8.8 Client cannot connect to Windows Server 2008 error -1102

SAP Business On 8.8 on PL 18
This is not the first time I have had this issue with Windows Server 2008.
however everytime the resolution was diffrent. Now this site is causing trouble.
The issue is the client cannot connect. We have the log on window, can see the company list. type on the password and we get a -1102 error.
The client on the Server itself can log on. It is the cleints that cannot.
I checked these below.
1 SQL Native client is installed and ok.
2. Licence server is configured and ok
3. The user has admin access to locl PC
4. The SAP user name and password are correct ( client on server can connect fine )
5. The ports 1433, 30000 and 30001 are open on the server.
6. Through SQL server configuration the named pipes and TCP are enabled.
7. SQL server browser is running
The only things I have not tried are
The Firewall is running on the server and I have not yet stopped it. Will try that tomorrow.
Do you have any other ideas please ?

I have got this working but I am not confidant of the outcome - yet - I really need your expert advise here.
This is what I did. In that order.
1.     As Owen suggested I checked if there was a specified Port for the instance. What I found was TCP Dynamic ports were enabled ( SQL server config manager | network configuration | tcp properties ) and there was no TCP port specified. Assuming ( ai may be wrong) that the system assigns a dynamic port to this instance I set it up so the Dynamic port does not happen and manually specified the Port 1433. Restarted the SQL Service. ( still having the Port 1433 open in the firewall). This did not solve the issue.
2.     With the above setting still on, switched off the firewall. Went to the PC client and SAP can log on now. Now keeping the SAP client running, switched on the Firewall on the server. Log off SAP on PC client and log back in ( with firewall off ). SAP now can log on.
3.     I had to do the above step for all PCs to get them working.
4. Currently the firewall is on and clients can connect
So what could be happening? I have no clue. It is apparent there is some setting that gets saved within the PCs ( may be user profile) after the first log on with the Firewall off - to say its safe ?
However I have no idea what will happen if the server is restarted u2013 this server we cannot restart any time we want as itu2019s a critical server and runs other things.
I would still like to get to the bottom of this to understand what is happening.
I have a SAP message running too and will ask them this same question.

Similar Messages

Macbook clients cannot connect to Windows Server 2008 RRAS with L2TP/IPSec

Hi everyone,
I had installed "Remote and Routing Access" or a VPN server on Windows Server 2008. The connection type set up is L2TP/IPSec. All the Windows clients can connect to the L2TP/IPSec VPN server without problem but Macbook users are facing problem.
The Macbook users got the error message "The L2TP-VPN server did not respond. Try reconnecting. If the problem continues, verify your settings and contact your Administrator."
I think it is something related to the pre-shared key encryption but I am not sure. The Macbook users could connect if the connection type is changed to PPTP on server and clients side. I searched for similar problems and solutions online but no luck, I couldn't find solution that helps. I found this is a common problem faced by many macbook users.
Does anyone have a solution or suggestion for this, please? I appreciate all the helps and suggestion given.
Thanks,
CK

Hi,
Thanks for the question, however, this forum is for Remote Desktop Clients related questions.
Regarding the issue, as Windows clients can connect with no problem, I suspect that it is a Mac side issue and I would like to suggest you contact Apple support for help.
Thanks.
Jeremy Wu
TechNet Community Support

The client cannot connect to the server

we just installed the boe but found that the client cannot connect to the server.
server: windows server 2008
boe xi3
client: window xp sp3
the server and client are in same dns
all components are work in server but client.
any idea on this?
ps: i can ping the server name successful.
thanks
ada
Edited by: Ada_Wei on Oct 29, 2010 10:12 AM

Can you please try to stop and disable the Windows firewall service on your client machine?
WHich client do you use and which error message do you get exactly?
Regards,
Stratos

Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials

Hello All,
I am getting following error, when trying to expand essbase from calculation manager, "Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials",
I am using EPM 11.1.2.1
Thanks
Yash

If you have moved the server to a new data center and an issue has started occurring then it could point to the change.
Are you able to log into essbase directly with Maxl using the same account?
If you run a registry report do you see any of the configuration with IPs instead of DNS/hostname
Cheers
John
http://john-goodwin.blogspot.com/

Error: Cannot connect to fulfillment server. Error: cannot find loan record.

Error: Cannot connect to fulfillment server. Error: cannot find loan record. Definitely connected to internet, authorization correct, etc. Not sure what else to look at.

Is the computer join the domain?
Run the following command to check the automatic configuration is working
Nslookup
>set type=srv
>_sipinternaltls._tcp.<sip domain>.com(for internal user)
>_sip._tls<sip domain>.com(for external user)
If you can ping to FE, please try to sign in with manual configuration.
Lisa Zheng
TechNet Community Support

RDC for MAC cannot connect to TS server with error message "You were disconnected from the Windows-based computer because of problems during the licensing protocol".

the mac clients are running RDC for mac version 2.1 and they cannot connect to Windows 2008 R2 TS server. They get the error "You were disconnected from the Windows-based computer because of problems during the licensing protocol".
really appreciated if someone have a fix for this.
thanks,
/dan

Hey,
Any proposed answer for this ?
I face the same problem and my environment
and I've got same results as dle2k
1. TS lic mode is set to per user confirmed it works for windows clients.
2. the TS server's system log logged error "The Terminal Server security layer detected an error in the protocol stream and has disconnected the client".
3. the reports shows per user cal has been issued to users. no temp per device cal has been issued.
4. yes, CoRD works .
5. we tried version 2.1.1 of the Mac RD Client but it also does not work.

External Clients cannot connect to Exchange Server

Hello all:
My external clients using outlook cannot connect to Exchange Server 2013. We have on-presmise version updated to Cu3 and after the Cu3 update we lost connectivity with Outlook clients. Many of the settings in IIS were changed after the Cu3 update,
I noticed after my http->https redirect was not applied anymore to the default website. Here is my Get-OutlookAnywhere results:
RunspaceId : 6379fab1-f692-484f-8118-99e48330d4c4
ServerName : EXCHSERV
SSLOffloading : True
ExternalHostname : mail.domain.com
InternalHostname : mail.domain.com
ExternalClientAuthenticationMethod : Negotiate
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
MetabasePath : IIS://EXCHSERV.domain.com/W3SVC/1/ROOT/Rpc
Path : D:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 775.38)
Server : EXCHSERV
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : Rpc (Default Web Site)
DistinguishedName : CN=Rpc (Default Web
Site),CN=HTTP,CN=Protocols,CN=EXCHSERV,CN=Servers,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=domain,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=com
Identity : EXCHSERV\Rpc (Default Web Site)
Guid : 596ed7a1-ceec-4a36-9cbc-617ac5214463
ObjectCategory : domain.com/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged : 12/23/2013 2:20:41 AM
WhenCreated : 11/25/2013 2:51:36 PM
WhenChangedUTC : 12/23/2013 7:20:41 AM
WhenCreatedUTC : 11/25/2013 7:51:36 PM
OrganizationId :
OriginatingServer : DOMAINCONTROLLER.domain.com
IsValid : True
ObjectState : Changed
Thanks in advance

Hi,
According to your description, users cannot connect to Exchange server 2013 both internal and external.
Please run Test E-mail AutoConfiguration in Outlook to check your autodiscover service. Also
reset your Exchange virtual directory to connect correctly. If the issue still continues after all configurations are setting properly, collect some Event logs would be helpful.
If there is any question, please post the results here for further analysis.
Thanks,
Winnie Liang
TechNet Community Support

Intermittant disconnection of Shared Drives on Windows 7 Client machines hosted in WIndows Server 2008 Standard Edition

The environment - Windows Server 2008 Standard/Windows 7 32 bit Client machine.
Share - It is not a DFS share.
Antivirus - McAfee
The issue - 1 user is unable to connect to a particular shared drive hosted from within the Windows Server 2008 Standard file server. This drive is one of the multiple drives which are supposed to be connected to the user machine during logon using
the logon script. All the other drives mentioned in the logon script gets mapped fine but one particular drive does not. The user uses a laptop and we have checked his connections while in LAN, Wireless, VPN. Everything seems to be working
fine apart from this one shared drive. Rest of the users within that office gets the drive fine but just not this one user. Since we are not domain admins so we do not have a visibility of the group policies linked to this particular drive and
hence RSOP as well does not help. We have not seen the user getting logged into the machine using a TEMP profile as well for us to ascertain that the issue may be with a TEMP profile logon.
Please note that the drive does get connected at times and at times the connection just drops off! As an interim measure the local IT has created a batch file and given it to the user which maps the drive for the user.
Any help in resolving this long impending issue would be much appreciated!
Suman

Hi Suman,
You could keep the session always active to workaround this issue. Please open Control Panel -> Administrative tools -> Local Security Policy -> Local Policy -> Security Options and set the value of the policy Microsoft Network Server:Amount
of idle time required before suspending a session to 99999 and see how it works.
This security setting determines the amount of continuous idle time that must pass in a Server Message Block (SMB) session before the session is suspended due to inactivity. Administrators can use this policy to control when a computer suspends an inactive
SMB session. If client activity resumes, the session is automatically reestablished. For this policy setting, a value of 0 means to disconnect an idle session as quickly as is reasonably possible. The maximum value is 99999, which is 208 days; in effect, this
value disables the policy.
For more detailed information, please refer to the thread below:
Loss of mapped drive, networked drive disconnects
http://social.technet.microsoft.com/Forums/windows/en-US/c6da707b-5224-40f5-8d0e-e8985453221d/loss-of-mapped-drive-networked-drive-disconnects
You could also refer to the article below to troubleshoot the issue:
Mapped Drive Connection to Network Share May Be Lost
http://support.microsoft.com/kb/297684
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Client License applicable in windows server 2008 R2

Dear Sir/ Madam
I have purchase a windows server 2008 R2 and install properly and make this machine a Domain Controller. I have connected 5 client user with this machine because Microsoft provide 5 client access default windows server 2008 R2, now we need to access more
client from this server machine. so we have purchase some more license from Microsoft then how we install / implements or apply these license for client.
does these license install on server. ?
does these license install on client. ?
we have the following details about license.
Authorization Number:
License Number:
Distributor Purchase Order Number:
License Date:
Agreement Information:
Reorder/Software Assurance End Date:
Please resolve my quire.
Thanks & regards
Krishna +91-8459060870

Hi Krishna,
Thank you for posting in Windows Server Forum.
From your description it seems that you have purchased CAL for your client to get access. Whether you have purchase simple server CAL or RDS CAL (Per user or Per Device).
If you have purchase RDS CAL then you need to have install RDS License role service and then first need to activate the RD License server. After activating we can configure the RDS CAL on RD License server and for this you might need to call the MS clearing
house, explain them your situation and they will help you to activate and configure everything. After that we also need to point our RD License server to RDSH server.
For more information, you can refer below article.
Configuring Remote Desktop Licensing
http://technet.microsoft.com/en-us/library/cc754309.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Cannot connect to SQL Server 2008 R2 Express

I have a database application that connects to the Northwind sample db in MS Access and lets the user perform CRUD operations.
Now I want to add the same for MS SQL Server, however, I have trouble connecting to it using this connection string:
I changed the server properties in SQL Server Management Studio to allow windows and SQL Server authentication, yet, I still get this exception when trying to open the connection:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I thought it might be because the server is not allowing remote connections and followed this guide to allow remote connections:
http://www.linglom.com/2009/03/28/enable-remote-connection-on-sql-server-2008-express/
But the SQL Server windows service won't start. The Browser works fine, but the server doesn't do anything.
When trying to start it I get this error:
The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details.
The event log says:
2011-07-07 17:02:55.35 spid51 Starting up database 'Northwind'.
2011-07-07 17:02:59.98 spid51 Starting up database 'Northwind'.
2011-07-07 17:03:03.68 spid53 Starting up database 'Northwind'.
2011-07-07 17:03:07.01 spid55 Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
2011-07-07 17:03:07.30 spid55 Using 'xpstar.dll' version '2009.100.1600' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2011-07-07 17:03:07.76 spid55 Starting up database 'pubs'.
2011-07-07 17:03:08.89 spid55 Starting up database 'pubs'.
2011-07-07 17:03:09.30 spid55 Starting up database 'pubs'.
2011-07-07 17:04:11.37 spid55 Starting up database 'pubs'.
2011-07-07 17:08:17.28 spid52 Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
2011-07-07 17:08:17.35 spid52 Using 'xplog70.dll' version '2009.100.1600' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
However, when starting SQL Server Management Studio, I can normally work with the databases, perform CRUD operations, etc.
I was wondering if it might be a connection string issue.
I'm using this string:
@"Server=lolcalhost;Database=Northwind;User ID=BEN-A350C47E32F;Password=;Trusted_Connection=False;";
I added the Northwind database as data source to the project and the connection string is in the app.config:
<connectionStrings>
<add name="NwindConnectionString" connectionString="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=|DataDirectory|\Nwind.mdb" providerName="System.Data.OleDb"/>
</connectionStrings>
using this code to access it:
constringServer = ConfigurationManager.ConnectionStrings["NwindConnectionString"].ToString();
but when using this string I get an ArgumentException:
Keyword not supported: 'provider'.
I'd appreciate any help that would let me connect to the server from a program.

Here is an active Sql connection string we use currently from our app.config file:
<connectionStrings>
<clear/>
<add name="ServerConnectionString" connectionString="Data Source=SqlBox;Initial Catalog=YourCatalog;User Id=Username; Password=password;" providerName="System.Data.SqlClient"/><br/> </connectionStrings>
here is one for Sql Express:
<add name="LocalConnectionString" connectionString="Data Source=MachineName\SqlExpress;Initial Catalog=YourCatalog;Integrated Security= true;" providerName="System.Data.SqlClient"/>

Dymo Labelwriter printers not working via Mac Remote Desktop connection into Windows Server 2008

I'm having a really hard time getting Dymo labelwriters (models 335 turbo and 450 turbo) to work over a remote desktop connection and I'd appreciate any help you can offer.
To briefly describe the situation, I'm working for a Doctor's office, moving their IT from a remotely-hosted environment where employees connect to their Windows Server 2008 virtual machines (hosted off-site) via Windows 7 machines through Microsoft's remote
desktop software.
The new setup will have new servers running in-house instead of remotely and will be based on Apple's Mac Mini machines running Windows 7 for some tasks through Parallels virtualization
software running directly on each employee's Mac Mini.
We have 3 of the Dymo 450 Turbo products and one 330 Turbo, each connected directly to a Mac Mini.
Here's the problem: I have Microsoft's Remote Desktop software running on the Macs natively, connected to each employee's virtual machine on the remote server for now, until the time comes to make the switch to using the new in-house server. The remote desktop
software works fine - employees are able to connect successfully and access their desktops fine. I have the "Forward Printing Devices" option checked in the Microsoft Remote Desktop app so that the hosted virtual desktops can see the local labelwriters.
However, the Dymo Label software running on the remote server will not recognize that a labelwriter is present.
If I go to the Printers and Devices window on the remote server, the labelwriter shows up fine, named "dymo labelwriter 450 turbo (redirected 10)" however running the Dymo Label software gives an error, "Dymo label says no printer connected:
dymo label printer requires a dymo label printer be installed and connected ..."
To try and narrow down the cause of the problem, on the same Mac, I ran Windows 7 via Parallels and set up a new remote desktop connection within that Windows VM. Just to be clear, instead of using the RDC software running in the Mac OS, this new connection
is using a Windows virtual machine running on the same Mac, with the RDC being established from within that Windows VM. Again, I forward printing devices and the labelwriter shows up in Printers and Devices on the remote server as "dymo labelwriter 450
turbo (redirected 10)" This time, the Dymo Label software recognizes the attached labelwriter and runs fine.
I'd appreciate any advice you can give on why, as far as the remote server is concerned, a forwarded labelwriter from Microsoft remote desktop running natively on a Mac isn't recognized
but it is if forwarded from within Windows, bearing in mind that the labelwriter shows up on the remote server in both instances and is called the same name in devices and printers.
Sorry for the long-winded question. I hope you can help me.

Hi,
Thank you for posting in Windows Server Forum.
Firstly please check whether you have driver capable for your printer with MAC MRD. Also I would like you to check with updated MRD version 8.0.9 for MAC OSX.
https://itunes.apple.com/in/app/microsoft-remote-desktop/id715768417?mt=12
Because as you have commented it can work with windows RDP, so please also try to contact Dymo Labelwriter printer and inquire regarding the issue.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Internet connection for Windows Server 2008

I have an HP ProBook 6545b notebook computer which I installed an evaluation copy of Windows Server 2008 on. I'm trying to get internet connectivity to work but as yet, it's not.
I get the message that it can't find a network interface card but even with an Ethernet cable connected, it still won't connect to the internet.
For the background, this is the first time I'm trying this on a home computer being I'm a 2012 graduate of a technical school and I'm re-reading all my computer related textbooks.
The HP notebook I'm using gets the internet connection when I have Windows 7 Professional installed.
Is/are there a driver/drivers needed or a service in 2008 I need to install? If it's a driver, where can I get it?

Hi,
That mean windows server does not recognize your network card, you can try the manufacturer driver, or the best move would be to setup a small virtual machine on your notebook, under a windows 7's OS.
You could use virtualbox, or similar product to achieve the goal.
Thanks
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

CF9 install on Windows server 2008 error

I am getting the following error message when attempting to run the installer for CF9:
Microsoft VC++ 2008 Runtime
Installer has determined that Microsoft Visual C++ 2008
Redistributable Package is not installed. Select OK to install now.
To perform your own installation, select CANCEL. After installation
restart the installer to continue.
this is Windows Server 2008 R2 brand new.
Then I installed the :
The Microsoft Visual C++ 2008 Redistributable Package (x86) installs runtime components of Visual C++ Libraries required to run applications developed with Visual C++ on a computer that does not have Visual C++ 2008 installed
vcredist_x86.exe
http://www.microsoft.com/downloads/fr-fr/details.aspx?familyid=9B2DA534-3E03-4391-8A4D-074 B9F2BC1BF&displaylang=fr
Restart the server, Reinstall CF9, same message.
I do not dare to contiune without help and certitude it will run correctly.
Please Help ,
I just bought it from the store
I even do not know how to contact Adobe, I am in France.
Pierre.

Well, I answer myself,
It needs to install the Visual C++runtime 64bits (not 32bits)
vcredist_x64.exe
Then, I still have the message, but we just have to say OK, and it will install
coorectly with Visual C++ runtime too.
Problem solved.
Pierre.

Windows Xp machines cannot connect to Windows Server 2008r2 after Update from Microsoft.

After allowing sever updates from Microsoft, My customers XP Machines can no longer connect to the Windows server shares using the server name. We get "can't find path error". I can ping the IP address but not the Net-bios name. I
can connect by ip address but have a software that must use the name "server" in an executable. The workgroup sees all of the other computers just not the server, the server see's the windows 7 machines but not the XP machines. I have
tried every fix I can find in the forums and online. I did find and AD and DNS errors during the update. Errors 4004, 4005, 4015. Things I have tried: ipconfig flushdns, renew, registerdns, nbtstat -A servername, etc.
Thanks

As IP address works but not NetBIOS name, it seems like a DNS or WINS server related issue as Milos said.
If there is no WINS server configged, check DNS settings (server side) and suffix settings (client side).
Which system is updated, Windows XP or Windows 2008 R2? You can check the recently installed updates and provide us a list about all updates just installed.
If you have any feedback on our support, please send to [email protected]

6.1 Client cannot connect 6.5 Server?

We have two versions of Essbase Server. One is 6.1 and the other is 6.5. We want to connect both server using only one set of client software. I cannot connect to 6.1 server using 6.5 client software, it said version problem or something like this. When I connect 6.5 Server using 6.1 client software, I cannot connect the server at all, it said tcp/ip problem. I can ping or telnet to the server OS. Is it possible for me to connect both 6.1 and 6.5 server using the same client software?

Generally, client software is "forwards compatible" meaning an older client can usually connect to an older server. The reverse is not true, unless you are on Essbase 6.2 or greater (the Essbase 6.5 API can talk down to a 6.2 server, but not any older).When clients are looking to upgrade, I tell them that - but in the same sentence recommend keeping client software on the same version/patch as the Essbase server. Issues like the one you are having illustrate the types of issues you can encounter - and Hyperion will just tell you to use the proper client version.That aside - one thing to check for - Essbase 6.5 allows a DBA to change the listening port of the server. The default is 1423, which the 6.1 client will try to connect to. Make sure the 6.5 server listening port has not been changed (you have to set up the parameters, so it won't just happen for no reason).Regards,Jade------------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

8.8 Client cannot connect to Windows Server 2008 error -1102

Similar Messages

Maybe you are looking for