A fatal error occurred during a windows server backup snap-in operation;

Unable to get windows server backup to work, I believe it was running fine not too long ago.
getting the following errors in the event log;
Faulting application name: wbengine.exe, version: 6.3.9600.17415, time stamp: 0x54504543
Faulting module name: wbengine.exe, version: 6.3.9600.17415, time stamp: 0x54504543
Exception code: 0xc0000005
Fault offset: 0x000000000011e4d7
Faulting process id: 0x1a20
Faulting application start time: 0x01d01a1b546c5049
Faulting application path: C:\Windows\system32\wbengine.exe
Faulting module path: C:\Windows\system32\wbengine.exe
Report Id: 99e58796-860e-11e4-80c4-40167e73010e
Faulting package full name:
Faulting package-relative application ID:
and
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: wbengine.exe
P2: 6.3.9600.17415
P3: 54504543
P4: wbengine.exe
P5: 6.3.9600.17415
P6: 54504543
P7: c0000005
P8: 000000000011e4d7
P9:
P10:
Attached files:
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_wbengine.exe_a2f5333556c4387ec0eb41803df32b5ef88b1de_6e4602a0_1b3ef3fb
Analysis symbol:
Rechecking for solution: 0
Report Id: 8a7a7549-860e-11e4-80c4-40167e73010e
Report Status: 0
Hashed bucket:

Hi,
It seems that there is an error accessing the catalog. You could run the "wbadmin delete catalog" to delete the catalog to resolve the issue.
For more detailed information, please refer to the thread below:
Windows Server 2k8 Backup Errors
https://social.technet.microsoft.com/Forums/windowsserver/en-US/9051f767-2e25-44f9-a4cf-d49f75513da6/windows-server-2k8-backup-errors?forum=winservergen
Please note: The command "wbadmin delete catalog" will remove all backups existed on your server.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

"fatal error occurred during installation" pops up after downloading itunes

i have recently purchased a new iPod nano, so (on my windows vista acer laptop - which i had previously had itunes on before - my old ipod had broken ages ago so i uninstalled it and everything) i started to download itunes. it had done so with no problems at all. but when it went to install (it didn't do it automatically so i had to click on the icon) the "fatal error occurred during installation" came up without specifying what error. i have tried uninstalling and reinstalling, restarting my laptop etc but nothing has worked. the same message occurs all the time.
can you help me solve this problem as i would like to listen to my music when i go out =[
please and thanks

I have the same problem. Ipod touch purchased for christmas and I cannot load itunes without this fatal error always occuring. Have tried changing access and priveledge controls all to no avail......can anyone help?

"A fatal error occurred during the XML merging process" - issue

All,
We have now been able to by pass an initial error message (Failed to add BusinessObjects XI 3.1 SharePoint 2007 PIK to SharePoint) during the PIK installation, but unfortunately another one is popping up now.
System specs:
- Sharepoint 2007 SP2
- BOE XI 3.1 .NET SDK
- BusinessObjects XI 3.1 SharePoint 2007 Portal Integration Kit
The switch u201Csp2007=1u201D behind the setup.exe in a command prompt has to be used to overcome the initial error message.
The new error message is "A fatal error occurred during the XML merging processu201D.
If you would have any pointers or tips how to solve this, I would very much appreciate your help.
Regards, Janne

All,
We have now been able to by pass an initial error message (Failed to add BusinessObjects XI 3.1 SharePoint 2007 PIK to SharePoint) during the PIK installation, but unfortunately another one is popping up now.
System specs:
- Sharepoint 2007 SP2
- BOE XI 3.1 .NET SDK
- BusinessObjects XI 3.1 SharePoint 2007 Portal Integration Kit
The switch u201Csp2007=1u201D behind the setup.exe in a command prompt has to be used to overcome the initial error message.
The new error message is "A fatal error occurred during the XML merging processu201D.
If you would have any pointers or tips how to solve this, I would very much appreciate your help.
Regards, Janne

FATAL ERROR occurred during installation

Trying to install a HP Officejet 4500 G510g-m onto a HP Desktop PC with Windows Vista.
Error message reads:
Fatal error message during installation
An error occurred during installation of assembly
'Microsoft.vc90.MFC,version="9.0.21022.8",publickeytaken=1fc8b3b9 a1e18e3b",processor architecture="x86",type="win32".'
"Fatal error"
"MSI.netdevicemanager40"
Error logs reads:
+0000000000000958722048/s/Now launching=x:/hpzmsi01.exe -m netdevicemanager40 -I xxx -f 'x:/hpwwins26.dat" - validate No at" -validate No
X:/Network64.msi failed with return code 1603
When searching for the code 1603, I found a trouble shooting number (c02455020)
When I run the program regsvr32 Atl.dll it came up with
DII Register Server failed with error code 0x2002801c
But the com product was already registered, the computer has been re-started 12 times. So I cannot understand why I cannot install the complete printer, why is telling me that only the basics can be installed. I purchased and ll-in-one because I need it all not just a printer.
Be so kind to enlighten me.
My father's patience has ended, and before he packs it back into the box, I am willing to troubleshoot it with you.
Please help.
Thank you.

Hello Techiizz
Try the following article. It covers the Fatal Error 1603 and should help resolve your problem.
MSI Fatal Error 1603
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

"Error 1603. A fatal error occurred during installation"

Ive been trying to install Adobe Photoshop CS4 trial for the past 3 days.
The only reason I want to try it is because of its ability to create textures directly on models.
But whenever I try to install, I get this error
"Adobe Drive CS4
Error:
Error 1603. Fatal error during installation."
Dispite it not saying that Adobe Photoshop CS4 having an error, I still get this screen:
http://content.screencast.com/users/Pyromaniac1444/folders/Jing/media/a281841a-bf3b-452a-9 bea-45418ba662be/2009-08-01_1132.png
I have read [And done] this forum's instructions fully and it still will not install.
http://forums.adobe.com/thread/373577
I appreciate any help, here is my systems specs:
http://content.screencast.com/users/Pyromaniac1444/folders/Jing/media/52112bb6-5e85-4347-b d01-0bc0c5939a6d/2009-08-01_1753.png
I also have some hardcore gaming video memory, but I don't think thats relevent here. :3

Disable any anti virus running on Windows 7. Disable windows defender.
Go into start and type in services, click on services, and look for Windows Installer. Turn it from Manual to Auto and hit apply, then start the service and hit ok. close services.
Make sure you run the PS CS4 installer as Admin!!
No need to turn off UAC or the firewall.
Before you run CS4 right click and select properties and run it as Admin.
When you are ready to run CS4 for the first time make sure your connect to the internet. Also update CS4 to 11.0.1 update. Also ensure your video card drivers are up to date

HP Photosmart c6280 fatal error 1606 during installation - Windows Vista 64 bit

Hi! I have a HP Photosmart c6280 printer that we have had for a few years. We moved it and configured it for USB use instead of wired via ethernet through the network. It worked great, but now my wife's project is done. Now we have moved it back and wired it through the ehternet cable into the router.
It will print, but the HP solution center doesn't recognize it and it will not scan or do any othe functions. I have done a complete UNINSTALL and reinstall multiple times.
After installation I checked the event viewer and every install fatal error is a "1606" and it states the following:
Product: PS_AIO_02_ProductContext -- Error 1606. Could not access network location %APPDATA%\.
I am ata complete loss as to how to resolve this......someone please help!
Sheriff

I would suggest doing a L3 uninstall on the printer.
1. Run disk cleanup on your computer- you can pass this step if you want
2.Download and run the software and drivers below.=
3. Once the download is done extracting, cancel the download.
4.. Press the Windows key + R on the keyboard to bring up the run menu.
5. Type %temp% in the run field and click OK.
6. Look for, and open the folder starting with 7z (Example: 7zS2356)
7. Open folder Util
8. Open folder CCC
9. Run the uninstall_ L4.bat
10. When the uninstall has completed restart the computer
11. Run Disk cleanup from Accessories\ System Tools
12. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
13. Use this tool to clean the system and registry. Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility. This step is optional. You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
14. Download and run the software and drivers below.=
15. Run the download to reinstall the printer
Note: Before making any changes to the registry make sure and make a backup copy.
Back up registry:
Type regedit in the search programs and files
Click file, and then export
Type file name, and chose save to location
TAKE OUT ONLY THESE KEYS/FOLDERS!!!
 HKEY_CURRENT_USER > Printers>DevModes2 > * c6280 *
- (delete printer name from window list; may need to check DevMode and Settings folders, too)
 HKEY_LOCAL_MACHINE > software> Hewlett Packard > Digital Imaging folder
- (delete ENTIRE folder – IF computer NOT an HP, delete the ENTIRE HEWLETT PACKARD folder)
 HKEY_CURRENT_CONFIG> System > CurrentControlSet > Control > Print > Printers > * c6280 * - (delete any HP printer folders and the folders of any printer not in use)
After this please restart the desktop, and then install the Download and run the software and drivers below. (select your OS)
Just a note - if you participate in this thread I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

Acrobat fatal error 1603: a fatal error occurred during installation

I am running Windows 7 Ultimate 64 bit with all the latest updates.
I have Acrobat XI standard installed. The updates fail.
I have tried everything:
Uninstalled Acrobat
Run the Acrobat cleaner
Removed all temporary files
Installed the latest .net software
Reinstalled as the administrator
Nothing seems to make a difference
Any and all assistance appreciated.

Thanks for getting back to me. I have done all of this. I have run the cleaner tool and I have tried downloading and installing, even doing it release by release and it still doesn’t work, it still gives me the same error. I have Acrobat stand alone, although I do have both reader, Adobe Production Premium CS6 and a couple of other things installed. So I didn’t uninstall everything from Adobe, I just ran the standalone uninstaller for Acrobat and Reader. But I have uninstalled, cleaned, removed temporary files, installed the latest .net version, and installed as the administrator. None of this has helped. Do you have any other suggestions?
Thanks,
Dave

A fatal error with Windows Server Backup

Hey,
I'm trying to backup my Windows Server 2008 R2 (physical server). Windows Server Backup tool crashes when I start to start it. It gives me error "A fatal error occurred during a Windows Server Backup snap-in (Wbadmin.msc) operation. Error details: The
Windows Server Backup service has stopped.
Errors I get to event viewer:
ASR Warning: Failed to collect disk information for ASR Backup. Reason: Unable to obtain disk information for device 14 (Win32 error code 0x1).
ASR Warning: Failed to collect disk information for ASR Backup. Reason: Unable to obtain disk information for device 10 (Win32 error code 0x1).
ASR Warning: Failed to collect disk information for ASR Backup. Reason: Unable to obtain disk information for device 3 (Win32 error code 0x1).
ASR Warning: Failed to collect disk information for ASR Backup. Reason: Unable to obtain disk information for device 1 (Win32 error code 0x1).
The following process dump file was generated:
C:\Program Files\DebugDiag\Logs\Crash rule for all instances of wbengine.exe\wbengine__PID__9716__Date__07_04_2014__Time_03_08_24PM__911__First chance exception 0XE06D7363.dmp
These devices (disks) that are showing in warnings arent initialized from Disk Management. If I open Disk Management, it always pops up prompt to initialize disks. I havent initialized these disks cause I already have them in use, but Windows regonizes those
disks twice cause I'm using multipath. I shouldnt initialize one physical disk twice.
I think seeing these disks twice is crashing my Windows Server Backup. Is there a way to disable specific disks for Windows Server Backup? Can I disable those disks somehow, so Windows Server Backup wouldnt see those disks twice? Or can I somehow tell Windows
that its seeing my disks twice, and there is actually only one disk instead of two.
Greetings,
Niko Turunen
Finland

Hi,
How did you configure the disks by using multipath? The ASR component is a system-critical component that is reported by the ASR writer. Every fixed disk on the computer is exposed as a component in ASR. During backup, the requester should include all fixed
disks.
For more detailed information, please refer to the articles below:
Using VSS Automated System Recovery for Disaster Recovery
http://technet.microsoft.com/en-ca/aa384630(v=vs.80).aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Server Backup - wbengine.exe Crashing

Hi,
When running either a scheduled back or a once off backup, I receive the following error around 30 seconds into the backup:
"The Windows Server Backup service has stopped"
"A fatal error occurred during a Windows Server Backup snap-in (Wbadmin.msc) operation. Error details: The Windows server Backup service has stopped"
In event viewer the following two events were logged:
Faulting application name: wbengine.exe, version: 6.1.7601.17514, time stamp: 0x4ce79951
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000374
Fault offset: 0x00000000000c4102
Faulting process id: 0x13e8
Faulting application start time: 0x01cfa9f0936b235a
Faulting application path: C:\Windows\system32\wbengine.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: e99a55c8-15e4-11e4-9ab5-a01d48c77640
The Block Level Backup Engine Service service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 120000 milliseconds: Restart the service.
I have tired restarting the Block Level Backup Engine Service service, deleting the backup catalogue, removing and re adding Window Server Backup feature. None of these fixed the problem.
I used Debug Diagnostic Tool v2.0 and capturing all instances of wbengine.exe process:
Loading control script C:\Program Files\DebugDiag\scripts\CrashRule_Process_wbengine.exe.vbs
DumpPath set to C:\Users\administrator\Desktop\wbengineLogs
[8/20/2014 9:23:48 AM] Process created. BaseModule - C:\Windows\system32\wbengine.exe. BaseThread System ID - System ID: 7940
[8/20/2014 9:23:48 AM] C:\Windows\SYSTEM32\ntdll.dll loaded at 0x77780000
[8/20/2014 9:23:48 AM] Thread created. New thread system id - System ID: 1912
[8/20/2014 9:23:48 AM] Thread created. New thread system id - System ID: 7756
[8/20/2014 9:23:48 AM] Thread created. New thread system id - System ID: 4920
[8/20/2014 9:23:48 AM] Thread created. New thread system id - System ID: 6964
[8/20/2014 9:23:48 AM] Thread created. New thread system id - System ID: 6100
[8/20/2014 9:23:48 AM] Thread created. New thread system id - System ID: 6524
[8/20/2014 9:23:48 AM] Thread created. New thread system id - System ID: 6824
[8/20/2014 9:23:48 AM] C:\Windows\system32\kernel32.dll loaded at 0x77560000
[8/20/2014 9:23:48 AM] C:\Windows\system32\KERNELBASE.dll loaded at 0xfd5e0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\ADVAPI32.dll loaded at 0xfe030000
[8/20/2014 9:23:48 AM] C:\Windows\system32\msvcrt.dll loaded at 0xff5d0000
[8/20/2014 9:23:48 AM] C:\Windows\SYSTEM32\sechost.dll loaded at 0xff530000
[8/20/2014 9:23:48 AM] C:\Windows\system32\RPCRT4.dll loaded at 0xfeed0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\USER32.dll loaded at 0x77680000
[8/20/2014 9:23:48 AM] C:\Windows\system32\GDI32.dll loaded at 0xffa20000
[8/20/2014 9:23:48 AM] C:\Windows\system32\LPK.dll loaded at 0xff6c0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\USP10.dll loaded at 0xff130000
[8/20/2014 9:23:48 AM] C:\Windows\system32\ole32.dll loaded at 0xff320000
[8/20/2014 9:23:48 AM] C:\Windows\system32\OLEAUT32.dll loaded at 0xfdf40000
[8/20/2014 9:23:48 AM] C:\Windows\system32\VSSAPI.DLL loaded at 0xfc1e0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\ATL.DLL loaded at 0xfc1c0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\VssTrace.DLL loaded at 0xfc1a0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\SETUPAPI.dll loaded at 0xff6d0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\CFGMGR32.dll loaded at 0xfd910000
[8/20/2014 9:23:48 AM] C:\Windows\system32\DEVOBJ.dll loaded at 0xfd8f0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\NETAPI32.dll loaded at 0xfa190000
[8/20/2014 9:23:48 AM] C:\Windows\system32\netutils.dll loaded at 0xfc9f0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\srvcli.dll loaded at 0xfd130000
[8/20/2014 9:23:48 AM] C:\Windows\system32\wkscli.dll loaded at 0xfa170000
[8/20/2014 9:23:48 AM] C:\Windows\system32\XmlLite.dll loaded at 0xfa9e0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\bcrypt.dll loaded at 0xfcf10000
[8/20/2014 9:23:48 AM] C:\Windows\system32\VirtDisk.dll loaded at 0xf5740000
[8/20/2014 9:23:48 AM] C:\Windows\system32\FLTLIB.DLL loaded at 0xf8de0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\CLUSAPI.dll loaded at 0xf9c60000
[8/20/2014 9:23:48 AM] C:\Windows\system32\cryptdll.dll loaded at 0xfd040000
[8/20/2014 9:23:48 AM] C:\Windows\system32\IMM32.DLL loaded at 0xfe110000
[8/20/2014 9:23:48 AM] C:\Windows\system32\MSCTF.dll loaded at 0xff020000
[8/20/2014 9:23:48 AM] C:\Windows\system32\CRYPTBASE.dll loaded at 0xfd420000
[8/20/2014 9:23:48 AM] C:\Windows\system32\bcryptprimitives.dll loaded at 0xfca00000
[8/20/2014 9:23:48 AM] C:\Windows\system32\cscapi.dll loaded at 0xf9bd0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\CLBCatQ.DLL loaded at 0xfdc70000
[8/20/2014 9:23:48 AM] C:\Windows\system32\CRYPTSP.dll loaded at 0xfcdc0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\rsaenh.dll loaded at 0xfcac0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\RpcRtRemote.dll loaded at 0xfd510000
[8/20/2014 9:23:48 AM] C:\Windows\system32\blb_ps.dll loaded at 0xf7520000
[8/20/2014 9:23:48 AM] C:\Windows\System32\vds_ps.dll loaded at 0xf8310000
[8/20/2014 9:23:48 AM] C:\Windows\system32\WINTRUST.dll loaded at 0xfd720000
[8/20/2014 9:23:48 AM] C:\Windows\system32\CRYPT32.dll loaded at 0xfd760000
[8/20/2014 9:23:48 AM] C:\Windows\system32\MSASN1.dll loaded at 0xfd5d0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\vss_ps.dll loaded at 0xfa2f0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\taskschd.dll loaded at 0xf4b20000
[8/20/2014 9:23:48 AM] C:\Windows\system32\SspiCli.dll loaded at 0xfd390000
[8/20/2014 9:23:48 AM] C:\Windows\system32\spp.dll loaded at 0xeec40000
[8/20/2014 9:23:48 AM] C:\Windows\system32\dsrole.dll loaded at 0xfb630000
[8/20/2014 9:23:48 AM] C:\Windows\System32\msxml3.dll loaded at 0xf89b0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\SHLWAPI.dll loaded at 0xff200000
[8/20/2014 9:23:48 AM] C:\Windows\System32\ES.DLL loaded at 0xfb5b0000
[8/20/2014 9:23:48 AM] C:\Windows\system32\SXS.DLL loaded at 0xfd430000
[8/20/2014 9:23:48 AM] C:\Windows\system32\PROPSYS.dll loaded at 0xfad60000
[8/20/2014 9:23:48 AM] C:\Windows\system32\samcli.dll loaded at 0xfa670000
[8/20/2014 9:23:48 AM] C:\Windows\system32\SAMLIB.dll loaded at 0xfa650000
[8/20/2014 9:23:48 AM] C:\Windows\System32\msxml6.dll loaded at 0xf6ab0000
[8/20/2014 9:23:48 AM] Thread created. New thread system id - System ID: 7428
[8/20/2014 9:23:48 AM] Initializing control script
[8/20/2014 9:23:48 AM] Clearing any existing breakpoints
[8/20/2014 9:23:48 AM]
[8/20/2014 9:23:48 AM] Current Breakpoint List(BL)
[8/20/2014 9:23:49 AM] Thread exited. Exiting thread system id - System ID: 7428. Exit code - 0x00000000
[8/20/2014 9:23:54 AM] Thread created. New thread system id - System ID: 5848
[8/20/2014 9:23:55 AM] C:\Windows\system32\blbres.dll loaded at 0x73050000
[8/20/2014 9:23:55 AM] C:\Windows\system32\blbres.dll Unloaded from 0x73050000
[8/20/2014 9:23:55 AM] C:\Windows\system32\blbres.dll loaded at 0x73050000
[8/20/2014 9:23:55 AM] C:\Windows\system32\blbres.dll Unloaded from 0x73050000
[8/20/2014 9:23:55 AM] C:\Windows\system32\blbres.dll loaded at 0x73050000
[8/20/2014 9:23:55 AM] C:\Windows\system32\blbres.dll Unloaded from 0x73050000
[8/20/2014 9:23:55 AM] C:\Windows\system32\blbres.dll loaded at 0x73050000
[8/20/2014 9:23:55 AM] C:\Windows\system32\blbres.dll Unloaded from 0x73050000
[8/20/2014 9:23:55 AM] C:\Windows\system32\blbres.dll loaded at 0x73050000
[8/20/2014 9:23:55 AM] C:\Windows\system32\blbres.dll Unloaded from 0x73050000
[8/20/2014 9:23:55 AM] C:\Windows\system32\blbres.dll loaded at 0x73050000
[8/20/2014 9:23:55 AM] C:\Windows\system32\blbres.dll Unloaded from 0x73050000
[8/20/2014 9:23:55 AM] Thread created. New thread system id - System ID: 7188
[8/20/2014 9:24:02 AM] Thread created. New thread system id - System ID: 6160
[8/20/2014 9:24:02 AM] Thread created. New thread system id - System ID: 7640
[8/20/2014 9:24:02 AM] Thread created. New thread system id - System ID: 8148
[8/20/2014 9:24:02 AM] Thread created. New thread system id - System ID: 5348
[8/20/2014 9:24:02 AM] Thread created. New thread system id - System ID: 2964
[8/20/2014 9:24:02 AM] Thread created. New thread system id - System ID: 5320
[8/20/2014 9:24:02 AM] Thread created. New thread system id - System ID: 4164
[8/20/2014 9:24:02 AM] Thread created. New thread system id - System ID: 7916
[8/20/2014 9:24:02 AM] Thread created. New thread system id - System ID: 6244
[8/20/2014 9:24:02 AM] Thread created. New thread system id - System ID: 7908
[8/20/2014 9:24:02 AM] Thread created. New thread system id - System ID: 6200
[8/20/2014 9:24:02 AM] Thread created. New thread system id - System ID: 5028
[8/20/2014 9:24:02 AM] Thread created. New thread system id - System ID: 7804
[8/20/2014 9:24:03 AM] First chance exception - 0XE06D7363 caused by thread with System ID: 7640. DetailID = 1
[8/20/2014 9:24:03 AM] Thread exited. Exiting thread system id - System ID: 7640. Exit code - 0x00000000
[8/20/2014 9:24:07 AM] Thread exited. Exiting thread system id - System ID: 6160. Exit code - 0x00000000
[8/20/2014 9:24:08 AM] Thread created. New thread system id - System ID: 1108
[8/20/2014 9:24:08 AM] Thread created. New thread system id - System ID: 992
[8/20/2014 9:24:08 AM] Thread created. New thread system id - System ID: 7784
[8/20/2014 9:24:08 AM] Thread created. New thread system id - System ID: 4432
[8/20/2014 9:24:08 AM] Thread created. New thread system id - System ID: 5304
[8/20/2014 9:24:09 AM] First chance exception - 0XE06D7363 caused by thread with System ID: 7784. DetailID = 2
[8/20/2014 9:24:09 AM] Thread exited. Exiting thread system id - System ID: 7784. Exit code - 0x00000000
[8/20/2014 9:24:13 AM] Thread created. New thread system id - System ID: 2780
[8/20/2014 9:24:13 AM] Thread created. New thread system id - System ID: 8012
[8/20/2014 9:24:13 AM] Thread created. New thread system id - System ID: 7552
[8/20/2014 9:24:13 AM] Thread created. New thread system id - System ID: 6812
[8/20/2014 9:24:13 AM] Thread created. New thread system id - System ID: 5368
[8/20/2014 9:24:13 AM] Thread created. New thread system id - System ID: 1388
[8/20/2014 9:24:13 AM] Thread exited. Exiting thread system id - System ID: 2780. Exit code - 0x00000000
[8/20/2014 9:24:13 AM] Thread created. New thread system id - System ID: 7404
[8/20/2014 9:24:14 AM] Thread exited. Exiting thread system id - System ID: 7404. Exit code - 0x00000000
[8/20/2014 9:24:14 AM] Thread created. New thread system id - System ID: 2284
[8/20/2014 9:24:47 AM] Thread exited. Exiting thread system id - System ID: 6524. Exit code - 0x00000000
[8/20/2014 9:25:12 AM] Thread exited. Exiting thread system id - System ID: 2284. Exit code - 0x00000000
[8/20/2014 9:25:12 AM] Thread created. New thread system id - System ID: 6188
[8/20/2014 9:25:12 AM] Thread exited. Exiting thread system id - System ID: 6188. Exit code - 0x00000000
[8/20/2014 9:25:12 AM] Thread created. New thread system id - System ID: 7120
[8/20/2014 9:25:12 AM] Thread exited. Exiting thread system id - System ID: 7120. Exit code - 0x00000000
[8/20/2014 9:25:13 AM] Thread created. New thread system id - System ID: 7428
[8/20/2014 9:25:20 AM] Thread exited. Exiting thread system id - System ID: 7428. Exit code - 0x00000000
[8/20/2014 9:25:20 AM] Thread created. New thread system id - System ID: 1280
[8/20/2014 9:25:21 AM] Thread exited. Exiting thread system id - System ID: 7552. Exit code - 0x00000000
[8/20/2014 9:25:21 AM] Thread exited. Exiting thread system id - System ID: 5368. Exit code - 0x00000000
[8/20/2014 9:25:21 AM] Thread exited. Exiting thread system id - System ID: 1280. Exit code - 0x00000000
[8/20/2014 9:25:21 AM] Thread created. New thread system id - System ID: 8108
[8/20/2014 9:25:21 AM] Thread exited. Exiting thread system id - System ID: 8108. Exit code - 0x00000000
[8/20/2014 9:25:21 AM] C:\Windows\system32\blbsrv.dll loaded at 0xe6240000
[8/20/2014 9:25:25 AM] First chance exception - 0X80000003 caused by thread with System ID: 992. DetailID = 3
[8/20/2014 9:25:25 AM] First chance exception - 0XC0000374 caused by thread with System ID: 992. DetailID = 4
[8/20/2014 9:25:25 AM] Second chance exception - 0XC0000374 caused by thread with System ID: 992
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 5028. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 4432. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 992. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 7804. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 7908. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 4164. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 2964. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 8148. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 5848. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 6824. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 6100. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 6964. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 7756. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 7940. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 6812. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 8012. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 5304. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 6200. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 6244. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 7916. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 5320. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 5348. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 7188. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 4920. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 1912. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Thread exited. Exiting thread system id - System ID: 1388. Exit code - 0xffffffff
[8/20/2014 9:25:25 AM] Process exited. Exit code - 0xffffffff
* EXCEPTION DETAILS *
DetailID = 1
Count: 1
Exception #: 0XE06D7363
Stack:
Call Site
KERNELBASE!RaiseException
msvcrt!CxxThrowException
VSSAPI!CVssJetWriter::SetWriterFailure
VSSAPI!CVssJetWriter::SetWriterFailure
VSSAPI!CVssJetWriter::SetWriterFailure
VSSAPI!CVssJetWriter::SetWriterFailure
VSSAPI!CVssJetWriter::SetWriterFailure
VSSAPI!CVssJetWriter::SetWriterFailure
msvcrt!srand
msvcrt!ftime64_s
kernel32!BaseThreadInitThunk
ntdll!RtlUserThreadStart
DetailID = 2
Count: 1
Exception #: 0XE06D7363
Stack:
KERNELBASE!RaiseException
msvcrt!CxxThrowException
VSSAPI!CVssJetWriter::SetWriterFailure
VSSAPI!CVssJetWriter::SetWriterFailure
VSSAPI!CVssJetWriter::SetWriterFailure
VSSAPI!CVssJetWriter::SetWriterFailure
VSSAPI!CVssJetWriter::SetWriterFailure
VSSAPI!CVssJetWriter::SetWriterFailure
msvcrt!srand
msvcrt!ftime64_s
kernel32!BaseThreadInitThunk
ntdll!RtlUserThreadStart
DetailID = 3
Count: 1
Exception #: 0X80000003
Stack:
ntdll!RtlUnhandledExceptionFilter
ntdll!EtwEnumerateProcessRegGuids
ntdll!RtlQueryProcessLockInformation
ntdll!RtlLogStackBackTrace
ntdll!RtlIsDosDeviceName_U
ole32!CoTaskMemFree
wbengine
wbengine
wbengine
wbengine
wbengine
wbengine
wbengine
kernel32!BaseThreadInitThunk
ntdll!RtlUserThreadStart
DetailID = 4
Count: 1
Exception #: 0XC0000374
Stack:
ntdll!RtlUnhandledExceptionFilter
ntdll!EtwEnumerateProcessRegGuids
ntdll!RtlQueryProcessLockInformation
ntdll!RtlLogStackBackTrace
ntdll!RtlIsDosDeviceName_U
ole32!CoTaskMemFree
wbengine
wbengine
wbengine
wbengine
wbengine
wbengine
wbengine
kernel32!BaseThreadInitThunk
ntdll!RtlUserThreadStart
* EXCEPTION SUMMARY *
|--------------------|
| Count | Exception |
|--------------------|
| 2 | 0XE06D7363 |
| 1 | 0X80000003 |
| 1 | 0XC0000374 |
|--------------------|
Any help would be greatly appreciated.

Hi
Similar post:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4d87c9a1-8f1b-4bb3-8b13-ee37bc3c014b/windows-server-backup-failing-to-start-error-a-fatal-error-occurred-during-a-windows-server-backup?forum=windowsbackup

Error 0x80070543 when activate Windows Server 2008 Backup Features

Hi, When I try to activate the Window Server 2008 Backup Features, the system prompt me an error. please review below message appear at event viewer. Not sure how it happen / solve it?
"Installation failed.
Features:
Windows Server Backup Features
Error: Attempt to install Windows Server Backup failed with error code 0x80070543. Cannot open an anonymous level security token
Error: Attempt to install Command-line Tools failed with error code 0x80070543. Cannot open an anonymous level security token"

Hi,
Have you checked the link Simon provided? Any progress?
For your information, the Servermanager.msc is dependent on the .NET framework. Any improper modification of the "Default Authentication Level" will cause the COM
modules related to .NET framework abnormal. When we attempt to install of Roles and Features to impersonate as ANONYMOUS LOGON, this security context doesn’t have permission on any of the System Folders and hence we are failing with the above error listed.
To fix the issue, please configure the related settings to default as the KB971509 suggested.
Thanks.
Nina
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

RC-50004: Fatal: Error occurred in ApplyAppsTechStack: While Installatling EBS R12 on window server 2003 SP2

Hi Mr.Hussain,
Can you please guide me how to solve this error,
i am trying to install oracle EBS R12.1.1 on windows server 2003, i am following your document, installation of EBS R12.1 in windows server 2003 SP2
i did stage everything going right, even i did md5sums for the extracted file of EBS R12 folder.
i stated installation, even installation done perfectly at the end of installation 2 Command Prompt windows appear and stopped, i try to open log file from oracle installation folder, i got this message at the end of log file
3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver c:\oracle\PROD\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for PROD instance
can you please guide me how to solve this error,

This is a generic error so you would need to check the installation log files for details about the error.
Please see if (Rapidwiz 12.1.1 Fails To Execute Ouicli.Pl During Apps 10.1.3 Techstack Autoconfig (Doc ID 1328464.1)) is applicable.
Thanks,
Hussein

I tried installing an update to QuickTime. An error occurred and it wouldn't install. I tried removing the QuickTime program, but a window appeared telling me that a fatal error ccurred during installation and I could not remove the program. Now what?

I tried installing an update to QuickTime. An error occurred and it wouldn't install. I tried removing the QuickTime program, but a window appeared telling me that a fatal error ccurred during installation and I could not remove the program. Now what?

I tried removing the QuickTime program, but a window appeared telling me that a fatal error ccurred during installation and I could not remove the program.
I think we'd better see if some other application (other than QuickTime itself) has dropped old QuickTime componentry in the system files on the PC. (If there's a version mismatch between the old componentry and the "QuickTime proper" componentry, that can create those symptoms.)
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view options on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in My Computer, open your C drive.
Open the "Windows" folder.
Open the "system32" folder.
What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

HP Laserjet Pro MFP M125A " A Fatal Error Occured Preventing Product Use" on Window XP SP3

Dear Friends,
I really need your help on this issues, recently company that i been working buy 19 Unit of HP Laserjet Pro MFP M125A printer to be install at our 19 branches. All of our branches is using Window XP SP3 and the spec is exceed the minimum requirement stated at the box of the HP Printers which means by rights, it should be no problems.
However, I sent and setup the printer at 4 branches only 1 is a success. others 3 centre is showing the same errors which is A Fatal Error Occured Preventing Product Use. I been trying to install using original CD provided by HP and driver provided at HP Support also given the same errors. The 1 Centre that OK PC spec is almost the same as the others 3 and all using default programs and software. So i dont knows what really is the problem.
This is the things i have done in hoping to successfully install the driver but WITH NO SUCCESS:
Clear temp file, disk cleanup, defragment disk and restart PC.
Reinstall Windows SP3 and restart PC.
Install basic driver only and using control panel > device and printer > add printer (Select Driver Manually). (See Pic Below)
Repair windows using original windows XP SP3 CD.
Re-Check for USB.INF file.
Repair Registry with reg cure.
Uninstall USB support and etc (Google), then re-install the printers.
Uninstall Antivirus, disable all startup and services.
Install using FULL DRIVER, BASIC DRIVER AND DRIVER MANUAL.
Sometime when running the installer, it will prompt the below error signature and HP installer will loading quite long and then crash, but others PC don't have this errors, it straight away to the installation menu until DETECTING PRINTER until 99% and shows errors "A Fatal Error Occured Preventing Product Use".
It seems that almost everythings i try cannot make the printer driver to be install. However, the SCAN driver is install successfully. Currently the printer only can PHOTOCOPY AND SCAN, without being able to print.
Please anyone which facing similiar issues to HELP ME. anythings i can do, to install the printer DRIVER.
THANKS!

Hi @gendit ,
I see that you are having issues installing several Laserjet Pro MFP M125A printers on several Windows XP computers. You are getting "A Fatal Error Occured Preventing Product Use". I can help you with this.
What version of .NetFrameworks do you have? Check Your DOTNET.
You might have to run the Windows Updates. I would update the .Netframeworks to 4.0.
I believe HP software piggy backs Internet Explorer. Should have at least Internet Explorer 6.0.
Please try these steps, most likely the wrong driver is getting installed, giving you the Fatal error.
Disconnect the USB cable.
Uninstall the printer software from the CD.
Run the software again, immediately after connecting the USB cable, follow this document to update the driver before it errors out again. A Fatal Error Displays During Software Installation.
If the issue persists, here is a document with some different steps to try.
A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows.
Please provide in detail the results if you are still having issues.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.4053",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer to Help and Support for more info

I have been receiving this error trying to install SQL Server 2012. Initially I already had SQL Server 2012 on my machine and attempted to install BIDS 2008. My IT guy stated that there was a conflict in the installation and suggested that I uninstall SQL
Server 2012 and then attempt to install 2008 BIDs again. Fail. I got a similar error as I pasted below. Giving up on having 2008 BIDS I've been trying to reinstall 2012 SQL Server but am getting this message below.
The links provided by this message are no help at all (For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDF039760%25401201%25401)
I've attempted to repair my .NET framework, didn't help.
I've followed the steps in these threads (http://support.microsoft.com/kb/2688946), (https://support.microsoft.com/kb/957310?wa=wsignin1.0) and (https://social.msdn.microsoft.com/Forums/en-US/beeceb19-69cc-4044-94f0-591feec04626/an-error-occurred-during-the-installation-of-assembly-microsoftvc80crt-public-key),
neither one fixed the error.
Any help? Anyone else run into this error? What should I do?
TITLE: Microsoft SQL Server 2012 Setup
The following error has occurred:
An error occurred during the installation of assembly 'Microsoft.VC80.ATL<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="e03584ff-5e55-4073-ac2e-d3e07379c0ae">,</gs>version="8.0.50727.4053"<gs
class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="20b968d8-03a3-4284-bffc-0cc1a90d2aac">,</gs>publicKeyToken="1fc8b3b9a1e18e3b"<gs class="GINGER_SOFTWARE_mark"
ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="9b86ea8f-9852-4110-a616-a1e085d740c6">,</gs>processorArchitecture="x86"<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8"
id="f52b7568-d5e6-4099-a8ee-ebc11fbf4acc">,</gs>type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80073712.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK
TITLE: Microsoft SQL Server 2012 Setup
The following error has occurred:
SQL Server Setup has encountered an error when running a Windows Installer file.
Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="297b0922-8852-404d-9dc1-a9b38415a2e5">,</gs>version="8.0.50727.4053"<gs
class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="785a0f51-5ed5-41ee-97a8-8fc31122e2ae">,</gs>publicKeyToken="1fc8b3b9a1e18e3b"<gs class="GINGER_SOFTWARE_mark"
ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="8aa968bd-ff25-4e9d-9109-a219a98ee5e8">,</gs>processorArchitecture="x86"<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3"
id="aa9e7ba2-4f5a-4d89-bf64-dcff0714afaa">,</gs>type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80073712.
Windows Installer file: c:\2f4e5903553a88acc6726f538e140c4d\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi
Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150213_150637\SqlSupport_Cpu64_1_ComponentUpdate.log
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325
BUTTONS:
&Retry
Cancel

Hi Gurmo,
HRESULT: 0x80073712 means ERROR_SXS_COMPONENT_STORE_CORRUPT, and it is one of the error codes listed at this
KB article.
I suggest you run the System Update Readiness tool and check if the error still persists.
There is a similar thread for your reference.
https://social.technet.microsoft.com/Forums/en-US/0b3d0479-b9c0-4551-a623-1519ce7584af/error-when-installing-sql-server-2008-r2-rtm-on-windows-server-2008-r2-foundation?forum=winservergen
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP).

Hello everyone:
I know this question have been asked in these forums quite a few times. I apologize if it is a repeat telecast but I was not able to find a suitable solution pertaining to my problem.
I have a AP/SM setup that is configured to get EAP-PEAP authentication from Windows 2012 Server. I have setup everything and have verified that the EAP-PEAP authentication works fine on AP/SM by getting authentication from FreeRADIUS server. Now, when I try
to get authentication from Windows Server, I am getting a reject. The Event log shows this generic message:
Reason Code: 23
Reason:
An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP). Check EAP log files for EAP errors.
There is nothing in the EAP logs that is obvious too:
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4927",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4927",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4928",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4928",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,11,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,3,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,11,"PEAP_TEST",23,"311 1 10.120.133.1 07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
So, basically, the sequence is this:
request , challenge, request , challenge, request, reject
Any idea what might be happening?
Thank you.

Hi,
Have you installed certificates on the NPS server properly? Have you selected the proper certificate in the properties of PEAP?
Here is an article about the Certificate requirements of PEAP,
Certificate requirements when you use EAP-TLS or PEAP with EAP-TLS
http://support.microsoft.com/kb/814394
If your certificate matches the requirement, you may try to reinstall the certificate by export and import.
To export a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree under the logical store that contains the certificate to export, click
Certificates.
In the details pane, click the certificate that you want to export.
On the Action menu, point to
All Tasks, and then click Export.
In the Certificate Export Wizard, click No, do not export the private key. (This option will appear only if the private key is marked as exportable and you have access to the private key.)
Provide the following information in the Certificate Export Wizard:
Click the file format that you want to use to store the exported certificate: a DER-encoded file, a Base64-encoded file, or a PKCS #7 file.
If you are exporting the certificate to a PKCS #7 file, you also have the option to include all certificates in the certification path.
If required, in Password, type a password to encrypt the private key you are exporting. In
Confirm password, type the same password again, and then click
Next.
In File name, type a file name and path for the PKCS #7 file that will store the exported certificate and private key. Click
Next, and then click Finish.
To import a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree, click the logical store where you want to import the certificate.
On the Action menu, point to
All Tasks, and then click Import to start the Certificate Import Wizard.
Type the file name containing the certificate to be imported. (You can also click
Browse and navigate to the file.)
If it is a PKCS #12 file, do the following:
Type the password used to encrypt the private key.
(Optional) If you want to be able to use strong private key protection, select the
Enable strong private key protection check box.
(Optional) If you want to back up or transport your keys at a later time, select the
Mark key as exportable check box.
Do one of the following:
If the certificate should be automatically placed in a certificate store based on the type of certificate, click
Automatically select the certificate store based on the type of certificate.
If you want to specify where the certificate is stored, select
Place all certificates in the following store, click
Browse, and choose the certificate store to use.
If issue persists, you may try to re-issue the certificate.
For detailed procedure, you may refer to the similar threads below,
Having issues getting PEAP with EAP-MSCHAP v2 working on Windows 2008 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c66cf0a8-24dd-4ccd-b5bb-16bd28ad8d4c/having-issues-getting-peap-with-eapmschap-v2-working-on-windows-2008-r2?forum=winserverNAP
Hope this helps.
Steven Lee
TechNet Community Support

A fatal error occurred during a windows server backup snap-in operation;

Similar Messages

Maybe you are looking for