfx)
any one recomend latest msi stuff
what is it?
for a pentium4 ??

Similar Messages

  • When Mac reboots to Install XP black Screen Flashing Dash (-) stuck.

    when Mac reboots to Install XP black Screen Flashing Dash and I think its the press any key screen but on a Mac its Just Flashing Dash .
    I press every button going and nothing happens.
    and my only option is to turn off the mac to boot back in OSX.
    MacBook trying to Install Windows XPSP3 disk.

    I too am having the same problem. I do not know about the host of this thread, but I have been using a brick and mortar version of XP SP2 stand alone so it is not bundled with a computer like Dell, HP, etc.
    I have run it before just fine but it was time to reformat the drive, 0'd everything out, reinstalled 10.5.2, upgraded everything, repaired permissions and them ran Boot Camp. Put in the XP disc and all I get is the flashing dash mark in the upper left hand corner. I actually have 2 legal versions of XP SP2 stand alone and the same result on both discs so it has to be something with the partioning? I also redid the partitioning at various sizes all with the same effect. No luck.
    Any new thoughts anyone?

  • IPhone 4s on screened Window Sill on rainy night - BLACK SCREEN, FLASH ON, VIBRATING, how do I revive?

    Lastnight I left my Iphone 4s CHARGING on a screened window sill.
    I wokeup at 8:30 and checked my phone to see that it was completely fine; went back to sleep until 10:30 and woke up to a black screen, flash on, and the phone frequently and randomly vibrating.The phone was not overly drenched. Only a couple raindrops on it, and around it.
    I immediately stuck it in a bag of rice.
    I need solutions! Any help is appreciated!
    How long should I keep it in the bag of rice?
    Is there a way to turn off my phone with a black screen?
    Thank you for your help!

    Just wind it by dryer and then don't try to switch it off because any electrical interchange cause damage. and then put it in a rise bucket. and in few hours it shuld be fine.. or take it to apple store if you are still in Warranty...

  • Black screen flash for 0.1s after unlock by Touch id or passcode

    1.Black screen flash for 0.1s after unlock by Touch id or passcode.
    2.It only occur in different wallpaper set on Home and Lockscreen.
    3.Black screen doesn't appear if Same wallpaper set on both Home and Locksceen.
    4.Suspecting a software bug.
    5.Hopefully fix it on next IOS updates.
    Hardware:iphone6 16G silver HK version. iOS:8.1

    Yep, got the same here, I've done full restore from backup, suspected i had a problem, till I read the above comment. thanks
    Hardware :iPhone 5s 64G space gray version iOS:8.1

  • Black screen flashes before opening gmail

    Hi, recently I updated to Firefox 4.0. Since then, every time I visit gmail.com a black screen appears. After a split second it disappears again and the usual gmail log in screen shows up. Why is that and how can I get rid of that black screen flashing before gmail loads? Has it something to do with the ad-ons adblock, flashblock and noscript I installed? They never caused any trouble in Firefox 3.x

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • Satellite Pro L300 - Black screen flashing cursor

    Hi all,
    I have a Toshiba Satellite Pro L300 laptop running Vista.
    The client brought it in because when it boots it goes to Toshiba splash screen then goes to black screen with flashing cursor in left top corner. I have connected external monitor with same result. Swapped out RAM as well.
    Have run Memtest (passed), Seagate HDD long test (passed), Ultimate boot CD, and Winternals with no success.
    *F8 does not work* and nor does Factory recovery.
    Can get into BIOS F2 and F12 no problem and the HDD is listed there.
    I reinstalled Vista from CD and when rebooted it goes back to flashing cursor. I have attempted Startup repair from Vista CD and System restore. FixBoot from Command Prompt and FixMbr as well with the same result.
    I have a feeling it may be a corrupted CMOS? It is like the OS installs properly, but the computer loses it's memory on reboot of where the OS is located?
    Is the CMOS battery easily accessible and removable on this model?
    Has anyone encountered these symptoms? Is it fixable cheaply?

    Hello
    If you have clients I presume you are some technician and hope you have some hardware parts in your store.
    Have you tried to set BIOS to default settings and check it again?
    If possible try to exchange HDD and test the functionality again.
    Can you use notebook with Linux live CD (HDD not needed)?
    To be honest I dont think problem is BIOS and, in my opinion, CMOS battery exchange is not necessary.
    Test it please with new HDD and post some feedback.

  • WORK AROUND: Black screen/flashing cursor trying to boot windows cd

    This refers to the black screen with flashing underline cursor in the top left corner problem that happens after using bootcamp to setup your partition & then rebooting with the windows install CD in the driver. Install never starts, you just get this black screen with flashing cursor. seems to affect many different types of macs attempting to boot both XP & Vista.
    I tried rebooting about 10 times. No luck. Same problem. Tried running disk verify/repair after removing partition, no luck. Remade boot camp partition, no luck.
    Finally I pointed Parallels (free trial available) to my blank bootcamp partition and set parallels to boot from CD before HD. Parallels booted the Vista install CD just fine, and put Vista on my HD. Crashed at the end though and said it couldn't make the boot camp partition bootable so all changes were removed. Rebooted under boot camp and the installer came up fine off the CD. I'm now running vista (SP1 even) under bootcamp just fine. Parallels just lets you get past that boot-up bug.
    So if you have this problem, and nobody else can help, and if you can find it, maybe you can download..... Parallels.
    Feel free to post this on the other threads. Unlike other workarounds I'm guessing this will work for everyone and it only takes a free trial download of parallels to give it a try. Just remember to setup the virtual machine to use the bootcamp partition as the target drive, and then go under the edit virtual machine, then OPTIONS, then BOOT tab and set it to boot from cd before HD. Switch it back when you are done.
    Then run boot camp assistant again and select the install OS option. Should run the installer correctly (thus overwriting anything parallels put on the partition).
    I think VMWare Fusion also supports vitualization with the bootcamp partition as the target so that may help you get around this problem.

    I have resolved this issue for four of our iMac computers with either of the following solutions. I realize that these solutions might seem awkward, but these solutions have been the only solutions that have successfully resolved this same issue for four different machines.
    Solution 1
    On the Mac OS partition, leave the Boot Camp partition that has yet to be configured.
    Leave the Windows install disk in the optical drive.
    Shut down the computer.
    Unplug all cables.
    Hold the power button for a minimum of 5 seconds.
    Plug in all cables.
    Turn the power on.
    The computer will proceed to install Windows.
    Solution 2 (If Solution 1 fails)
    On the Mac OS partition, leave the Boot Camp partition that has yet to be configured.
    Remove the Windows install disk from the optical drive.
    Shut down the computer.
    Unplug all cables.
    Hold the power button for a minimum of 5 seconds.
    Plug in all cables.
    Turn the power on.
    A black screen will appear prompting for a bootable disk.
    Load the Windows install disk.
    Shut down the computer by holding the power button.
    Turn on the computer.
    The computer will proceed to install Windows.

  • Black Screen Flashes!!

    Once in a while, while i'm using "google" to search for something as i type or backspace using the keyboard the screen starts flickering a black screen. It would flicker once or twice as i'm typing. Nothing to bothering. i'm just concerned that it may lead to something worse if i go on without doing something about it. Has anyone else had the same problem and what have you done to stop it from doing that? Thanks in advance.

    well...
    im gonna upgrade my  then
    is it worth getting msi stuff (mobo and gfx)
    any one recomend latest msi stuff
    what is it?
    for a pentium4 ??

  • Random Black Screen Flash Macbook Air and Apple LED display

    So I have started to see an issue with the new Macbook Air and my Apple LED 24" display. Randomly only maybe 2-3 times a day the screen will go black and then quickly come right back, like a blink. Anyone else see this behavior? This does not happen with the internal built-in screen on the MBA. Feels like a driver or software issue to me.

    Hi Steve,
    I have the same model you've mentioned. Although my issue is not the same, at times when I open my laptop up, I have a black screen, and have to manually power-down. I can tell the keys still work, as I use the brightness buttons and can tell the contrast is getting higher.
    Also last night my keyboard/trackpad stopped working, however the power button did bring up the shutdown options but the trackpad still did not work.

  • Black screen flashing while playing BF4

    Currently using my GT80 titan display port out to a UD590 and ill randomly get black screens while playing almost like a loss of video out to the monitor. I've tried this with HDMI and get the same issue. This is with latest 980m drivers. Anyone had this problem before?

    Would a lower resolution on UD590 be helpful? How about other monitors, still happen? The native driver shipped with the laptop get the same failure?

  • Black screen flashing constantly recent upgrade to Yosemite

    I upgraded to Yosemite yesterday on my brand new macbook pro with retina display and this morning i had some issues with my fonts so as i was looking in the library folder to try and find the font problem all of a sudden my screen went black and then started flashing every second to the normal screen and back to black. Now i can't even log in with out it constantly flashing black - can anyone help as i've no idea what i've done to it or how to resolve the issue because i can't get onto it!

    I managed to solve mine by rebooting my mac in recovery mode (hold down cmd + R when you turn on) then reformatting and re-installing OX S Yosemite. Unfortunately it means loosing all your stuff but it's stopped the problem for me! Hope this helps.

  • Sudden video crashes/black screen flashing with MSI GTX 680 + MSI GT 640 (PhysX)

    I've been running an MSI GTX 680 Lightning + MSI GT 640 (dedicated PhysX) setup since last September with excellent results. Most of my Steam games would crash in less than 10-15 minutes before I added the 640.
    Just this week, however, I've noticed a new and different problem. While playing several different games, the monitor randomly flashes black, then the game stutters and finally my whole system crashes. I've never seen this before. The only thing that seems to correct the problem is to scale back the resolution from 2560x1600 to 1920x1200 or even 1280x800.
    The problem seems to be getting worse. Now, while doing anything on my PC, the system freezes briefly, the screen rapidly goes black, then turns back on and system unfreezes. This happens 3-5 times in a cycle then stops. The cycle repeats every few minutes and happened twice while typing this post.
    I've got the latest graphics and other component drivers installed. All diagnostics say the video cards are working properly, but these problems persist.
    Are these indications of failing video cards? Any/all suggestions appreciated.
    My system specs: MSI GTX 680 Lightning 2GB, MSI GT 640 1GB (dedicated PhysX), i5-2500K, Asus P8Z77-V, Coolermaster V8, 16GB Corsair Vengeance 1600, 4TB storage, Corsair HX1000, Dell 3008WFP, Windows 8 Pro 64-bit.

    First of all remove the GT640 so we can check if the issue is solely related to the GTX680. Then monitor temps in load and idle using Afterburner (>>How to use MSI Afterburner<<)
    If problem presists when not using the GT640 remove current drivers in safe mode using >>Driver Fusion<< and install latest MSI driver (http://www.msi.com/product/vga/N680GTX-Lightning.html#/?div=Driver&os=All). Yes, I know that driver is older than Nvidia one but it is a surely working one with the special MSI design and features.

  • Black Screen Flashing Red LCD light

    Is my blackberry dead? The screen is like the unit is off. Nothing shows up and the red LCD light keeps flashing. I've reset the unit and left the battery out all night. Is there any other way to reset the unit? Any insight would be helpful.

    Dear Blackberry Servicer 
    On my blackberry 9300 Curve i had brought it 9MONTHS ago and i left it to charge and when i went to get it my LCD light kept flashing when i tried to turn it on the LCD light kept flashing but my screen was blank  and it has happened for 2months
    Following things i did :
    Take out the battery and inserting it back in (1000 Times)
    Check on Youtube for an solution 
    Check Google 
    Tried to take out my sim and turning it on 
    And none of them worked  and im getting frustarated  so please can someone help because i cant speak to my friends and by the way im using my mom's phone to type so please fix this problem 
                                        Yours Jaskirat Aujla

  • Laptop Black screen flashing Caps Lock

    Hello. I have a HP ENVY 17-j130ea which i purchased a couple of weeks ago and decided to put a mSATA SSD in there for the cache drive.
    I installed the mSATA drive, but when i put it back together i forgot to put the HDD in. 
    When I turned it on it came up with a message saying there was no OS installed then the screen went blank.
    Now when i try to turn it on with or without the mSATA or HDD in, the screen stays blank and the caps lock blinks twice every three seconds.
    I have tried leaving it for 5 minutes, I have unplugged it, taken the battery out and held the power button down for 1 minute, I have made a bios recovery key and turned it on with the 'Windows' and 'B' button held down and it does the exact same thing every time.
    TLDR; I put a mSATA drive in my laptop and it is giving me a BIOS error and no matter what I do, I am unable to fix it.

    I have a little more to add
    If I turn it on normally, nothing happens on the memory stick (no lights or anything)
    If I turn it on while holding down Windows and B, the memory stick turns on after about 15-20 seconds, the light flashes for about 5 seconds then it stops flashing, it just sits on a solid light.
    Its almost as if it is searching the memory stick for the files but fails to find them.
    I used sp65000.exe to create the recovery stick

  • Pavilion dv6-3040sa, black screen, flashing caps lock

    Hey all, In need of some help for a friend, her laptop has had this issue for a while now and only just come to me for help. Her HP Pavilion DV6-3040SA has an odd issue with it, if you power it up the display doesn't come on and the caps lock just flashes, it will continue to flash until the laptop is turned off. On the help section a flashing caps lock does not refer to any particular error. I've reseated RAM, tried hard resetting, reseated the CPU and it managed to power up, then after it was turned off, it wouldn't power up again and had the same issue, after playing with it some more it powered up and worked for 2 days, when it promptly stopped working again. Any reason for this issue? 

    Processor failures can be have inconsistently.  I have seen processor failures start with 1-2 second hangs in the OS to working one day and not at all the next. 
    The blinking code you have desribed is a beep code of one.  Review the following table found here.
    Caps Lock/Num Lock
    1
    CPU
    CPU not functional
    Reseat replace CPU.
    Service
    Caps Lock/Num Lock
    2
    BIOS
    BIOS corruption failure
    Restore BIOS from onboard backup (jumpers)
    Service
    Caps Lock/Num Lock
    3
    Memory
    Memory module error not functional
    Reseat memory modules (see next section).
    Test memory from UEFI or BIOS.
    Replace bad memory modules.
    Service
    Caps Lock/Num Lock
    4
    Graphics
    Graphics controller not functional
    Service
    Caps Lock/Num Lock
    5
    System board
    General system board failure
    Service
    Caps Lock/Num Lock
    6
    BIOS
    BIOS authentication failure
    Restore BIOS from onboard backup (jumpers)
    Service
    The options for a blink code of 1 is to reseat the CPU as you have already done or to replace the processor.  Since the issue returns after reseating the CPU, it looks like the CPU needs to be replaced.  Sorry. 
     

Maybe you are looking for