802.11n Enabler Software on an Older iMac

I hope someone will help me here. I have a 17-inch, 1.83GHz iMac and it is apparently only supports 802.11g, accoding to the Network Utility and accordinat to this on the Apple Store site which explains that you can enable certain Macs to support 802.11n with their Enabler software.
Here's the thing. Like an idiot I paid for and downloaded the Enabler software and...you guessed it...it wouldn't load (saying my hardware wasn't correct for the software.
Yet, I have a Gigabit Netgear Switch which reports with a green light when it is negotiating at a Gig and an orange light when negoitating lower than a Gig. My Mac is negotiating at a Gig, according to the green light on the Gigabit Netgear Switch.
Can anyone tell me if this Mac is really enabled for a Gig negotiation (802.11n) or is my switch not reporting correctly?
Here is the quote from the Apple Store for the Enabler software.
"If you have a Mac with an Intel Core 2 Duo processor (except the 17-inch, 1.83GHz iMac) or a Mac Pro with AirPort Extreme, you can enable it to access an 802.11n wireless network using the AirPort Extreme 802.11n Enabler software."
If someone could shed some light on this, I truly would be appreciative.
Charles

Thanks Niel,
That really helps me out. Do you know if I were to purchase the newest Airport Base Station Extreme, would it show up as a Gigabit device if I connected to my home network via an ethernet cable? I only need it for a hub in a remote part of my home, and I can easily get an ethernet cable to it.
It's a related question to my first question, since I'm really trying to understand the speed differences in wired versus wireless networks.
Thanks again for you quick reply,
Charles

Similar Messages

  • Airport Extreme 802.11n Enabler software

    Today I purchased an Airport Extreme and was able to set it up quickly
    on my iMac (2.15 GHz Intel Core Duo). I was also able to connect to it
    on my MacBook (2.0 GHz Core Duo). In looking at the connection information
    from the Airport the MacBook is connected using 802.11a.
    The Apple Store says that the Airport Extreme includes the 802.11n enabler software, but
    I was only able to find the software package for controlling the router.
    I must be missing something. Any help would be appreciated.

    Sorry but Core Duo Macs do not have 802.11n hardware.
    Only Core 2 Duo Macs have the 802.11n hardware.
    The enabler is on the disc but isn't compatible with your Macs.

  • 802.11n* Enabler will not install

    hey guys.
    I have purchased my copy of the 802.11n* Enabler for my 20" iMac Core 2 Duo 2GHz, but I keep getting a message saying "Your computer does not meet the hardware requirements for this update.".
    My iMac meets all of the requirments as far as I know (Leopard 15.5)
    I also tried installing it on my Macbook (Tiger 14.9) but I get the same message.
    any thoughts as to why this is and how I can fix it??
    thanks
    GK

    Airport Extreme refers to my wireless card build it right, and not my router (which is not an airport, but is an "n").
    Apple uses the term "AirPort Extreme" for the built-in wireless on the newer Macs so it tends to get confusing when they use the same term for their base stations. In this case, the "n" enabler is a firmware update to the built-in AirPort Extreme in your iMac. Similarly the "AirPort Extreme Update 2007-002" is a software update for this same built-in device. All firmware updates to the base station itself are done through the AirPort Utility.
    I'm not sure why you are having difficulty updating your iMac as it appears, according to your description, to be eligible. To double-check, that it may already be installed take a look at this Apple article: How to tell if 802.11n-enabling software is installed

  • Can't perform 802.11n enabler upgrade on MacBook!

    I wonder if anybody could help?!
    I've just bought the 802.11n enabler software for my 2Ghz MacBook. I have installed all updates suggested by Software Update, and when I run the 802.11n enabler it says that my hardware is not compatible with the upgrade.
    I tried to manually install the 2007-002 and 2007-003 Airport Extreme updates, but when I run these I am not able to use them because it says the hard disc is not a valid volume.
    Is there something I am missing?
    Thanks in advance!

    I think you'll find that your MacBook is not compatible.
    The only hardware that works are Macs that shipped with the 802.11n hardware already installed.
    The compatible hardware were all MacPros and iMacs and laptops with Core 2 Duos. The Core Duo machines were earlier models.

  • AirPort Extreme 802.11n* Enabler for Mac 4 use with Touch?

    Hello,
    I have a 2nd Gen Touch with the latest updated software. I use Airport to connect to the internet on my new iMac 24". Will the AirPort Extreme 802.11n* Enabler software now offered in the Apple store($1.99) for Mac improve communications between the Touch and my iMac?
    Thanks

    Nope. Your touch is still limited to b/g mode wireless. In fact, if you have an all n network, your touch won't even know that it exists.
    Most of your Mac to iPod communication is via the USB cable unless you are using Remote or other applications that can move files on and off.
    BTW, that software is to enable early intel Macs to use N wireless. If your Mac is relatively new, you won't need it.
    Message was edited by: luvlabs

  • 802.11n enabler not installing on Leopard

    MACBOOK PRO getting error (after re-purchasing the 2 dollar 802.11n enabler) on Leopard
    Tried to install and it tells me cannot install on this hard drive
    Help!!!!!

    If you have Leopard installed, the enabler must be included in the install because I followed the directions listed on that page...
    +Before purchasing the 802.11n Enabler software, please check to make sure that your Mac does not already have the 802.11n enabler already installed.+
    +Open Network Utility (found in the Applications > Utilities folder)+
    +Under the Info Tab, choose Network Interface (en1)+
    +In the section "Model: Wireless Network Adapter," if it says (802.11a/b/g/n), you already have the 802.11n enabler installed. If it says (802.11a/b/g), you do not have the 802.11n enabler installed.+
    I looked and mine says a/b/g/n so its already installed and I didn't download that enabler. You may way want to try uninstalling it. Hope that helps, good luck
    edit: i have leopard installed as well, forgot to mention that.
    Message was edited by: vinyl313

  • Installing 802.11n enabler?

    I have just purchased a new Airport Extreme (802.11n) and installed the Airport Utility included on the accompanying CD. The installation process said it was also installing the 802.11n enabler software. However when I run Network Utility, my network interface is still listed as "Wireless Network Adapter (802.11 a/b/g)".
    I noticed that the installer DID install a file called "AirPort Extreme 802.11n Enabler.pkg" on my hard drive. But when I launch this manually I get the error: "Your computer does not meet the hardware requirements for this update".
    My machine is a 15" MacBook Pro with a Core Duo 1.83GHz processor. My understanding is that this should be compatible with the "n" enabler (I believe apple's specs say all MacBook Pros are compatible). Why isn't it being enabled correctly? Is it not compatible for some reason?
    Any help is appreciated. Thanks!

    Hello tizzdogg. Welcome to the Apple Discussions!
    Sorry, but your MacBook Pro must have the Intel Core 2 Duo chip to be eligible for the "n" enabler.

  • Airport Extreme 802.11n Enabler wont install

    hi,
    i just bought the Airport Extreme 802.11n Enabler for my MacBook Intel Core Duo. when i opened the disk image and tried to install, i got an alert saying my computer does not meet the hardware requirements - even though it is a MacBook Intel Core Duo.
    i followed all instructions on the Apple Store page before purchasing, including checking my Network Utility to verify whether i needed the software. currently i only have the 802.11 a/b/g adapter. see:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/canadastore.woa/wa/RSLID?mco=B4 8E8262&nplm=D4141ZM%2FA
    any suggestions? my MacBook is a week 25 model.
    thanks,
    gimiwan

    Your computer needs to be a Core 2 Duo-based Mac for the enabler to install, as the necessary hardware isn't present on an older processor or a 1.83GHz 17-inch iMac. If your computer supports the enabler, install this software and try installing the enabler again.
    (19825)

  • AirPort Extreme 802.11n* Enabler for Mac

    I just downloaded the enabler for my 20" iMac and when I try to install it, it states "Your computer does not meet the hardware requirements for this update." It's my understanding that only the 17" iMac and the Mac mini aren't supported. Anyone else experience this?

    If you recently got you imac and it's a core 2 duo, check if you already have it installed using this quote form appleinsider.com
    The company recommends that customers check to make sure that their Mac does not already have the 802.11n enabler installed before purchasing the software patch. To do so, Intel Mac owners should open the "Network Utility" application (found in the Applications > Utilities folder), choose "Network Interface (en1)" under the "Info" tab, and then inspect the information provided under "Model: Wireless Network Adapter." If it says "(802.11a/b/g/n)," the Mac already has the 802.11n enabler installed. If it says (802.11a/b/g), the Mac does not have the 802.11n enabler installed.

  • 802.11n Enabler does not work!

    I have a MacBookPro with Core Duo. I bought an AirportExtreme Basestation and installed the software... it showed me that it also installed the 802.11n Enabler. BUT: when I go to the network utility program and select "en1" it still only shows a/b/g compatibility. I re-installed a few time, but it wouldn't change.
    This, of course, has also the effect that when selecting the 5GHz 802.11n at the basestation, my computer wouldn't find the basestation at all (have to reset it afterwards).

    The 802.11n enabler works in Macs with the Core 2 Duo processors, not the Core Duo. I understand that you can upgrade the wireless card by buying a replacement from Apple.
    There are other threads here that describe doing this.

  • 802.11n Enabler for MacBook Pro not included

    Apple's page about the Airport Extreme Base Station says, "Most new Mac computers ship with built-in 802.11n wireless support that can be easily enabled with the installation of enabler software included with new AirPort Extreme wireless base station (see sidebar)."
    Yesterday I purchased the Airport Extreme 802.11n WiFi Wireless Base Station (Model MB053ZA/A A1143). I have installed it OK and it is running fine. But I now want to "enable" 802.11n on my MacBook Pro but can not figure out how to do it.
    I have searched everywhere through the box and looked everywhere on the one install disk (disk version 2.1 2Z681-6107-A) but I can not find anything that looks like enabler software for the WiFi network card in my MacBook Pro 2.16 GHz Intel Core Duo. The en1 page in Network Utility shows Model: Wireless Network Adapter (802.11 a/b/g).
    How is the enabler normally shipped in the AirPort Extreme wireless base station package? On a separate disk? On the install disk? As a free download?
    Regards
    Peter

    I have searched everywhere through the box and looked everywhere on the one install disk (disk version 2.1 2Z681-6107-A) but I can not find anything that looks like enabler software for the WiFi network card in my MacBook Pro 2.16 GHz Intel Core Duo.
    There were several MacBook Pro models with 2.16 GHz Intel Core Duo processors. Your computer must be have a Core 2 Duo processor to qualify for the enabler.
    How is the enabler normally shipped in the AirPort Extreme wireless base station package? On a separate disk? On the install disk? As a free download?
    There is only a single installation disk that is provided with the base station. The enabler software is located within the AirPort.mpkg package. There is a download, but it is not free. (ref: AirPort Extreme 802.11n Enabler for Mac)

  • 802.11n enabler (AirPort Extreme Update 2007-001/2007-001 update)

    Hi,
    I'm thinking of getting time capsule and then getting the 802.11n enabler.
    On the UK apple store(http://store.apple.com/Apple/WebObjects/ukstore.woa/wa/RSLID?mco=17BDE0AD&fnode= home/shopmac/mac_accessories/airportwireless&nplm=D4141) it states i need the AirPort Extreme Update 2007-001, but I can't find it.
    On the US store (http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=en abler) it states i need the AirPort Extreme Update 2007-002 update. I found that one and downloaded it but when trying to install it says "This volume does not meet the requirements for this update".
    What do I need to to get this update??
    Do I already have it??
    Am I even able to get 802.11n??
    Any help will be welcomed
    For clarification these are my specs taken from system profiler.
    Model Name: iMac
    Model Identifier: iMac5,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 4 MB
    Memory: 2 GB

    So it looks like I can't get 802.11n on my mac then. Oh well, good excuse for a new mac.
    The apple store is quite misleading then it says you need either:
    MacBook Pro with Intel Core 2 Duo
    MacBook with Intel Core 2 Duo
    Mac Pro with AirPort Extreme option
    iMac with Intel Core 2 Duo (except the 17-inch, 1.83GHz iMac)
    I have the latter iMac with Intel Core 2 Duo (2.16Ghz), will probably get time capsule anyway though.

  • AirPort Extreme 802.11n* Enabler

    The Apple Store page for this 'Enabler' says it comes included with the latest AEBS. If this is so, how do you access the update to install it on your machines? There seems to be a complete lack of information on this.
    Any help greatly appreciated...

    I've purchased the update and i am not able to install it. I get as far as to the point where you have to choose the HD where you want to install it in. I get a red exclamation mark saying "You cannot install Airport Extreme 802.11n Enabler on this volume. This volume does not meet the requirements for this update."
    I have installed all the software updates and still getting this message....Can anybody help me/tell me what i'm doing wrong?
    Thanks for any help!!

  • AirPort Extreme 802.11n* Enabler not working

    Hello, I just installed the Time Capsule software onto my 1st gen MacBook. I saw that it installed the AirPort Extreme 802.11n Enabler, but after looking at the network utility. All that show up is: Wireless Network Adapter (802.11 a/b/g), it does not give the little 'n.' I ran the installer twice, but no joy. Any help would be great!
    Thanks!

    ursina, Welcome to the discussion area!
    Go to the Apple menu and select about this Mac. Does it say "Intel Core Duo" or "Intel Core 2 Duo"?
    Only the Macs with "Intel Core 2 Duo" processors have the 802.11n hardware. If you Mac book has the "Intel Core Duo" processor the enabler is useless.

  • AirPort Extreme 802.11n* Enabler Problems

    I just bought the AirPort Extreme 802.11n* Enabler for my 2 GHz MacBook with and Intel Core 2 Duo processor recently and when I try to install it, it tells me, "Your computer does not meet the hardware requirements for this update." I have installed all of the software updates that are available and it is still not working. Anyone have any ideas?!

    There isn't much you can do... There are ways of taking apart your macbook and replacing the Airport extreme card inside but it probably isn't worth it. I guess thats about it.
    Just next time, make sure you check what hardware you have before buying.

Maybe you are looking for