802.1X Athentication Successful but can't ping Default Router. PSK works fine

Got an interesting scenario. I am labbing out 802.1X authentication for wireless with a Cisco 2504 WLC along with a Windows Server 2012 r2 with AD, DHCP Server, DNS Server, Certificate Services, and NPS. I was able to make the different parts communicate and was able to successfully authenticate with an account I created on AD. Under my windows server event viewer, I received confirmation message: "Network Policy Server granted access to user." I received a valid IP address from the DHCP server. Computer is on the domain. Everything looks like it is working perfectly. I even checked the debug on my WLC looking for the mac address of my device but I received the "Processing Access-Accept mobile <MAC-ADDRESS>" message.
Here comes the problem. I created 2 WLAN’s to test. One was PSK while the other was 802.1X. They share the same interface on the WLC, so they have the exact same configurations. On my PSK everything works fine, I can browse Internet and ping devices within the network. On the 802.1X, I am able to ping the controller, but nothing else. Can’t ping gateway nor my dhcp server. Any thoughts?
Best Regards,
Sean

In your testing the device that connected with psk is the same device that connected to TLS?

Similar Messages

TS3276 On iMac with Mountain Lion I am now unable to send but can receive e-mails. Previously worked fine. I use an iCloud acct and Safari browser. Internet connection is wireless via cable modem. Any suggestion? Thanks.

On iMac with Mountain Lion I am now unable to send but can receive e-mails. Previously worked fine. I use an iCloud acct and Safari browser. Internet connection is wireless via cable modem. Any suggestion? Thanks.

Hi tarifiq and welcome to the BlackBerry Support Community Forums!
Can you send me a private message with your PIN so I can check this out for you?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Face time I can't hear the person I call but can see them and there end works fine! Also it says they are busy and won't connect but they get straight through me

When using face time I can see the person but can't hear them they can see and hear me, also won't let me call them saying they are busy but they can call me

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

HT4759 updated to Lion, from snow leopard after updating all necessary programs & system, recieved emails saying it was successful changing to icloud but can i access iclound No - nothing works! webmail & mail - also reset password.

updated to Lion, from snow leopard after updating all necessary programs & system, recieved emails saying it was successful changing to icloud but can i access iclound No - nothing works! webmail & mail - also reset password.

Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks check_helo_access hash:/etc/postfix/helo_access reject_non_fqdn_hostname reject_invalid_hostname permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions. You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up. Private/policy I think relates to grey listing. Maybe gives you a hint.

I can't seem to use the 'Check seats' link on Delta when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine.

I can't seem to use the 'Check seats' link on the Delta Airlines site when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine. I love Firefox but this sucks!

That issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies

I'm trying to connect a LAN printer, HP Color Laser Jet 3800dn, through a Time Capsule but no one on the network can see it. The printer works fine if I connect it directly to my iMac. Any suggestions?

I'm trying to connect a LAN printer, HP Color Laser Jet 3800dn, through a Time Capsule but no one on the network can see it. The printer works fine if I connect it directly to my iMac. Any suggestions?

Hi Clark
There is a good chance the printer is just getting auto IP internally..
Plug it into your TC. And then set to dhcp via the controls on the printer.
If you know the name of the printer it should be immediately available to the network.. but anyway, you can find its IP by printing out the test page. That will also give you the network name.
Most later HP printers have web access to the print servers.. just type the ip into your browser and see if it comes up.
From the Mac, you should then be able to set it up via the printer preferences. Most HP will just appear.. but if not you should perhaps delete the local version and then check again for network printers.

Downloaded this game, "Where's My Water 2" and before I can even start it asks for my age but freezes and wont move. I've rebooted, turned off, removed and reinstalled and it still wont work but on all my previous iPhones it worked fine.

Downloaded this game, "Where's My Water 2" and before I can even start it asks for my age but freezes and wont move. I've rebooted, turned off, removed and reinstalled and it still wont work but on all my previous iPhones it worked fine.

Sorry if I sound stupid but how do I contact the developer? Where would I find that information?

I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define

I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
Thanks,
Eyal

I tried this! Somebody suggested it in another thread. It did not work, sadly.

Hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

Hello, give this a try...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

This isn't achely a question it's about iPod not iPhone but can Apple. Make all apps work with iOS 7 even when it's really old

This isn't achely a question it's about iPod not iPhone but can Apple. Make all apps work with iOS 7 even when it's really old

And it's totally impractical for any OS to provide complete backwards compatibility in perpetuity. So no, Apple cannot grant your request. As WJ said, it's the developers' reponsibility to provide updates to their applications to be compatible with newer operating system releases, whatever the platform might be.
Regards.

I have Adbobe 7, and need to print a stamp, but can't download items to my work computer. Is there another way?

I have Adbobe 7, and need to print a stamp, but can't download items to my work computer. Is there another way?

What is the problem you have with printing a stamp?
What Adobe product (at version 7) do you have?

I have downloaded a calendar app but can't add events. I have gone to settings but can't locate default calendar as suggested, turned the iPad off etc as suggested.

I have downloaded a calendar app but can't add events. I have been to settings but can't locate default calendar as suggested, have also turned the app off and on as suggested.

You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
This is a brand new MacBook Pro (15-inch, mid-2012) just received. I suspect that this is a hardware problem as:
The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
The new MacBook Pro powers an Apple Thunderbolt display without issue.
Both MacBook Pro's are running OSX Lion 10.7.4.
The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
All adapters and components (mini-displayport adapters) are Apple retail adapter.
I have tried several external monitors, including my Dell U2412m.
When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode. Using the "Detect displays" button has no effect, even when used multiple times. Rebooting does not help, nor does resetting the SMC or PRAM.
Any other suggestions before I take it to the Genius Bar?

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

Just started to update my phone to iSo5 when wireless connection was lost on my laptop, I can't get it back and it says there are no networks available-router is working fine, am using it on my iPhone now. Help!

I just updated itunes and started to update my phone to iSo5 when wireless connection was lost on my laptop, I can't get it back and it says there are no networks available-router is working fine, am using it on my iPhone now. Help!

Reboot your router. You by chance dont have a netgear N300 WNR2000 router do you? I had one of those and would lose wifi on it constantly, Switched to a Cisco wifi router and it works much better.

TS3591 Updated itunes - windows quickly shuts it down and says something about "Data Execution Prevention". I followed the instrucxtions to a dead end. I have re downloaded it twice and used the repair files once but get the same result. It worked fine be

Updated itunes - windows quickly shuts it down and says something about "Data Execution Prevention". I followed the instrucxtions to a dead end. I have re downloaded it twice and used the repair files once but get the same result. It worked fine before I updated it to death.

Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

802.1X Athentication Successful but can't ping Default Router. PSK works fine

Similar Messages

Maybe you are looking for