A newer version of data type BBP_PDS_HSS_IC was found than one required
Hi,
When I create a SC, it is automatically approved but the PO is not created.
If I check TRX SM58 I get the message:
"A newer version of data type BBP_PDS_HSS_IC was found than one required"
Any ideas?
Carlos Durazo
Hi
Which SRM version are you using ?
By an chance have you created any new fields in the standard structure
<b>'BBP_PDS_HSS_IC'</b> using <u>SE11</u> Transaction in SRM system. Please confirm the same by taking help of ABAP person here. Seems to be like the structure is not Activated completed.
<u>Related SAP OSS Notes -></u>
Note 758067 - SRM 4.0: Change documents of new sets (DynAttr, Weight)
Note 820201 - Document changes for attachments does not work
Hinweis 691880 - Changes in tolerances not displayed in purchase order
Note 1018714 - Change documents: Time stamp of the application server
Note 1006898 - Deleted vendor not displayed in Change hist of Shopping cart
Do let me know.
Regards
- Atul
Similar Messages
-
Dump-A newer version of data type "ZMNFLOCK" was found than one required
Hi,
I am getting dump in program when there is a select query on ZMNFLOCK table.
Error analsys is given as
Error analysis
The data type "ZMNFLOCK" was loaded from the database during the program run.
However, a type of a newer version than the one requried was found here.
What could be the problem? my BASIS person says this is somewhere related to ABAP.
should i Adjust & Activate database by going to SE14 for ZMNFLOCK table.
Also noted that error is random in nature and its not coming everytime.Hi,
There could be an issue with in the table, As Dataelement or domain related to any field in table may have changed, And that field is not getting used aal the time, That's why Dump is coming randomly.
The best possible solution is to Activate and adjust database table through SE14, This will update table with all the updated versions.
Thanks
Saurabh Siwach -
Error: A newer version of data type was found than one required
Hi Experts,
we made a changes to a table and then transported the table to the quality system. But a program which is referring to this table, results in dump with the below error message.
Error Message>>>>>>>>>>" A newer version of data type <TABLE> was found than one required "
The issue occures inspite of
1. re-activated the table and send to quality system
2. Re-activated the program
3. Activated and adjusted database in SE14.
Please let me know the correction to be taken to resolve the issue.
Regards
Suresh KumarThis happens when you modify your new data element, domain while another program is currently using it.
Simply get out completely of the program, re activate the program, reactivate the table. You might need to run se14 to convert the database table but this does not happen frequently. Try first to reactivate the program
Dean
Edited by: Dean Ton on Mar 8, 2012 9:54 PM
Edited by: Dean Ton on Mar 8, 2012 9:56 PM -
VL10 A - Data type "LIKPVB" was found in a newer version than required
hi Gurus!
in transaction VL10A i get a short dump that states that the data type LIKPVB was reloaded and but in a newer version than required in program RVV50R10C.
I checked the abap dictionary for the data type and it said that it was modified a month ago by SAP.
To my knowledge no new configuration or notes ware applied around this period.
The solution that the dump indicates is really wise "try to restart the program".
I searched for sap notes that would apply or sdn posts and came up empty.
Please help !I guess you have no clue either...
any hints? -
A new version of the data type is present than one required
Hi Experts,
I am getting a short dump saying "A new version of the data type is present than one required".
The data type in my case is the Transfer structure for 2LIS_02_SCL. I am getting this short dump whenever i try to change the transfer rules.
I tried activating and deactivating the transfer and update rules but to no avail. Kindly advice.
Thanks in advance.SAP Note 1157796 resolved the issue.
-
Block create type of operation more than one time
Hello SAP CRM Experts!
I have a question.
How do I get block the user create a type of operation more than one time?
For example, I have a kind of opportunity that can be created only once for each client. How can I do this using the customizing?
Best Regards!
Tks!Hi,
you could only limit the assigned internal number range to one object, which would allow only one document to be saved. The next creation would then fail since there is no number available.
This is the only solution I can think of, otherwise you need to program a BADI.
Regards, Kai -
Date Control should highlight more than one range of dates in a month.
Hi All,
Date Control should highlight more than one range of dates in a month.We are creating a web interface for PR01 ( Travel Management Module ) , in a month a traveller can have more than 2 trips and we need to highlight all the travel date ranges in the Web DynPro date range control.
Thanks & Regards
Gaurav JainHi Thomas,
I used DateNavigatorLegend and DateNavigatorMarking and did not give any default value or context mapping to the DateNavigator element.
The DateNavigator is now highlighting only the first dates of the ranges that I have created in the WDDOINIT method.The DateNavigatorMarking takes only one date not 2 dates in the properties So kindly suggest how to display multiple date ranges.
Thanks & Regards
Gaurav Jain -
Can i run the free version of Adobe Acrobat DC across more than one of my laptops during this test run
You mean the trial version? Yes, you can run it on as many devices you want. Each device will have its own 30-day trial limit.
-
hey is the new update going to let people facetime more than one person like 3-way? you'd think apple would have done this by now
If there is we will not learn about until the update is released. Speculation about such is not permitted in the forums.
-
Demantra - Create New Series - Mdp_matrix - Data Type String Issue
I created a new series (MDP_matrix) that has the data type as String. The display format is BLANK.
I was able to load the data into mdp_matrix table for the series i created.
However, when i look at the series in a worksheet, it does not display the string value. It display zero. for some reason, it considers the series as numeric and not string. Any idea why that would be happening?
This is on version 7.2 using SQL server/tomcatHi
1. Have you tried giving display format i.e ###?
2. Is your server expression something like max (mdp_matrix. column_name)?
Tks
MJ -
Column Data type for text more than 10000.
Hi,
Which data type is best suited for a column which will have a text length more than 10000. The text is simple english only.
Regards
SriniHiTodd Barry,
The version i am using is 8.1.7.
What is the capacity of CLOB in terms of english characters. Documetation says it is 4 GB.But it does not talk about length of characters..When i am trying to insert simple english text of length of 10000, i am getting following error:
ERROR at line 1:
ORA-01704: string literal too long.
Even LONG datatype also can take up to 5000 only.
Can you suggest the best way to insert such a huge text..
Appreciate your response.
Regards
Srini -
Transferring primitive data types via UDP other than a String
Hi ALL,
I am new to Socket programming in UDP.
I need to implement a FTP client-server application.
Now the packet that I need to transfer using UDP as a DatagramPacket consists of multiple primitive data types, (3short types and 1 byte array of size 265.)
How do I do that?
All the samples and examples I managed to find on the Internet illustrated the problem of transferring a String type converted to getBytes and the byteArray is transferred.
However, in my case i need to pass this structure..(3fields) to the other side. If I convert the 4 fields to a single concatenated string there's this problem of finding out where each of the four fields begin and where do they end.
Please suggest and help...
thanks..
: )Just create a class that represents your structure and convert-it to a byte array that can be sended over a DatagramSocket.
Try this sample code :
import java.io.*;
import java.net.*;
public class DP
/** Creates a new instance of DP */
public DP ()
* @param args the command line arguments
public static void main (String[] args)
try
System.out.println ("Starting server ...");
DatagramServerThread server = new DatagramServerThread ("Datagram server");
server.start ();
System.out.println ("Creating your object ...");
ByteArrayOutputStream baos = new ByteArrayOutputStream (); // Creating byte array output stream ..
ObjectOutputStream oos = new ObjectOutputStream (baos);// Creating a object output stream that writes to byte array output stream..
YourStructure newObject = new YourStructure (); // creating your data structure..
newObject.setShortField1 ((short)12);// setting values ...
newObject.setShortField2 ((short)45);
newObject.setShortField3 ((short)4);
newObject.setArray (new byte [256]);
oos.writeObject (newObject); // write your structure to object output stream...
byte data_to_be_sent[] = baos.toByteArray (); // retrieving equivalent byte array...
// send data...
DatagramSocket s = new DatagramSocket ();
System.out.println ("Sending ...");
DatagramPacket packet = new DatagramPacket (data_to_be_sent, data_to_be_sent.length);
packet.setAddress (InetAddress.getByName ("localhost"));
packet.setPort (8888);
s.send (packet);
catch (Exception e)
e.printStackTrace ();
class YourStructure implements Serializable
* Holds value of property shortField1.
private short shortField1;
* Holds value of property shortField2.
private short shortField2;
* Holds value of property shortField3.
private short shortField3;
* Holds value of property array.
private byte[] array;
* Getter for property shortField1.
* @return Value of property shortField1.
public short getShortField1 ()
return this.shortField1;
* Setter for property shortField1.
* @param shortField1 New value of property shortField1.
public void setShortField1 (short shortField1)
this.shortField1 = shortField1;
* Getter for property shortField2.
* @return Value of property shortField2.
public short getShortField2 ()
return this.shortField2;
* Setter for property shortField2.
* @param shortField2 New value of property shortField2.
public void setShortField2 (short shortField2)
this.shortField2 = shortField2;
* Getter for property shortField3.
* @return Value of property shortField3.
public short getShortField3 ()
return this.shortField3;
* Setter for property shortField3.
* @param shortField3 New value of property shortField3.
public void setShortField3 (short shortField3)
this.shortField3 = shortField3;
* Getter for property array.
* @return Value of property array.
public byte[] getArray ()
return this.array;
* Setter for property array.
* @param array New value of property array.
public void setArray (byte[] array)
this.array = array;
public String toString ()
StringBuffer buffer = new StringBuffer ();
buffer.append ("Short field 1 is ");
buffer.append(this.getShortField1 ());
buffer.append ("\nShort field 2 is ");
buffer.append (this.getShortField2 ());
buffer.append ("\nShort field 3 is ");
buffer.append (this.getShortField3 ());
buffer.append ("\nYour array field is ");
for (int index = 0; index < this.getArray ().length; index++)
buffer.append ("Index [" + index + "] = " + this.getArray () [index] + "\n");
return buffer.toString ();
class DatagramServerThread extends Thread
protected DatagramSocket socket = null;
public DatagramServerThread (String name) throws IOException
super (name);
socket = new DatagramSocket (8888);
public void run ()
try
byte buffer [] = new byte [socket.getReceiveBufferSize ()];
DatagramPacket packet = new DatagramPacket(buffer, buffer.length);
System.out.println ("Server is ready. Waiting for packet ...");
socket.receive(packet); // waiting for packet ...
System.out.println ("Packet received! : ");
byte received_data[] = packet.getData ();
ByteArrayInputStream bais = new ByteArrayInputStream (received_data); // Creating byte array input stream ..
ObjectInputStream ois = new ObjectInputStream (bais); // Creting Object input stream
Object readed_object = ois.readObject ();
YourStructure your_original_object = (YourStructure)readed_object;
System.out.println (your_original_object.toString ());
System.out.println ("Exiting server thread. Bye");
socket.close ();
catch (Exception e)
System.err.println ("Server error");
e.printStackTrace ();
} -
I downloaded new version and can't get in dock.
Which iBook do you have?
http://support.apple.com/kb/HT1772?viewlocale=en_US
Which version of the OS is installed, and which version are you trying to install?
You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it. -
How to deploy a Webapplication on WAS more than one times on same server?
Hi all,
I 've a special problem:
In our web-app (some DC's) also stored propertie-Files. Now we would to deploy this application more than one times at same server using different WebContentRoots. (f.e. http://server/app1 and http://server/app2 a.s.o.)
We know, that we must create different EAR-Projects and refer the web-Module and configure the application.
But in the second application there it's recommended to change some properties.
How we can handle this in JDI without copy the web-application?
I hope my question can be understood.
Best Regards
Sven Rickelt
Using Netweaver + WAS 6.40 2004 SP 13Hi Sven,
as I'm new to NWDI, I cannot give you a 100 percent, field-tested solution. But have you already thought about using the Configuration-Adapter?
If you can change the source of your web-app, you could maintain the data formerly stored in property files using the configuration adapter of visual administrator. The SC <a href="http://help.sap.com/saphelp_nw04/helpdata/en/45/e7e14b517b42788a1c166f9f32455e/content.htm">configuration</a> allows you to access this data.
With this approach you can stick to one web-application and do the configuration work separately for each deployed application.
Best regards,
Frank -
AE 12.1 Crash: "There was more than one edit in the video track"
Here's the last log message: Last log message was: <140735209366288> <ImporterQuicktime::NativeReaderGetInfo> <5> There were more than one edit in the video track, defer to non-native quicktime for 0x1308a73a8.
iMac 27-inch, Late 2012
Software OS X 10.9
Graphics: NVIDIA GeForce GTX 680MX 2048 MB
Memory 24 GB 1600 MHz DDR3
Processor 3.4 GHz Intel Core i7
Areca 8050 RAID6 config (Thunderbolt)
AE 12.1 (Crash initially occured in previous version, which I don't know what it was - AE CC, but I don't know exact number - problably whatever the most recent update was)
My project has a bunch of ProRes files referenced... even when I move them, and After Effects marks them as offline, I just get this: Last log message was: <140735209366288> <ae.blitpipe> <2> Making New Context.
I have done some searching, and even if I go to Google, and put the search in quotes, I get nothing. It doesn't sound like anyone else has had just this problem.
Help?Sounds like the ProRes files are encoded oddly in a format that AE's own handler can't understand and while falling back to QT it crashes. I believe there are some known issues with this for ProRes 444, but then again I'm not a Mac guy...
Mylenium
Maybe you are looking for
-
Fail to burn, error code 4280(0x000010b8)
I try burning a CD with iTunes and it always fails. Here's the diagnostics. Microsoft Windows Vista Home Premium Edition Service Pack 1 (Build 6001) Dell Inc. XPS M1530 iTunes 8.1.0.52 QuickTime 7.6 FairPlay 1.2.12 iPod Updater Library 8.1d19 CD Driv
-
I have had my iPad2 for 3 months. All of a sudden I can't get on line with either my WiFi, which works with my Mac, or 3G celluar. A locked icon appears in the upper right corner of my screen near the battery indicator? Apple support tells me to go "
-
hello. I purchase/bought a MSI NX6800GT TD256 and I noticed that this VGA card was made with production problems, and my 6800GT is with this problems... unfortunatelly (blue dots and my computer never initializate) - my power supply is a seventeam 40
-
Regarding BPM Object Retrieval in PAPI API
Hi, I am using Oracle BPM10gR3 to develop BPM processes. I am having external connectivity of BPM processes with external Java application through PAPI API. I am having a BPM Object defined as "ApplicationObject" under Module which consists of instan
-
Zero Condition Value in IDOC segment
Hello SAP Experts, I have a requirement that the zero value condition type should get populated in the pricing segment of idoc E1EDP05 under E1EDP01. When we try, this no condition type comes in this segment. Based on this , I have to map certain dat