6i Reports Not Running in Windows 64 Bit PC

Hi All,
We have installed 64 bit version of Windows in some PC’s. We are running Forms and Reports 6i from that PC. But only forms are running fine reports are not running. Have any one of you encountered this problem and got that resolved.
Please share with us the resolution for the same.
Thanks in advance

Hello - I have been able to get the AIP installed.
Turns out that the installation was hanging because a previous version of Acrobat was already installed. On other machines with Acrobat, I would get a window stating that I had to remove the old software but on W7 x64, the installation simply failed. After removing the old version and trying again, the new installation succeeded.
Thanks to everyone for their help.

Similar Messages

  • Report not opening in windows 8

    hello all,
    on some machines report not opening after windows 8 installed can anyone had this issue .
    Please help..
    Dilip Patil..

    Hi Dilip,
    Based on my understanding, you want to open reports on some machines which have Windows 8 installed, right?
    Regarding the issue, we couldn’t understand it clearly, and we would like to confirm something from you below:
    1. Which method have you tried to open reports, SSDT, report manger or another application?
    2. Have you installed SSRS on the machine which have Windows 8 installed? If so, have you checked if the version of SSRS is supported on Windows 8? 
    3. On which version of SSRS you create those reports? If those reports open with a higher version of SSRS, you should refer to this
    article to upgrade the reports firstly.
    So in your scenario, please provide more information about the issue then we can understand the issue clearly.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • Unwise.exe Files not run on Windows 8.1 SSSS

    So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
    what should i do?
    Reply Please!

    So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
    what should i do?
    Reply Please!

  • Director 11.5 "exe" not running in windows lower version

    hi,
    i have some project made in director mx2004 (d10) and convert it to director 11.5 but when i publish exe it will not run on windows 2000 or windows 98 (basically lower then windows xp2), have any one idea of that
    thanks

    This page shows the authoring and runtime OS requirements. Unfortunately, D 11.5 isn't set up to run on Windows versions earlier than XP. You may want to keep that earlier version of your .exe and make it available to users with 2000 or 98.

  • I have a dual boot system. Windows xp and Windows 7. Photoshop elements 7 would not run on Windows 7, so I purchased Elements 13. Slow as christmas. Not worth using at the speed it takes to do work on photos

    I have a dual boot system, xp pro and 7 pro. Photoshop elements 7 runs fine on xp, but would not run on windows 7. Bought elements 13, Very, Very slow. To slow to work on photographs. I have bought new ram and done every other optimize ideas I have found online.
    Any ideas.  Asus anthlon 64 x 2, 4g ram, m2n e motherboard, NVidia video card, 2+ g processor

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • My office professional will not run with windows 8.1

    my office professional will not run with windows 8.1 It ran fine on 7 and 8 but not 8.1

      Microsoft Windows 8.1 officially supports all currently supported Microsoft Office versions including Office 2013 / 2010 / 2007 / 2003 , and may be even earlier versions unofficially. I use Microsoft Office Professional Plus on my Windows 8.1 and it runs fine with no issues.   Could you try what has already been suggested by others including Big_Dave and reinstall Microsoft Office with complete reboot/restart  between uninstall/new installation <restart, not shut down and start over>. If this doesn't work, please post again if installation went fine, what exactly is the error code (if any), what is the problem exactly, any screenshots ?

  • My JavaApplets does not run in WINDOWS XP

    Java Applets do not run in windows xp internet explorer. Even I have downloaded and installed the latest version of JVM from Sun site but it does not work. Please help me in getting rid of this probelm.

    do you get an error message? what happens?

  • Continuing update failure problems, "Not running real Windows"

    Hello,
    About 2 weeks ago I started getting a message on my computer screen "Not running Genuine Windows". I am most definitely running genuine windows. I checked the archives here and tried a fix that popped up, no joy.
    It gave a fix option, which failed...generating error code 800706F7 again. I called tech support, a lady spent two hours working on the computer and could not fix it. She sent me to level two tech support, he called on New Years Day and worked on it for
    a couple of hours and thought it was fixed.
    The error message is back, the computer will not accept updates from windows updates.com, tells me to install update fix it, did so, still fails to install updates. This is becoming a nightmare, please help.

    Hello NorCal Jeff,
    Please use system restore to restore the system back to a store point before two weeks ago and check if the issue still exists.
    System Restore:
    http://windows.microsoft.com/en-hk/windows7/products/features/system-restore
    1.Open System Restore by clicking the Start button. In the search box, type System Restore, and then, in the list of results, click System Restore. Administrator permission required If you're prompted for an administrator password or confirmation, type the
    password or provide confirmation.
    2.Follow the steps in the wizard to choose a restore point and restore your computer.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • I m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

    i m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • Crystal Report XI R2 version 11.5 not run on Windows Vista 64 bit OS

    We have created the Windows Vista 64 bit Development Environment with u201CCrystal Report XI R2u201D version 11.5 .  When we try to run report it gives following error
    "An error has ocured while attempting to load Crystal Reports runtime.
    Either the Crystal Report Registery key permissions are insufficient or the Crystal Reports runtime not installed correctly.
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or itanium) required. Please go to http://www.bisinessobjects.com/support for more information"
    Then we Installed Crystal Reports redistributable from u201CC:\Program Files\Microsoft Visual Studio 8\Crystal Reports\CRRedist\X64\CRRedist2005_X64.msiu201D
    and run the report we got same error.
    Its working properly on Windows XP 32 bit Development Environment.
    Please advice.
    Thanks in advance

    Couple of things to consider;
    1) CR XI r2 is not 64 bit
    2) The MSI you installed is for CR 10.2 which ships with .NET 2005, not CR XI r2.
    3) To use CR XI r2 on Vista, you must have applied at least SP 4
    For more information see the following;
    [Crystal Reports support of 64 bit Operating Systems|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e]
    [What versions of Crystal Reports are supported on Windows Vista in VS .NET?|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=64259646]
    [Crystal Reports v. 9.1 to 12.x  VS .NET Runtime Distribution  & Supported Operating Systems|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567]
    Ludek

  • Ni usrp example are not running on window 7 64 bit

    i have installed labview 2012 ,modulation toolkit, mathscript toolkit and usrp device driver 1.2. i am using window 7 64 bit operating system. i am trying to run example of usrp but it was not running it is not able to load NI-MAPro.lvlib files .any other toolkit required to be installed to run examples of ursrp ...please help  i am new to usrp and labview.

    well most example of modulation toolkit and other like  EX FM demod sound card (queue), ex fsk tx,ex pam rx , ex pam tx, psk, QAM  ....allmost all example are creating poblem..whenever i click it start loading file but it is not able load NI_MAPro.lvlib it ask for file path but i donot where these files are located.for example if i click to open FM Demod sound card (queue) example it is not able laod file NI_Mapro.lvlib:fft power spectrum for 1 chan(cdb).vi

  • BB Desktop Software 6.1 will not run on Windows 7 64-Bit

    I wrote to the forum of my problem, and a nice person here told me that I may be having the same problem as others and to repost my question to this link
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/BB-Desktop-Software-6-1-will-not-run-...
    I went there and cannot find a button to tick to post to that page, so I went one back and posted my problem in hopes of finding help. BB4matt even told me what my laptop is.  A Genuine Windows 7 home Premium 64 bit Operating System, and that Desktop 6.1 will not run on this system, to copy my problen to the above link, (which I couldn't figure out how to do) or start a new one under the heading I used, that I MIGHT attract a guru of sorts, BB Tech Advisor, ViciousFerret. MR FERRET, please help!
    Thank you all so much in advance once again! (Below is my original plea for help.)
    P  
    Hi. 
    I have read in these forums and am still lost.  I know my answer should be in hre somewhere, but if it is I am unable to understand it, so be patient as I may be reasking an already answered question.
    I try to be a good lil girl and follow forum rules, but am lost here.
    I bought a new laptop, a Dell 17R  It runs Win 7 I think. Lots of ROM/RAM.  I dowloaded the desktop program from bb dot com and cannot get it to work.  First it asked me to trouble shoot, and reconfigured the DT prog for Win XP.
    It then acknowledged my Torch and dld my photos.  Then it decided I didn't have space and undid whatever it did.
    NOW I cannot get the program, once it opens to recognise my phone at all! ACK!!
    I need someone who understands this gobbltygook to explain to me what to do.  I need to unload my photos, as I use my phone to take pix more than I would have thought.
    I am a photog, and it's better than my first digital this Torch 9800 is, and video quality, OMG, but the vids are too big to upload from the phone..........(IDK why cuz it did at Christmas?)
    Anyway, please help me here, as I can use a computer, e-mail, Facebook, Picassa, other than that, IDK too much about them.  (It took my YEARS to spring for this laptop)
    Thank you in advance for your patience.
    P  

    I have the same issue.  It gets to a desktop manager picture and just freezes.

  • ITunes 10 will not run on Windows 7, 64 bit

    I have upgraded to itunes 10 and now it will not run. In task manager the process is running but no programme. i uninstalled all itunes, quick step, bonjour and apple folders. Then tried a clean instal of itunes 10. Still didn't work. Uninstalled again and reloaded v 9.2 and it works. Tried disabling bonjour and ran the instal of 10 again and it still doesn't work. This is becoming a major pain as I am stuck on v9.2.

    Try installing the version 10 again so we can check on a few other characteristics of the problem, seeoh.
    (1) Does your QuickTime Player launch, or do you get an error message of some kind when you try to launch that?
    (2) Try (by way of experiment) disabling the BonJour Service.
    In your Start Menu, right-click Computer and select "Manage".
    Expand "Services & Applications".
    Open "Services". (Maximise the window to better see what's going on.)
    Right-click the BonJour Service and select "Properties". In the "General" tab, set Start-up type to "Disabled".
    Restart the PC, and try launching iTunes again. Does it launch this time?

  • Lightroon CC upgrade will not run on windows 8.1

    Ran Adobe Creative Cloud updates today, all updates installed and are working OK except for Lightroom, it will not run when opened, no error messages appear and windows trouble shooter reports it as lightroom is incompatible. I have done a complete manual uninstall, reinstalled and the problem still exists. Does anyone have the same problem or a possible fix

    Hi
    After installing lightroom CC you must sign out and oce again sign in from the creative cloud.
    Do this by:
    Preferences>Account>Log out from the creative Cloud.
    Let me know if it worked.

  • PSE 5 will not run in Windows 7?

    Hi,
    I recently upgraded from Windows Vista 32 bit to Windows 7 64 bit - I reinstalled PSE 5 but now it will not run.
    I get the following errors:
    - Could not load the FastCore Routines module because the file could not be found.
    - Could not load the MMXCore Routines module because the file could not be found.
    - Could not load the Multiprocessor Support module because the file could not be found.
    - Could not initialize Photoshop Elements because the file could not be found.
    - The action you have requested could not be completed because the application is not responding. It may still be loading or waiting for a response from you.
    I searched for the errors on the forums and found the common responses that the 5.0.2 update needed to be installed. I installed the update but it hasn't fixed the problem.
    I also saw that many people had managed to run it using compatibility mode - I have tried running it in Windows Vista/SP1/SP2, Windows XP etc but nothing likes it.
    Can anybody please help? I had absolutely no problems with this software before and I'm half tempted to buy PSE 10 (which I can't afford to do) just to save me the hassle.
    Thanks in advance.

    Hi Laura,
    Since you've uninstalled and re-installed PSE5, we have to assume that those files are in the correct location.  If someone here has PSE5 installed, it would be nice if they can confirm that.
    The next thing to try is disabling Data Execution Prevention (DEP) for the editor:
    Use Start...Control Panel...System.
    On the left, select "System Protection".
    Select the "Advanced" tab.
    Click the "Settings" button in the "Performance" section.
    Click on the "Data Execution Prevention" tab.
    Use the bottom radio button ("Turn on DEP...except those I select").
    Click the "Add" button, then browse to the
    "C:\Program Files (x86)\Adobe\Photoshop Elements 5\PhotoshopElementsEditor.exe"
    file.
    Make sure that the editor's file has a check in its box, and do "OK" to back out of all the dialog boxes.
    Reboot.
    Ken

Maybe you are looking for