A few 8100 questions from a new guy.

I just purchased a used 8100, and have a couple of questions.
Is there anyway I lock just the message application, instead of the whole phone?
Also, when I tried to set up my E-mail it said that there was already a different account for this pin number. What can I do to reset that and set up my own? 

In BlackBerry there is no option to separately lock one single application. You can think of any 3rd party apps for this.
As you purchased an used device you need to collect the user name and password for Email setting apps from the original owner. Your carrier might not help you as this will violate the original user  rights. If the original owner forgets the password as well then ask him to call his carrier and identify himself and make it unlocked for you.
tanzim                                                                                  
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

  • A few simple questions from a new Iphone user

    Hi a few simple questions, just got an iphone 2g - 2nd hand so not really sure what to expect. Anyway I guess my first question is about mine sometimes being a little slow - when I look at contacts and sometimes when sending a txt it slows down/freezes a little - normal?
    Secondly Edge - I havent used it much but when I have its been painfully slow, is this normal - is it always really slow - cause I had read despite not being 3g Edge was actually pretty fast - what exactly is data roaming by the way? I mean I have been switched off as basically I dont wanna use the internet till next month when they change my contract to one I get unlimited access on - is that right?
    Im having a problems syncing videos to it - it just wont sync some but will others and Im not sure why - theyre same file type and they used to sync to my ipod touch but now they wont for some reason
    Cheers

    I have the origina iPhone.
    Downloaded 2.0, synced phone with everything UNchecked. Installed 2.0. Synced with all the options checked to reload my data. The iPhone has been great. Noticed a little lag when I opened contacts. Installed the new upgrade, and everything is back, no lag.
    Edge is Edge and nothing more. It is slow compared to a strong 3g signal. But is liveable most of the time. Heavy traffic can slow it down to barely usable.
    My four wheel drive club has a web site with a large photo section. I was standing out in the middle of parking lot in San Jose, Ca and showing a friend some photos. It opens up a page of small picts to choose from. Select a print and it enlarges, He was amazed at how fast they appeard. Especially given the quantity of photos.

  • A few basic questions from a new user - backups, moving files, sharing

    I'm a Mac user considering getting an iPad. I'm hoping someone can clue me in to some basic aspects of the experience:
    1) are backups easy? can you "clone" it (the way I do with my desktop and laptop) so that everything (content, settings, preferences, etc.) can be restored exactly in the event something happens to it?
    2) how does one move files to it? Specifically, PDFs - I have a ton of PDFs I plan to be reading on this thing. Does it show up as a drive (drag-and-drop) when connected to my desktop machine, or does it work through a special conduit or? Does it have a filesystem we can see?
    3) is there any notion of "users" - can multiple people share it and have their own sets of preferencs settings/content?
    4) is the iPad 2 date still best estimated as April? I need it for a trip in mid-March and I don't want to buy the 1st model if the second is coming out shortly thereafter. Is there any likelihood of having it be available in the first week of March? If not, is there a good place (on-line) to rent one for a week perhaps?
    thanks in advance!
    Mike

    1, yes they are easy, but they are not a clone. When connected to iTunes on your computer you just tell it to backup. That will backup your notes, settings, app data, but not synced data (i.e. not your music, films or contacts and calendars synced from your computer).
    2, via iTunes, not as a drive. PDFs can be dragged into iTunes and then synced to the iPad to go into the (free downloadable) iBooks app. Alternatively you can buy an app like Goodreader which allows you to transfer PDFs wirelessly from your computer (can also be used to read/store PDFs emailed as attachments).
    3, no. There is only one set of options. If you have children (or even other adults) then you can set a passcode to restrict access to, for example, Safari, iTunes, or the ability to install and delete other apps. But it's basically a single user setup.
    4, speculation as to what Apple may, or may not, be planning is prevented by the terms of use of these forums. All that can be said here is that no new version has been announced, and when/if one is it will be on the apple.com frontpage. You should ask yourself whether the current one meet most, if not all, of your requirements, not whether some unannnounced item might.

  • Basic Question from a new guy

    Earlier question by me brought a response from Priya (thanks Priya) that I should post the results of querying my lsnrctl settings.
    How?
    I can run the query from DOS and get a pretty impressive output, but how do I save the output and then incorporte into a message such as this?
    thanks
    frank

    Hi ,
    It's simple ...
    Just riht click and select "Mark". Then press <Ctrl>+<C> and then <Ctrl>+<V> here to paste it.....
    LSNRCTL> status
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Pr
    ction
    Start Date                17-╓┼┬ -2007 16:25:16
    Uptime                    0 days 1 hr. 52 min. 34 sec
    Trace Level               offRegards,
    Simon

  • Why can't I post a question from my new system?

    Hello All:
    I was just trying to post a question from my new mbp but it wouldn't allow me to do anything.  It continually gave me a message highlighted in 'red' that i was;t allowed to modify or post anything.  I've been asking questions for quite a while and have never seen this.  I also happen to have my older bmp, also logged onto the 'Apple Discussions' site, open beside me.  Can anyone explain this to me please?  BTW, my new system obviously has Yosemite on it while my older bmp has Lion.  Thanks in advance, to all those who respond.
    Regards,
    Ciaochiao

    ChitlinsCC, I'm adding your reloaders to my article on how to make using ASC easier.
    Here is my ASC work flow...
    1) I login.
    2) Block the automatic 30 minute logout.
         Unless you do something every thirty minutes you get logged out.  The forum software waits to tell you this as long as it can to keep you in suspense  ;-) . Filling out a reply is the exception to the thirty minute window.
            Start an auto reloader.
    Safari = SafariTabReloader
    Firefox = ReloadEvery: "Reload web pages automatically"
    Others = Reloaders | Cerberus - Support Center
      You need to pick a page that will reload over time without stalling out. It's ASC.  I've found my profile display the best to use. I get my Profile page after some  logins.  It's ASC.  Change rccharles to your apple id.
    https://discussions.apple.com/people/rccharles?view=discussions
    Reply technique
    Open a new browser window.  Pick some discussion.  Open a reply window.  As long as this reply window is open, you will stay logged in.  The 30 minute times is reset as needed by the ASC software.
    3) I open another window to do my normal ASC browsing.
    4) I have a FireFox bookmark to goto the discussions that I have participated in. I've modified it to add on the content stuff.
             turingtest2 recommends. Change rccharles to your apple id:  
    https://discussions.apple.com/people/rccharles/content?filterID=participated~obj ecttype~objecttype%5Bthread%5D
    5) Use turingtest2's generated links with the /content suffix as browser bookmark to the ASC discussions: 
    Site map of Communities and Categories
    https://discussions.apple.com/docs/DOC-2463
    6) Adjust the ASC web page layout.
    For FireFox
    I run with Hiroto's modification to user content.  This is the only way these forums are readable for me.  How to adjust the format and layout of ASC Web Pages:
    https://discussions.apple.com/docs/DOC-7501
    For Safari
    "ASCPowerTools is a Safari Extension designed to give more control"
    http://www.etresoft.com/ascpowertools
    7) Read and answer my old posts.  I kind of memorize the time I last posted. ( It's way bad that apple eliminated the last poster to a thread. )
    8) I use tabbed browsering.  From a list of discussions, hold down the command key then click on the link. You get two tabs this way. The original window will keep where you have been.

  • May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

    May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

    Or you can actived the right button on your magic mouse and click on they icon in the dock. then you select "stop" and it's out of your dock.
    Greetings
    *update: Sorry, my mistake! I didn't read your message correct! Sorry for the inconvience!

  • Few simple questions from newbie

    I'm new to Java, but i've worked a lot with action script... it didn't help a lot :) Here are my few beginner questions:
    What does: public, static, abstract, void... and other things mean in front of the class name?
    How can i call variables from another classes: if i have one class that does one thing and stores the result in a variable, how can i use that variable from a different class?
    How can i call the input window to enter the value for variable? I've tried with importing "io.inputstream" library, and used the "extend" thing, but i still cant call the input window?

    I came to Java from ActionScript too, and I must say having ActionScript as your first programming language does NOT make it easy to learn other languages. I was incredibly lost when starting with Java.
    What does: public, static, abstract, void... and
    other things mean in front of the class name?You'll find all that in the Java Tutorial
    How can i call variables from another classes: if i
    have one class that does one thing and stores the
    result in a variable, how can i use that variable
    from a different class?To use the variable from another class, you need to make a call to the class. Let's say you're in ClassB; you would make a call to a ClassA variable by doing something such as:
    ClassA.myVar.myMethod();
    How can i call the input window to enter the value
    for variable? I've tried with importing
    "io.inputstream" library, and used the "extend"
    thing, but i still cant call the input window?I recommend reading the tutorial before you try anything like that.

  • 3 Questions from a new Blackberry convert

    Hello! I'm a PocketPC user turned BB owner and I dove in with the 8900.
    I just have a few usability questions and I'm hoping you can help...
    1. Is there a way to have notifications of new SMS, email, and IM messages pop up? I get the tiny icon at the top, but I have to back out of whatever I'm doing, go into the appropriate app, and guess where the message is. I saw a couple of apps on Handango that might do this, but they don't seem to work with IMs, which is the worst of the all. Any suggestions? (I'm spoiled by my multitasking PPC.)
    2. Can I change the icons that appear on the first screen? I have two email accounts so I have the messages thing, one email, the other email, then contacts, calendar and browser. The second email pushed the Media icon off. Is this customizable?
    3. This is a biggie for me: When I create an event in the calendar, I know that I can set the reminder for whatever I want. And I found the option to set the default snooze time when the event pops up. But here's the thing: there are some events that I want to warn myself about 3 days in advance, then snooze til the next day, and others (like picking up a kid, for instance) that I want to have pop up 30 minutes before and snooze for 15 minutes. As far as I can tell though, if I want to snooze for any amount of time other than the default, I have to open the event itself and change the reminder time. Is there any other way?
    Thank you so much for your insights!
    ~emily

    Hi and welcome
    1. I recomend you to solve this problem with two programms: BerryBuzz and Aerize Email
    2. Press the Menu button (left of the trackball), go to the icon you like to move, press the menu button again, choose Move and move the icon in the very first row. On this way you will get it on the homescreen.
    3. I think, you cannot set different times for snooze and popup a calendar event, popup and snooze happens in the same time (f.e. 15 min, 30 min, x day etc before the event). If you want tohave different notification for each event, you must change itfor every event separately.

  • Hi there.....some questions from a new musician (on this forum that is)

    Hey!
    New guy here......37 year old Swede, living in Los Angeles since 1988......guitar player since age 12. Pretty new to the whole computer recording thing, now working in GB3 and have Logic Express.......Some quick questions.......
    A decent audio interface?.......Right now Im running through a Line 6 POD XT PRO (the rack mounted version) It works great, for recording guitars (real) and bass and such, but recently aquired a Roland PC-200 MK midi controller, and the POD does not recognize other midi devices...? (understandably, as it is a guitar thingamagig)
    All my buddies do Pro tools, and was thinking maybe going the way of that......I understand the M-box works with garageband and Logic, albeit not SO good as let's say a Presonus Inspire or Firebox......What to do?
    Still debating wheter going with Protools or Logic? Positives, negatives please......
    I heard that ProTools is more live recording, versus Logic is more MIDI friendly.......? Understanfably you can do EVERYTHING you can do on Pro tools on Logic, I guess the difference is, if youre working with it (I am not) then perhaps if time is an issue, you choose one or the other depending on what works best.......
    I sit home, record, Time is plentiful, but do plan on recording a CD (solo material) mostly guitars, bass, midi drums and keyboard and vocals......
    Anybody with any input, suggestions etc.... will be greatly appreciated.....
    I'm glad to be here!
    Stefan

    Welcome to the forum Stefan.
    You are pretty much right on about Logic vs Pro Tools. Logic is mainly a MIDI sequencer (and the best one at that!) with added audio recording capabilities, while Pro Tools is mainly an audio recording DAW with some MIDI capabilities (I hear that Pro Tools 7 is pretty darn good with MIDI, but haven't tried it).
    Regarding the interface, what's your budget? If you have the money and are very serious about recording, I would suggest getting the Apogee Rosetta 800 (or 400). If money is tighter than that (as in my case) I would go for the Presonus Firepod. Best in it's price range by many accounts. If that's too many inputs for your needs, then I would suggest it's little brother, the Presonus Firebox.
    You'll also want to check into getting some decent monitors (speakers). All this stuff is useless without something to listen to. And they need to be accurate.
    Good luck,
    X

  • Few questions from a new user

    Hi Guys
    I've had my 3gs 16GB for about a week now. I am absolutely loving it, but I have a few questions.
    I am completely new to apple products. I had never used itunes before I bought my phone.
    First question is about the battery. I know this has been greatly discussed and I have searched through the forums and have found just about all of the answers I was looking for, so this is more of a comment than a question. I was a little worried about all the issues people are having with their battery life, so I did a few tests. I am pretty happy with the results. I have the following settings:
    wifi - on
    notifications - on
    brightness - ~40%
    bluetooth - off
    3G - on
    push - off
    fetch data - hourly
    After 48 hours the battery is at 10%. Usage is at 5 hours which included mostly internet browsing on wifi, about 20 sms messages, and about 10 minutes of calls. This is about what I was expecting. The only question I have about the battery is about charging. I am going to charge it daily and once a month fully drain and recharge. I haven't found out if it is ok to leave it plugged in after it has fully charged. Do I need to take it of the charger when it is fully charged, or does the battery shut off and just use the external power source? Ideally I would like to charge before I go to bed and take it off the charger when I wake up.
    Next question is mainly about accessories. I would like a good case that is minimal, but still providing protection from scratches. Are there any good recommendations or is it just kinda personal preference. Also, has anyone tried some of the screen protectors on the market? Can you tell that they are there, or do they give you any problems with the "touch" and "feel" of the screen?
    Thanks

    joshdsalley wrote:
    Hi Guys
    Next question is mainly about accessories. I would like a good case that is minimal, but still providing protection from scratches. Are there any good recommendations or is it just kinda personal preference. Also, has anyone tried some of the screen protectors on the market? Can you tell that they are there, or do they give you any problems with the "touch" and "feel" of the screen?
    Thanks
    I don't use a protective case on my iPhone has I think it spoils the look of it. Instead I have a leather case that provides protection from the screen getting scratched and can be easily taken out when I need to use the iPhone.
    The case I got has a soft velveteen interior which protects the screen from scratches. It wasn't cheap (£25) but it is well made and is lovely soft leather, and you can tell it will last.
    Here's the link to it:
    http://www.knomobags.com/eshop/knomo_product.asp?SS=5&C=84&CA=227&P=394
    I have read though that some screen protectors can interfere with the photo sensors on the iPhone (there the 3 little dots that you can see to the left of the earpiece) whereby the screen will remain on or off when it shouldn't be.

  • A few questions from someone new to Aperture (and DSLR photography)

    Hi - I have just got my first DSLR camera (A Nikon D3000) and am trying out Aperture 3. I had a few questions which aren't all just necessarily Aperture related:
    I have imported my library from iPhoto, however now all my albums are in alphabetical order, rather than date created. I only seem to have the option to arrange my albums by, "Kind", "Name" or "Manual". Any idea how I restore the date created order?
    This may be too large a subject for here (I should probably buy a book on the subject), however JPEG, NEF and TIFF - I am shooting in raw mode which is generating NEF files. I had tried RAW+JPEG, but the basic JPEG this creates is really quite poor. The NEF files are generally around 7-12Mb. If I open them for editing in Photoshop, a TIFF file is generated in Aperture which looks to be over 8x the size of the original raw file, sometime over 100Mb. I then seem to be able to save it back as a JPEG at pretty much maximum quality which results in a file slightly smaller than the original raw file. Is it necessary to keep the large TIFF files once I've created a jpeg? Am I best off just keeping the finished jpeg and the original raw file in case I want to make changes?
    When publishing to flickr, It would be good to be able to just publish the latest versions of all photos in an album. ie not the same photo in tiff, nef and jpg format. Is there an easy way to do this, or is it a case of manually picking each one?
    Also - When uploading NEF files to flickr it would appear to convert them to jpg, which is kind of good I suppose, but does anyone know what level of quality the jpegs created are? Am I best off converting them to jpeg myself first and then uploading? If I did this then my albums would be full of duplicates in different formats, which leads back to my previous question about uploading just one version of each. That may be a question for the flickr forum...

    You have jumped into the deep end with both feet.
    With Aperture running select the single the Browser and you will find the sort controls under the Mobileme to New Smart Album icons depending on how stretched out you have the Inspector panel. There is the ability to sort by just about every parameter there either ascending or descending.
    Can Aperture not convert your NEF files? You dont have to have Tiff files at all. See your Preferences regarding External Editor. How much storage space and your archiving requirements will influence your decision about retaining Tiff files.
    I know nothing about Flickr but assume you will have to choose your own images. I doubt a Smart Album can select exactly what you need.
    When uploading files online galleries generally optimise the images. You are wasting your time uploading massive Tiffs IMHO. Most web services work with jpegs I understand. Consult the Flickr help and support for their requirements and advice.
    Enjoy your new hobby.
    AW
    Whether you have the room to save Tiff files as well as Raw files will probably decide whether you keep them or not.

  • A few questions from a new tech...

    It is based on the conversion process of a Cisco 6500 Series switch (WS-Sup720-3B release) w/MSFC3 from a hybrid mode (CatOS/IOS) over to a native mode. I've found a few conversion processes online however, I do not know which process is the best to use (as some of them seem outdated) and detailed enough:
    http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/12031-catos-ios-conversion-6500k.html
    http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/70273-70273.html
    http://www.ciscopress.com/articles/article.asp?p=102093&seqNum=5
    Also, another question that I have is about the correct, most up-to-date software. Whenever I use the Cisco software download navigator to search for an applicable image, I see different images based on various network requirements. Are these images applicable to this process? 
    https://software.cisco.com/download/release.html?mdfid=280829702&flowid=20135&softwareid=280805680&release=15.1.2-SY4a&relind=AVAILABLE&rellifecycle=ED&reltype=latest
    Any help would be very much appreciated.

    It depends on how complicated your configuration is.
    When I did this a long time ago I just did it by hand ie. I didn't use a conversion tool I just created a new configuration in a text editor and then copied in the new configuration.
    A lot of the commands in a configuration are defaults and you don't necessarily need to replicate them because you will get a new set of defaults when you convert.
    If you have a lot of extra configuration eg. QOS then it may be worth using one. It really depends on how well you know what your switch is currently doing.
    In terms of IOS image key things are -
    1) feature set ie. you need a feature set that supports all the things you are currently doing
    2) memory on your supervisor and whether you have enough
    3) module support ie. you need to check the release notes for each release because they may not support all your existing modules
    Jon

  • Few Questions From A New

    what's up? new creative user, just jumped on board in april with a Muvo Micro N200 GB and bought my little sis a 256 Muvo TX FM. I just have a few questions for the experienced users.
    . What's the point of the Zen Micro? Spend 80 bucks on a 5 GB player when you can buy a 20GB player for around 200 (Zen Xtra), what sense does it make?
    2. Why doesn't the zen touch come in 60GB capacity like the XTRA?
    3. Why is the Touch soo much more expensi've than the Xtra?
    4. Why are people still buying ipods when creative is >>> the ipod in almost every way? Show me an ipod with 20 gigs that can hold 0,000 songs, FM radio, voice recorder, and with a 24 hour battery life.
    5. why is Cnet.com sooo biased towards the ipod?
    6. WHERE is the zen sleek available? I checked amazon.com - not there.
    7. what's the difference between the muvo micro n200 and the zen nano plus that I've seen in walmart? features are the same.
    8. Why doesn't creative include some REAL headphones with their mp3 players instead of those pieces of feces that they come with now? After spending 300 for a 40 gig zen touch, I deserve some decent headphones!
    dang, didn't realize I had soo many questions.

    Okay, let me give this a try:
    . Simple - the Micro is smaller. For many folks, convenience and portability are more important than capacity. Try fitting an Xtra in your front pocket.
    2. Again, it's a size issue. The Touch uses a single-platter .8 inch dri've. In any player the bulk of the space is taken up by the dri've and the battery. bigger dri've=bigger player. The Touch was designed to compete with the itty-bitty Ipod.
    3. The Touch is a newer model that incorporates the whole "touch" interface. Newer things are almost always more expensi've.
    8. No company provides decent headphones with their player. Have you ever heard Apple's headphones? Part of this is cost, and part of it is that for many people, especially audiophiles, headphone choice is very personal. It is akin to why most bikes don't come with pedals.
    There you go Bitch!Message Edited by cameron on 08-02-2005 07:35 AM

  • A few questions from a new iMac user!

    So far I am loving this computer! However there are a few things that I can not figure out how to do and really dont have time to go to the store for a class at the moment. So hopefully you will be able to help me out.
    1. We have iWorks installed and I am trying to make a simple calendar to hand out to my students with information about due dates and such. Previously I was able to do this on Word but I can not figure out how to do this here!
    2. How do I copy and paste?
    3. With this new mouse how do I get it so that there is a right click?
    Thank you all so much and I am sure you will see me on here plenty!

    1. We have iWorks installed and I am trying to make a simple calendar to hand out to my students with information about due dates and such. Previously I was able to do this on Word but I can not figure out how to do this here!
    Pages, presuming you're referring to Apple's iWork suite, doesn't have a template for a calendar included. There are some suggestions in this thread:
    http://discussions.apple.com/thread.jspa?messageID=6949516
    You might also consider using iCal. You could set up a calendar just for student dates and then print that calendar only.
    3. With this new mouse how do I get it so that there is a right click?
    You'll need to go into the Mouse system preferences and define the right-click action. The default is for the "left-click" and "right-click" both to be a standard click.
    Hope this helps.

  • A few questions from a new user.

    Good afternoon,
    While I have been doing graphic art as a hobby for an extreemly long time, i am very much a student per say when it comes to photoshop having just got it recently. So please exuse me if my questions have simple answers i just simply have yet to find.
    I am currently using gimp and photoshop CS5, i use them both since soome things i simply do not know how to do in photoshop.
    1) Sometimes I will use gimp to set the transparency color on an entire image to try to capture certain aspects of an image like highlights or shadows to place into another image.
    an example would be like, say i have a flame  in the darkness and you can make out some Silhouettes in the background. I want to eliminate all the black to capture the flame and the greys/highlights. How would i set the transparency layer to remove all or part of the black in the image.
    2) How do i scale a layer and keep it center of the image?
    3) How do i make a custom pathing image and have the brush follow it?
    4 when i have a brush following a path is it possable to have it auutomaticly turn as the path turns?
    I answered two of my own questions while writing them so i guess for now i only have the two questions. I am sure i will have more as time ticks on. Thanks for reading.

    OK, I am sorry I don't think i am making my self clear enough what i am trying to do.
    here is a more complex example:
    In this image I am making the windows transparent so they can be seen through while keeping the walls solid. to do this i take a section off the windows and set a color transparent, In this case i set light blue (94d3fb) as tranparent but only with in the window portion cause i do not want to see through my walls.
    Now with the windows transparent i can use them to look out of and see the things on the other side.
    In gimp i just make the color transparent,
    would I use a mask and perhaps set the mask to mask a praticular color?
    Again i apologise, i am simply trying to learn how to do what i know how to do in gimp.

Maybe you are looking for

  • How can I transfer/merge the backup-data of one iphone onto another iphone?

    I have two iphones and want to merge the backup-data from one to the other without destroying any data on the new one. How can I do it and will this data be replaced automatically or merged? Thanks for your help! Toni

  • Creating inbound idocs in the same system

    Hi Could you please let me know the Steps i should follow to get the following req done? Iam creating INBOUND IDOCS from flat file ...so my sending and recieving systems are same... In WE20 i have setup the logical system and assigned inbound paramet

  • Do I have to download each app every time I use?

    I ran CC, and chose Illustrator app - took me hours to download and each time I checked it had downloaded in parts... 1% - 14% etc etc Came back the next day - gone - no files - no app to install or run and  have to download again ?? I dont have the

  • Lightroom problem with CR2 images

    I have LR loaded on my MacBook Pro and everything was alright in terms of LR operation. I use a 5D MKII camera and always shoot in RAW (CR2). I always download images from the Card to the HDD and then import it to LR. However, CR2 Raw files are not g

  • Reg expression

    can somebody tell me how to write a query using regular expression instr function to find any alpha character in a string except + - . i have a varchar field that can contain any of the following values 234, 345.32, -66.33, +32. if the value enter is