890fx board having touble with ethernet connection
i own an 890 fx mother board and i am having trouble connecting to the internet through my ethernet cable. i have checked the cables to make sure they work and i have checked both of my ethernet ports neither of them work. the internet through the ports was working perfect a day ago but seems to have stopped working any thoughts guys i really dont want to rma it
when i plug in the cable i get lights that show that it is plugged in. the devices manager shows the ethernet and they register. in my network connections it shows connection to internet however i can not connect to anything.
Similar Messages
-
y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all
Giancarlo Messalli wrote:
1) are you sure a reset holding the reset button will not delete my data?
Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
Thank you again
I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
Here is the Apple info on reset.
http://support.apple.com/kb/ht3728
And here is the quote from the horse's mouth so to speak.
Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility. -
Hi,
I just got a new iphone for my birthday and I went to transfer my purchases from my ipod to my iphone. then it requested a password so I tried all the passwords I knew. I was wondering how can you find the icloud password that i set up and change it, and I tried looking at all the help with the icloud but it didn't help at all.that doesnt make anysense, its either you or you dont.
lllaassThis solved my question Re: I'm having touble with Icloud
Mar 24, 2012 4:56 PM (in response to scooberang2)
Do you have more than one Apple ID?
scooberang2
Re: I'm having touble with Iclou
Mar 24, 2012 4:58 PM (in response to lllaass)
no its the same id
not rly an answer now is it -
Having trouble with Airport connecting with Verizon wireless modem.
Having trouble with Airport connecting with Verizon wireless modem. Any ideas?
Haven't asked Verizon. I think it is in my settings for Airport. Need to know proper settings.
-
Having trouble with internet connections using my Apple G5 OSX 10.4.11. Attempts to upgrade FireFox or Safari results in being incompatible with with this system. Tried to locate earlier versions to replace upgraded incompatible software only to find that problems have worsened with crashing results. What should I do short of trashing this wonderful G5 and purchasing a new iMac which I really can't afford?
Chuck's DilemaHi Chuck,
TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/
I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
SeaMonkey seems pretty fast also, with many options...
http://www.seamonkey-project.org/
http://www.seamonkey-project.org/releases/
Might also look into iCab & OmniWeb versions.
Also...
The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
Texas Mac Man's Flash hack/post...
https://discussions.apple.com/thread/3599648?tstart=0
Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
Might be later ones around also... saw 11.3 I think.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html -
Hi everybody,
I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help
ThanksHello:
There was an OS X 10.7 update released a month or so ago that fixed this problem. Run software update.
Barry -
After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. I went through support page and done with "Reset Network settings" too but it doesn't help. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise.
It works fine in LTE network. The problem is with WIFI only.
Thank you.Hey Siddh.s!
Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Ibook G4 having problem with airport connection when using secure network
Hi,
I am currently using a brand new Macbook. I am connected wirelessly to a Comcast network through my Netgear Wireless-N 150 router model WNR 1000. The problem I am having is with the 4 year old ibook when I go to use the airport and connect to my existing network it says the password is incorrect. I spent time troubleshooting this with Netgear and basically we found out that the ibook does connect with the network when there is no security at all.
I erased the hard drive on this ibook to prepare it for sale and it is back to the factory settings. Is there some kind of firmware or drivers I am missing to use the airport as described?? I want to be able to show the buyer that the internet works etc. I also may want to install a few things on the ibook before the sale.
Thanks a mil
Message was edited by: omshantiDid you reset the wireless router to see if by default, it has a different
wireless security then, than however it presently is set up?
The question you pose appears to be marked "answered or solved."
When you reinstall an OS X, the setup asks if you have an existing
wireless connection, or if you will be getting a new one; by default,
the setup will make the existing one the automatic one for OS X.
You should not have to add passwords or other, unless there has
been one set in KeyChain or for the specific wireless base in question.
Tiger 10.4.x does not require you to have a set password for wi-fi,
but you will find several levels of secure options available in OS X.
Not sure why your setup and configuration is problematic. Usually,
a totally new OS X installation is without issue. Sometimes, you
may have to administer a base station via Ethernet cable before
some configurations can use it, but an existing network should be
easy, unless it already has a password security in place.
The Mac will work without a password-protected wi-fi internet source;
often it will 'just work' even when moved to a new environment and
a neighbor's network, if not password protected, will appear among
other options in your vicinity and it will be automatically available.
Not sure if any newer OS X update parts, from the Combo update
files to take Tiger 10.4 to 10.4.11, plus others, would help the Mac
connect better to whatever wireless source of internet available.
I've not had that issue, as you state, except for when someone has
a protected network or passwords in place. Mine has passwords to
keep unauthorized neighbors from easy access; just in case.
In remote locations where few neighbors exist who could access wi-fi
from a lone source, no wireless security settings at all, work just fine.
I've done that; and found a little greater range was gained in signals.
And in the city (largest town in state) a computer I'd set up for use in
a password protected wi-fi network - later worked fine and found the
new owner's own wi-fi network without issues; and I had let the OSX
setup assistant do its job. If a local network is protected by WEP or
WPA2, etc with a password, one would be needed to access it. If not,
then the connection should be automatic.
Good luck & happy computing! -
How do I setup Airport express with ethernet connection to my modem?
Hi there - hoping to get some helpg as I'm having challnges setting up my Airport express via ethernet cable connection directly to my router. It will setup wirelessly no problem, but I occasionally get dropouts when streaming music and I'm hoping to remedy that with a direct cable connection. I know I have to change some settings in my airport utility, but haven't had any luck getting it right.
Here is my setups if it helps:
Airport express, 1st generation, model A1264
Cisco router (provided by my intenet provider)
Macbook Air, running 10.8.5
Airport utility version 6.3.1
Thanks!
PhilUnfortunately, you are getting incorrect advice here. Might be a good idea to start a new post, since the original thread is long out of date.
First, please confirm that you have a compatible Express with the AirPort Extreme. This would be either the current A1392 version.....or the previous A1264 version.
Next, we need to confirm "how' you want to extend, since you do not mention this in your post.
Are you planning to "extend" by connecting the AirPort Express to the AirPort Extreme using a permanent, wired Ethernet connection (highly recommended).....or.....are you trying to "extend" by having the Express try to connect wirelessly to the AirPort Extreme? -
Suggestion for people with Ethernet connection problems
I had problems getting my P965 Platinum to connect to my D-Link router and stay connected. It would connect once then on the next boot it wouldn't. I tried everything and finally, I'm not even sure what made me think of it , I went into the Realtek properties and set it to 100Mbps/Full Duplex instead of 1000Mbps/Full Duplex and that did the trick. I thought I would share this because I know I wasn't the only having problems with it.
Quote from: Maesus on 24-December-06, 05:41:14
65MB/s vs 15MB/s ? hmm... can you try from a very clean OS for the transffer rate? This sounds like some Windows issue...
It is kind of clean OS install (+ windows xp service pack 2) as I just bought the mobo.
I kicked in my old A64 rig, and used same cables I have in my room. (I actually have 2 cables coming from my 1gb switch). Amd rig kicks like 45-50mb/s, while my msi 965p gives only 15-18mb/s for maximum transfer rate.
I quess my fileserver is bottlenecking to 50mb/s as the hdd's arent very fast, and they are quite full. Didint bother to build ramdrive for tesing as this clearly shows my msi's 1gb lan is just slow.
What I found out is that my amd board is able to use both cables on my room @ 1000mbit rate with same performance, where my MSI does connect 1000mbit with other cable, but autonegotiates to 100mbit with another. Also cant force it to use 1000mbit with the cable it is autonegotiating to 100mbit. Strange.
Cables are cat6 speck. Cant try another cables as these are like 20 meters long, so Im not going to get new cable just for fun of testing.
Cables are so called "home made" I bought something like 80 meters of this cable and some connectors and borrowed the rj45 tool from friend.
I have constructed 1gb "intranet" to my apartmet, where every room has 1 cable, exept my own has 2. (got also 3x100mbit outbound connections (one/room), gotta love student apartments ).
quote from w.p.o: "The D-Links meant for home users are not the best quality possible. We were able to break 3 D-links gigabit home switches in a week just with load we got from couple of servers when we did some testing at work."
Actually this D-Link is one of the first 8-port 1GB home switches that can really achieve 8Gbit/s switching speed, where very many switches cant handle such loads and bottlenect to about 2-4gbit. (My student friends had this same box tested in some project @ university network lab).
Cannot ping the box, as it does not have any dedicated IP address for its self, as it is not router, but switch. Pinging trought router doesnt seem to drop packets, maybe i should get some network analyzer tool so I could make bit more traffic on the lines and see if it starts dropping packets then.
Tho might be also some bios problem or sumthing. Seems the p965 neo-f is atleast having lot of problems with all kinds of areas. Like:
PCI cards
Memory compatibility
Lan
Jmicron -
Anyone having trouble with internet connection after downloading mountain lion
After installing Mountain lion to my mid 2011 imac 21" I am having trouble with my internet connection. Anyone else have to deal with this?
Are you on 10.8.2 as ypur profile says? If so, it's worth updating to 10.8.3 which was released last week.
http://support.apple.com/kb/DL1640
Here's a link to some suggestions that helped some users with similar problems in Lion. May still be relevant to MLion. Also check the links within the article:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook
Also when I had wifi problems in the past, creating a new network location resolved it:
http://support.apple.com/kb/HT5289 (under the heading 'Making New Locations'.
I've also seen threads where users with wifi problems have successfully solved them by changing the channel in the router's wifi settings. -
Still having problems with wireless connections with the new lions os
is anyone else still having problems with there wireless connections on the new lions os? What a poor job apple did
No.
-
Airport utility setup with ethernet connections
Can you set up a wireless network and a printer with airport utility with a ethernet connection on a PC?
Can you set up a wireless network and a printer with airport utility with a ethernet connection on a PC?
Yes. The AirPort Utility can access the AirPort or Time Capsule either by wireless or wired connection from a PC. -
MacBook Pro running mountain lion restarts with Ethernet connected
Hi all,
My MacBook Pro (early 2012 15") running Mountain Lion (10.8.1) seems to always restart whenever I connect it to an Ethernet. The wireless works fine and there are no problems. The Ethernet connects then about a minute later my MacBook just restarts no matter what I am doing. I have gotten a new Ethernet cable but the same issue keeps happening. I haven't been able to try another Ethernet port as of yet, I am at school so mine might not work correctly however the Ethernet works fine for my friends PCs.
Does anyone have any ideas that could help me? I would really like to use Ethernet because the wireless here tends to be slow.
Thank you!I realize no one has responded to this but I am still having the issue even after a month. I also now have a panic report if that helps at all.
Interval Since Last Panic Report: 177091 sec
Panics Since Last Report: 9
Anonymous UUID: B6A2F6A3-7497-99BB-BB08-EF35962D2415
Tue Oct 2 16:52:38 2012
panic(cpu 6 caller 0xffffff8025773452): assertion failed: IS_P2ALIGNED(igmp, sizeof (u_int32_t)), file: /SourceCache/xnu/xnu-2050.18.24/bsd/netinet/igmp.c, line: 1607
Backtrace (CPU 6), Frame : Return Address
0xffffff810de9ba50 : 0xffffff802541d626
0xffffff810de9bac0 : 0xffffff8025773452
0xffffff810de9bad0 : 0xffffff80255a3a7a
0xffffff810de9bb40 : 0xffffff80255cb288
0xffffff810de9bb90 : 0xffffff80255cb520
0xffffff810de9bda0 : 0xffffff80255cb0fd
0xffffff810de9bdc0 : 0xffffff802555f27c
0xffffff810de9bdf0 : 0xffffff802554160b
0xffffff810de9be80 : 0xffffff802553f7b1
0xffffff810de9beb0 : 0xffffff80255399dc
0xffffff810de9bf60 : 0xffffff80255404c9
0xffffff810de9bfb0 : 0xffffff80254b26b7
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C54
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000025200000
Kernel text base: 0xffffff8025400000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 7287709952980
last loaded kext at 538384957395: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7fa7781000, size 229376)
last unloaded kext at 356966017730: com.sophos.kext.sav 8.0.4 (addr 0xffffff7fa7777000, size 20480)
loaded kexts:
com.sophos.kext.sav 8.0.4
com.apple.filesystems.smbfs 1.8
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.AMDRadeonAccelerator 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleMuxControl 3.2.11
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOAcceleratorFamily 19.0.26
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.kext.AMD6000Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.1
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.4 GHz, 8 GB, SMC 1.69f3
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353237334448302D4348392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353237334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 6
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
Maybe you are looking for
-
Hi All, Our Landscape: SAP ECC EhP1 SAP BW 7.10 SAP BOBJ XI 3.1 (WebI/Crystal/Xcelsius) SAP BPC NW 7.5 We are new to BPC. We would like to know where do we need to develope the reports on BPC data. Can some one help me on this. If some one have any b
-
Insert records from a single table to two related tables
DB - 10G OS - XP We have many thousands of comma delimited records that we want to insert into a normalised table structure. I have created a test dataset that can be found at the end of this post. I have csv records that look like this; donald, huey
-
Adobe Air will not install. Prior to attempted reinstall, it would not update.
Adobe Air will not install / reinstall. Prior to attempt to reinstall, it would not update. The automatic "update now" button was greyed out, but the "update later" button was active.
-
Template Save As help. Please! ack!
When I apply a template to a page and go to File Save or Ctrl S it directs me to the Templates Box and asks me the name that I want to call the template. I don't want it to be a template, I just want my plain old .cfm file back! So I try File Save As
-
I bought a macbook pro in France, and I wonder if there's a way in order to change a key output. (without changing to U.S keyboard) I'll try to explain: In France the keyboards are azerty not qwerty, I'll get used to it I guess (I knew this before bu