A field to be displayed in portal legth of 3 and r/3 more than 255 char
Hi all,
Kindly give me reply, I need to display one structure in portal, in this one field is of length 255 char.
Need to change it to more than 255 characters but it should be display in portal as 3 or 5 char length only, can accept more than 255 char lengtjh.
thanks & regards,
Chandra sekhar.
Hi Chandra sekhar,
A similar kind of a probelm is explained in the link below:
Link:
The other requirement of displaying it as 3 - 5 chararcter field in portal can be done by creating the iView as required.
Regards,
Pranav.
Similar Messages
-
How to display more than 255 chars in background job with ALV Grid ????
Hi All,
I am using ALV grid with OO.
I have used call screen for ALV grid display. I have to display more than 255 characters in width. While running it, I can see the list perfectly.
But in background mode, the list is truncated after 255 chars.
Can anybody help how to send complete list(width more than 255 chars) to spool.
Thanks and Regards,
NehaHi SAP fan,
<b>YES you can run the ALV report in background mode.
To run the report in background do F9 instead of F8, then give immediate and save.
Now goto Sm35 goto job overview and view the job listed
Choose the job and press the spool button. It will show the list created on the next page. When u clcik the list u can see the ALV output.
To see this the job should be in the finished status.
How to define Periodic Jobs
1.Execute transaction SM36
2.Define Job name, Job class, Target server
3.Click on 'START CONDITION' button
4.Click on 'Date/Time' button
5.Enter Scheduled start DATE & TIME. Check mark 'Periodic Job' field. Click on 'Period values' button and select 'Hourly' or 'Dialy' or 'Weekly' or 'Monthly' or Other period and SAVE. Go back to main screen.
6.Click on 'STEPS' button and enter Program name and Variant under box 'ABAP Program'. Click on 'Print Specification' button and enter Printer name under 'Output device' and SAVE
7.Click on SAVE button until you get message on bottom of the screen that describes 'Job XYZ saved with status: Scheduled'.
8.Click on 'Job overview' button or execute SM37 transaction.
9.Select the appropriate 'Job name', 'User name', 'Job Status' & Schedule date under 'Job start condition' and click on 'Execute' button or press F8.
10.You will now see all your scheduled JOBS.
<b>Case: 2</b>
You can Run in Background but make sure it is alv list, not alv Grid FM. if you are uisng alv list not problem , but if you are using alv grid then you can code like this..
if sy-batch = ' '.
call 'REUSE_ALV_GRID_DISPLAY'.
else.
call 'REUSE_ALV_LIST_DISPLAY'.
endif.
if you are using OO alv then write this code..
CALL METHOD cl_gui_alv_grid=>offline
RECEIVING e_offline = off.
IF off IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
ENDIF.
<b>Case: 3</b>
if you are using OO ALV.
Just before creating the custom container check for the following condition.
Batch or Web Reporting
IF cl_gui_alv_grid=>offline( ) IS INITIAL.
CREATE OBJECT o_custcontainer
EXPORTING
container_name = lc_custcontrol
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6
ENDIF.
You can see the output in Spool in transaction SP01.</b>
Good Luck and thanks
AK -
Is it possible to create a Large Text Field in OCOD, more than 255 Char?
Is it possible to Create a Long Text Field (more than 255 Char Long) as like Description field in OCOD?
Not at this time.
-
Is it possible to Create a Long Text Field (more than 255 Char Long)?
Is it possible to Create a Long Text Field (more than 255 Char Long) as like Description field in Service Request Object??
Thanks!Hi
User can only create custom Long text field (255 Charcter) . Currently system does not support custom note creation -
How to get a field more than 255 char back in ITCSY stru
I am getting multiple invoice numbers from the calling pg. The calling pring pg is standard, so cannot touch that.
Now in my sapscript, i have to concatenate all invoice numbers and show them.
I had used a perform to do so.
It was fine till now. But recently we found that invoice numbers can be so many as to cross 255 char in total.
How to get it done now? ITCSY struc has limitation of only 255 char .
Please advise.
Thanks in advhi,
say for example the number was around 300 characters.... so when you are calling the subroutine pass on 2 variables with two different names say var1 and var2 these both can accommodate around 255 characters each....
now in the subroutine split the values into these two variables....
and in script
&var1[c]&&var2[c]&
this will compress the spaced between them.... hence its similar to concatenate...
Regards,
Siddarth -
Uploading excel file into internal table with field length more than 255
I am trying to upload the data from an excel file through function module 'TEXT_CONVERT_XLS_TO_SAP'.
I have tested by changing the field type from string, and char2000.
But it is accepting only 255 chars from the cell content.
How to get the total content of the field if it is more than 255 char.hi,
you can use any of the following procedures:
For uploading data from excel to internal table refer standard report RC1TCG3Z in se38 :
or
You can use the FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' itself. Please check if you have done it this way . But, this FM can be a little time consuming if the excel has large data, so you can use the FM u2018GUI_UPLOADu2019.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = p_file1
i_begin_col = l_b1
i_begin_row = l_c1
i_end_col = l_b2
i_end_row = l_c2
TABLES
intern = lt_data
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE e018 DISPLAY LIKE 'i'.
ENDIF.
*---Removing the first heading fields from the file.
IF NOT lt_data[] IS INITIAL.
LOOP AT lt_data INTO lwa_data WHERE row = '0001'.
DELETE lt_data.
CLEAR lwa_data.
ENDLOOP.
*---Inserting the data from file the internal table
LOOP AT lt_data INTO lwa_data.
CASE lwa_data-col.
WHEN 1.
wa_file_wicopa-serial = lwa_data-value.
WHEN 2.
wa_file_wicopa-blart = lwa_data-value.
WHEN 3.
wa_file_wicopa-bldat = lwa_data-value.
WHEN 4.
wa_file_wicopa-budat = lwa_data-value.
ENDCASE.
AT END OF row.
APPEND wa_file_wicopa TO gt_file_wicopa.
CLEAR wa_file_wicopa.
ENDAT.
CLEAR lwa_data.
ENDLOOP.
ENDIF.
ENDIF.
or
DATA: it_test TYPE STANDARD TABLE OF alsmex_tabline WITH HEADER LINE.
DATA :v_start_col TYPE i VALUE '1',
v_start_row TYPE i VALUE '1',
v_end_col TYPE i VALUE '256',
v_end_row TYPE i VALUE '65536',
v_text TYPE repti.
* Funtion Module to upload values from excel to the Internal table
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = p_file
i_begin_col = v_start_col
i_begin_row = v_start_row
i_end_col = v_end_col
i_end_row = v_end_row
TABLES
intern = it_test
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Or
You can use FM u201CTEXT_CONVERT_XLS_TO_SAPu201D.
DATA : i_raw TYPE truxs_t_text_data.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_field_seperator = 'X'
i_tab_raw_data = i_raw
i_filename = p_path
TABLES
i_tab_converted_data = itab
EXCEPTIONS
conversion_failed = 1
OTHERS = 2
hope it will help u
regards
rahul -
Save More than 1000 chars in a field of (Z) Database Table?
Hi Friends,
I created a database table with few fields. In the table, one field is REMARKS which should save more than 1000 characters for every record. For that field, I created domain & data element of char with 2000 length. But system gives an error representing that "Should not be more than 255 chars ".
Even, select statement is also retrieving 132 chars only, if remarks are less than 255 and greater than 150 chars.
Could you please provide me solution?
Thanks
SarayuHi,
The Most simple solution for it can be that Divide the field REMARKS of size 1000 in multiples of 200 characters like REMARK1, REMARK2....REMARKn.
Now you can create two FMs :
zset_data: To Store 1000 char long data in Table
Here you will divide the data of Variable (type char1024) in multiples of 200 and will store in REMARK1, REMARK2.....
zget_data: To Get 1000 char long data back from Table
Here you will concatenate REMARK1, REMARK2..... and will store in Variable of Type char1024.
This is the best solution if Table is not going to be maintained by Table Maintenance Generator.
Thanks
Ajay -
Table field more than 255 characters long
Dear Experts,
I want to create a table field more than 255 chars long
It will be possible through LCHR or LRAW but incase it field contists of data less 255 chars it will result in loss of data.
Plz helpHi,
if you want to create a table field more than 255 chars
then possiable with lchr But you got one warning out put length accepted 255 characters only .
for example .
if you created one field z_name in z table with LCHR AND LENGHT MORE THAN 255 CHARS THEN
U GET ONE WARNING
I.E
Output length (300) larger than maximum output length (255) in screens
Message no. DO269.
Regards ,
sankar
Edited by: bhavanisankar.solasu on Dec 29, 2010 8:32 AM -
More than 255 characters in a table text field
Dear experts,
i am facing a problem (in WD Alv too) that i can not display more than 255 characters in a single text field.
I want to display a table containing a description field without a limitation of its length. As soon as providing a (formatted) string longer than 255 characters of length, no interactive form is shown on screen.
Debugging a while, the following error message occurs;
ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: XMLFM Exception - PDF render operation exception, reason code: 0 : InvalidXDPException: Xml parsing error: reference to invalid character number (error code 14) ...
Does anybody have similar problems to mine?
Did anyone resolve the issue to show more than 255 characters in a table in interactive form?
Regards,
Florian Royer
Edited by: Florian Royer on Feb 11, 2010 2:48 PMCALL METHOD lr_service_manager->retrieve
EXPORTING
iv_bo_name = 'cPro_Project' "lv_bo_name "cPro_Project
* iv_bo_name = cl_dpr_api_co=>sc_bo_cprojects "
iv_bo_node_name = 'Longtext.Root' "lv_bo_node_name "Longtext.Root
it_keys = lt_ltext_key
iv_edit_mode = '0' "iv_edit_mode "0
IMPORTING
et_data = lt_longtext_mast
et_failed_keys = lt_ltext_key_fail.
READ TABLE lt_longtext_mast INTO ls_longtext_mast INDEX 1.
MOVE ls_longtext_mast-longtext TO ls_action_item-zz_description.
This is how i get the text with format (line feeds).
zz_description is type string.
My table is on a page, wrapped in a subform. and zz_description is type text field.
Yes, i maintained "allow multiple lines" and did not limit length somehow.
The problem arises in portal, pressing the preview button of a zform. providing a string <255 characters of length, everything works fine.
Edited by: Florian Royer on Feb 11, 2010 3:10 PM -
SQ01 Output fields having more than 255 characters
Hello,
I need to show query output more than 255 charaters but system is not allowing
Here is the Error message:
List is wider than 255 characters (generation not possible)
I used SQ01 as t-code to create query.
How can i show my output more than 255 characters
ThanksRefer SAP Note 857823, ALV grid cannot display more than 128 characters per field and will truncate all the characters beyond if it's an ABAP program
From my experience it will not display the field at all in SQ01.
You need to write an abap program and split the field into two fields of length 128 and display side by side.
Work around: If you cannot write abap program uncheck (no display in query) that field in SQ02 and generate it. Execute your query and copy the key field use se16n to input in the key fields and use import to excel sheet function to get the required data. -
creating form - want to adjust font style and size in more than one field at a time - HOW??
Select the fields with the mouse, right-click one of them, go to Properties
and set the settings you'd like them all to have.
On Wed, Jan 21, 2015 at 8:51 PM, chuckm38840797 <[email protected]> -
How to accomodate more than 255 characters in character field
HI All
i need to accomodate more than 255 characters in character field. How can i do that ?
thanks in advance!!!Hi,
You can try the following things:
1. Use a datatype STRING and check it will work.
2. In se11 transaction goto datatype and search for char* in data elements.
You will find predefined data types ,you can make use of it.
For eg. char2000,char3000,char4000 etc.
Hope this will help.
Regards,
Nitin. -
Display more than 255 characters in SAP 4.6c version.
Hi
Can anyone tell me how to display more than 255 characters in the spool log of sap or the application server?
Thanks in advance.
GeetaHi,
You have to have some patch.Pls refer to SAP oss notes 626010.
Pls reward if useful.
Sushil. -
ABAP Programming to display more than 255 characters in the screen
Hi
I want to display more than 255 characters in the screen after executing a report but i cant able to do that.
Please help me to find out the solution.
Thanks
Mrutyunjaya TrpathyHai tripathy,
when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain upto 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1.REUSE_ALV_VARIANT_DEFAULT_GET
2.REUSE_ALV_VARIANT_F4
3.REUSE_ALV_VARIANT_EXISTENCE
4.REUSE_ALV_EVENTS_GET
5.REUSE_ALV_COMMENTARY_WRITE
6.REUSE_ALV_FIELDCATALOG_MERGE
7.REUSE_ALV_LIST_DISPLAY
8.REUSE_ALV_GRID_DISPLAY
9.REUSE_ALV_POPUP_TO_SELECT
hope u can try in this way.
REGARDS,
PRABA. -
Display more than 255 charecters in alv grid
Hi,
I am trying to display the more than 255 harvesters in alv grid(Editable alv). But it is accepting 255 characters only. actually my string length is 2048 (file path).
How to display the more than 255 characters sting in alv grid. If any one know this please provide that logic.Hi,
Check this also
REUSE_ALV_GRID_DISPLAY maximum length
Re: how to display the data in the alv layout more than 255 characters
Maybe you are looking for
-
HT4859 I restored my iphone 5 from my iphone 4s, and my iphone 5 looks like a ihpone 4s?
Hi, I just backup my old Iphone 4s and restore my new iphone 5 And now the screen of my iphone 5 looks like a iphone 4s, i can only have 4 icon in my page instead of 5 anyone know how i can fix this ?
-
Make google.co.uk default in search box in safari
I was hoping that by version 4 of safari we really should be able to change the search engine in the search box. I am happy with it searching google but it searches google.com not google.co.uk! This is such a simple thing, but leaves anyone outside o
-
Hi I'm looking for a tutorial that will help me use the "functions" in NUMBERS so that I can understand them. I have made up a spreadsheet and it has "Checkbox's in it" and I would like to add up the number of ticks and get a NUMBER for the amount of
-
ADF application deployment and Data source configuration
Hi, we are developing an adf application . This app accessing the tables from a data base and i can run it in the integrated WLS of Jdeveloper. Now i would like to run it in a standalone WLS server. I can create a Data source in the server. How can i
-
Azure connections drop exactly at the same time everyday.
Hi Guys, I wonder why all my connections to email server and NOC portal gets disconnected at the same time everyday. The connection drops and my retry logic would not get the connection back. However, the connection will be re-established after a whi