7515 Photosmart all-in-one goes offline every time it goes into powersave mode

I bought the Costco Photosmart all-in-one 7515 and it worked fine for a long time. For the last several months, every time it goes into power save mode, it goes offline and will not wake back up until you go into the wireless settings and even then, it has to be disconnected and reconnected in order to come back online. I haved checked for updates and downloaded the printer test app and it still goes offline when it goes into power save mode. Is there any way to disable the power save mode. When it goes offline, you can still ping it, so I am at a loss.

Hello @earldoe , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing connectivity issues.  I would like to help.
I would recommend that you turn off UPnP, and set the router channel width to 20mhz. 
For more information, I have included an article below:
10 Wireless Router Features.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

  • My HP 4215 All-in-one reinstalls itself every time I turn on my computer.

    When I turn on my computer, my HP 4215 All-In-One re-installs itself.  It doesn't do it when starting the computer from hibernate mode.  My computer is an e-Machine notebook, system is Windows XP.  This re-installation has been occurring  since I installed a tax prep program, TaxCut,  last year.  I have uninstalled the tax software.  Also, I have uninstalled the HP4215 and re-installed it.  Still have same problem.  Is this a printer problem or a Windows XP problem?  Thanks so much for your help.
    This question was solved.
    View Solution.

    WOW!  I had tried to uninstall my HP C4795 Printer and the progam somehow got corrupted.
    SO, I took the installation disk and tried to re-install the drivers, and it never gave me that option.
    I therefore had no other choice but to MANUALLY DELETE the files and folders AND, this took a couple of hours, being CAREFUL to DELETE ANY/ALL registry entries under HP.  I have a DVD BURNER that is HP, so I had to be extra careful about this.
    Upon completion, I could then re-install my printer drivers all over again.
    The first re-install was an error because I didn't unplug the USB cable...duh.
    SO, I had to uninstall again.
    The second time I re-installed the printer drivers and software, for some strange reason I had been
    getting the SAME PROBLEM as in the SUBJECT ABOVE.
    I followed your instructions AFTER it had to locate the drivers again.
    While leaving the printer ON, I then proceeded with your remedy...
    Follow these steps and see if it resolves the issue:
    1. Click on the start menu and click on 'Run', and then type 'services.msc' and press the Enter button.
    2. In the Services window, look for HP CUE Device Discovery Service, and double click on it.
    3. You should see a button labelled 'STOP'. click on that button.
    4. Above this, you should find something which says 'Startup Type'. Change that to 'Disabled'
    5. Click on the 'Apply' button and close all windows.
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    AND IT WORKED!!!!!
    THANK YOU HP!!!!
    Ray
    P.S. I will KEEP this information for future reference, AND use it to help others out too!

  • Mail goes offline every time I"m changing to 25 or 26

    Hello, I'm having a problem with my POP mail. The configuration is correct because is working on port 995 with SSL. But when I'm chenging the port to 25 or 26 the account goes offline and I dont know why. I tried from my mobile if the problem is on the server put is working fine with the port 26.
    Any suggestions?
    I'm using Lion 10.7.2
    Thanks
    George

    I use MyEclipse and Tomcat and changes are reflected within a few seconds after making changes without redeploying.
    I have noticed that when adding servlets and modifying servlets, it takes a few seconds for changes to show while the context reloads.

  • HP LaserJet 600 M602 printer goes offline every night

    Hi,
    I have a HP LaserJet 600 M602 CE991A printer on a wired network. I have quite a few other printers on the network as well and do not show me this kind of behavior.
    But for some reason, this printer, from as soon as I bought it, goes offline every time from around 5.20-5.30pm to around 8.30pm. I have a ping tester running as I am trying to figure out what's going on and I got 100% drop every night for that time period.
    I looked to see if there was a setting that puts this device to sleep or so but no, I cant find anything. I have tried with the energy setting sleep mode on or off, wake up events to trigger a wake up call to the printer but no luck.
    Firmware Bundle Version3.2.5
    Firmware Revision2302908_435019
    Firmware Date Code20140529
    I am out of options, in our other locations, we have sam printer but a CE993A models and they do not show this kind of behavior at all.
    I am at a deadlock here.

    Hi @Halan ,
    I see by your post that you aren't able to print when the laptop isn't in the same area as the printer. I would like to help you out today.
    What is the distance of the printer and the Laptop when the printer goes offline?
    Try these steps to see if it will resolve the issue.
    'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP PHOTOSMART ALL-IN-ONE 5510 WONT PRINT AFTER GOING TO SLEEP MODE

    My printer model:
    HP PHOTOSMART ALL-IN-ONE 5510 B111A
    Problem:
    Printer goes to sleep mode. After 25-30 minutes the wireless connection between the PC and the printer breaks. Blue Wireless light is on even at the sleep mode and I can see that the printer is connected to my router and there is internet connection. HP Print and Scan Doctor sees the printer but I cannot awake the printer unless I restart it. 
    What I have tried so far:
    I have tried all the solutions hp.com offered including; reinstalling driver, updating printer software, setting static IP to printer, setting static DNS servers, using HP Print and Scan Doctor.
    I have seen people asked about this question before and there was no solution. I really need HP help!
    This question was solved.
    View Solution.

    Let’s try this.  Verify in the printer that 'Auto Off' is disabled.  Set a static IP in the printer outside the DHCP range of the router.  Use a fixed wireless channel like 1,6 or 11, never 'auto', try channel 1 first then the rest.  Set router to 20Mhz only, or 145Mbps depending on router.  Always use WPA2-AES encryption.  Power off both.  Power on router wait 3 mins.  Power on printer and verify it reconnects to router.  Now try.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • C3180 Photosmart All-in-one won't print. Gives message 'clear paper jam.' There is no paper jam.

    C3180 Photosmart All-in-one won't print. Gives message  'clear paper jam.'  There is no paper jam.  About a month ago there was a paper jam, but was removed.  It worked fine since then until yesterday.  I've tried all the HP trouble-shooting suggestions- unplug, take apart, manually move carriage, etc. and nothing has solved the problem.  The paper does not advance...all that happens if I try to print is a lot of noise like carriage going back and forth and after a/b 1-2 minutes it will show the "red X" blinking on the printer and a message on the computer screen, "Clear paper jam."  When the problem first started yesterday the message was that the printer was "Out of paper."  I need to print a resume and this is just the wrong time for someone such as myself with little computer knowledge to try to figure it out.  Thanks for any suggestions!

    Hi there pattimessick,
    You may not need to remove/re-add. Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own (especially connectivity problems) and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Your recommenda​tion for a new HP Photosmart All-in-one​.

    Could I get your recommendations for a new HP Photosmart All-in-one.  My old Photosmart #C5180 died. I loved that machine - it made excellent copies, was a wonderful printer and scanner and made excellent photographs, and it lived for many years.  What would be your recommendations for a new Photosmart that would be similar to my old one and hopefully use the same cartridges,  HP02, which I have a supply of.  Thanks for your any recommendations that anyone would volunteer.

    Railway,
    Unfortunately no current model of printer is going to support those cartridges.
    Here is a link to our current photosmart models:
    http://shopping.hp.com/en_US/home-office/-/product​s/Printers/HP%20Photosmart
    All of those are great printers. If you are looking to occasionaly send faxes, then the 7510 would be the one you would want to go with. It has eFax on it, which is faxing over a internet connection, without the use of a phone line. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How can I print to hp photosmart all in one 7280 from ipad

    How can I print to hp photosmart all in one 7280 from ipad
    This question was solved.
    View Solution.

    Hi,
    Although the C7280 is not AirPrint enabled, you may still print through the local network using the HP ePrint mobile app.
    you may find the steps to get and use the app in the following document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Ink System Failed error on Photosmart All in One C7180

    I have a Photosmart All in One C7180.  I am getting the Ink System has failed....Error: 0xc05d0281 message.  I have tried all of the suggested solutions to make this go away but it seems to be a hardware failure.  Is this something that can be fixed/replaced or is the printer history?  I don't want to pay for an HP service call if this is not something that can be fixed/replaced.  Thank you for any help

    Hello there! Welcome to the forums @cleardaypdx,
    I read your post about the scanning troubles you're facing with your moms Photosmart C309a and wanted to share my suggestion with you.
    Click here to see the guide and follow the steps: 'Another program has control of the scanner' Message Displays on the Computer When Scanning
    I hope that helps, have a terrific day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HT1338 I have updated my new MacBook Pro for HP Photosmart All-in-One, but it still will not scan - it will print, but will not scan. How can I fix this?

    I have installed the updates for my HP Photosmart All-in-One c309a.  It prints, but will not scan.  Tells me to update - I did that, but still won't scan.  Any suggestions to make the scanner work?
    This all worked perfectly with my old 2008 MacBook Pro.

    Have you tried scanning from Image Capture or Preview?
    A current driver is shown to be available for Mavericks (auto-downloaded):
    http://support.apple.com/kb/ht3669#HP
    But many people have found that manufacturer scanning control software doesn't work. They have to use the Apple-provided software.

  • Can my hp photosmart all-in-one 7200 printer connect to ipad 2 via bluetooth?

    I have a hp photosmart all-in-one 7200 printer with a hp blue tooth dongle.  It works well with my cameras, but I cannot get my ipad 2 to recognize the printer.

    Hi,
    Printing via Bluetooth from an iPad is not possible due to iOS limitations, as Apple did not include the Bluetooth printing protocol in the iOS.
    If your printer is HP Photosmart C7200, you may use the HP ePrint Home & Biz App to print from your iPad through your home network
    However for the Officejet 7200 your only option is to look for any available 3rd party printing solution from the App Store.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Can HP Photosmart All-in-One C6180 be made to recognize iPad 2 AirPrint so it can print to HP?

    Can HP Photosmart All-in-One C6180 be made to recognize iPad 2 AirPrint so it can print to HP?

    Hi,
    I can' see it in this list (updated last week). Please check it yourself again.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Blue screen error c824C1500 on HP Photosmart All-in-one series C5580

    A blue screen error c824C1500 appears on my HP Photosmart All-in-one series C5580's display when I turn it on. I have gone through the basic troubleshooting solution and it give me the same error message when I plug the power cord back in. Any other solutions? Thank you.

    You probably need a new printhead or pump.  Either is financially prohibitive vs. a new printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • After upgrading to mavericks how can I connect my HP PSC 2510 photosmart all-in-one printer to my mac?

    After I upgraded my macbook air to mavericks, my HP PSC 2510 photosmart all-in-one printer doesn't connect to my macbook air.  When I try to launch the all-in-one installer from the HP CD that came with the printer, I get a message saying it cannot open because powerPC is not supported.  The HP site has not been helpful in resolving this issue.  My understanding is I first must connect the printer to the wireless system (I use airport extreme) before using airplay for printer software upgrade.

    Your suggestion is helpful, but after some digging on the HP site I found a detailed solution to my problem.  The link is: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01749025&tmp_task=setupCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=303770

  • Poor photo quality in Photosmart All-in-one B209a

    Hello All,
    I purchased a HP Photosmart 8150 printer back in 2005 for the sole purpose of making prints. Recently the thing crapped out to the extent that the repair would cost more than the printer did. It was recommended that we purchase a new printer. We bought the HP Photosmart All-in-one B209a. Most of its use will be printing photo too. 
    The main issue I am having is in the noticeably poor quality in the prints compared to the 8150. I was shocked since it is advertised as a good photo printer, but I can't believe that in 5 years this the quality has gone down? Can anyone confirm that this is the case: Is it just that the previous 8150 model was a better printer for photos or is there something wrong with the B209a. The quality in the shadows is especially disturbing and true black is never achieved, rather a very grainy shade of grey comes up. I have gone through the Print - Quality Toubleshooting guide online here, but the problem persists.
    Any recommendations? 
    -Ronan

    Hi
    i have just bought the same printer and when i printed some photos using the paper supplied the pictures actualy seemed dark. I am not happy with this as you would expect the print quality to improve. does anybody know why the print quality is not as advertised?
    Thanks
    ronesyzf wrote:
    Hello All,
    I purchased a HP Photosmart 8150 printer back in 2005 for the sole purpose of making prints. Recently the thing crapped out to the extent that the repair would cost more than the printer did. It was recommended that we purchase a new printer. We bought the HP Photosmart All-in-one B209a. Most of its use will be printing photo too. 
    The main issue I am having is in the noticeably poor quality in the prints compared to the 8150. I was shocked since it is advertised as a good photo printer, but I can't believe that in 5 years this the quality has gone down? Can anyone confirm that this is the case: Is it just that the previous 8150 model was a better printer for photos or is there something wrong with the B209a. The quality in the shadows is especially disturbing and true black is never achieved, rather a very grainy shade of grey comes up. I have gone through the Print - Quality Toubleshooting guide online here, but the problem persists.
    Any recommendations? 
    -Ronan

Maybe you are looking for

  • HTML5 Audeo Player Widget

    I use iWeb 09 for a personal webzine. I have used a simple flash audio player on the site. The ipod and iPad is closed to flash. The audio files I play are brief, somewhat as long as a sample of a song on iTunes. The iTunes app on ipad and ipod has a

  • How to implement this in SQL?

    Assure that there is table t1 with the following fields and values: Field1 field2 Field3 A         B          10 A        C      20 And there is another table t2 with the following fields and values Field2 B C D How to write a query to join the two t

  • XPRIMARY Field in TCURC Table Not being updated?

    Hello, I am trying to update the XPRIMARY field in table TCURC. The process is followed in Transfer Global Settings --> Currencies. I also tried using Transfer Exchange rates from the context menu on the corresponding source system. We have BI 7.0 in

  • SD flow In BW

    hai This is Raghu can any body send SD Flow in functional how it will works we can understood the flow of datasources.... with regards [email protected] null

  • EDI TO IDOC Conversion

    Hi, I need to convert EDI 850 data into IDOC PO data at the same time, it has to be generate 997 automatically using seeburger. Can anyone help me on this issue. with the steps. I found some scenarios in Forums but those are not giving clear idea. Pl