8520: problem to update OS 5

Hello
No possible to move my 8520 to OS5
Desktop offers me only OS4-6 or older version
the same when I try updating online
thank you for any help or tutoriel or information

Hey Robin460,
Welcome to the BlackBerry Support Community Forums.
Thank you for the question. Updates are determined by your network service provider, if you go to www.blackberry.com/update on your PC it will check for the latest updates for your BlackBerry® Curve™. If it shows there is no update available then you have the most up to date software.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Similar Messages

CS4 Master Collection - Problem Applying Updates

Hi
I'm running the CS4 Master Collection on Windows Vista Ultimate 32-bit, SP2.
Normally I have no problem applying updates to the various Adobe components when they become available, however for a while now I've been unable to instal an update that's reported as being available for Adobe Media Encoder 4.1.0.
If I run the "check for updates" manually I can download the update (reported as being 63.7MB) and when I attempt to instal it the installation process appears to run. It finishes after a while and the Adobe Updater reports "The Udating Process is Finished" in a single dialog box with a single button entitled "Quit" - which seems odd as "Quit" implies "finish earlier than planned", I'd have expected something more in line with "All done", something like "OK".
Anyway, when I run the check for updates again I'm told about the same update implying that it wasn't applied successfully.
I get this behaviour whether I run the update as an Administrator or not (all other updates for other products are applied without problem). I also get it regardless of whether or not I reboot the machine after trying to apply the update.
Does anyone have any suggestions on what could be causing the problem ? I couldn't find anything obvious or obviously relevant in any of the Windows event logs on the PC.
Thanks for any ideas
Steve

I am having the same problem. I found a forum that suggested this. Apparently it worked for some people, but not for me. Let me know if it does:
1. Start -> All Programs -> Accessories
2. Right-click on Command Prompt and select "Run as..."
3. Run as Administrator (even if you are logged in as Admin. You need to run in the Black Command Prompt, not the White one)
4. Run: regsvr32 JScript.DLL
5. Then run: regsvr32 vbscript.DLL
(dont forget the spaces, or it won't work)
6. Then try running the set up again
As i said, it worked for some on the forum, but not others (like me). Try it and see if works for you

Problem with updating the PC Updater software

Good evening (from Germany). I have a problem with updating my Nokia Software Updater. I can download the setup and I can execute this. But when the installation starts (0%) a error message appears. It's a problem with Windows Installer but I don't know how to solve the problem. Here is a picture with the exactly error message:
http://img-up.net/?up=Nokia_probES8HJXXg.jpg
I hope somebody knows the anser with this software...
Greetings
OS: Windows XP SP2
Phone: Nokia 3110 classic Firmware: V 5.50
Message Edited by dernamenlose on 24-Apr-2008 08:56 PM

Good morning (from Denmark).
I hve the same problem.
OS: WinXP SP2
Phone: N73.
Greetings.

Problem while updating the Support Package 17 on my SAP WAS SP9

Hi,
I'm facing problem while updating the Support Package 17 on my SAP WAS SP9
ERROR 2006-10-13 10:23:22
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).
Please help me in this regard.....
Thanks in advance...
Satya

Hello gentlemen, I am also having problem with the following running on 64 bit Windows and SQL2005/64 bit. I am erroring in Step 8 'Updating JDBC' driver. I am attempting to update from SP9 to SP18. The WEBAS Jave installed went flawless but I seem to be stuck here. Any help is appreciated...
ERROR 2006-11-22 10:13:57
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).

In updating iPhoto 7.1.5 to 9.4.3. I have four different Libraries. Is there a problem in updating all four Libraries from 7.1.5?

In updating iPhoto 7.1.5 to 9.4.3 I have four different Libraries. Is there a problem in updating all four Libraries from 7.1.5?

No. Once you have upgraded iPhoto to 9.4.3 launch it with the Option key held down and select each library in order. iPhoto will convert the library to the new version.
As always, be sure you have a backup copy of each library before proceeding.
OT

Hello, I have this problem on updating applications on my iPhone 4s 5.1.1 i dont know if you can help me with. when ever i want to update an application on apple store i get a different user name then mine(slamdance@cracked.by) this user name is not mine

Hello,
I have this problem on updating applications on my iPhone 4s 5.1.1 (jail broken) i dont know if you can help me with.
when ever i want to update an application on apple store i get a different user name then mine([email protected]) this user name is not mine but its always there only on updating my app's.
thanking you in advance for your kind help.

Under the Terms of Use of this forum it is prohibited to discuss jail breaking. By jail breaking your iPhone you void any warranty you may have and forfeit any support from this forum.

Problem in update snow leopard 10.6. 2 to version 10.6.4 on Imac 27 "I7

Problem in update snow leopard 10.6. 2 to version 10.6.4 on Imac
27 "I7
When do the automatic update of version 10.6.2. to version
10.6.4 when it comes to "Apple" and the hourglass to "think" that moment appears on the screen too fast some risks.
Does anyone know how to solve this? I happen to other customers?

Hi slbruilima
The best way to bring the system up to date from 10.6.2 is to download and install the 10.6.4 Combo Update from the following link. > http://support.apple.com/kb/DL1048
Dennis

Problem in Update Statement

I got some problem in update statement.Can anybody discuss with me regarding my problem? Below is the occured problem.
//all the declaration like Connection, ResultSet are declared, setting the ODBC path and so on steps have been set up before this method. When compile it, no error, when I start to run my program, the program�s interface is shown, but the following error was appearred and data cannot be updated, can anybody tell me where is my mistake?
//ERROR:SQL Error in update statement:java.sql.SQLException [Microsoft][ODBC][ODBC Microsoft Access Driver] Syntax Error in UPDATE statement.
//emp_overview is the table name
// last_name, first_name, office_phone�.is the attributes of the table
//this method had declare in the interface class already
public String updateData (String idd, String ln, String fn, String op,
               String oe, String hp, String ps, String ss)
               throws java.rmi.RemoteException
     {//begin of this method
          String result ="";
          try
          Statement statement = connection.createStatement();
          String sql = "UPDATE emp_overview SET" +
          "last_name=' "+ln+
          " ', first_name=' "+fn+
          " ', office_phone=' "+op+
          " ', office_ext=' "+oe+
          " ', home_phone=' "+hp+
          " ', primary_skill=' "+ps+
          " ', secondary_skill=' "+ss+
          " ' WHERE id="+idd;
          statement.executeUpdate(sql);
          statement.close();
          catch (java.sql.SQLException e)
     System.out.println("SQL Error in update statement: "+e);
          //throw a RemoteException with the exception
          //embedded for the client to receive
     throw new java.rmi.RemoteException("Error in Updating exist row into DB", e);
          return result;
     }//end of this method

Hi Kevin,
According to the code you have posted, it looks like you are missing a space between "SET" and "last_name". I suggest you add the following line of code:
System.out.println(sql);
before the invocation of "executeUpdate()".
I also suggest you add the following line of code:
e.printStackTrace();in your "catch" block.
Hope this helps.
Good Luck,
Avi.

Problem in Update statement using Execute Immediate

Hi All,
I am facing problem in update statement.
I am creating dynamic sql and use "execute immediate" statement to execute a update statement.
But it is not updating any thing there in the table.
I have created a query like :
update_query='Update '|| Table_Name ||' t set t.process_status =''Y'' where t.tid=:A';
Execute immediate update_query using V_Id;
commit;
But it is not updating the table.
I have a question , is execute immediate only does insert and delete?
Thanks
Ashok

SQL> select * from t;
                 TID P
                 101 N
SQL> declare
2     V_Id          number := 101;
3     Table_Name    varchar2(30) := 'T';
4     update_query varchar2(1000);
5 begin
6     update_query := 'Update '|| Table_Name ||' t set t.process_status =''Y'' where t.tid=:A';
7     Execute immediate update_query using V_Id;
8     commit;
9 end;
10 /
PL/SQL procedure successfully completed.
SQL> select * from t;
                 TID P
                 101 Y

Problem in UPDATE statement In Multiple Record Block

Hi Friends,
I have problem in update Statement for updating the record in multiple record data Block.
I have two data Block the master block is single Record block and the 2nd data block is Multiple Record data Block.
I am inserting the fields like category,and post_no for partiular job in single data block
Now in second Multiple Record Data Block,i am inserting the multiple record for above fileds like no. of employees work in the position
There is no problem in INSERT Statement as it is inerting all record But whenever i want to update particular Record (in Multiple Block) of employee for that category and Post_no
then its updating all the record.
my code is Bellow,
IF v_count 0 THEN
LOOP
IF :SYSTEM.last_record 'TRUE' THEN
UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;
IF SQL%NOTFOUND THEN
INSERT INTO post_history(post_no,roster_no,category,idcode,joining_post_dt,leaving_post_dt,entry_gp_stage)
VALUES(g_post_no, g_roster_no, g_category, :POST_HISTORY_MULTIPLE.idcode, :POST_HISTORY_MULTIPLE.joining_post_dt,
:POST_HISTORY_MULTIPLE.leaving_post_dt,:POST_HISTORY_MULTIPLE.entry_gp_stage);
END IF;
next_record;
ELSIF :SYSTEM.last_record = 'TRUE' THEN
UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;
IF SQL%NOTFOUND THEN
INSERT INTO post_history(post_no,roster_no,category,idcode,joining_post_dt,leaving_post_dt,entry_gp_stage)
VALUES (g_post_no,g_roster_no,g_category,:POST_HISTORY_MULTIPLE.idcode,
:POST_HISTORY_MULTIPLE.joining_post_dt,:POST_HISTORY_MULTIPLE.leaving_post_dt,:POST_HISTORY_MULTIPLE.entry_gp_stage);
END IF;
EXIT;
END IF;
END LOOP;
SET_ALERT_PROPERTY('user_alert',ALERT_MESSAGE_TEXT, 'Record Updated successfuly' );
v_button_no := SHOW_ALERT('user_alert');
FORMS_DDL('COMMIT');
CLEAR_FORM(no_validate);
Please Guide me
Thanks in advence

As you do a loop over all the records in the block, of course every record is updated.
Also, what you do is not the way is intended to be used. In general, you base a block on a table,then there is no need at all for writing INSERT's or UPDATE's. Forms also know's then, which records to be updated and which not.

Problem In Update Statement In Multiple Record Data Block

Hi Friends,
I have problem in update Statement for updating the record in multiple record data Block.
I have two data Block the master block is single Record block and the 2nd data block is Multiple Record data Block.
I am inserting the fields like category,and post_no for partiular job in single data block
Now in second Multiple Record Data Block,i am inserting the multiple record for above fileds like no. of employees work in the position
There is no problem in INSERT Statement as it is inerting all record But whenever i want to update particular Record (in Multiple Block) of employee for that category and Post_no
then its updating all the record.
my code is Bellow,
IF v_count <> 0 THEN
LOOP
IF :SYSTEM.last_record <> 'TRUE' THEN
UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;
IF SQL%NOTFOUND THEN
INSERT INTO post_history(post_no,roster_no,category,idcode,joining_post_dt,leaving_post_dt,entry_gp_stage)
VALUES(g_post_no, g_roster_no, g_category, :POST_HISTORY_MULTIPLE.idcode, :POST_HISTORY_MULTIPLE.joining_post_dt,
:POST_HISTORY_MULTIPLE.leaving_post_dt,:POST_HISTORY_MULTIPLE.entry_gp_stage);
END IF;
next_record;
ELSIF :SYSTEM.last_record = 'TRUE' THEN
UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;
IF SQL%NOTFOUND THEN
INSERT INTO post_history(post_no,roster_no,category,idcode,joining_post_dt,leaving_post_dt,entry_gp_stage)
VALUES (g_post_no,g_roster_no,g_category,:POST_HISTORY_MULTIPLE.idcode,
:POST_HISTORY_MULTIPLE.joining_post_dt,:POST_HISTORY_MULTIPLE.leaving_post_dt,:POST_HISTORY_MULTIPLE.entry_gp_stage);
END IF;
EXIT;
END IF;
END LOOP;
SET_ALERT_PROPERTY('user_alert',ALERT_MESSAGE_TEXT, 'Record Updated successfuly' );
v_button_no := SHOW_ALERT('user_alert');
FORMS_DDL('COMMIT');
CLEAR_FORM(no_validate);
Please Guide me
Thanks in advence

UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;
UPDATE post_history
SET idcode = :POST_HISTORY_MULTIPLE.idcode,
joining_post_dt = :POST_HISTORY_MULTIPLE.joining_post_dt,
leaving_post_dt = :POST_HISTORY_MULTIPLE.leaving_post_dt,
entry_gp_stage = :POST_HISTORY_MULTIPLE.entry_gp_stage
WHERE post_no = :POST_HISTORY_SINGLE.post_no
AND category = :POST_HISTORY_SINGLE.category
AND roster_no = :POST_HISTORY_SINGLE.roster_no;
AND idcode = :POST_HISTORY_MULTIPLE.idcode;These update statements are without where clause, so it will update all records.
If it is specific to oracle forms then u may get better help at Forms section.

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

Problem to update Extension Manager

Problem to update Extension Manager 6.0.7
Errore Code: U44M1P7
MAC OS X 10.8.4
For 4 times I contact via chat the support but someone answer me and tell Please wait while I transfer the chat to the appropriate group.
But nobody taka care me of the problem!

Nereis can you please check your installation logs for error messages? Please see Troubleshoot with install logs | CS5, CS5.5, CS6, CC - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to locate and interpret your installation log files. Please feel free to post any specific error messages you discover to this discussion.

Problem about updating to Mac OS X 10.5.3

Hi there,
I just bought my Macbook two months ago. I encounted a problem about updating it to the latest version of MAC OS X. The system reminded me to restart, I proceed. Everythig looked just fine until a poping up window shown "Mac OS X 10.5.3 pacakage can not be validated". Dose anyone know what did that mean? How can I update my little mac?

Hi Hummer,
First, welcome to Apple discussions.
To answer your question, your computer checks all downloaded updates before installing them. It does this to make sure it's got the entire file and that the update will install correctly. The fact that validation fails on your machine probably means the file did not download correctly.
To install 10.5.3, simply go to this website, download the "10.5.3 combo update" and then run it on your Mac: http://www.apple.com/support/downloads/

Problem: Flash update on Mac OS 10.411

A few days ago I was prompted to update Flash Player (youtube videos had suddenly stopped playing on the old version I had) and went ahead and did it. I go through the installation process and as far as I can tell nothing goes wrong. But I still can't watch videos online and the same message is always displayed "you need to update Flash, etc."
I have Mac OS 10.411 which I guess is 64-bit. I have Safari 4.1.3. I can't update Safari any further with the current OS. I can't download newer versions of Chrome or Firefox.
What I've done so far x 10:
-run the uninstaller
-run the installer ["Flash Player 10.3 for Mac OSX 10.4-10.5 (Intel)" on the installation page]
-checked http://www.adobe.com/software/flash/about
to test if any older versions are still installed on the computer. Just says "missing plug-in", so I guess not.
I see under system preferences that version 10.3.183.10 is installed, which is the newest version the site gives me.
Thanks for looking at my question. Anyone know what to do?

We both have Tiger installled otherwise known as os 10.4.11, as well I have safari 4.1.3 and flash 10.1 , I believe flash 10.3 will not work with OS 10.4.11 (its for a higher version of lion or leopard or something)
Make sure box in preferences advanced tab "show Develop menu in menu bar" is checked as I mentioned before and then do a 10.1 flash download in that order, I think I read flash 10.3 is too high for safari 4.1.3 and Flash 11 is definitely too advanced for Tiger, as well Tiger can not run Firefox or Chrome as a browser, thus the need to get a version of flash that works on your OS Safari version ..hope this [email protected],   FYI: You should google the error message that pops up in quotes along with your os version for good search results of any issue.
Date: Tue, 29 Nov 2011 03:50:49 -0700
From: [email protected]
To: [email protected]
Subject: Problem: Flash update on Mac OS 10.411
    Re: Problem: Flash update on Mac OS 10.411
    created by buchisells in Installing Flash Player - View the full discussion
I have the same problem!
I also have mac osx 10.4.11(intel) and was asked to upgrade to the latest flash player...but when I did, suddenly couldn't load/watch any videos.
Tried the same things you did, to no avail (uninstalled and installed flash player 10.3 over and over, and still nothing)..it's as if i didn't install it when I did.
And because of my os version, can't avail of the archived flash players on this site
Help please!
I tried fixing my Safari preferences but still doesn't work.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4051913#4051913
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4051913#4051913. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Installing Flash Player by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

8520: problem to update OS 5

Similar Messages

Maybe you are looking for