A full development version of labview required to fix the errors.

When i tried to run my exe file, it gives following error.
"A subvi is not executeable.A full development version of labview required to fix the errors."
i do have full version of 6.02.
Am i missing something something when i built exe?
any Help will be appreciated.

Well, here we go again...
I have seen this error way too many times in my day.
The problem is you have a bad linkage, or unsaved or compiled VI in your hierarchy when you built the application.
Open your main, or otherwise open (into memory) ALL VIs in your hierarchy. Then, do a save all from the file menu. This should solve the issue.
The other reason I have seen this is if you have bad linkage. As there is no real way to tell what your linkage is, you need to go into the hierarchy, select View Full Path in Title and make sure everything is where you think it is. I have often seen this occur even when the application I was building from was in perfect condition. Often times, when the app builder is used, VIs will be called from locations you
don't expect.
You have to be VERY careful about developing in a hierarchy. I actually got to a point where I had to even place all the NI VIs into my directory structure.
Take a careful look at the hierarchy. Chances are the executable is calling the wrong code, or is compiling with the wrong version.
If in doubt, go to a fresh machine, and move all of your VIs (individually if you have to, or as a .llb preferably) to the new machine and build it from there. Alternatively, you can try doing a save as from your main and select "application distribution" this will resolve any issue with VI locations, except where Dynamic VIs are being used.
Good luck, 'cause you are going to need it.

Similar Messages

  • I recieve the following error when running an executable ("This VI is not Executable. The full development version of Labview is required to fix the errors"

    I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
    I have the professional development system
    I can run the main VI
    all the required DLL's are in the dependencies section of the project window.
    I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
    Thanks in advance to all labview users for your help
    Attachments:
    project window.PNG ‏36 KB

    other PNG
    Attachments:
    Broken Arrow on EXE.PNG ‏179 KB

  • "VI has error of type 1002288.The full development version of LabVIEW is required to fix the errors"

    Hi,
    I had created an executable in LabVIEW 8.6 on a windows XP 32 bit PC. The application uses some Vision VIs. The executable runs in most of the PCs except one. the PC is a windows 7 64bit. Initially i got the error "Labview Load error code 3: could not load front panel". I fixed this by changing the source file settings in the application builder. Now i am getting the error "VI has error of type 1002288.The full development version of LabVIEW is required to fix the errors" and the exe shows a broken run button.
    But if i build the exe in the same PC i get no errors and it works fine. Moreover i have tested this exe in a different PC with the same configuration, it works there. I have tried reinstalling labview in the PC the problem still persists.
    Solved!
    Go to Solution.

    Hi Rajshekar.
    > Which version of LabVIEW are you using on PC with Win7 64bit? would like to check if there are any issues with LV2009 32bit on 64bit OS..
          - The version of Labview on the win7 64bit PC is also lv8.6 full development system.
    > Do you get the same error on the other PC with same config(Win7) when running the .exe generated using LV 8.6 on WinXP 32bit? just to make sure the problem is with OS or LV..
          - the same problem occured at one more PC with the same configuration. but when i tested in an another PC of the same config it worked i am not able to isolate and decide that the error is based on one particular PC config.
    I have listed the environments in which application ran and how the application was put in to the PC.
    I would also like you to know that i have created an installer for the exe. I am also using NI vision in my application and this is the error "An error occured loading VI 'IMAQ GetImagePixelPtr'. LabVIEW load error code 3: could not load front panel"....and rest is what i said in my previous post
    1. Use the installer to install the application.
    2. just copy the exe created in LV 8.6 into a PC that already has LV development system installed in it
    3. The PCs might either be a blank one with no history of LV installed in them
    4. The PCs might have diffrent versions of LV development systems installed in them (8.2,8.5,8.6,2009)
    All PCs that have LV development system(s) installed in them, was able to run the application except the one with win7 64, where i have tried uninstalling all NI software and use only the installer to install, install LV 8.6 full development system and try runnning the exe, nothing works.
    Thanks

  • Please help suggestions for solving built-only compiler error: 'The VI is not executable. The full development version of LabView is required tofix this error.'

    We have develoepd a software tool and build it on regular basis. It currently runs error free when compiled in the editor, but when we built it and run the executable stand alone we get the error.
    'The VI is not executable. The full development version of LabView is required tofix this error.' plus a broeken error.
    This menas an compiler error that is not present in the editor but in the stand alone version. We tried to identify errors as suggested in several posts in this forum, but so far unsuccesfull.
    As the editor and its compiler do not see the error  and are running fine and the stand alone version just syas 'find the error in the editor' in this case LabView is of no help.
    Can anyone suggest a sensible or 'good practice ' way of searching for the source of this error?
    Our project  comprises hundreds of Vis over several libraries.
    Thanks,
    Chris

    Thanks Craig for all your suggestions.
    We seem to have located the problem in a new vi just added to the package causing conflicts by using the same vi names as other vis already present in the package. Excluding this vi removed the error.
    It seems related to a conflict by having two vis with the same name, which was mentioned by LabView and interactively resolved when running the main vi from the editor. When successfully building the main vi the builder did not mention this conflict and reported a successful build, but when trying to run the executable it gave the cryptic error. The error caused us problems because there was no hint for the cause, just the suggestion to solve this in the editor, while at the same time in the editor the VI was running fine.
    We will post about this in detail after we have positively proven that this actually was the case.
    The .net version issue was already checked.
    Performance was the same on all machines we tested on including the dev machine.
    Debugging was tried nut did not help as the vi could not run (broken arrow). We assumed that debugging only helps in running faulty functioning vi''s. We did not check for broken arrows in sub-vis (after connecting), that could have helped, although our application has hundreds of our own vis.
    In relation to your remark: 
    'Are you using many classes? Have you verified that the proper access scopes are set for functions calling those vis?'
    Could you elaborate on setting access scopes. We were not aware of this option in LabView, although we realize this is a basic element of the underlying c code.
    Ragrds,
    Chris

  • The VI is not executable. The full development version...

    "The VI is not executable. The full development version of LabVIEW is required to fix the errors." That is the error I've been dealing with all day. Actually it is repeated 3 to 4 times in the error message, seen when first launching the EXE. Also of note is that the run-arrow is broken. This is in an EXE that was developed well before version 2013, but I recently upgraded it to 2013 to hopefully fix some random LVRT crashes. There is obviously no issue running the code on my development machine, only once it's deployed.
    The good news is I've been able to solve the problem (mostly). My EXE now runs without the errors. I found that the problem wasn't actually in the EXE.
    We have a separate project with no files, but in the build specification we have the LabVIEW 2013 Run-Time Engine, as well as NI-VISA for serial support. We then bundle the deployment in a self-extracting RAR and it does its business. In the past this has worked just fine, but with LV2013, it seems that there is a component missing from the deployment.
    I found that if I download the Run-Time Engine directly from NI.com and run it, the only things I need to install are the Run-Time Engine, and the DEPLOYABLE LICENSE. If I do this, my EXE runs great, but with the custom installer, it is not included for some reason!
    Putting aside the fact that I don't know why the Deployable License package is needed (we aren't connecting to remote panels), I can't seem to modify my custom installer to install the Deployable License. There are versions for LabVIEW 2009 and 2011 SP1 in the Additional Installers list, but I don't see 2013.
    Can anyone explain why this is??? For now I will just distribute the 257MB Run-Time Engine and the NI-VISA installers separately I guess. But I'd really like to get back to a single, simple package to install all the prerequisites we need. HELP!

    iannicholson wrote:
    Yes, but then every installer I build will contain the runtime engine. That gets very large very quick. So I have an installer for JUST the runtime engine and VISA runtime.
    Just remove them from the "Additional Installers" tab of the Installer dialog.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • After updating ADE to version 2.0 I am getting the error message 'code E_AUTH_NOT_READY'

    after updating ADE to version 2.0 I am getting the error message 'code E_AUTH_NOT_READY' when trying to authorize my computer (Adobe Id is correct, password I have refreshed, but ..) what to do?
    Running ADE on WinXP with recent SP
    ===> use CTRL-SHIFT-D in ADE to de-authorize and then re-authorize vial Help-Menu

    yes, I agree with what you say: the note '==> ...' is the solution to
    my problem, found it after some time in another thread  
         regards
         Von: sjpt <[email protected]>
         An: zwergenerv <[email protected]>
         Betreff: after updating ADE to version 2.0 I
    am getting the error message 'code E_AUTH_NOT_READY'
         Datum: Mon, 23 Sep 2013 10:59:41 +0200
    RE: AFTER UPDATING ADE TO VERSION 2.0 I AM GETTING THE ERROR MESSAGE
    'CODE E_AUTH_NOT_READY'
      created by sjpt in Adobe Digital Editions - View the full
    discussion

  • When trying to install the latest version of iTunes, I keep receiving the error message "Cannot install due to insufficient privileges, logon as administrator". I am absolutelutely logged on as the administrator.  Help!!

    When trying to install the latest version of iTunes, I keep receiving the error message "Cannot install due to insufficient privileges, logon as administrator". I am absolutelutely logged on as the administrator.  Help!!

    Don't know if this will you but i fixed my issues with upgrading to 10.5.3.3 on Windows 7 you can access the steps i took here with an explanation of the problems i was having.  https://discussions.apple.com/message/17374864#17374864

  • Hi, I updated my version of iTunes and now get the error "The program can't start because MSVCR80.dll is missing from your computer".

    Hi, I hope some one can help as I updated my version of iTunes and now get the error "The program can't start because MSVCR80.dll is missing from your computer". I understand that I need to delete and reinstall iTunes but all of my music has been uploaded from CD's and I'd like to know if these are safe if I delete iTunes of if they too will be deleted. I have over 1300 songs so this is a big question for me.  Many thanks.

    Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.)
    First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
    http://www.apple.com/itunes/download/
    If you still get the errors after that, try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Difference between Runtime version and Developer version of LabVIEW.

    What is Version  of LabVIEW called Runtime engine?
    Is it only for viewing VIs built in LabVIEW developer version?
    Can't we develope or edit VIs in RTE version of LabVIEW?

    vaibhavinegi wrote:
    What is Version  of LabVIEW called Runtime engine?
    There is a seperate Runtime version for every release of LabVIEW.  You can open up NI MAX and expand software to see what is installed in your computer.
    Is it only for viewing VIs built in LabVIEW developer version?
    Without the development environment, you cannot edit LabVIEW VIs.  The Runtime Engine is responsible for actually running the code so you can build LabVIEW programs into executables and run them on other machines without the development environment.
    Can't we develope or edit VIs in RTE version of LabVIEW?
    No

  • I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messages. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles. Any idea how to fix the problem?

    I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messaes. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles (but with the network provider name). I checked with my colleagues in the office who use the same network and theirs work just fine on iOS7. Any idea how to fix the problem?

    I have also called my service provider and my service remains active in the network. I tried removing and reinserting my SIM but to no avail.

  • When I compile the cpp examples off version 3.7.1 I met the error

    the error was:
    -bash-3.00$ ./build common
    building shared library common/libcommon.so ...
    common/ContactInfo.cpp:
    common/ContactInfoSerializer.cpp:
    "../include/coherence/lang/abstract_spec.hpp", line 96: Error, nomatchoverin: Could not find a match for coherence::lang::class_spec<coherence::lang::AbstractTypedClass<coherence::lang::Managed<ContactInfo>>, coherence::lang::extends<coherence::lang::Class, coherence::lang::Void<coherence::lang::Object>>, coherence::lang::implements<void, void, void, void, void, void, void, void, void, void, void, void, void, void, void, void>>::class_spec(const std::type_info) needed in coherence::lang::abstract_spec<coherence::lang::AbstractTypedClass<coherence::lang::Managed<ContactInfo>>, coherence::lang::extends<coherence::lang::Class, coherence::lang::Void<coherence::lang::Object>>, coherence::lang::implements<void, void, void, void, void, void, void, void, void, void, void, void, void, void, void, void>>::abstract_spec<std::type_info>(const std::type_info&).
    "../include/coherence/lang/lang_spec.hpp", line 427: Error, badinittype: Cannot use int to initialize coherence::lang::TypedClass<coherence::lang::Managed<ContactInfo>>*.
    2 Error(s) detected.
    my platform as follows:
    bash-3.00$ uname -a
    SunOS t5240 5.10 Generic_138888-03 sun4v sparc SUNW,T5240
    who can help me??

    Hi user 929476,
    Can you provide the exact compiler version and patch number you are using, and ensure that it is at least SunPro 5.9 124863-14 for SPARC for 124864-14 for x86/x64, which are the minimum supported versions on Solaris (see http://docs.oracle.com/cd/E24290_01/coh.371/e22839/gs_install.htm#BABDCDFG). Also please let us know if you've made any changes to the provided examples.
    Mark
    Oracle Coherence

  • IPhone 5 storage completely full and can't figure out to fix the problem?

    I got the iPhone 5c in August of last year. Previously, I had owned a flip-phone and only a flip-phone, so you can imagine that it was a big change. Though I know there is so much more that it can do (and so many things I have yet to discover), I mostly appreciated the phone for its photo and Internet capabilities. Only a few weeks after I got the phone, I went to a concert and, as you can imagine, the videos took up a lot of space on my phone. I also have a bad problem with saving screenshots, so I quickly filled up space with pictures. Once I realized it was reaching an overwhelming amount (and space was getting limited), I backed-up my iPhone to iTunes on my computer and deleted around 800 pictures. It barely freed up any space. I did this once or twice until one time I tried backing it up again and it would not let me, saying that there was not enough space to do the back-up. I don't quite know how that works, but after that, I just ignored my problem. Well, then my space was dwindling down close to zero. I deleted most of my apps, though it did not free up much at all because 11.4 GB of my 13.2 GB phone is from Photos/Videos.
    My phone reached 0 bytes available in, I'm guessing, November of last year? To my surprise, I could still use some of the features on my phone. Internet, screenshotting (though I could no longer take pictures), and some of the apps (though they often would not load fully). This didn't last for long. One day, I wasn't able to open hardly any of my apps. Then it transitioned to my Internet closing out of itself every now-and-then. Well, currently (and I've been having these problems consistently for the past month or so), I can not open any apps. If I try to go to a website, it closes out of itself almost every single time. I never know if my texts go through because it never finishes the sending process (sometimes people say they get them, sometimes they don't). I cannot receive texts. I can't even try to delete my photos/videos because when I click "delete", it goes to my Home Screen (again, it closes out of itself) and when I check, the pictures/videos are still there. For the past month or so, the only thing my phone can do is call. Which, you know, defeats the purpose of an iPhone. Basically, I have gotten myself into quite a conundrum.
    Is there a solution to my problem that does not involve restoring it to factory settings?

    Thank you for your reply! I just tried importing my pictures again. iTunes gave me the same message - that the storage was too full. I looked under summary, and I don't quite exactly know what usage numbers you are looking for, but it does say it is over capacity by 190.8 MB. However, when I plugged in my phone to the computer, it started to import pictures automatically into Dropbox. I just recently got Dropbox, so I did not have it the other times I tried to import. I managed to get the pictures onto my computer and, by some miracle, was able to delete a couple hundred from my phone. It also let me delete the long videos on my phone, which I've been trying to do for months. I went to my Storage and it now says I have 6.6 GB free (which was so amazing to see that I had to take a moment). I can take pictures now. I quickly updated a few apps and the space is still good. However, there are some apps that it still will not open (as in I open it up, then one second later it closes out). These seem to be the social media apps-- Twitter, Instagram, Facebook. Should I just delete them, then re-download? That will not mess anything up, correct? So far, Safari is working, which is a major relief.
    How would I go about syncing things like contacts?

  • Pointers require to debug the error while generating PO from accepted bid

    Hi
    I am getting error when PO is generated from accepted bid.
    I want some pointers to debug this problem.
    Regards
    Pooja

    Hi
    Pls see the following thread.
    Error in Generating PO from accepted bid
    Regards
    Ashish

  • What was required to fix the RSD?

    Hi, I got my Macbook in August, and within a week of buying it, I had to send it in to get the RSD problem fixed.
    It was listed that the logic board was replced.
    Now, in October, it has started again, once yesterday, once today....grrr....
    I was wondering if anyone knows what needs to be replaced to fix the RSD problem.
    Thanks..

    Mine was repaired recently. It had the heatsink only replaced (not the logic board). The service from APple , I must say was exceptionally excellent. I turned it in to my local store and had it back in under 24 hrs. The cost of the part was listed at under $15 and the labor at under $140.
    The genius told me that "Apple had just decided that the heatsink , not the sink lobo combo was the problem"; I didn't see the part he replaced.
    I DID ask him about the "melted wire" theory - he said he'd repaired several machines with RSD and had not seen th emelted wire........
    good luck with your machine
    Grant

  • Error 22A8 "Error requires full development system to be fixed"

    Hello, I have successfully built my application with the application builder. The application is a plug-in architecture where I have paths to different .lvclass files internally in the .exe file which I have set to "always included" in the build. The different classes will be loaded dynamically
    When I run the executable on my development machine it start up and everything works fine. But when I want to run in on another machine with only the LV runtime installed I get the following error:
    Error 22A8 "Error requires full development system to be fixed"
    How is that? anyone know what that mean? I don't find much information about this when I search on the internet so i'm kinda stuck now. Im using LV 2011 sp1.
    Best regards
    Thomas

    Hi,
    What is the runtime engine that you installed in the other computer? Does that computer have any LabVIEW installed as well?
    May i have a screenshot of that error code again? I don't think the is such an error link error 22A8. 
    If you want to create an application (.exe) which is to be run on a computer that does not have any NI software installed. I suggest that you create an installer not an executable. You can build an installer using application builder. What it does is that it includes not only runtime engine but also other addons which is required due to the toolkits you may have used in your code. 
    You can learn about creating installers here:
    http://www.youtube.com/watch?v=V_NsSOVx3wc
    If the error still comes out, you can refer to the other discussions with the similar error message as yours:
    http://digital.ni.com/public.nsf/allkb/F715F1ED66878F8E862574F8006AD6A1
    http://www.ni.com/white-paper/13164/en/#212136_by_Category
    http://forums.ni.com/t5/LabVIEW/A-full-development-version-of-labview-required-to-fix-the-errors/m-p...
    Warmest regards,
    Lennard.C
    Learning new things everyday...

Maybe you are looking for

  • Open a SAPGUI transaction from a Java web application

    Hi all,    We are in the process of developing a Java based web application with SAP J2EE engine - but not SAP Enterprise Portal. One of the requirements we have is from one of the web screens there needs to be a button which launches SAPGUI and take

  • Using cDAQ timers to repeat a hardware-timed finite-sample pulse train clock

    Hi all, As part of a complex project, I must implement an acquisition hardware interface for a linear motion sensor using the Synchronous Serial Interface (SSI) output common in industrial motion control. (I have a fair bit of experience in digital e

  • Serial code

    so basically i lost my ipod at school i was careless and it fell out of my pocket i checked lost and found but who would return an ipod video? there's no way that i can use the serial number to make it so that if anyone else tries to register it then

  • How to select more than one node in tree

    Hi plz any one know how to select multi nodes in tree components ?? i wana select two employees or more from tree in order to know their informations how can i do that 10nx for help

  • Missing OS and Applications DVDs

    I purchased my MacBook white from a retailer, it did not come with the OS and applications DVDs. How can I get a copy of them? TIA, Damron