674 ERROR: Message operation failed because of a bad address

On our tuxedo server we have the following error that is repeatedly writen on its log:
155140.RJODIGD02!sid_server_ro.778390.1.0: ERROR: msgrcv err(LIBTUX_CAT:674: ERROR: Message operation failed because of a bad address): errno=14,qid=27729940,buf=3299838207512,bytes=1049340,type=-1073741824,flag=0
This error does not affect the Server functionality but we would like to know by what could be due:
we have seen the error description but from this we could not find out the real causes:
674 ERROR: Message operation failed because of a bad address
DESCRIPTION
msgsnd to a queue failed because the message pointer is pointing to an illegal address.
ACTION
Check the address of the message queue pointer, or contact your TUXEDO System Technical Support.
Any help is well accepted ......... thanks a lot in advance.
Ciao

Hi,
If I had to guess, I'd say you were looking at a memory corruption problem. The error basically says that when Tuxedo tried to perform a msgrcv() operation on a System V IPC queue, the address of the buffer to receive the message wasn't valid. Although if this is really a memory corruption problem, I'm surprised your server continues to function. You might want to try a memory checking tool to see if your code is writing to memory it doesn't have allocated or writing past the ends of an allocated buffer.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Similar Messages

  • Newsfeed error - The operation failed because the server could not access the distributed cache.

    Recently installed SharePoint 2013 RTM, on the newsfeed page an error is displayed, and no entries display in the following or everyone tabs.
    "The operation failed because the server could not access the distributed cache."
    Reading through various posts, I've checked:
    - Activity feeds and mentions tabs are working as expected.
    - User Profile Service is operational and syncing as expected
    - Search is operational and indexing as expected
    - The farm was installed based on the autospinstaller scripts.
    - Don't believe this to be a permissions issue, during testing added accounts to the admin group to verify
    Any suggestions are welcomed, thanks.
    The full error message and trace logs is as follows.
    SharePoint returned the following error: The operation failed because the server could not access the distributed cache. Internal type name: Microsoft.Office.Server.Microfeed.MicrofeedException. Internal error code: 55. Contact your system administrator
    for help in resolving this problem.
    From the trace logs there's several messages which are triggered around the same time:
    http://msdn.microsoft.com/en-AU/library/System.ServiceModel.Diagnostics.TraceHandledException.aspxHandling an exception. Exception details: System.ServiceModel.FaultException`1[Microsoft.Office.Server.UserProfiles.FeedCacheFault]: Unexpected exception in
    FeedCacheService.GetPublishedFeed: Object reference not set to an instance of an object.. (Fault Detail is equal to Microsoft.Office.Server.UserProfiles.FeedCacheFault)./LM/W3SVC/2/ROOT/d71732192b0d4afdad17084e8214321e-1-129962393079894191System.ServiceModel.FaultException`1[[Microsoft.Office.Server.UserProfiles.FeedCacheFault,
    Microsoft.Office.Server.UserProfiles, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c]], System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089Unexpected exception in FeedCacheService.GetPublishedFeed: Object
    reference not set to an instance of an object..  
     at Microsoft.Office.Server.UserProfiles.FeedCacheService.Microsoft.Office.Server.UserProfiles.IFeedCacheService.GetPublishedFeed(FeedCacheRetrievalEntity fcTargetEntity, FeedCacheRetrievalEntity fcViewingEntity, FeedCacheRetrievalOptions fcRetOptions)
     at SyncInvokeGetPublishedFeed(Object , Object[] , Object[] )    
     at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)    
     at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)    
     at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)    
     at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc)    
     at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)System.ServiceModel.FaultException`1[Microsoft.Office.Server.UserProfiles.FeedCacheFault]: Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not
    set to an instance of an object.. (Fault Detail is equal to Microsoft.Office.Server.UserProfiles.FeedCacheFault).
    SPSocialFeedManager.GetFeed: Exception: Microsoft.Office.Server.Microfeed.MicrofeedException: ServerErrorFetchingConsolidatedFeed : ( Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not set to an instance of an object.. ) : Correlation
    ID:db6ddc9b-8d2e-906e-db86-77e4c9fab08f : Date and Time : 31/10/2012 1:40:20 PM    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.PopulateConsolidated(SPMicrofeedRetrievalOptions retOptions, SPMicrofeedContext context)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.Populate(SPMicrofeedRetrievalOptions retrievalOptions, SPMicrofeedContext context)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonGetFeedFor(SPMicrofeedRetrievalOptions retrievalOptions)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonPubFeedGetter(SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType feedType, Boolean publicView)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.GetPublishedFeed(String feedOwner, SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType typeOfPubFeed)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.Microsoft.Office.Server.Social.ISocialFeedManagerProxy.ProxyGetFeed(SPSocialFeedType type, SPSocialFeedOptions options)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass4b`1.<S2SInvoke>b__4a()
    Microsoft.Office.Server.Social.SPSocialFeedManager.GetFeed: Microsoft.Office.Server.Microfeed.MicrofeedException: ServerErrorFetchingConsolidatedFeed : ( Unexpected exception in FeedCacheService.GetPublishedFeed: Object reference not set to an instance of
    an object.. ) : Correlation ID:db6ddc9b-8d2e-906e-db86-77e4c9fab08f : Date and Time : 31/10/2012 1:40:20 PM    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.PopulateConsolidated(SPMicrofeedRetrievalOptions retOptions, SPMicrofeedContext context)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedThreadCollection.Populate(SPMicrofeedRetrievalOptions retrievalOptions, SPMicrofeedContext context)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonGetFeedFor(SPMicrofeedRetrievalOptions retrievalOptions)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.CommonPubFeedGetter(SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType feedType, Boolean publicView)    
     at Microsoft.Office.Server.Microfeed.SPMicrofeedManager.GetPublishedFeed(String feedOwner, SPMicrofeedRetrievalOptions feedOptions, MicrofeedPublishedFeedType typeOfPubFeed)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.Microsoft.Office.Server.Social.ISocialFeedManagerProxy.ProxyGetFeed(SPSocialFeedType type, SPSocialFeedOptions options)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass4b`1.<S2SInvoke>b__4a()    
     at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)
    Microsoft.Office.Server.Social.SPSocialFeedManager.GetFeed: Microsoft.Office.Server.Social.SPSocialException: The operation failed because the server could not access the distributed cache. Internal type name: Microsoft.Office.Server.Microfeed.MicrofeedException.
    Internal error code: 55.    
     at Microsoft.Office.Server.Social.SPSocialUtil.TryTranslateExceptionAndThrow(Exception exception)    
     at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)    
     at Microsoft.Office.Server.Social.SPSocialFeedManager.<>c__DisplayClass48`1.<S2SInvoke>b__47()    
     at Microsoft.Office.Server.Social.SPSocialUtil.InvokeWithExceptionTranslation[T](ISocialOperationManager target, String name, Func`1 func)

    Thanks Thuan,
    I've restarted to the Distrubiton Cache servicem and the error is still occuring.
    The AppFabric Caching Service is running under the service apps account, and does appear operational based on:
    > use-cachecluster
    > get-cache
    CacheName            [Host]
                         Regions
    default
    DistributedAccessCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedActivityFeedCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedActivityF [SERVER:22233]
    eedLMTCache_1e9f4999 LMT(Primary)
    -0187-40e8-aa92-f830
    8d47d6e9
    DistributedBouncerCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedDefaultCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedLogonToke [SERVER:22233]
    nCache_1e9f4999-0187 Default_Region_0538(Primary)
    -40e8-aa92-f8308d47d Default_Region_0004(Primary)
    6e9                  Default_Region_0451(Primary)
    DistributedSearchCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedSecurityTrimmingCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9
    DistributedServerToAppServerAccessTokenCache_1e9f4999-0187-40e8-aa92-f8308d47d6e9

  • Lost itunes on pc after an update. Message said iTunes not installed.. Please reinstall. Tried to and error message "app failed because MSVCR80,dll was not found. Tried several times...same response. Finally uninstalled itunes and tried to reinstall . No

    Lost iTunes on pc after an update (Neighbor has same problem) Tried to open and message said " iTunes not installed correctly,Please reinstall itunes" . Tried to do so and same message with another message"application failed because MSVCR890.dll was not found.Re-installing may fix this problem" Tried several times and same message. Finally uninstalled itunes from computer and tried unsucessfully several times to re-install...Same messages as above appear when install looks like it's done......Help !

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Error message: sending failed because you exceeded your sending limit

    I can't send any more e-mails from my iphone 4S anymore. The message I get reads: A copy has been placed in your outbox. Sending failed because you exceeded your sending limit. My contract offers unlimited data so that can't be the problem. The problem occurred after I tried to send a photo with an address change notification to about 50 addressees from my addressbook. I have deleted that mail from my outbox but can still not send any mails.
    Thanks for your help

    Hey Hall-K,
    Since you have deleted the message and are still experiencing issues sending email, I would check out the following article and follow the troubleshooting steps within (which I pasted below):
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    If you are unable to send or receive email, try the following steps:
    Restart the iOS device.
    Tap Safari and attempt to load a webpage to ensure that the device has Internet access. If you're unable to load a webpage, try the Wi-Fi assistant.
    Try an alternative Internet connection.
    If your email is provided by your Internet provider, try connecting from the home network.
    If your iOS device has an active cellular data plan, try to disable Wi-Fi:  Tap Settings > Wi-Fi and turn off Wi-Fi.
    If not, try a different Wi-Fi network.
    Log in to your email provider's website to ensure that the account is active and the password is correct.
    Delete the account from Settings > Mail, Contacts, Calendars and then add the email account again on the iOS device.
    Hope that helps,
    David

  • The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.

    H,
    Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
    Event 1001
    Op Code NLS initialization
    The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
    We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now. 
    I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
    How do we ascertain the  cause of this error and the specific registry key that might be problematic?

    Hi,
    This could be caused by firewall rules or security softwares.
    http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
    And in addition, the fix is worth a try.
    Nothing happens when you double-click "Region" in Control Panel 
    http://support.microsoft.com/kb/2958845
    Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

  • The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

    I am having problems  saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
    The document could not be saved. The server said:
    “The operation failed because an unexpected error occurred. (Result code 0×80020005)”
    Please ensure you have completed all required properties with the correct information and try again.
    I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
    Adobe Acrobat version 10.1.13
    SharePoint 2010

    Hi quodd,,
    We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
    1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
    2. How are you opening and saving the PDF, the exact workflow?
         Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
    3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
    4. Please verify that columns name do not contain spaces or some other special characters.
       Can you try to save PDF to library with Custom template and just a single managed metadata column  with a simple name
    Thanks,
    Nikhil Gupta

  • The operation failed because of a protection agent failure. (ID 998 Details: Unknown error (0x8007620f) (0x8007620F))

    I keep getting the following error when trying to run a backup:
    The operation failed because of a protection agent failure. (ID 998 Details: Unknown error (0x8007620f) (0x8007620F))
    Any resolution to this issue is greatly appreciated. Thank you.

    Hi
    First we Need some more Informations.
    What are you trying to Backup?
    Has it worked before?
    Are there any Errors on the Agent Tab?
    Are there any Errors on the affectet Server in the Event Log?
    Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
    facebook.com/techguyat |
    youtube.com/techguyat

  • Outlook 2013 Changing Shared Calendar Appointment Categories causes error The Operation failed the messaging interfaces have returned an unknown error

    Hi
    Our user used to be able to change the categories in a shared outlook calendar appointment but is now getting the error:
    The Operation failed the messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
    We have tried re-creating the mail profile but still get the same error.
    If anyone has any other suggestions, that would be great, thanks.

    Glad to hear that it works fine in new profile. It seems your old OST file or other file in profile is corrupted. After you create a new profile, Outlook would re-sync your mailbox to a totally new OST as the data file.
    Tony Chen
    TechNet Community Support

  • Flash CS6, QuickTime: The export operation failed because it ran out of memory.

    Exporting a QuickTime movie file seems to be an old issue with previous versions too. In CS6 I always get the error message: "The export operation failed because it ran out of memory." I've got tons of memory and have allocated increasing amounts to the cache with no success.
    My small and fairly simple file was created with Flash CS5 which seemed to work fine at the time of creation. I've tried everything recommended online but with no luck so far. BTW, I reinstalled CS5 and tried that too but it just hangs now, and there's no error message.
    Does anyone have a solution?
    (OS X 10.7.4)

    If I may join this discussion...  I loaded up CS6 two days ago and have just completed my first 60 second animation using it.  Like everybody else here, it all went fine until I tried to export it to QuickTime – something that has never been problematic before. 
    I ended up exporting it as a swf and opening that in CS4.  Then I could export it, but the resulting QuickTime movie was over 500 MB in size!  Okay, so then I opened it in QuickTime Pro and exported it from there.  This brought the file size down to a far more reasonable 35 MB, but now the soundtrack has gone!  So now I am having to replace the sound in Final Cut Pro. 
    This is a real palaver – and not conducive to heaping praise on CS6 when questioned.  I note that there is talk of Adobe rectifying this "bug", but it would be really good to hear from somebody at Adobe with:
    a) An apology
    b) An estimated time of delivery
    c) A best practice work round
    But I'm guessing that anybody that works at Adobe will be the last person to read this...

  • The operation failed because of a protection agent failure. (ID 998 Details: The system cannot find the path specified (0x80070003))

    Hello,
    We are getting the following error when trying to backup our fileserver (DPM 2012 R2) to tape.
    "The operation failed because of a protection agent failure. (ID 998 Details: The system cannot find the path specified (0x80070003))"
    What is interesting:
    - The "Short-Term Protection" to disk runs successfully without error
    - The "Long-Term Protection" to tape fails after writing ~2TB of data to a TL2000 tape loader. (Always appears to fail towards end of job with the above error)
    - In the past (until roughly a month ago) the tape portion of this job was completing successfully.
    The DPM logs fail to give much information around the time of error regarding any failures. Likewise windows event logs give no hint of a problem when the job fails.
    Looking for any ideas that may help resolve this.
    Cheers!

    Hi
    Has it just started happening? What rollup version are you on currently?

  • Multi-lingual Error: The translation failed because the online translation service was unavailable

    Hi,
    We need to implement multi-lingual functionality in SharePoint 2013 on premise server. We have implemented the functionality by referring the below URL.
    http://blogs.technet.com/b/sharepoint_quick_reads/archive/2013/08/12/sharepoint-2013-variations-creating-site-and-variation-labels.aspx
    But after this once we translate any page/document, we are getting below error.
    Error: The
    translation failed because the online translation service was unavailable. Please resubmit this file for translation. If the files fails again with this error message, contact system administrator.
    Machine
    We have configured the internet over SharePoint server, also referred below url, but
    no success.
    http://blogs.msdn.com/b/weslbo/archive/2012/11/07/sharepoint-2013-machine-translations-the-translation-failed-because-the-online-translation-service-was-unavailable.aspx
    http://technet.microsoft.com/en-us/library/jj729796(v=office.15).aspx
    https://social.msdn.microsoft.com/Forums/office/en-US/dcd0e1d3-2b26-41fa-ad07-77fe234fbc23/machine-translation-service?forum=sharepointdevelopment
    If you have faced a similar issue and has any information on how to resolve this issue or how to achieve multi-lingual functionality or configure machine translation service in SharePoint 2013,
    it will be great help.
    Regards,
    Shailendra Gupta

    Hi Shailendra
    Please check this below
    http://blogs.msdn.com/b/weslbo/archive/2012/11/07/sharepoint-2013-machine-translations-the-translation-failed-because-the-online-translation-service-was-unavailable.aspx
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/a7bf9604-d652-4566-aac5-6bcb10dd6ce5/failed-because-there-was-no-translation-available-online-translation-service?forum=sharepointgeneral
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • The operation failed because of a protection agent failure. (ID 998 Details: The semaphore timeout period has expired (0x80070079))

    Recently we got this error, while backup to tape, and no idea what is it.
    What cause of this error?
    The operation failed because of a protection agent failure. (ID 998 Details: The semaphore timeout period has expired (0x80070079)
    DPM 2010 with latest roll-up (KB2250444) | DELL Server R710 (Windows 2008 R2 SP1) RAM: 24GB PF: 36-60GB | DELL TL2000 (2 Drives) | And still struggling and monitoring... :(

    Hi,
    Try this workaround, increase the TcpMaxDataRetransmissions to 10 or more.
    How to modify the TCP/IP maximum retransmission timeout
    http://support.microsoft.com/kb/170359
    Diagnostic steps when "Semaphore timeout" is hit during network transfer:
    1. Check if the protected server (sender) or DPM (receiver) was under stress or inaccessible during the time of failure – from event logs from both the machines. Retry should work if the packet loss was because of either of the servers being inaccessible
    or under stress for a period.
    2. Check if the network between the PS and the DPM is flaky – retransmit count from ‘netstat –s’ or perfmon counters can give an idea.
    3. Else contact network support engineer to diagnose the packet loss issue – netmon captures from both machines, packet route and network layout/devices will be required to start the investigation.
    4. Take some performance monitor logs on both DPM and Proteted server side.
    Some good and basic perfmon counters to take to see if the servers are under stress are below.
    Logical Disk/Physical Disk
    \%idle
    • 100% idle to 50% idle = Healthy
    • 49% idle to 20% idle = Warning or Monitor
    • 19% idle to 0% idle = Critical or Out of Spec
    \%Avg. Disk Sec Read or Write
    • .001ms to .015ms  = Healthy
    • .015ms to .025 = Warning or Monitor
    • .026ms or greater = Critical or Out of Spec
    Current Disk Queue Length (for all instances)
    80 requests for more than 6 minutes.
    • Indicates possibly excessive disk queue length.
    Memory
    \Pool Non Paged Bytes*
    • Less that 60% of pool consumed=Healthy
    • 61% - 80% of pool consumed = Warning or Monitor.
    • Greater than 80% pool consumed = Critical or Out of Spec.
    \Pool Paged Bytes*
    • Less that 60% of pool consumed=Healthy
    • 61% - 80% of pool consumed = Warning or Monitor.
    • Greater than 80% pool consumed = Critical or Out of Spec.
    \Available Megabytes
    • 50% of free memory available or more =Healthy
    • 25% of free memory available = Monitor.
    • 10% of free memory available = Warning
    • Less than 100MB or 5% of free memory available = Critical or Out of Spec.
    Processor
    \%Processor Time (all instances)                                                                   
    • Less than 60% consumed = Healthy
    • 51% - 90% consumed = Monitor or Caution
    91% - 100% consumed = Critical
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
    posting is provided "AS IS" with no warranties, and confers no rights.

  • The operation failed because of a protection agent failure. (ID 998 Details: No more data is on the tape (0x80070450))

    For the past couple of days I have been getting the following alert on my tape backups:
    Cannot verify tape data.
    The operation failed because of a protection agent failure. (ID 998 Details: No more data is on the tape (0x80070450))
    It has completed the backup but I get this error when performing a verify or when I try and restore.
    This error only occurs on the same server we backup in the protection group. The other 5 servers backup fine.
    We are using DPM 2010 (3.0.8195.0)

    Same here.
    When I came back from vacation I found the same error in our DPM 2012.
    The operation failed because of a protection agent failure. (ID 998 Details: No more data is on the tape (0x80070450))
    I cannot find anything in the eventlog saying that the tapelibrary has been offline.
    How can I check that?
    Last nights tape-job went "almost" well, one server (VM) still has this error. (But I dont know if that depends on the fact that it had status "Missing" in hyper-v manager due to a Win-update shutdown on a host that had a  misconfiguration (auto-reebot).)
    I rebooted the DPM-server this morning and then I tried to manually run all tapejobs again but they get this status again.
    I do not understand this error and why it suddenly appears to work again for a scheduled job but not when I trigger the job manually.
    Is there not a solution for this?
    /Anders

  • KM Document: edit locally - error occured "Operation Failed"

    Hi everyone!
    I am runnig SAP NetWeaver Portal 7.0 with MS Internet Explorer 7.0.
    I am trying to edit documents locally from the KM. Unfortunately it doesn´t work. Error occured "Operation Failed".
    I think all ActivX settings in the web browser are corecctly configured. I don´t think that there are problems with permissions of the document because it doesn´t work with personal documents too.
    Could the problem depend on MIME Type settings?
    What can i do to solve the problem?
    Looking forward for your helb and answers
    Dominik

    Hi Dominik,
    Open the Config tool and check if you this java parameters set for each server node:
    -Djava.io.tmpdir=
    if not, create a directory and add this parameters to each server node .
    After that, you should restart the J2ee server.
    Hope this help.
    Best regards,
    José

  • When I try to set-up iCloud, I get error message "Verification Failed"?

    When I try to set-up iCloud, I get error message "Verification Failed - The certificate for this server is invalid. You may be connecting to a server that is pretending to be "setup.icloud.com" which could put your confidential information at risk."  How do I get passed this message?

    The only messages I'm aware of are the ones that say that you can't move to iCloud right now because servers are too busy and that you can continue using MobileMe.  I'd try to go back to iClound in your Settings and give it another try.

Maybe you are looking for

  • Schedule lines are not modified when i change the requested delivery date

    Hi   i have a issue when i am created sales order with requested delivery date 10.11.2011 and the same is copied in to item schedule lines as a 10.11.2011 before saving the order i change the requested derlivery date to 11.11.2011 this new requested

  • Windows 8.1 update 521

    I remember when the 8.1 update was announced to come out in September and October for the Lumia 521 but still nothing. It's the only reason my family got 521's. Does anybody have any information when it's actually coming out?

  • Purchase ipod with iTunes gift card

    is it possible to purchase iPods or accessories with itunes gift cards? Thanks.

  • Vendor discounts

    Can someone please explain me what account should be established "Cash discount taken" or "Cash discount lost" if the vendor discounts are tracked at gross. And which account "Cash discount taken" or "Cash discount lost"  to create if the vendor disc

  • Starting a career jump...what should my expectations be?

    As the title states I'm starting to transition into an IT career and I'm just curious what should my expectations be in terms of starting positions....culture changes...(admittedly a very "30,000 ft" level question.)To help, let me give a little back