7.5 -Admin Console - Active X control error
Hi,
When i try to open BPC admin Console, its opening a blank page with Title "BPC Active X document framer Control"
How to fix this issue? this in BPC 7.5 MS
Thanks in advance
Hi,
sometimes the admin console doesn't open right and it's remain only the shell but normally if you close and reopen than it's open correctly.
Kind regards
Roberto
Similar Messages
-
I am trying to use an Active X control from Ophir to talk to a laser power meter. The control seems to be registered properly since I can see all the methods correctly in the invoke node. The file is an .ocx file, so it's not a server.
It has been tested under Visual Basic 6.0 and Visual C++ 6.0 and "can be used in any environment that allows interaction with COM automation servers."
At first I tried running it using 'Automation Open' to get a refnum, but this kept resulting in error -2147418113 (Catastrophic error). After searching on this in the NI forum and reading about ActiveX servers vs. controls, I tried using just the Active X container (OphirUsbXLib.UsbX in this case) wired directly to the invoke node. However this results in Error 97 "Null refnum". I've tried rebooting, re-registering, etc with no luck.
Any suggestions for getting around this would be appreciated!Under the front panel controls, there is a subpallette called 'Containers'. Inside this, choose an 'ActiveX Container'. Right-click on this and chooose 'Insert ActiveX object', then browse the list to find the OphirUSB.dll
Hope this helps.
Regards,
Tom -
Just downloaded JMS (3.6) and the admin console is getting an error...
Upon running the admin console I am getting this error "java.Lang.ClassNotFoundException.javax.help.HelpBroker" for some reason I am not going to be able to get any online help at all???
what is the problem and how can I fix this?Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
Active X control Error while installing MSP .....Urgent
When I try to install MSP from Project Super User responsilbility, I get the following message:
Exception Name: oracle.apps.bne.exception.BneFatalException
Cause: Microsoft VBScript runtime error: 429 - ActiveX component can't create object
Action: Assure is installed, and check your browser's security by navigating to the Internet Explorer Tools
menu -> Internet Options -> Security tab. Make sure the correct Web content
zone is selected and press the Custom Level button. Set "Initialize and script
ActiveX controls not marked as safe" to "Prompt". Press the Return button on
this page to restart the document creation process. Select "Yes" when prompted
to accept an ActiveX control to complete the process.
I have set all the active controls rightly and also all the web ADI pathces are applied. We are on
Projects Family Pack M and Roll up Patch 3.
Still I am facing this issue.
I need to resolve it very urgently.
Pls reply very soon on this.If you are a customer and have access to Metalink there are two notes that you should look at:
NOTE 277096.1 "FAQ INTEGRATION WITH MICROSOFT PROJECTS"
NOTE 277089.1 "TROUBLESHOOTING TIPS: MICROSOFT PROJECT INTEGRATION" -
Admin Console Applet Login Connection Error
Hello,
I have done some Corba programming before and now I want to do more
serious work on Tuxedo. So I wish you will bear with my simple questions.
- I have brought up Tuxwsvr and wlisten (no errors) and listner is
running on port 3050 (windows platform)
- Now I open the web admin page and insert my login/pass (I have
controled it in the "tlisten.pw" file and its correct.
- The applet issues the error : "Connection Failed"
I appreciate if someone can help or forward me to an FAQ if this is a
frequently asked question.
Regards,
MacMac,
This error usually indicates tuxwsvr can not connect to the wlisten. So you
need to make sure wlisten started correctly.
The default port for "tlisten" is 3050, if you specify it to wlisten in the
%TUXDIR%\udataobj\webgui\webgui.ini, then wlisten can not bind to the same
port.
So I would suggest configure another port and have a try.
Regards,
Wayne
"news.bea.com" <[email protected]> wrote in message
news:[email protected]..
Hello,
I have done some Corba programming before and now I want to do more
serious work on Tuxedo. So I wish you will bear with my simple questions.
- I have brought up Tuxwsvr and wlisten (no errors) and listner is
running on port 3050 (windows platform)
w
- Now I open the web admin page and insert my login/pass (I have
controled it in the "tlisten.pw" file and its correct.
- The applet issues the error : "Connection Failed"
I appreciate if someone can help or forward me to an FAQ if this is a
frequently asked question.
Regards,
Mac -
Unable to change password from admin console getting the following error
BEA-159907
USER admin INVOKED ON Security:Name=myrealm AD METHOD getCurrentName PARAMS Users6839815711
Info: USER user INVOKED ON objectId METHOD method PARAMS params
can any one help me outHi,
Please try changing it using WLST Script: http://middlewaremagic.com/weblogic/?p=4334
or still if you are facing any issue then Reset the Admin Server Account Using: http://middlewaremagic.com/weblogic/?p=323
Or else please post the complete Stack Trace from the Server Log.
Thanks
Jay SenSharma -
Can't start manager server on other machine from admin console
hi, m fredzh
i have weblogic 10.3.2 where i created a cluster named cluster1 on production mode
the machines and servers list as follow:
cluster1 192.168.1.100
--machine1
--server1 192.168.1.100
--machine2
-server2 192.168.1.101
i create nodemanager on machine2, and set the type as ssl, the listener address 192.168.1.101,
then login on 192.168.1.101, and run wlst.sh , nmEnroll and then start startNodemanaged.sh ..
start server2 on the admin console(on 192.168.1.100), failed and the log as follow:
can anbody help me, thank you..
==============================================================================
<Critical> <WebLogicServer> <localhost.localdomain> <managerServer2> <main> <<WLS Kernel>> <> <> <1286788326928> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.reflect.InvocationTargetException
java.lang.AssertionError: java.lang.reflect.InvocationTargetException
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:175)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:991)
at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:709)
at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1098)
at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1111)
at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:602)
at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:284)
at weblogic.server.channels.ChannelService.start(ChannelService.java:250)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:173)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:991)
at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:709)
at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1098)
at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1111)
at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:602)
at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:284)
at weblogic.server.channels.ChannelService.start(ChannelService.java:250)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:125)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:173)
at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:96)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:173)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:991)
at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:709)
at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1098)
at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1111)
at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:602)
at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:284)
at weblogic.server.channels.ChannelService.start(ChannelService.java:250)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Edited by: fredzh on 2010-10-12 下午6:54hi,Jay
i followed the steps as follow:
1、change prod mode to dev
2、modified the config.xml entrys on the all two servers:
<node-manager-password-encrypted>test</node-manager-password-encrypted>
<credential-encrypted>test</credential-encrypted>
<embedded-ldap>
<name>cluster_domain</name>
<credential-encrypted>test</credential-encrypted>
</embedded-ldap>
3、enrolled the node, then started the two adminservers, started server2's nodemanager..server2 can be started from the cluster admin console.
4、change the dev mode to prod mode on admin console, it failed throw error:
"in production mode, it's not allowed to set a clear text value to the property: CredentialEncrypted of SecurityConfigurationMBean"
i checked the config.xml ,the entrys i had changed were not aotomatically encrypted,may i manually encryp the clear text value? ..follow is the config.xml :
<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator/1.0/passwordvalidator.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd">
<name>cluster_domain</name>
<domain-version>10.3.2.0</domain-version>
<security-configuration>
<name>cluster_domain</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
<sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator" xsi:type="pas:system-password-validatorType">
<sec:name>SystemPasswordValidator</sec:name>
<pas:min-password-length>8</pas:min-password-length>
<pas:min-numeric-or-special-characters>1</pas:min-numeric-or-special-characters>
</sec:password-validator>
</realm>
<default-realm>myrealm</default-realm>
<anonymous-admin-lookup-enabled>false</anonymous-admin-lookup-enabled>
<credential-encrypted>test</credential-encrypted>
<web-app-files-case-insensitive>false</web-app-files-case-insensitive>
<compatibility-connection-filters-enabled>false</compatibility-connection-filters-enabled>
<node-manager-username>weblogic</node-manager-username>
<node-manager-password-encrypted>test</node-manager-password-encrypted>
<principal-equals-case-insensitive>false</principal-equals-case-insensitive>
<principal-equals-compare-dn-and-guid>false</principal-equals-compare-dn-and-guid>
<downgrade-untrusted-principals>false</downgrade-untrusted-principals>
<enforce-strict-url-pattern>true</enforce-strict-url-pattern>
<cross-domain-security-enabled>false</cross-domain-security-enabled>
</security-configuration>
<jta>
<security-interop-mode>default</security-interop-mode>
</jta>
<server>
<name>AdminServer</name>
<ssl>
<hostname-verifier xsi:nil="true"></hostname-verifier>
<hostname-verification-ignored>true</hostname-verification-ignored>
<export-key-lifespan>500</export-key-lifespan>
<client-certificate-enforced>false</client-certificate-enforced>
<two-way-ssl-enabled>false</two-way-ssl-enabled>
<ssl-rejection-logging-enabled>true</ssl-rejection-logging-enabled>
<inbound-certificate-validation>BuiltinSSLValidationOnly</inbound-certificate-validation>
<outbound-certificate-validation>BuiltinSSLValidationOnly</outbound-certificate-validation>
<allow-unencrypted-null-cipher>false</allow-unencrypted-null-cipher>
<use-server-certs>false</use-server-certs>
</ssl>
<listen-port>7110</listen-port>
<listen-address></listen-address>
</server>
<server>
<name>server2</name>
<machine>machine2</machine>
<listen-port>7110</listen-port>
<listen-address>192.168.1.101</listen-address>
<server-start>
<java-vendor>Sun</java-vendor>
<java-home>/opt/jdk1.6.0_21</java-home>
<bea-home>/root/Oracle/Middleware</bea-home>
<root-directory>/root/Oracle/Middleware/user_projects/domains/cluster_domain</root-directory>
<username>weblogic</username>
<password-encrypted>{AES}xhSI75AxXtXdMrCXRgA2uY5pfcxUGE9X4YXTjfe1XEY=</password-encrypted>
</server-start>
</server>
<embedded-ldap>
<name>cluster_domain</name>
<credential-encrypted>test</credential-encrypted>
</embedded-ldap>
<configuration-version>10.3.2.0</configuration-version>
<machine xsi:type="unix-machineType">
<name>machine2</name>
<node-manager>
<nm-type>SSL</nm-type>
<listen-address>192.168.1.101</listen-address>
<listen-port>5556</listen-port>
<debug-enabled>false</debug-enabled>
</node-manager>
</machine>
<admin-server-name>AdminServer</admin-server-name>
</domain>
Edited by: fredzh on 2010-10-13 下午7:57 -
Unable to access Admin Console
Hi,
I have installed Oracle Database11g and WebLogic 10.3.0 Application Server successfully in LINUX-64 bit environment. At the end of OIM server 9.1.0.1 it displays "The Oracle Identity Manager Application Server setup has some problem. Refer OIM_HOME/Xellerate/logs/setup_weblogic.log for information about the problem" in the console. So, when i able to access Admin console. It throws Error:404.
Also setup_weblogic.log has the following error details
BUILD FAILED
/oracle/oimserver/xellerate/setup/setup.xml:443: The following error occurred while executing this line:
/oracle/oimserver/xellerate/setup/weblogic-setup.xml:196: Could not create task or type of type: wlst.
Ant could not find the task or a class this task relies upon.
Also nexaweb.war and xlWebApp.war is missing in Weblogic console page-> Deployment tab.
I have reinstalled the weblogic and OIM again but still getting the same problem..
Please help me to resolve this issue.
Thanks in advance.
Regards
Katheresh
Edited by: Katheresh on May 10, 2010 9:47 PMHey Kathy
did you setup ORACLE_HOME to weblogic_home, JAVA_HOME and added java to PATH. Also do you have any other ANT installed on your server.
Have you checked the OIM certification matrix for the version of various components like OIM, Weblogic and Database.
If you are sure that you did all this correctly, then perform the following:
The nexaweb classloader error is seen at times prior to performing the post installation steps. Then make a backup of the weblogic domain directory and the <OIM_HOME> directory.
1. Please continue and perform the postinstallation steps.
2. Restart the server
3. In the weblogic console, shcek to see that the xellerate and nexaweb applications have an "ok" status.
4. If not:
a. Please upload the oim server log.
b. Using the WebLogic console undeploy all oim applications including, xellerate, nexaweb and, if there, XIMDD, and SPML.
c. Delete the directory <OIM_HOME>/xellerate/webapp/precompiled
d. Delete the xellerate.ear and Nexaweb.ear from the directory <OIM_HOME>/xellerate/OIMApplications (Note: do this on all nodes of the cluster)
e. Delete the ant_backup.jar, optional_backup.jar and xercesImpl_backup.jar files from the OIM_HOME/xellerate/ant/lib directory.
f. Delete the xellerate and Nexaweb directories from the BEA_HOME/user_projects/domains/DOMAIN_NAME/servers/AdminServer/tmp/_WL_user directory.
g. Delete the xellerate and Nexaweb directories from the BEA_HOME/user_projects/domains/DOMAIN_NAME/servers/MANAGED_SERVER_NAME/tmp/_WL_user directory.
Delete the xellerate and Nexaweb directories from the BEA_HOME/user_projects/domains/DOMAIN_NAME/servers/MANAGED_SERVER_NAME/stage directory.
h. In the OIM_HOME/xellerate/setup/weblogic-setup.xml file:
i. Search for the following element:
<wldeploy action="deploy"
source="${WL_APP_LOCATION}/OIMApplications/WL${application.filename}"
name="Xellerate"
user="${weblogic_login_user}"
password="${weblogic_login_password}"
verbose="true"
adminurl="t3://${weblogic_server_target_url}:${weblogic_server_admin_port}"
debug="${action.deploy.debug}"
targets="${wl.deploy.target}" />
ii. Add a timeout value of 5400 as shown:
<wldeploy action="deploy"
source="${WL_APP_LOCATION}/OIMApplications/WL${application.filename}"
name="Xellerate"
user="${weblogic_login_user}"
password="${weblogic_login_password}"
verbose="true"
adminurl="t3://${weblogic_server_target_url}:${weblogic_server_admin_port}"
debug="${action.deploy.debug}"
targets="${wl.deploy.target}"
timeout="5400" />
i. Restart the WebLogic server and managed servers.
j.Open a terminal session and export the the JAVA_HOME and PATH environment variables.
k. In the same terminal session, change to the directory <OIM_HOME>/xellerate/setup
l. Run "patch_weblogic.sh"
This should reinstall that xellerate applications on WebLogic.
Hope this helps. -
Ssl handshake error when activating changes in admin console
An error occurred during activation of changes, please see the log for details.
[Deployer:149150]An IOException occurred while reading input.; nested exception is: javax.net.ssl.SSLKeyException: [Security:090477]Certificate chain received from 10.26.176.83 - 10.26.176.83 was not trusted causing SSL handshake failure.; nested exception is: javax.net.ssl.SSLKeyException: [Security:090477]Certificate chain received from 10.26.176.83 - 10.26.176.83 was not trusted causing SSL handshake failure.
[Security:090477]Certificate chain received from 10.26.176.83 - 10.26.176.83 was not trusted causing SSL handshake failure.
WLS 10.3 on Windows 2008: I configured one of my managed servers for SSL and I'm able to reach deployments via browser and the keystore/certificate chain I have setup. However, I'm getting the above error in Admin Console all over the place. I am unable to commit configuration changes without deleting the SSL managed server. The admin server is still HTTP via 7001. I'm not sure where to look to resolve this issue. Any ideas appreciated.It seems like you did not update the trust store of your AdminServer. It acts as a ssl client of your managed server and cannot verify its identity certificate.
-
Error when trying to access OAM 11g Admin console
I am getting an error when I try to access the OAM admin console, the page appears after I enter http://hostname:14100/oam but the login box has the following message in it:
System error. Please re-try your action. If you continue to get this error, please contact the Administrator.
I tried entering http://hostname:14100/oam_console but get a 404 error
The log file outputs the following:
[oracle@core bin]$ startManagedWebLogic.sh oam_server1
JAVA Memory arguments: -Xms256m -Xmx512m -XX:MaxPermSize=512m
WLS Start Mode=Production
CLASSPATH=/opt/oracle/product/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar::/opt/oracle/product/Middleware/Oracle_IDM1/oam/server/policy/sts-policies.jar:/opt/oracle/product/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/oracle/product/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/oracle/product/Middleware/jdk/lib/tools.jar:/opt/oracle/product/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/oracle/product/Middleware/wlserver_10.3/server/lib/weblogic.jar:/opt/oracle/product/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/opt/oracle/product/Middleware/wlserver_10.3/server/lib/webservices.jar:/opt/oracle/product/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/opt/oracle/product/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/opt/oracle/product/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/opt/oracle/product/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/opt/oracle/product/Middleware/Oracle_IDM1/oam/agent/modules/oracle.oam.wlsagent_11.1.1/oam-wlsagent.jar:/opt/oracle/product/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/opt/oracle/product/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/opt/oracle/product/Middleware/wlserver_10.3/server/lib/xqrl.jar
PATH=/opt/oracle/product/Middleware/wlserver_10.3/server/bin:/opt/oracle/product/Middleware/modules/org.apache.ant_1.7.1/bin:/opt/oracle/product/Middleware/jdk/jre/bin:/opt/oracle/product/Middleware/jdk/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/opt/Oracle/bin:/opt/oracle/product/Middleware/user_projects/domains/iam/bin:/opt/oracle/product/Middleware/OPatch:/opt/oracle/product/11.2.0/dbhome_1/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Oracle JRockit(R) (build R28.1.3-11-141760-1.6.0_24-20110301-1432-linux-x86_64, compiled mode)
Starting WLS with line:
/opt/oracle/product/Middleware/jdk/bin/java -server -Xms256m -Xmx512m -XX:MaxPermSize=512m -Dweblogic.Name=oam_server1 -Djava.security.policy=/opt/oracle/product/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -Dweblogic.security.SSL.trustedCAKeyStore=/opt/oracle/product/Middleware/wlserver_10.3/server/lib/cacerts -da -Dplatform.home=/opt/oracle/product/Middleware/wlserver_10.3 -Dwls.home=/opt/oracle/product/Middleware/wlserver_10.3/server -Dweblogic.home=/opt/oracle/product/Middleware/wlserver_10.3/server -Dcommon.components.home=/opt/oracle/product/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/opt/oracle/product/Middleware/user_projects/domains/iam -Djrockit.optfile=/opt/oracle/product/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/opt/oracle/product/Middleware/user_projects/domains/iam/config/fmwconfig/servers/oam_server1 -Doracle.domain.config.dir=/opt/oracle/product/Middleware/user_projects/domains/iam/config/fmwconfig -Digf.arisidbeans.carmlloc=/opt/oracle/product/Middleware/user_projects/domains/iam/config/fmwconfig/carml -Digf.arisidstack.home=/opt/oracle/product/Middleware/user_projects/domains/iam/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/opt/oracle/product/Middleware/user_projects/domains/iam/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/opt/oracle/product/Middleware/user_projects/domains/iam/servers/oam_server1/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/opt/oracle/product/Middleware/Oracle_IDM1/oam/agent/modules/oracle.oam.wlsagent_11.1.1,/opt/oracle/product/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/opt/oracle/product/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -DOAM_POLICY_FILE=/opt/oracle/product/Middleware/user_projects/domains/iam/config/fmwconfig/oam-policy.xml -DOAM_CONFIG_FILE=/opt/oracle/product/Middleware/user_projects/domains/iam/config/fmwconfig/oam-config.xml -DOAM_ORACLE_HOME=/opt/oracle/product/Middleware/Oracle_IDM1/oam -Doracle.security.am.SERVER_INSTNCE_NAME=oam_server1 -Does.jars.home=/opt/oracle/product/Middleware/Oracle_IDM1/oam/server/lib/oes-d8 -Does.integration.path=/opt/oracle/product/Middleware/Oracle_IDM1/oam/server/lib/oeslib/oes-integration.jar -Does.enabled=true -Djavax.xml.soap.SOAPConnectionFactory=weblogic.wsee.saaj.SOAPConnectionFactoryImpl -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Djavax.xml.soap.SOAPFactory=oracle.j2ee.ws.saaj.soap.SOAPFactoryImpl -Doracle.oaam.home=/opt/oracle/product/Middleware/Oracle_IDM1/oaam/ -Doracle.oaam.home=/opt/oracle/product/Middleware/Oracle_IDM1/oaam/ -Doracle.oaam.home=/opt/oracle/product/Middleware/Oracle_IDM1/oaam/ -Djava.awt.headless=true -Dem.oracle.home=/opt/oracle/product/Middleware/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://core.apteclabs.edu:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/opt/oracle/product/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/opt/oracle/product/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath weblogic.Server
[WARN ][jrockit] MaxPermSize=512m ignored: Not a valid option for JRockit
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
<Aug 16, 2011 9:34:29 AM EDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Aug 16, 2011 9:34:36 AM EDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Aug 16, 2011 9:34:37 AM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.1.3-11-141760-1.6.0_24-20110301-1432-linux-x86_64 from Oracle Corporation>
<Aug 16, 2011 9:34:45 AM EDT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
<Aug 16, 2011 9:34:54 AM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Aug 16, 2011 9:37:45 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Aug 16, 2011 9:37:45 AM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Aug 16, 2011 9:38:02 AM EDT> <Notice> <Log Management> <BEA-170019> <The server log file /opt/oracle/product/Middleware/user_projects/domains/iam/servers/oam_server1/logs/oam_server1.log is opened. All server side log events will be written to this file.>
Aug 16, 2011 9:38:25 AM oracle.security.am.common.nap.util.NAPLogger log
SEVERE: Failed to communicate with any of configured Access Server, ensure that it is up and running.
<Aug 16, 2011 9:38:27 AM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Aug 16, 2011 9:38:52 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Aug 16, 2011 9:38:52 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Aug 16, 2011 9:39:28 AM EDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in /opt/oracle/product/Middleware/Oracle_IDM1/oam/agent/apps/oam-wlsagent-logout.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Aug 16, 2011 9:39:46 AM EDT> <Warning> <Coherence> <BEA-000000> <2011-08-16 09:39:46.790/320.434 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=DistributedCache, member=3): Assigned 257 orphaned primary partitions>
[EL Info]: 2011-08-16 09:39:47.585--ServerSession(474132858)--EclipseLink, version: Eclipse Persistence Services - 1.1.0.r3634
[EL Info]: 2011-08-16 09:39:48.526--ServerSession(474132858)--file:/opt/oracle/product/Middleware/Oracle_IDM1/oam/server/lib/oes-d8/jps-internal.jar-JpsDBDataManager login successful
<Aug 16, 2011 9:40:01 AM EDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Aug 16, 2011 9:40:01 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Aug 16, 2011 9:40:01 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Aug 16, 2011 9:40:02 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.184.128:14100 for protocols iiop, t3, ldap, snmp, http.>
<Aug 16, 2011 9:40:02 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:20c:29ff:fe26:71ec:14100 for protocols iiop, t3, ldap, snmp, http.>
<Aug 16, 2011 9:40:02 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:14100 for protocols iiop, t3, ldap, snmp, http.>
<Aug 16, 2011 9:40:02 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 0:0:0:0:0:0:0:1:14100 for protocols iiop, t3, ldap, snmp, http.>
<Aug 16, 2011 9:40:02 AM EDT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "oam_server1" for domain "iam" running in Production Mode>
<Aug 16, 2011 9:40:04 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Aug 16, 2011 9:40:04 AM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Aug 16, 2011 9:43:32 AM EDT> <Error> <HTTP> <BEA-101017> <[ServletContext@477181353[app:oam_server module:oam path:/oam spec-version:2.5]] Root cause of ServletException.
weblogic.servlet.jsp.CompilationException: Failed to compile JSP /index.jsp
index.jsp:2:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-html-1.0" prefix="netui"%>
^----^
index.jsp:2:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-html-1.0" prefix="netui"%>
^----^
index.jsp:3:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-databinding-1.0" prefix="netui-data"%>
^----^
index.jsp:3:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-databinding-1.0" prefix="netui-data"%>
^----^
index.jsp:4:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-template-1.0" prefix="netui-template"%>
^----^
index.jsp:4:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-template-1.0" prefix="netui-template"%>
^----^
at weblogic.servlet.jsp.JavelinxJSPStub.reportCompilationErrorIfNeccessary(JavelinxJSPStub.java:226)
at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:162)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:256)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:216)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:243)
Truncated. see log file for complete stacktrace
>
<Aug 16, 2011 9:43:32 AM EDT> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'oam_server1' has triggered at Aug 16, 2011 9:43:32 AM EDT. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'WL-101020') OR (MSGID = 'WL-101017') OR (MSGID = 'WL-000802') OR (MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Aug 16, 2011 9:43:32 AM EDT SERVER = oam_server1 MESSAGE = [ServletContext@477181353[app:oam_server module:oam path:/oam spec-version:2.5]] Root cause of ServletException.
weblogic.servlet.jsp.CompilationException: Failed to compile JSP /index.jsp
index.jsp:2:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-html-1.0" prefix="netui"%>
^----^
index.jsp:2:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-html-1.0" prefix="netui"%>
^----^
index.jsp:3:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-databinding-1.0" prefix="netui-data"%>
^----^
index.jsp:3:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-databinding-1.0" prefix="netui-data"%>
^----^
index.jsp:4:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-template-1.0" prefix="netui-template"%>
^----^
index.jsp:4:4: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or that there were errors during parsing of the .tld file.
<%@taglib uri="http://beehive.apache.org/netui/tags-template-1.0" prefix="netui-template"%>
^----^
at weblogic.servlet.jsp.JavelinxJSPStub.reportCompilationErrorIfNeccessary(JavelinxJSPStub.java:226)
at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:162)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:256)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:216)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:243)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.am.agent.wls.filters.OAMServletAuthenticationFilter.doFilter(OAMServletAuthenticationFilter.java:265)
at oracle.security.am.agent.wls.filters.OAMValidationSystemFilter.doFilter(OAMValidationSystemFilter.java:133)
at oracle.security.wls.oamagent.OAMAgentWrapperFilter.doFilter(OAMAgentWrapperFilter.java:120)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101017 MACHINE = core.apteclabs.edu TXID = CONTEXTID = 11d1def534ea1be0:7f0631a0:131d2d0d910:-8000-0000000000000020 TIMESTAMP = 1313502212548
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<Aug 16, 2011 9:43:51 AM EDT> <Alert> <Diagnostics> <BEA-320016> <Creating diagnostic image in /opt/oracle/product/Middleware/user_projects/domains/iam/servers/oam_server1/adr/diag/ofm/iam/oam_server1/incident/incdir_8 with a lockout minute period of 1.>
Any ideas?Hi,
Another way to "find" the URL for the oamconsole, that I use if I'm not familiar with the configuration I'm working on is to first log into the Adminserver WL Console, then go to "Deployments".
Then, find "oamconsole" in the Deployments listed (on the right).
Click on that, then on the next page, look for the "Testing" tab. Click on the "Testing" tab, which which show the /oamconsole app.
Click on the "+" to expand the tree, and you should see a bunch of different URLs on the right, e.g., if you have OAM console deployed to managed servers, etc., there'll be different URLs for those, etc., and you can just click on the links to open up OAM Console in your browser.
Jim -
Error starting managed server through admin console
Hey,
I am trying to start the managed server through the admin console, but it gives fails and give errors in the log, below mention is the log file details:
####<2007-dec-18 kl 14:05 CET> <Error> <Security> <SESO-ODX251909> <ManagedServer_1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1197983149062> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: [Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: [Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:469)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: [Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:342)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:292)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:263)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:71)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:461)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
weblogic.security.spi.ProviderInitializationException: [Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.getInstance(DefaultCredentialMapperLDAPHelper.java:115)
at weblogic.security.providers.credentials.DefaultCredentialMapperProviderImpl.initialize(DefaultCredentialMapperProviderImpl.java:93)
at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:53)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:340)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:292)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:263)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:71)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:461)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
>
####<2007-dec-18 kl 14:05 CET> <Critical> <WebLogicServer> <SESO-ODX251909> <ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1197983149109> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:898)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1029)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
I am using weblogic server 9.2 on windows. Node manager is working fine. i have tried installing weblogic server several times but it gives the same error each time i start a managed server. Kindly help.
Regards,
AlkaCan you start a managed server from the command line?
<Alka Parveen> wrote in message news:[email protected]...
Hey,
I am trying to start the managed server through the admin console, but it
gives fails and give errors in the log, below mention is the log file
details:
####<2007-dec-18 kl 14:05 CET> <Error> <Security> <SESO-ODX251909>
<ManagedServer_1> <[ACTIVE] ExecuteThread: '0' for queue:
'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <>
<1197983149062> <BEA-090870> <The realm "myrealm" failed to be loaded:
weblogic.security.service.SecurityServiceException:
com.bea.common.engine.ServiceInitializationException:
weblogic.security.spi.ProviderInitializationException:
[Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
weblogic.security.service.SecurityServiceException:
com.bea.common.engine.ServiceInitializationException:
weblogic.security.spi.ProviderInitializationException:
[Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:469)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at
weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
com.bea.common.engine.ServiceInitializationException:
weblogic.security.spi.ProviderInitializationException:
[Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:342)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:292)
at
com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:263)
at
com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:71)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:461)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at
weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
weblogic.security.spi.ProviderInitializationException:
[Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: Server or network error (81)
at netscape.ldap.LDAPConnThread.networkError(LDAPConnThread.java:768)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:555)
at java.lang.Thread.run(Thread.java:595)
at
weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.getInstance(DefaultCredentialMapperLDAPHelper.java:115)
at
weblogic.security.providers.credentials.DefaultCredentialMapperProviderImpl.initialize(DefaultCredentialMapperProviderImpl.java:93)
at
com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:53)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:340)
at
com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:292)
at
com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:263)
at
com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:71)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:461)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at
weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
>
####<2007-dec-18 kl 14:05 CET> <Critical> <WebLogicServer> <SESO-ODX251909>
<ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1197983149109>
<BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException:
[Security:090399]Security Services Unavailable
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:898)
at
weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1029)
at
weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
I am using weblogic server 9.2 on windows. Node manager is working fine. i
have tried installing weblogic server several times but it gives the same
error each time i start a managed server. Kindly help.
Regards,
Alka -
Why cannot login to weblogic admin console . no error.
Why I cannot login to weblogic admin console. I keep getting login screen. I reset the userid and password but still cannot login
Here is what's in the log file:
Sep 26, 2010 8:55:14 PM EDT> <Warning> <HTTP> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914272> <BEA-101296> <Unable to load the default compiler class "com.sun.tools.javac.Main". Using the default javac compiler to compile JSPs.>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <WebLogicServer> <TAXWARE_TEST> <myserver> <main> <<WLS Kernel>> <> <> <1285548914319> <BEA-000365> <Server state changed to STANDBY>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <WebLogicServer> <TAXWARE_TEST> <myserver> <main> <<WLS Kernel>> <> <> <1285548914335> <BEA-000365> <Server state changed to STARTING>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <SAFService> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914351> <BEA-281003> <SAF Service has been initialized.>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <SAFService> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914351> <BEA-281002> <SAF Service has been started.>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <WseeCore> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914351> <BEA-220502> <The Wsee Service is starting>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Deployer> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914366> <BEA-149209> <Resuming.>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Diagnostics> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914413> <BEA-320000> <The Diagnostics subsystem is initializing on Server myserver.>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Store> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914413> <BEA-280008> <Opening the persistent file store "WLS_DIAGNOSTICS" for recovery: directory=C:\mydomain\servers\myserver\data\store\diagnostics requestedWritePolicy="Disabled" fileLockingEnabled=true driver="wlfileio3".>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Store> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914413> <BEA-280009> <The persistent file store "WLS_DIAGNOSTICS" (430fff8d-1448-4efe-ae57-8e17de6fd97a) has been opened: blockSize=512 actualWritePolicy="Disabled(single-handle-non-direct)" explicitIOEnforced=false records=0.>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Log Management> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914429> <BEA-170025> <Initialized Domain Logging. Domain log events will be written to C:\mydomain\servers\myserver\logs/mydomain.log.>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <Log Management> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914429> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Diagnostics> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914507> <BEA-320077> <Initialized the Diagnostic Accessor Service.>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <WebLogicServer> <TAXWARE_TEST> <myserver> <main> <<WLS Kernel>> <> <> <1285548914538> <BEA-000365> <Server state changed to ADMIN>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <WebLogicServer> <TAXWARE_TEST> <myserver> <main> <<WLS Kernel>> <> <> <1285548914569> <BEA-000365> <Server state changed to RESUMING>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Management> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914663> <BEA-141052> <The auto deployment poller has started.>
####<Sep 26, 2010 8:55:14 PM EDT> <Info> <Server> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914694> <BEA-002610> <Dynamic Listener Service initialized.>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <Server> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914694> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <Server> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914694> <BEA-002613> <Channel "Default" is now listening on 172.16.37.59:7001 for protocols iiop, t3, ldap, snmp, http.>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <WebLogicServer> <TAXWARE_TEST> <myserver> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548914694> <BEA-000331> <Started WebLogic Admin Server "myserver" for domain "mydomain" running in Development Mode>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <WebLogicServer> <TAXWARE_TEST> <myserver> <main> <<WLS Kernel>> <> <> <1285548914741> <BEA-000365> <Server state changed to RUNNING>
####<Sep 26, 2010 8:55:14 PM EDT> <Notice> <WebLogicServer> <TAXWARE_TEST> <myserver> <main> <<WLS Kernel>> <> <> <1285548914741> <BEA-000360> <Server started in RUNNING mode>
####<Sep 26, 2010 8:55:15 PM EDT> <Info> <J2EE> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548915429> <BEA-160151> <Registered library Extension-Name: bea_wls_async_response (JAR).>
####<Sep 26, 2010 8:55:15 PM EDT> <Info> <EJB> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548915569> <BEA-010008> <EJB Deploying file: mejb.jar>
####<Sep 26, 2010 8:55:16 PM EDT> <Info> <WebService> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548916085> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Sep 26, 2010 8:55:16 PM EDT> <Info> <WebService> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548916179> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Sep 26, 2010 8:55:16 PM EDT> <Info> <WebService> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548916194> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Sep 26, 2010 8:55:16 PM EDT> <Info> <WebService> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548916194> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Sep 26, 2010 8:55:16 PM EDT> <Info> <WebService> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548916210> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Sep 26, 2010 8:55:16 PM EDT> <Info> <WebService> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548916210> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Sep 26, 2010 8:55:16 PM EDT> <Info> <EJB> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548916288> <BEA-010009> <EJB Deployed EJB with JNDI name ejb.mgmt.MEJB.>
####<Sep 26, 2010 8:55:27 PM EDT> <Info> <WorkManager> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1285548927226> <BEA-002901> <Creating WorkManager "consoleWorkManager" for module "null" and application "consoleapp">
####<Sep 26, 2010 8:55:28 PM EDT> <Info> <netuix> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548928226> <BEA-423101> <[console] Initializing the NetUIx container>
####<Sep 26, 2010 8:55:28 PM EDT> <Info> <netuix> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548928523> <BEA-423120> <WEB-INF/client-classifications.xml file not found at uri [console//WEB-INF/client-classifications.xml]. Classifications functionality not enabled.>
####<Sep 26, 2010 8:55:29 PM EDT> <Info> <netuix> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548929164> <BEA-423101> <[consolehelp] Initializing the NetUIx container>
####<Sep 26, 2010 8:55:29 PM EDT> <Info> <netuix> <TAXWARE_TEST> <myserver> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1285548929195> <BEA-423120> <WEB-INF/client-classifications.xml file not found at uri [consolehelp//WEB-INF/client-classifications.xml]. Classifications functionality not enabled.>
####<Sep 26, 2010 8:56:14 PM EDT> <Info> <Health> <TAXWARE_TEST> <myserver> <weblogic.GCMonitor> <<anonymous>> <> <> <1285548974540> <BEA-310002> <86% of the total memory in the server is free>There is no error. Is there another domain on your OS? can you please put here your config.xml file and your login screen image here.
May be you use wrong console to login. -
OSB Admin console-Assertion Failed Error!
Hi Team -
After creation of DB Data source and after creation of JNDI under Deployment in OSB admin console.(DS -Test connection was succesful.JNDI creation was successful).
When we try to update DB adapter from OSB ADmin console >Deployment throws below exception,credential used is admin credential -Can anyone assist on this?
Error opening /com/bea/console/actions/app/update/Flow.jpf.
The source of this error is:
com.bea.portlet.adapter.scopedcontent.ActionLookupFailedException: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:697)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266)
at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.render(PageFlowStubImpl.java:135)
at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:292)
at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:428)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:727)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****
at weblogic.server.ServerLifeCycleRuntime.getStateRemote(ServerLifeCycleRuntime.java:734)
at weblogic.server.ServerLifeCycleRuntime.getState(ServerLifeCycleRuntime.java:581)
at weblogic.management.deploy.internal.AppRuntimeStateRuntimeMBeanImpl.isTargetShutDown(AppRuntimeStateRuntimeMBeanImpl.java:196)
at weblogic.management.deploy.internal.AppRuntimeStateRuntimeMBeanImpl.fixState(AppRuntimeStateRuntimeMBeanImpl.java:155)
at weblogic.management.deploy.internal.AppRuntimeStateRuntimeMBeanImpl.getCurrentState(AppRuntimeStateRuntimeMBeanImpl.java:109)
at sun.reflect.GeneratedMethodAccessor563.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.management.jmx.modelmbean.WLSModelMBean.invoke(WLSModelMBean.java:437)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBeanServerInterceptor.invoke(FederatedMBeanServerInterceptor.java:349)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.invoke(JMXContextInterceptor.java:268)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
at weblogic.management.mbeanservers.internal.SecurityMBeanMgmtOpsInterceptor.invoke(SecurityMBeanMgmtOpsInterceptor.java:65)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:444)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:323)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11$1.run(JMXConnectorSubjectForwarder.java:663)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11.run(JMXConnectorSubjectForwarder.java:661)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.invoke(JMXConnectorSubjectForwarder.java:654)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1427)
at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1265)
at java.security.AccessController.doPrivileged(Native Method)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367)
at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:788)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:222)
at javax.management.remote.rmi.RMIConnectionImpl_1033_WLStub.invoke(Unknown Source)
at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:993)
at weblogic.management.jmx.MBeanServerInvocationHandler.doInvoke(MBeanServerInvocationHandler.java:544)
at weblogic.management.jmx.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:380)
at $Proxy154.getCurrentState(Unknown Source)
at com.bea.console.utils.DeploymentUtils.isDeploymentActive(DeploymentUtils.java:2116)
at com.bea.console.actions.app.update.Flow.begin(Flow.java:165)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:64)
at org.apache.beehive.netui.pageflow.interceptor.action.ActionInterceptor.wrapAction(ActionInterceptor.java:184)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.invoke(ActionInterceptors.java:50)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:58)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:87)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:261)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
... 55 more
Caused by: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
at weblogic.server.RemoteLifeCycleOperationsImpl_1033_WLStub.getState(Unknown Source)
at weblogic.server.ServerLifeCycleRuntime.getStateRemote(ServerLifeCycleRuntime.java:722)
... 130 more
Caused by: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:835)
at weblogic.security.service.SecurityServiceManager.getSealedSubjectFromWire(SecurityServiceManager.java:524)
at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:351)
at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:875)
at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:310)
at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:944)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:1139)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:1021)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:240)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:882)
at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:456)
at weblogic.rjvm.t3.MuxableSocketT3.dispatch(MuxableSocketT3.java:323)
at weblogic.socket.BaseAbstractMuxableSocket.dispatch(BaseAbstractMuxableSocket.java:298)
at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:901)
at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:840)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:130)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)Hi Anitha,
I am facing the same issue.
Have you found the solution to this problem?
Please respond.
Thanks
KK -
Edit of Foreign JMS module in admin console causes redeployment error
A JMS module (-jms.xml) for a foreign JMSServer specifies the url of the real JMS server. I am trying to use a deployment plan to make this url a deployment property.
Following the instructions in "Configuring and Managing Weblogic JMS" and "Deploying Applications to Weblogic Server", I have deployed the module with a fixed URL, and then attempt to edit the url in the admin console. The admin console correctly creates a deployment plan to hold modified value, but then can't redeploy the module due to errors during deployment.
I experience these errors with the module deployed stand-alone, or when bundled with my enterprise application. I also get the same error if I produce the deployment plan using the PlanGenerator.
The error seems to be a bug in the deployment plan machinery, since the xpath it produces for the variable-application does not match the xml schema for <weblogic-jms>. The plan.xml refers to "/weblogic-jms/foreign-server[name="IQN_OLTP_FOREIGN_JMS_Server"]/connectionurl" while the schema defines "/weblogic-jms/foreign-server/connection-url".
Any advice would be welcome.
We are running 9.2 SP3.
The messages in the admin console logs are:
####<Jan 22, 2009 12:07:02 PM MST> <Info> <J2EE> <truman> <IQN_ADMIN_SERVER> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (
self-tuning)'> <system> <> <> <1232651222010> <BEA-160166> <References were found in deployment plan for module 'IQN_JMS_OLTP_FOREIGN-jms.xml'
with uri, '.'. The plan was merged.>
####<Jan 22, 2009 12:07:02 PM MST> <Error> <J2EE> <truman> <IQN_ADMIN_SERVER> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default
(self-tuning)'> <system> <> <> <1232651222024> <BEA-160197> <Unable to load descriptor weblogic.deploy.api.spi.config.DescriptorParser$1@1c7654
8 finder: weblogic.utils.classloaders.CodeGenClassFinder@1ca6109 annotation: /. of module IQN_JMS_OLTP_FOREIGN-jms.xml. The error is weblogic.d
escriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
problem: cvc-complex-type.2.4a: Expected elements 'jndi-properties-credential-encrypted@http://www.bea.com/ns/weblogic/90 jndi-property@http:
//www.bea.com/ns/weblogic/90' instead of 'default-targeting-enabled@http://www.bea.com/ns/weblogic/90' here in element foreign-server@http://ww
w.bea.com/ns/weblogic/90:<null>
problem: cvc-complex-type.2.4a: Expected elements 'jndi-properties-credential-encrypted@http://www.bea.com/ns/weblogic/90 jndi-property@http:
//www.bea.com/ns/weblogic/90' instead of 'foreign-destination@http://www.bea.com/ns/weblogic/90' here in element foreign-server@http://www.bea.
com/ns/weblogic/90:<null>
problem: cvc-complex-type.2.4a: Expected elements 'jndi-properties-credential-encrypted@http://www.bea.com/ns/weblogic/90 jndi-property@http:
//www.bea.com/ns/weblogic/90' instead of 'foreign-destination@http://www.bea.com/ns/weblogic/90' here in element foreign-server@http://www.bea.
com/ns/weblogic/90:<null>
problem: cvc-complex-type.2.4a: Expected elements 'jndi-properties-credential-encrypted@http://www.bea.com/ns/weblogic/90 jndi-property@http:
//www.bea.com/ns/weblogic/90' instead of 'foreign-connection-factory@http://www.bea.com/ns/weblogic/90' here in element foreign-server@http://w
ww.bea.com/ns/weblogic/90:<null>
problem: cvc-complex-type.2.4a: Expected elements 'jndi-properties-credential-encrypted@http://www.bea.com/ns/weblogic/90 jndi-property@http:
//www.bea.com/ns/weblogic/90' instead of 'foreign-connection-factory@http://www.bea.com/ns/weblogic/90' here in element foreign-server@http://w
ww.bea.com/ns/weblogic/90:<null>
/home/jbullock/development/patch841/domains/IQN/nullplan.xml:0: problem: cvc-complex-type.2.4a: Expected elements 'jndi-properties-credential
-encrypted@http://www.bea.com/ns/weblogic/90 jndi-property@http://www.bea.com/ns/weblogic/90' instead of 'connectionurl@http://www.bea.com/ns/w
eblogic/90' here in element foreign-server@http://www.bea.com/ns/weblogic/90:<nullplan.xml>I also tried this, without success. Changing the deployment plan to use the element name "connection-url" leads to a different error during deployment:
<Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, IQN_JMS_OLTP_FOREIGN [archive: ../../package/jms/IQN_JMS_OLTP_FOREIGN-jms.xml], to IQN_BATCH IQN_OLTP1 .>
plan xpath defines an element [connection-url] that is not valid!(There is also a subtle variation in the xpath used in the deployment plan: It isn't clear whether the deployer expects /weblogic-jms/foreign-server/[name="IQN_OLTP_FOREIGN_JMS_Server"]/connection-url or /weblogic-jms/foreign-server[name="IQN_OLTP_FOREIGN_JMS_Server"]/connectionurl. The former, although not really correct XPath syntax, seems to be required for other elements, but in this case, the PlanGenerator emits latter, which is correct XPath, but has the wrong element name.)
Edited by: John Bullock on Jan 26, 2009 11:59 AM -
BizTalk admin console error Provider load failure
Hi,
I am facing issue with BizTalk admin console, getting below error,
i thought it will be due to sql server or WMI so restarted sql services as well WMIS services but no luck. restarted Distributed transaction services as well as restarted machine but it did not solve.
TITLE: BizTalk Server Administration
Failed to load Group [AMTROWBT13DV04\AMTROWBT13DEV:BizTalkMgmtDb] data providers. (Microsoft.BizTalk.Administration.SnapIn)
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013+R2&ProdVer=3.11.158.0&EvtSrc=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors&EvtID=FailedLoadingGroupProviders&EvtChain=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors+%2cFailedLoadingGroupProviders
ADDITIONAL INFORMATION:
Failed to load Group [AMTROWBT13DV04\AMTROWBT13DEV:BizTalkMgmtDb] data providers. (Microsoft.BizTalk.Administration.SnapIn)
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013+R2&ProdVer=3.11.158.0&EvtSrc=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors&EvtID=FailedLoadingGroupProviders
Provider load failure (System.Management)
after looking at event viewer i can see few more error messages,
Faulting application name: mmc.exe, version: 6.3.9600.16384, time stamp: 0x52158765
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17055, time stamp: 0x532943a3
Exception code: 0xe0434352
Fault offset: 0x00011d4d
Faulting process id: 0x215c
Faulting application start time: 0x01d004a6e0c31506
Faulting application path: C:\windows\SysWOW64\mmc.exe
Faulting module path: C:\windows\SYSTEM32\KERNELBASE.dll
Report Id: 3d994be7-709f-11e4-80ee-00505689506c
Faulting package full name:
Faulting package-relative application ID:
Application: mmc.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.OnThreadException(System.Object, System.Threading.ThreadExceptionEventArgs)
at System.Windows.Forms.Application+ThreadContext.OnThreadException(System.Exception)
at System.Windows.Forms.Control.WndProcException(System.Exception)
at System.Windows.Forms.Control+ControlNativeWindow.OnThreadException(System.Exception)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.IntDestroyWindow(System.Runtime.InteropServices.HandleRef)
at System.Windows.Forms.UnsafeNativeMethods.DestroyWindow(System.Runtime.InteropServices.HandleRef)
at System.Windows.Forms.NativeWindow.DestroyHandle()
at System.Windows.Forms.Control.DestroyHandle()
at System.Windows.Forms.Control.Dispose(Boolean)
at Microsoft.BizTalk.Administration.SnapIn.Forms.GroupHub.OperationsCtrl.Dispose(Boolean)
at System.ComponentModel.Component.Dispose()
at Microsoft.ManagementConsole.FormView.InternalShutdown()
at Microsoft.ManagementConsole.View.HandleShutdownRequest(Microsoft.ManagementConsole.Internal.IRequestStatus)
at Microsoft.ManagementConsole.View.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest(Microsoft.ManagementConsole.Internal.IMessageClient, Microsoft.ManagementConsole.Internal.RequestInfo)
at Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest()
at Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer(Microsoft.ManagementConsole.Executive.SimpleOperationCallback)
at System.RuntimeMethodHandle.InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(System.Object, System.Object[], System.Object[])
at System.Reflection.RuntimeMethodInfo.UnsafeInvoke(System.Object, System.Reflection.BindingFlags, System.Reflection.Binder, System.Object[], System.Globalization.CultureInfo)
at System.Delegate.DynamicInvokeImpl(System.Object[])
at Microsoft.ManagementConsole.Executive.DelegateMessage.OnExecute()
at Microsoft.ManagementConsole.Executive.Message.Execute()
at Microsoft.ManagementConsole.Executive.SnapInThread.DispatchPendingSnapInMessages()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnDataReadyAsync(System.Object, System.EventArgs)
at Microsoft.ManagementConsole.Executive.MmcThreadMessageWindow.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application.Run()
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnThreadStart()
at System.Threading.ThreadHelper.ThreadStart_Context(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
does any one face similar issue if yes can you please help me to solve this?
Regards,
Amit
Regards, Amit Morehere is log generated during configuration,
[2014-11-24 05:16:10:0572 Info Configuration Framework]Configuring feature: WMI
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CBtsCfg::ConfigureFeature
[2014-11-24 05:16:10:0588 Info BtsCfg] Configuring feature: WMI
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer
[2014-11-24 05:16:10:0588 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CWMI::Connect
[2014-11-24 05:16:10:0588 Info BtsCfg] Leaving function: CWMI::Connect
[2014-11-24 05:16:10:0603 Info BtsCfg] Entering function: CWMI::CreateGroup
[2014-11-24 05:16:10:0791 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(438): FAILED hr = 80041013
[2014-11-24 05:16:10:0791 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0791 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btscfg.cpp(1801): FAILED hr = 80041013
[2014-11-24 05:16:10:0791 Info BtsCfg] Entering function: CBtsCfg::UnConfigureFeature
[2014-11-24 05:16:10:0791 Info BtsCfg] Unconfiguring feature: WMI
[2014-11-24 05:16:10:0791 Warning BtsCfg] BTS management server or DB names are not found in the registry.
[2014-11-24 05:16:10:0791 Info BtsCfg] Entering function: CWMI::StopHostInstance
[2014-11-24 05:16:10:0807 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1553): FAILED hr = 80041013
[2014-11-24 05:16:10:0807 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0807 Info BtsCfg] Entering function: CWMI::UnMapHost
[2014-11-24 05:16:10:0807 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1698): FAILED hr = 80041013
[2014-11-24 05:16:10:0807 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0807 Info BtsCfg] Instantiating IBTSMsgBoxPerformance object
[2014-11-24 05:16:10:0869 Info BtsCfg] Calling IBTSMsgBoxPerformance::UninstallArtifacts
Exception in CounterManager.UninstallArtifacts when uninstalling the perf counter instances. The exception details are:
Source of exception: System
Message: Cannot delete Performance Category because this category is not registered or is a system category.
Stack trace: at System.Diagnostics.PerformanceCounterCategory.Delete(String categoryName)
at Microsoft.BizTalk.MsgBoxPerfCounters.MgmtDbAccessEntity.UninstallInstances(Boolean regularUninstall)
at Microsoft.BizTalk.MsgBoxPerfCounters.CounterManager.UninstallArtifacts(Boolean regularUninstall, String logFileName)
[2014-11-24 05:16:11:0166 Info BtsCfg] Stopping Tracing
[2014-11-24 05:16:11:0166 Info BtsCfg] Entering function: CWMI::DeleteServer
[2014-11-24 05:16:11:0182 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1353): FAILED hr = 80041013
[2014-11-24 05:16:11:0197 Error BtsCfg] Provider load failure
[2014-11-24 05:16:11:0197 Info BtsCfg] Entering function: CWMI::UnConfigureGroup
[2014-11-24 05:16:11:0197 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1076): FAILED hr = 80041013
[2014-11-24 05:16:11:0197 Error BtsCfg] Provider load failure
[2014-11-24 05:16:11:0197 Info BtsCfg] Leaving function: CBtsCfg::UnConfigureFeature
[2014-11-24 05:16:11:0197 Info BtsCfg] Leaving function: CBtsCfg::ConfigureFeature
[2014-11-24 05:16:11:0213 Warning Configuration Framework]Feature failed to configure: WMI.
[2014-11-24 05:16:11:0400 Info Configuration Framework]Configuration Summaries:
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [Group] Failed to configure with error message [Provider load failure
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BizTalk Runtime] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BAM Tools] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BAM Portal] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: SSOServer,Engine Configuration Enabled: yes
Sub UI: no Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: SSOServer,Engine Configuration Enabled: no
Sub UI: yes Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: WMI Configuration Enabled: yes
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: Engine,BTSCfg Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: RulesEngine Configuration Enabled: yes
Sub UI: no Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: MOT Configuration Enabled: yes
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMTools Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMTools Configuration Enabled: no
Sub UI: yes Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMPortal Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: MsEDIAS2 Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]Leaving function ConfigureFeatures().
[2014-11-24 05:16:11:0416 Info Configuration Framework]Entering function WizardStep_NextStepChanged.
[2014-11-24 05:16:11:0416 Info Configuration Framework]Entering function ConfigWizardResult_Load.
[2014-11-24 05:16:11:0447 Info Configuration Framework]Leaving function ConfigWizardResult_Load.
[2014-11-24 05:16:11:0478 Info Configuration Framework]Leaving function WizardStep_NextStepChanged.
[2014-11-24 05:16:14:0416 Info Configuration Framework]Displaying information notification to user. Message: <Exception Message="Provider load failure
" Source="" HelpID="" />
Regards, Amit More
Maybe you are looking for
-
User exit/BADI for changing the exchage rate type in MIGO
Dear guru's, Please help me in finding the user exit/BADI to change the exchange rate type in MIGO. Regards, Abdul Rahim
-
When I am restoring backup data for my iPhone 4 in the end of back up restore it show error message " back up can't be restored" , please advice what I can do to restore my backup
-
How to know which BAPi is being used for creation of PO in classic scenario
Hello Experts, We are in SRM 7.0 classic scenario. How can we know which BAPI is being used in the calssic scenario i.e. How can we know if we are usind BAPI_PO_CREATE or BAPI_PO_CREATE1 for creation of PO? Any pointers will be highly appreciated. Th
-
Scripting Functoid for Date Formatting in Maps Biztalk 2010
In the Source Schema I have the Date in xs: date Time Datatype in the Destination Schema I have date in String datatype. When I map directly I get the output as "2013-10-21T00:00:00". But I want it "2013-10-21" in output. I tried using the scripting
-
I needed songs off my iPod, looked on here for answers, tried some sugestions, allways had problems...CRC and "parameters.." errors were the biggest, then found that when opening the "Safely Remove Harware" icon in the system tray, then click "Proper