99 or 100% when it says Premiere Pro has stopped working and needs to close. What's going on?

I am using the premiere pro trial at the moment and have been trying to render a video for a solid week now. My computer is far more powerful then the recommended specs and yet it still takes 2 hours to attempt to export a 3 minute video (that isn't even heavily edited) and not only that but it will get to 99 or 100% when it says Premiere Pro has stopped working and needs to close. I have used earlier versions of the product before and never had such problems, even my 2 year old laptop could breeze exporting. What's going on?

Thanks, I'm a bit new to asking for help!
Version : Premiere Pro CC 2014.2 (8.2)
It is up to date
I'm using Windows 8.1 build 9600
My sources are contained in .mov, .mp4 and .png. The codec I'm trying to use is H.264
After I set the project to export I got this error message every time it gets to either '99' or '100%' completed. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
I have never had such a problem with the program which makes me think it might have something to do with a recent update.
No other notable software was running during the export.
I don't have any third-party effects or codecs installed.
I have 64 bit OS and processor, Intel i5 - 4670K quad core clocked at 3.40 GHz. 12 GB of RAM. And a GTX 770 with 2GB of video RAM.
Unless it was installed in the trial, I do not have the Mercury Playback Engine.
And finally, it can be noticeably choppy during the preview when it gets to the part I don't have rendered but is fine again for a bit if I replay those parts. A part from being a bit slower then usual, I didn't actually run into a major problem until I started exporting.
Thank you for the help! Any suggestions?

Similar Messages

  • When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

    When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

    The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
    Any solution?? Need help, please!!
    Macbook pro 13 i7
    Iphone 4
    Ipad 2
    Thanks!!!

  • WHENEVER i LOAD ITUNES i GET A POP UP STATING THAT iTUNES HAS STOPPED WORKING AND NEEDS TO CLOSE. wHEN wINDOWS FINDS THE PROBLEM, THEY WILL NOTIFY ME. tHIS HAPPENS ALL THE TIME. i UNINSTALLED AND INSTALLED TWICE AND IT STILL HAPPENS. HOW DO I CORRRECT

    I keep getting a pop up on Itunes when I try to add a file saying that ITUNES HAS STOPPED WORKING AN NEEDS TO CLOSE. W     indows will notify me when corrected. iuninstalled and reinstalled 3 times to no avail. how do i fix?

    a further message  box states that Data Execution Prevention has closed the program.
    Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

  • Premiere pro has stopped working and must close

    Premier pro has been installed through CC and will not launch. 'has stopped working and must close'
    drivers up to date
    have signed in and out of CC
    have uninstalled and re-installed all premiere pro content including cache
    have changed the compatibility mode and tried using as admin
    still the program will not launch.

    >drivers up to date
    Did you verify that at the vendor site?
    For Windows, do NOT rely on Windows Update to have current driver information
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    Do you have dual graphics adapters?
    Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
    IF YES, read below
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

  • Indesign cs6 has stopped working and needs to close in windows 8

    We have Adobe InDesign CS6 installed on 2 different computers and on both computers it frequently crashes saying "cs6 has stopped working" and closes the application. Restarting it ok for a while and then the same thing happens. We have uninstalled and reinstalled to no avail, no other Adobe products are installed.

    Try trashing the prefs. See Replace Your Preferences

  • "Power Manager has stopped working and needs to close"

    I have been getting this message which I think started when I installed my Vista Service Pack 2.  I have updated everything and my Bios is up to date.  Does anybody have a solution to this error?

    Try trashing the prefs. See Replace Your Preferences

  • After a few minutes my Photoshop CC dispays this mesage PHOTOSHOP CC HAS STOPPED WORKING AND NEEDS TO CLOSE. I have updated the graphics driver and restarted several times to no avail. This has happened before but I can't seem to fix it. I have an HP Pavi

    Can anyone help please?

    You need to look at what is the cause what module is the fault in.

  • Premiere Pro has stopped working

    Premiere Pro has been working fine everyday since Christmas.
    I have made no changes to anything on the Computer, but suddenly this evening I get message every time I try to enter Premire Pro.  that Premiere Pro has stopped working and windows is checking for solution, and I am unable to open any of my projects.
    I have checked all drivers and gedt messages they are all working correctly.
    David Wells

    Thank you John for your help
    I have a AMD Radeon HD 7570 Driver Version 13.152.0.0
    I had already been to their site and run AMD Driver AutoDetect without any luck
    I have been  using Adobe Creative Cloud for the year since I first purchased this computer, and every programme except Premiere Pro is working OK.  I had a similar problem a few months ago after I upgraded from Windows 8 to Windows 8.1 and I then uninstalled Premiere Pro,  and deleted the AMD Beta Drivers which I had installed from AMD Catalyst following a recommendation on the Forum, and when I reloaded Premiere Pro everything worked OK  without the Beta Drivers, .and although I still received messages Premiere Pro has stopped working some times, until yesterday I had always opened  Premiere Pro after a couple of tries.  
    I was going to uninstall Premiere Pro this morning, but  following your E Mail I went back to AMD and thought I would try downloading Beta Drivers from AMD Catalyst and  Premiere Pro opened first time of asking.
    The joys of Computers, Lets hope it keeps working now
    Thanks a lot
    David

  • 'Premiere Pro has stopped working' during file import

    I am on the trial of PP and as soon as i attempt to import a clip, i get a message that Premiere Pro has stopped working and it closes the program.
    Here is the message:
    Files that help describe the problem:
      C:\Users\jchristman.DRACE\AppData\Local\Temp\WER3D30.tmp.WERInternalMetadata.xml
      C:\Users\jchristman.DRACE\AppData\Local\Temp\WER567B.tmp.appcompat.txt
      C:\Users\jchristman.DRACE\AppData\Local\Temp\WER5718.tmp.mdmp

    Hi,
    What are the technical Specifications of your computer?
    What is the exact version of Premiere Pro that you are using?
    Go to File-Project Settings-General and change the Video Renderer to Software Only Mode.
    Then Import the file this might help.
    Thank You
    Arjun

  • Premiere Pro has stopped working. Windows can't open it

    Hi
    When I lauch Premiere Pro, I get this error message: "Premiere Pro has stopped working" Then I get this one: " A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
    I even uninstalled and re-install the program. but I get the same error. I'm sure this must be an easy-fix for somebody out there. Please help.

    There is much more help in that forum http://forums.adobe.com/community/premiere?view=discussions
    When you go to the program forum for help, you need to provide a LOT more information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
    IF YES, read below
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
    IF NO, read below
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

  • Updated to Oct 2014 version of photoshop CC. since that time cannot save ANY work.  I can work on files but when I hit 'save as" every time it says "photoshop has quit working and needs to close."

    Updated to Oct 2014 version of photoshop CC. since that time cannot save ANY work.  I can work on files but when I hit 'save as" every time it says "photoshop has quit working and needs to close." Need solution now.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • My photoshop crashes when i double click, it says that it has stopped working and that i should check online for a resolution, anyone got anything to help me

    my photoshop crashes when i double click, it says that it has stopped working and that i should check online for a resolution, anyone got anything to help me

    i found out my prob!
    here is what you do.
    go to the "system preferences" on your dock.
    click "software updates".
    click "installed software"
    if it shows something about a recent update about "EFI UPDATE, FIRMWARE, THUNDERBOLT" or anything like that, exit out of it.
    go to mail.
    click "mail" at the top.
    click "preferences...".
    find the account you are having trouble with, once you do, make sure its highlighted, then click the "-" at the bottom of the window (this will only effect that mail account, it will not effect your ical weather or not its synced thought that email account)
    hit the "+" (right next to the "-") and add your accout back!
    its something with that update that effected mail, i hope this works out for you, if not reply back

  • My iTunes isn't playing a movie, how do I fix it? I've rented a movie from iTunes on my PC but every time i try to play it, a notification appears saying that iTunes has stopped working and it closes the program.

    I've rented a movie from iTunes on my PC but every time i try to play it, a notification appears saying that iTunes has stopped working and it closes the program...how do I fix this???

    Try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • I just updated iTunes on my dell and now when I try to go to the store I get an error message that iTunes has stopped working and the program closes. Ideas?

    I just updated iTunes on my dell and now when I try to go to the store I get an error message that iTunes has stopped working and the program closes. Ideas?

    I have also retarted twice...

  • HT1349 I have icloud on my pc with windows vista.  Recently, upon startup I receive an error that says applephotostream.exe has stopped working.  Windows will close this problem . . . any suggestions.  I tried to download the control panel again. no luck

    I have icloud on my pc with windows vista.  recently, upon startup I get a message that says applephotostream.exe has stopped working.  Windows will close this program  . . . I tried re-installing the icloud control panel, etc.  to no avail.  any leads?

    Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?

Maybe you are looking for