A good Flash E Commerce solution for AS2 and 3.0
I have a client who will want an e commerce area for his site. Does anyone recommend a good Flash based program out there that will allow you to constuct an e commerce solution in both AS 2 or 3 . I know that is a lot to ask for but at this point I really need something that will not break my budget, I can use easily multiple times with different looks .
rded
the only difficult part is the back-end securing transactions. you can off-load that responsibility to a third party like paypal and make your own custom shopping site.
Similar Messages
-
Good/robust/high performance solution for calling Java from C
Hi,
I am looking for a good/robust/high performance solution for invoking a local java component from a C application in Windows.
About Java component:
- It has multiple methods that would be called very frequently from C application
- It will reside in local machine. This machine may not have access to internet/LAN.
My preference is to implement this java component as indepent running exe and have C application make outprocess calls. Is this possible?
Any help/suggestions on this are greatly appreciated
Thanks,
-ArunI will stop replying to this conversation, unless it
remains professional and without getting personal.I suggest you read your replies again then since you were the one that strayed from the topic and referred to my competency.
>
Or conversely those that have been working with JNIfor close to 10 years >might have a different opinion
that someone who is promoting a commercial >product?
I cannot see anything wrong with sharing and letting
people know of potential solutions that might help to
solve their problems.Not a problem at all.
You however stated an absolute. I asked you to back up that absolute with something that was objective.
You then lashed out at me and questioned my competency.
>
So you are questioning my competence as well as myintent?
And not bothering to address the question at all.
I am guessing you haven't actually attempted tocompare JNI to on board >sockets but instead you are
just guessing.
Frankly, I don't see how a socket solution with
process switching overhead is going to work faster
than a direct method call, passing parameters over
the stack, the whole operation taking place
in-process.
And thus, as I thought, you haven't actually attempted to compare the two.
And in terms of competency I can only wonder if youare competent enough
to write the test frameworks that would demonstrateone or the other.
As said earlier, there is no need to get personal,
let's keep professional!
And as I said earlier I would suggest that you look to your own replies.
As mentioned, I do have enough experience for those
who need to interoperate with Java using JNI, and can
show how to do it in a safe and productive manner.
And as I have said for the third time now that has nothing to do with what I actually asked you.
The code that someone writes via JNI has much lessusage, and thus is much >more likely to have
problems. Even if someone is competent in creating
JNI >and C code.
Thus JNI Is less stable.
And by the way that includes the commercial productthat you are promoting >as well.
Expressing an opinion on a product just based on its
underlying technology without proper evaluation
doesn't sound like constructive criticism.
So you are claiming that your product is in fact more stable than the VM or at least as stable even though it has had far, far less usage?
The only thing that can be said about the product so
far, it that a product that is in production for some
years without any problems, has a certain level of
reliability and quality, whatever the underlying
technology might be, and that there is enough
competency with JNI to produce it and advice about
the technology.
True. But you were the one that brought up unrelated issues and then, as best as I can tell, thought to challenge my knowledge by pointing out how VMs "really" work. -
Unbelievable no solution for FMS3 and FLVPlayback???
I've spent the past 2 days scouring Google and dozens (easily over 100) websites
trying to find an answer to something that people do every day!
I am absolutely shocked that this info is not available anywhere online.
A simple FMS3 and AS3 and RTMP and FLVPlayback example....
totaly not simple and not possible to find!!
I try every possible combination:
import fl.video.*;
VideoPlayer.iNCManagerClass = fl.video.NCManagerNative;
myVideo.autoPlay = true;
myVideo.isLive = true;
myVideo.isLive = false;
myVideo.source = "rtmp://localhost/appName/videos/flvName.flv";
myVideo.source = "rtmp://localhost/appName/streams/flvName.flv";
myVideo.source = "rtmp://localhost/appName/streams/videos/flvName.flv";
myVideo.source = "rtmp://localhost/appName/flvName.flv";
none is working!!
i did not find any working simple solution for:
FMS3 and AS3 and RTMP and FLVPlayback
anywere on the web
only for:
FMS3 and AS3 and RTMP and Video and NetStream
if someone could bring "salvation" to this required important issue
i will be so thankfull
cheinanJanaki L thanks a lot for your replay
i think i know where the problam come from
its from point number 8 in your raplay:
8. Make sure you have a publisher connected to your 'server' using the 'appname'
and streaming a live stream with the name 'streamname'
I thought i do not need a publisher to be connected to my appname in my server.
i thought FLVPlayback is doing the netConnection and start streaming the flv
that are already published and sitting on the server.
Is it not possible for the user that use swf with the FLVPlayback to make a netConnection
by ac3 code or some other wey and the FLVPlayback will use that connection to play the flv for that user
without third party connected publisher?
If not - maybe i can use HTTP to let the FLVPlayback play the flv for the user
but that bring me to other problem:
my localhost is at:
C:\inetpub\wwwroot\
the flv is at:
C:\Program Files (x86)\Adobe\Flash Media Server 3.5\applications\appName\streams\videos\flvName.flv
what will be the http url for the flv? -
Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.Consider MS System Center 2012.
Rgds -
Good Morning, I'm all for updates and maintaining, but I'm upset that Googletoolbar is no longer compatible with Mozilla 5 because I had a great amount of sites saved on Google Bookmark and now it is lost. Any suggestions?
Hi userwhat,
Your personal data should have been saved, and you can try to follow these steps to fix your problem.
*First, you should report that to the developer of the add-on the troubles that you are experiencing.
* Then, you can try [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ The Add-on Compatibility Reporter], which allows you to use add-ons that haven't yet been explicitly updated to work with Firefox 5, and lets you report the results of compatibility.
* For add-ons that do not work with The Add-on Compatibility Reporter, you can still downgrade to the previously maintained version, which is Firefox 3.6 that you can download here: [http://www.mozilla.com/en-US/firefox/all-older.html http://www.mozilla.com/en-US/firefox/all-older.html] -
Good Morning, I'm all for updates and maintaining, but I'm upset that Googletoolbar is no longer compatible with Mozilla 5 because I had a great amount of sites saved on Google Bookmark and now it is lost. Any suggestions?
Hi userwhat,
Your personal data should have been saved, and you can try to follow these steps to fix your problem.
*First, you should report that to the developer of the add-on the troubles that you are experiencing.
* Then, you can try [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ The Add-on Compatibility Reporter], which allows you to use add-ons that haven't yet been explicitly updated to work with Firefox 5, and lets you report the results of compatibility.
* For add-ons that do not work with The Add-on Compatibility Reporter, you can still downgrade to the previously maintained version, which is Firefox 3.6 that you can download here: [http://www.mozilla.com/en-US/firefox/all-older.html http://www.mozilla.com/en-US/firefox/all-older.html] -
Flash Builder 4.5 for PHP and ANT
I just installed Flash Builder 4.5 for PHP Premium and I am trying to install ANT so I can automate the AsDoc generation process.
In the past (Flash Builder 4), I just point to "http://download.eclipse.org/releases/galileo/" and select "Eclipse Java Development Tools".
However, when I do the same in " Flash Builder 4.5 for PHP Premium", I got an error message saying that a newer version of "Eclipse Java Development Tools" has already been installed. I go to the "Already Installed Software" tab, and indeed I see "Eclipse Java Development Tools" under "Eclipse Java IDE", but ANT is nowhere to be found.
By the way, I am doing everything on the stock, standalone Flash Builder 4.5 for PHP Premium.
Any suggestion is much appreciated.I also have Flash Builder 4.5 for PHP and the ANT view does not show when going to Window -> Show View --> Other. I could not find it in any of the folders.
However, I was able to add it by hitting Command 3 (CTRL 3 on PC) and typing Ant. -
Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas
Hello Experts,
Pl advise if we have Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas.?
Any link or material for reading, please let me know.
Background - We are working on the scope to finalise processes for Small And Medium Co's for Downstream business in ECC 6.0.
Also advise how many and what kind of processes are involved related to P2P, Order to Cash and Finance.
Regards
Vinod ChincholkarHi Vinod,
i hope you can find the details in this link,
you can download the sloution overview brochure...
http://www.sap.com/industries/oil-gas/small/index.epx.
Best Regards
Satish -
Annoture - Metadata Bridging Solution for Aperture and iView
Aperture and iView users:
I just released Annoture, a metadata bridging solution for Aperture and iView MediaPro! With Annoture, you’re just a click away from sharing metadata between these two popular image management and cataloguing applications. Spend more time working with your decisive moments than worrying about double-entry and incomplete metadata!
Annoture lets you transfer annotations from iView MediaPro catalogs to Aperture projects and albums and back. This two-way transfer of IPTC and metadata information means you are not tied to any one application for your image management and workflow needs. Annoture also features a modular interface that can be extended to support additional applications in the future.
http://www.tow.com/software/annoture/
Users of Aperture and iView can download a fully-functional version of Annoture. The unregistered version will occasionally display a reminder to register, and all images processed in Aperture by Annoture will have a custom “Annotated with Annoture!” tag added. You can remove these items with the full version after purchasing and entering your license code.
Enjoy!
-adamCongratulations on getting this working and available so quickly! I bet many late nights went into this
It's definitely providing some motivation for me to learn more Applescript... -
How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance in Brasil. Of a sledgehammer, open the device and attempt to recover your files by force!???
Heat up the bottom rubber mat with a hairdryer for 5-10 minutes to loosen the adhesive, then pull the rubber mat away from the bottom metal plate carefully.
Then use a screwdriver to remove the 10-12 screws to open up the case. -
New iMac. Flash drive is primary for OS and apps. I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files. Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?
Yes. Unfortunately, I don't know the specifics because I don't use iPhoto anymore and I completely copied over 15 years of MP3 files recently when I installed 10.7. Needless to say, I have not opened iTunes since and probably never will again - not because of iTunes but because of my stupidity. I did have some of the files backed up but I hadn't backed up in a while.......anyway....
When I imported my CD's, I had them go directly to my external firewire. I can't remember exactly how to set it, but in the preference section of iTunes you can specify an import destination to any drive that's available to your machine. I did this with iPhoto as well way back at one point when I was using Tiger, but I don't remember the specifics on that either. I can't imagine they would have discontinued support for that feature since then.
Sorry I couldn't help more. -
Know any Good Flash Training DVD's For Sale?
Hi, I am looking to purchase some good flash training videos
for building sites and animation. I was wondering if anyone could
recommend any.
ThanksIt may be more practical to get a membership to lynda.com or
totaltraining.com. We have found software updates are frequent and
the membership allows us to keep up with new versions. Our old
"videos" sit on shelves and the cost of a few DVD's was alot more
than one year membership to one of these services. -
Pls help putting together the BEST SOLUTION for PP and AE CS4
Hi guys
I was tasked to put together the best machine (machines) for video editing / rendering .. money is not an issue.
My client is a TV broadcasting network and they do lots of videos everyday .. They want to render their work as FAST as possible because sometimes they have tight deadlines and rendering and re rendering (if there are mistakes) has cost them .. so now they're serious about getting the best technology to achieve best rendering time possible, but in a bit of practical sense of course.. i mean there's no sense spending 1000USD or more for a piece of technology that offers under 10 second faster rendering only ..
What they do and want
- edit/put together/ sequence lots of videos constantly, under premiere cs3 (will upgrade to cs4 on the new machine)
- use affter effects for some effects and 3D stuffs.. but not that much.. but increasingly as time goes by and their video editors get more affter effects training..
- needs really really fast rendering!! Right now it takes them typically 1-2 hours to render stuffs, and what to cut this time by half or more..
Existing Setups on work stations:
Intel QuadCore (Q6600, i7, Q9550, Xeon x3220, and the likes)
4GB RAM DDR2 1066mhz
Highend motherboards
GeForce 9500GT , 9800GT, and GTX 260 216sp
GSKILL Falcon 64GB SSD Drive as primary
1TB Western Digital BLACK edition drives for storage
Software:
Windows XP 32 bit
Adobe Premiere Pro CS3 (80% of all their work done here)
AE CS3
etc..
Running NOD32 Antivirus
I am an somewhat of an expert in Hardware and stuff, i build custom PC's machines most of my life but i have limiited knowledge on optimizing hardware for VIDEO EDITING stuffs.. so i turn to you all.
I do understand that w/ video editing CPU is the most important, followed by RAM, and ofcourse by HDD for disc caches and stuff.. and where videocard may come to an advantage as well. and normally i'd suggest the fastest components available . i7 , extreme processors, skulltrail dual quad setups perhaps? RAID 0 SSD Drive? etc.. but I do not know w/c gives the most advantage, and w/c is a waste of money..
I also read about quadro cards offering really big performance improvements using CUDA tech etc..
again im not the expert at this type of requirment.. so i need your advises..
with unlimitted PRACTICAL budget given to me to come up w/ a solution I initially thought a rendering farm would be the solution, but upon reading around it seems there's no rendering farm solution for PP CS4.. just the adobe after effects part.. so i had to go back to the drawing board and suggest really powerful work stations instead..and perhaps have them migrate to 64bit OS for that "extra" performance.. i myself am on win7 64bit and it's looking mighty good.
1) is this the right move?
2) is it still worth it to put together rendering farm for AE renders only? or might as well concentrate funds on the machines/workstations?
Also along the PRACTICALITY LINE, would it be practical to maintain all the existing machines, and instead build a manned RENDERING MACHINE w/ PP and AE (basically desktop or Server if they are faster at rendering w/ the best specs for the purpose etc) where they can just throw the workload to some guy there for rendering? Atleast the editors can continue using the workstations while the rendering machine guy is at work? and even perhaps setup a gigabit lan network where the RENDERING MACHINES can dynamically pull the work load via the network , not needing to transfer the files to the rendering machine first ? etc
as you can see im not only looking for the best machine, but the best STRATEGY for my client.
Good suggestions would be much appreciated.
regards to allin a nut shell no. if you do not have to "Share" then Avid is pointless Adobe is a far better answer.
Avid solutions still need a computer. The Mojo.Nitris are a joke and Avid no longer provides computers even the Symphany comes with your choice of Apple Mac Pro or HP 800. (Dual Xeon)
there are better "hardware" answers that what Avid sells for Adobe. Decklink, Aja to name a few.
if you have to share then you have no choice. this is the one area Abode does not lead.
renders have to do primarily with 2 things CPU power (Xeon will render faster than single i7)
and Drives. the faster your drive set up the faster the render. Memory does play a part and so does the video card depending on what codec and to what
it also depends on WHAT you are rendering and from what for the HDDs.
without knowing your work flow format and codec its impossible to suggest something.
in terms of rendering
Core i7
Dual Xeon (faster unless still doing DV/HDV thru firewire)
Sonnet raid array
Scott
ADK -
Adobe Flash Player 10 Fix for WinXP and Vista, IE7, IE8, Firefox, ect.(New Fast Fix)
(This is a possible solution for most users) I have found that inside the folder C:\WINDOWS\system32\Macromed\Flash (WinXP Home/Pro) (Computer > C: Drive > Windows > System32 > Macromed > Flash for Vista) there should be a file named FlashUtil10b.exe (IF NOT YOU SHOULD UPDATE AS SPECIFIED!) (or FlashUtil10a.exe or for older versions something similar depending on your version), which is the update utility for flash player. Click on this and if it updates, you will have to restart your computer. This should fix any missing files, and update you to the latest version.
On a side note to all those who read this, I downloaded and installed 5 different times, the same version, from different websites, all for the "new" flash version, and they didn't work (this also included trying to update Shockwave player itself). Apparently, going directly to the website and downloading a new version of Adobe Flash Player, and installing, doesn't uninstall the older version, (though it says it does nor does the uninstaller work directly from the website) nor fixes the problem. I assume they are aware of this problem, because they included this bug fix in revision 10b. This fix should work for those of you whom cannot view/see flash images as well. There also appears to be a bug/reference problem with the installation of IE8 giving the error "Missing Shockwave Decompression XTRA", when trying to play a Shockwave/Flash file, which seems also to affect Firefox and other browsers. It doesn't recognize that the folder or files that it needs in it, exist. I never had his problem before, until IE8 was installed. I checked which version I had in the system32 folder and found this updater built in to Adobe. Version 10a does NOT automatically update, but version 10b includes this fix. I currently had version 10a when I received this error, and began digging for a solution. Doing the update as described above fixed the problem, and updated it to version 10b.
The new flash version 10b has some new features, such as volume control, auto-updating, and several rendering options for those who may have a faster or slower computer/video card.
I found this works great for XP users but unsure of the Vista users. The process is the same for Vista and the update should still work the same, as long as you run it as Administrator, I assume. I have this also posted on wwwdslreports.com at http://www.dslreports.com/forum/r22115254-IE-IE8-and-Adobe-Flash-Question and here http://www.dslreports.com/forum/r22361930-Adobe-Flash-Player-10-Fix-for-WinXP-IE 8-Firefox-ect. It appears to work for everyone so far. I have not heard of any problems from users with this problem running the RC (Release Canidate) for Windows 7 yet.
I hope this works to your benefit.
Please leave a reply to help Adobe and other users know if this fix worked for you or not. If not, please explain what you did, and the effects your seeing, including operating system, site of the flash file trying to view, browser type (ex. IE6, IE7, IE8, Firefox, Opera, ect.), and I will try to help you as best I can.
(I would strongly recommend those not using IE8, or Firefox 3.5, get the updated versions)
If your looking for uninstallers go to this site: http://kb2.adobe.com/cps/141/tn_14157.html
If your looking for a true full install, you can download this developer version for Windows and Mac: http://download.macromedia.com/pub/flashplayer/updaters/10/flash_player_update2_flash10.zi p (44MB) (If you download this, I would recommend you still follow my instructions for the Flash Utility before restarting your computer.)I would recommend all users having problems try the above solution first.
I have posted this on a couple of websites, and so far it has fixed everyones problems.
Firefox 3.5 Beta 4 has Adobe Flash Player coding built into the browser so that it not only loads faster but works better.
You still need to have the Adobe ActiveX plug-in and Adobe Flash Player for both browsers.
I would also recommend you download Shockwave Player 11.
IE8 has tried this as well, but it still has a couple bugs in it.
If you have IE8 or FireFox 3.5 Beta 4, and you are still having problems, then I recommend that you go to www.windowsupdate.com and get all of the latest updates (including SP3), then try this fix again.
Your auto-updater built into windows (If you even have it on) doesn't always pull down every update available for your computer. It only pulls down the manditory ones.
Sometimes you HAVE to go to the website and manually get them yourself. I recommend when you go to the website, you click on custom install and pick every last one of them to install, which includes, hardware and software fixes for your computer.
What a lot of people don't know is that when you have installed and tried all of the recommended fixes that Adobe gives you, and it still doesn't work, is that you are having registry conflicts within your Operating System (OS ex. WinXP, Vista, Linux, ect.), and that it is not the Adobe software at all.
Those are usually repaired by making sure your computer stays up to date.
The fact is the computer world is changing so rapidly that everyone can't keep up. You have to check for updates weekly.
If you fall behind on those updates, then you start having problems with your computer and/or software.
One problem then can turn into many and people get frustrated when something all the sudden just quits working.
Take a day or two at least once a month, and make sure you update and maintain your computer.
This includes disk defragmenting, disk cleanup, and making sure you have all the lastest updates.
You can get to Disk Defrag, and Disk Cleanup by going to Start, All Programs, Accessories, then to System Tools.
I would do Disk Cleanup first, then Defrag.
I hope you take this advise into consideration, and that it is very helpful for you.
If you find this useful, please come back and reply to this forum, and let everyone know so that others will be encouraged to do this.
Thanks and goodluck, from another user like you. -
Qosmio X300-16D - thermal pad/paste solution for CPU and Nvidia MCP
Can anyone suggest a good (specific) thermal solution for the Qosmio X300-16D CPU and Nvidia MCP?
I ask because there is a slight complication with the 16D (an SLI setup)... the heatsink for the CPU and Nvidia MCP are connected in the same thermal module, but while the CPU heatsink is screwed down, the Nvidia MCP chip is not - so there is a large gap between that chip and the heatsink.
I'm guessing some form of thermal pad should be used here rather than grease/paste? Does anybody know what thermal pad has been used by Toshiba for this, or point me to a high quality replacement that is suitable to be used?
Thanks,
ChrisHi
As far as I know the thermal grease 776 (part num: K000055600) could be used.
But there are different cooling pends as mentioned by Akuma.
There is an thermal fan 1 for DUAL-VGA (K000061940) and thermal fan 2 for dual VGA (K000061950) as well.
I assume both are for SLI configuration.
There are also some other cooling modules for VGA (VGA THERMAL MODULE-1-GT-NB9E K000065560 and VGA THERMAL MODULE-2-NB9E-W/O TMA K000065560)
You can google for these part numbers Found all in internet
Maybe you are looking for
-
Hi. I just got a new iPad. How to I move my Game Center games from my old iPod? My family uses one Apple ID, and I keep getting another Family member's Game Center on my iPad!
-
Error occuring when trying to download movie from apple tv
When ever I rent a movie from apple tv an error occurs when I go to downlaod it. The error just says that the movie cant download right now, try again later. Even after numerous attempts the movie still wont download. This had been happening for mont
-
Why isn't my apple ID is not verifying when I am trying to activate my iMessage ?
I am trying to activate my iMessage, but when my account is verifying, it goes back to "enter your username and password". It goes back to the first step. Please can you guys help me in this ? I really feel like talking to my friends on iMessage. I h
-
Does anyone know how to create a page curl effect on the screen of a mobile phone? The effect I am trying to create is to show screen with a screen protector on.
-
Hi SBO-Forum, I wrote code to create user defined table and fields - that works fine first time (DI API, version 2004A, C#). I don't wrote code to remove this tables/fields automatically ... I made it manually. I cleared my entries from tables OUTB,