945gcm5 usb 2 does not work

Hello
I also have the same problem and did the same things that are mentioned here in another post, with no success.
I laso have the latest bios update and all the drivers are up to date.
It simply does not recognize USB2.0...
Any sugestions?

hiii
the exacts symptoms is that, does not work the USB2.0. And inte device manager it only appears:
"Controlador Amnfitrião Intel(R) 82801G (ICH7 Family) USB Universal 27C8
27C9
27CA
27CB
I've tried so many OS's, Win XP SP3; Windows Vista; Seven (several versions) Linux Ubuntu, and the same thing:
"this device could be faster" but there are any ports....."
Sugestion, buy another board?

Similar Messages

TS2756 i downloaded the new itunes and now my hotspot via usb does not work on my macbook. (it was before) i have an iphone 5s.

usb hotspot not working with new itunes. i have an iphone 5s. wifi hotspot still works but the macbook says in system preferances under iphone that its not connected or not responding. really annoying

Why not? What happens when trying to use it?
"Will not work" is useless when asking for help. Without specifics, no assistance can be provided.

Usb does not work

nothing plugged into USB ports is recognized - only things appearing under USB are Bluetooth USB Host Controller and IR Receiver
external drive, camera, and phone are not recognized when plugged in (although phone receives power)
any suggestions?
Thanks!
OS X 10.5.8, 2 GHz, 2 GB RAM

Everything is checked except connected servers.
Turns out I had the mistaken impression that anything plugged into USB would show up immediately in the system profiler list, and I see now that it doesn't. Now that I look into it more it seems that the problem may just be in the Lacie USB hard drive I'm trying to connect.
Having said all that, an ipod which is plugged in does connect to itunes, but doesn't show up on the desktop, even though that option is checked.
Thanks again.

MSI E350IA-E45 Wake On USB does not work

I spent hours trying to get the computer to be able to wake from my usb devices. I enabled it in the bios and in the Windows 7 device manager. However, it doesn't work. The motherboard cuts off power to the USB when in S3 sleep mode. Has anybody been able to get Wake From USB working on this board or is it false advertisement?

Mine works with a USB mouse but not Bluetooth mouse.... My BT also has issues on cold start, until I jumped the 5volt pin to the 5v stand by on the power supply

[solved] usb does not work...

Whenever I plug in a usb-device, it always say:
Cannot mount volume.
Error org.freedesktop.DBus.Error.AccessDenied.
A security policy in place prevents this sender from sending this message to
this recipient, see message bus configuration file(rejected message had
interface "org.freedesktop.Hal.Device.Volume" member "Mount" error name "(unset)"
destination "org.freedesktop.Hal")
No idea of what it is saying....
by the way, hotplugging is already enabled and the usb device works well in Windows.
Last edited by horsecool (2009-01-21 10:00:28)

Make /etc/PolicyKit.conf look like this and try again:
<?xml version="1.0" encoding="UTF-8"?> 
<!DOCTYPE pkconfig PUBLIC "-//freedesktop//DTD PolicyKit Configuration 1.0//EN"
"http://hal.freedesktop.org/releases/PolicyKit/1.0/config.dtd">

<config version="0.1">
<match action="org.freedesktop.hal.storage.mount-removable">
<return result="yes"/>
</match>
</config>

Dvd player external does not work

Two weeks ago I bought a HP Stream 11" with no CD/DVD drive; when connecting an external CD/DVD drive via USB does not work and appear a window that says a file is missing; I am kindly asking for your help regarding what has to be done in order to make it work. Please note that the External DVD/CD drive worrks perfect on others Laptops I own
THank you

HI @agalford03 ,
Welcome to the HP Forums!
It is a great place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you have purchased the HP Stream 11 which does not come with an internal CD/DVD and when you connected an external one, you received a message that it was missing a file.
Have you done all your Windows updates?
Have you done a manual check for Windows updates?
Have you ran the HP Support Assistant to check for HP updates?
What file does it say you are missing?
When it is connected, if you check Device Manager does it supply any additional information?
Have you ran the Windows troubleshooter?
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

V570 - USB Ports Not Working

Please forgive me if I posted this in the wrong section! First thread!
Recently, three out of four of my USB ports decided to stop working. The one USB port that works is a USB 2.0 port that is located between the microphone jack and the DVD drive. There is also a eSATA / USB combo port. The eSATA portion works fine, but the USB does not work. At first I suspected that the USB controller was probably starting to fail. I don't understand why all but one USB port functions properly.
I have tried reinstalling the chipset drivers, updated my BIOS, and I tried to see if the ports are recongized in Linux. None of those work. I also checked the ports to make sure there are no bent pins. My warranty period just ended so I was wondering what I can do now. I don't mind opening up the computer, as long as I know what to look for.
Thanks in advance!

hi idaggerpwn,
The USB board must be bad. Try to re-seat the cable from the USB board to the motherboard and check. If this doesn't work, check if the USB ports are somehow disconnected to the PCB. If they are, you will need to hire an a technician with board level soldering skills to reconnect them or you can contact lenovo for service to replace this part. (fees may apply)
Check page 78 (see #10) of the hardware maintenance manual (HMM) for the USB board location. To access the USB board see page 53 of the HMM.
Best regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My Garageband does not work with Symphonic Orechestra or USB Boombox

I have two Macs: the main one is an iMac with Intel Core Duo 2 GHz, 1.5 GB RAm and 250 Gb HD, with OSX 10.4.8, and all the latest software upgrades as I download them as soon as they are available. The secondary Mac is a normal iBook G4-800 with 640 Mb RAM and not always the most recent plugins, but since a few days also the latest ones.
I premit I do use GarageBand to produce professional level music and in time I bought several new music features. I am a Mac user since ever and I never (I say again NEVER) uploaded any software (or loop) who wasn't regularly licenced and usually bought from Applestore itself.
NOW THE PROBLEM:
Since I sold my old iMac G5 and implemented my CoreDuo I experienced a problem with Garageband: the external plugins for Garageband (such as the old and excellent "East West Quantum Lightning Symphonic Orchestra" but also the very recent USB "Classic Boombox" and "Ethnic Boombox" are not working. Those software instruments does appear correctly in the menus, but does not work. When I try to select them it appear this sentence (in italian, I will try to translate it approximateively):
"the plugin is not available. To add this loop using the same sound you heard in the browser loop, press the Option key and drag contemporary the loop in a new track"
This it happens all the times I try to set an instrument from EastWest or USB plugins from my iMac. As to make a confrontation, I installed the same softwares on my iBook and they work perfectly (with the only exception that I can't work from the iBook since is far too slow for me to use it with some profit).
Someone an help me or explain if there is anything I can do to fix my problem?
East West said the pluging should work (and to be honest it works correctly on the G4 as it did work properly with the G5). I own the USB software just since a few days, so I didn't ask them yet, but since is not just them, I guess is something else and do not know what may be the cause.
Some of you do have some hint or idea?

Yep, I understand...
This is the final news I needed to get to complete my answer... I confronted myself the italian store and the US one and in the US one I didn't find this product...
As for the NI software, was so good that I just bought back my good "old" iMac G5 and will exchange it with this my Intel Mac. The G5 2 Ghz was good, performing as this new Intel (at times I even got the impression was more performing, but I believe is just an impression) and surely didn't have so many 3rd parties problems.
Meanwhile I filled every forum of NI and USB with my questions about the compatibility... and maybe I will be back to an Intel Mac when all would be OK, I'm not in a hurry!
By the way I had a listen to your work: GREAT!
You may hear a sketch version of something we did work on with the NI piano and choir sounds, while the alto sax is played live and the other instruments are from Apple or real keys (yes, we mix a lot of things):
http://www.garageband.com/song?
while here is a track where we did use both the Orchestral sounds of Garageband (and some of it's loops, mixed with some good old programming) together with some NI sound:
http://www.garageband.com/song?
We do not often use orchestra if not as here and there (other than in some work as this last one, but is not so frequent). Hope you may like our little works!

One USB port does not work with external Disk or USB key

Hello,
Back to my iMAC there is 3 USB port. The second one - in the middle - does not work pluging an external Disk, an USB key or an iPOD nano. However it works well connecting a Wacom tablet.
Is there an explanation to this behaviour ?
More the keyboard is plugded on USB port 1 and the mouse on the keyboard. Time to time - especially at reboot - I have to unplugged the mouse and plugged again it in order it works.
In advance thank you for your answers
Regards

Since it does not work for three different devices, I will assume it is not something simple like a faulty USB cable. Since it does work for one device, I will also assume that the port is (at least partially) working.
As a test to narrow down the cause, I would try restarting from your Mac OS X installation disc (insert disc and restart with the C key held down).
At the first Installer screen (after language selection), go up the menu bar. Under Utilities, select to run Disk Utility. Now, connect the USB drive into that center port. Does it appear in the Disk Utility sidebar?
Please post back the result...

Apple USB keyboard does not work with one internal usb port

Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
Guillaume

I'm facing the same problem, found any solutions ?

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

External USB keyboard does not work with T60 after BIOS upgrade

External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
It does the same with or without the docking station.
Anyone else bumped into this problem yet?
Has someone found any fixes for this?
t

Hi and welcome the forum!
Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Bluetooth USB Dongle does not work

I have this generic looking USB dongle (forgot the brand) that I use with my eMachines e725 laptop. It worked fine with Linux Mint 9 KDE 64bit that I had to use for the past 1.5 years. The moment I plugged the dongle in, it was instantly detected and the bluetooth icon turned active in the system tray. However it does not work with my ArchLinux 64bit install with KDE4.6 (updated to latest packages). Due to issues with the new Kernel 2.6.39 series, I am using the LTS kernel.
lsusb:
Bus 003 Device 009: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
tail -f /var/log/messages.log
Jul 10 17:56:26 localhost kernel: [11565.480026] usb 3-1: new full speed USB device using uhci_hcd and address 9
Jul 10 17:56:26 localhost kernel: [11565.728190] usb 3-1: configuration #1 chosen from 1 choice
I've installed bluez and bluedevil. In KDE System Settings, when I go to the bluetooth options, it says no bluetooth adapters have been found.
Last edited by MetalheadGautham (2011-07-10 13:28:51)

Have you read the Bluetooth wiki page?
Seems to me you didn't run the relevant daemon.
Also, your thread title should include 'bluetooth' - 'USB dongle' on its own is too generic.
Last edited by tomk (2011-07-10 13:12:28)

Back USB port does not work

I noticed that one USB port(All other ports appear to be working)in the back of my Mac Pro does not work.
Aside from taking my Mac Pro in for a repair, is there any other way to fix this problem?

You can always try resetting PRAM and NVRAM…
http://docs.info.apple.com/article.html?artnum=2238
… and/or the System Management Controller…
http://docs.info.apple.com/article.html?artnum=304123
… otherwise no. You will need to take it in for repair and most likely a logic board replacement.

Added USB Card does not work.

I just added a 5 Port (4 external and 1 internal) USB PCIe Card to my mac pro. The MAC see the card but anything I plug in does not work. The items I plug in work on the other Apple USB Busses but not on the new card. This is actually my second card for this (I thought the first one was bad) but now I am beginning to think the MAC PRO is bad. I have plugged the card into every slot on the motherboard and they all are the same. card is recognized but anything I plug into the card is not...
Does anyone have any suggestions?

Hi Bruce Leingang;
Everything I found on the web about that card say that it only works on Windows PC.
Allan

945gcm5 usb 2 does not work

Similar Messages

Maybe you are looking for