A/P Invoice Open with partial payment + credit memo

Hi everyone.
I have an AP Invoice with status=Open when this document must be CLOSED because I did a partial payment + credit memo=100%, as the secuence below:
1. AP Invoice for $ 100 includes 2 item ($40 + $60)
2. Payment partial for 1st item ($40)
3. Credit memo for 2nd item ($60)
AP invoice must be closed, instead it's OPEN.
I checked BP Internal Reconciliation but there's not documents to recontiliate...
Thanks for any help
Regards,
Rolando

Hi,
Please check Note No. 1301470 and run the select query.
If results obtained log a support ticket to SAP.
Regards,
Jitin
SAP Business One Forum Team

Similar Messages

  • A/P Down payment invoice cannot be drawn to credit memo

    Hi Experts
    When i try to draw a A/P down payment invoice into a A/P credit memo, it gives me an error like Basetype mismatch what could be the reason for this ?
    Thanks & Regards
    Kanishka Wickrama

    Hi!
    You need to use Copy From option to book Credit Note on Down Payment. Also, if your Down Payment is Reconcilled (Payment Done) you need to cancel the payment first. Make sure the Downpayment is in OPEN status.

  • Excise invoice with reference to credit memo/debit memo

    Normally we create Excise Invoice with reference to Inter company Invoices . Is it possible to create Excise invoice w.r.t. Credit Memo/ Debit Memo. If Yes , then what are the settings that needs to be maintained and where?

    Excise JV thru J1IH transaction is one option. It gives you 6 options.
    1.Material Doc for written off
    2.materail doc for non production
    3.Additional Excise
    4.Other adjustments
    5 TR6 Challan
    6.Cacel Excise Invoice

  • How to calculate AP invoice and AP downpayment AR Credit Memo together?

    Dear All,
    Does anyone know how to calculate AP invoice and AP downpayment AR Credit Memo together for the purchase summary, by using SQL statement?
    Is it sum altogether...like AP_Invoice + AP downpayment - AP Credit Memo?
    The result as shown below:
    BP_Code        Total
    XXXXXXXX        $10,000
    From Samson
    Edited by: samson leung on Jun 10, 2009 9:49 AM

    Try this to start:
    Select T0.CardCode 'Vendor#', Sum(t0.DocTotal - isnull(t3.DocTotal,0)) 'Total'
    from dbo.opch t0
    inner join dbo.pch1 t1 on t1.docentry = t0.docentry
    left join dbo.rpc1 t2 on t2.docentry = t1.TrgetEntry
    left join dbo.orpc t3 on t3.docentry = t2.docentry
    group by T0.CardCode
    Thanks,
    Gordon

  • A/R Invoice should be open while partial payment

    I am having a problem in incoming payment.
    1. Firstly i made one A/R Invoice of Rs. 10000.
    2. Then in incoming payment by using payment means i had made the partial payment of Rs 4000.
    According to logic A/R Invoice should remain Open, but its not happening the status of A/R Invoice is getting closed.
    Please solve my problem how i make A/R Invoice Open in this situation.
    Thanks-
    Nitu

    Hi Nitu Singh,
    I had the same problem with the same version that you used (8.81 PL07) and I know the right process of before and after versions of it, is to enter the partial amount in line of the selected invoice on the screen of the payment document.
    I do not know why SAP has changed the process in this. is this a bug version or there is another way/process to do this for this version.
    Please show me how you rectified the situation for your customer.
    Thank you for your reply
    Hafid

  • F-28 - I want to clear invoice with partial payment but wanna keep ageing as per original invoice

    Hi All,
    Normally, I am clearing partiall payment with partial option in F-28. But that shows both the invoice and payment entry in the open item.
    Now I am trying to clear partial payment with Residual option. But in this I also want to keep the ageing of the residual balance same like original invoice. Currently if I am doing this, residual balance ageing comes in the latest. which is wrong. and shows a incorrect debtors ageing.
    How can I do this task. Kindly help!
    best regards,
    adnan abbasi

    Hi,
    Please check your configuration for customer tolerances
    Path: Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Open Item Clearing -> Clearing Differences -> Define Tolerances for Customer/Vendors.
    Choose your company code, double click to get the details setting of Tolerance.
    Here, You tick on "Payment term form Invoice".
    By this way, when you do Residual payment, the payment term will be copied from original invoice to new document.
    Julie

  • R3 AR aging report with partial payment need FBL5N

    Hi, does anyone have AR aging report list NET BALANCE for each invoice for AR Aging report?  I tried FBL5N which did not apply partial payment to each invoice, customer would not want to see this kind of report and we did in Excel for all open invoices which just waste time only.  
    We do not have BW or Crystal report but need to know which canned report can be used for us to send statement.  Tks.
    SAP R3 ECC 6.0 user.

    Hi,
    I am actually running the SAP Delivered Report in BW.
    So I didn't changed any thing in report.
    I m running the report in ECC using s_alr_87016128 tcode.
    Still I m getting the amount difference.
    I have checked at customer level with company code and Key date.
    Can i get inputs on these.
    ECC Report s_alr_87012168
    BW Report:0FIAR_C03_Q0005
    Thanks,
    Geetha

  • To find Invoice Open or Partially Paid

    Hi friends,
    I have open invoices and iam displaying AMOUNT BSID-WRBTR in my report.
    a) Now i have to find out the invoice is fully open or partially paid.
    b) If partially paid what is the amount which is paid and what is the due amount..
    what are the table and fields which i should check...
    i tried searching the forum but couldnot find any info..
    Can any one let me know...
    Thanks in advance.
    Kumar

    oh okies.....
    I think you should get the details with SQL trace.....
    SQL trace will give you all the tables used and then you can get the tables which gets the details u req.
    Steps for SQL Trace....
    go to transaction st05 and then turn on/Activate the SQL trace ....
    now go to the standard transaction which shows the details u req.
    now go to ST05 again and turn off/Deactivate the trace.....
    now click on Display Trace....
    you will get list of tables used.....
    you can check with those tables and you will find the entries....
    Otherwise
    Go to standard transaction and press F1 help on the field which shows open invoice or partially paid....
    then click on technical settings,  this will display you the field and the table used.....
    sometimes it also shows the structure, if it shows the structure that would not be helpfull, but if it shows you the table then you can get the details from that table....
    Regards
    Sid

  • How to create excise invoice with reference thorugh credit memo

    Hi All,
    Please provide any solution for the following qurey:
    How to create excise invoice with reference thorugh credit memo

    Hi murali,
    i am unable to understand your requirement i think there is no like this scenario requirement for any client
    if any requirement is there kindly explain detail
    cheers

  • Issue In Sales Invoice DTW with down payment

    Dear Friends,
    I am trying to add some Sales Invoice with advance payment by DTW.
    Entries of Sales order , Sales Advance Down Payment request & Payment against Advance Down payment request are already done.
    In Invoice master file for DTW I add down payment amount in DpmAmnt.
    Invoice was successfully uploaded but link between down payment & invoice is not generated.
    But link between Invoice and Sales Order is generated.  
    How to link Down Payment Entry to Sales Invoice in DTW?

    Dear Swapnil,
    After seeing your attached image file, can you please rectify the same in your system as I have done it successfully at my end. Please find below screen shot for your reference.
    Please test it and let me know the same for any issue.
    Regards,
    Vinod Memane

  • Incoming payment for incoming payment, credit memo, journal entry &invoice

    The message subject is expression of my f**king confusing.
    Suppose, we received payment on account 120 Ringgit, invoice amount 210 Ringgit, JE transaction amount 10 Ringgit and credit memo amount (without copied from a certain invoice) 5 Ringgit.
    In one new incoming payment, I pay all the 4 transactions, is it correct procedure ? it means the balance of the customer will be zero, that's what we want to do. Thanks in advance
    Balaj

    First and foremost, I would like to stay that this is a Public Forum and you must refrain from using improper language.  There are people here to help you.
    If you want to adjust the JE, Payment on Account and Credit Memo aginst the Invoice and receive the balance amount, it is possible through incoming Payment.
    You will highlight the Invoice, CM, JE and check the Payment on Account box to include the On account amount, go to Payment means and in the amount column press CTRL+B to copy the balance amount and ADD the payment
    Suda

  • How to copy A/R Invoice PLD to A/R Credit Memo

    Is it possible to copy a PLD for the A/R Invoice to be a PLD for the A/R Credit Memo?  I created a custom PLD for my A/R Invoices and I would like to save as credit memo pld and just make some slight modifications without having to do the whole thing from scratch.
    Is this possible?
    don

    It is possible when you open both PLD in the same time.  However, since they have different table links.  Better just copy Text and format part.  If you do need to copy the database field, you have to change every single field.  You may end up with more times to fix problems than time saving from the copy action.  Keep in mind that system PLD field should not be deleted.
    Thanks,
    Gordon

  • Copy from a closed A/R invoice to a A/R Credit Memo.

    Hello Forum,
    I have a closed A/R invoice that is paid up.
    Now, if the customer returns that  item, I would create an A/R Credit Memo and pull up from the above A/R Invoice. However, SAP B1 8.8 does not allow copy from a closed A/R invoice. In that copyfrom list only the open A/R invoice show up.
    Is this how it has always been, or am I missing something here.
    Basically my need is to be able to create a A/r Credit Memo from a closed A/R invoice. Without this, we have to enter items one by one, rather than be able to copy them all and remove the ones we don't want returned. Right?
    Thank you.

    Hi Syed,
    It had been always like that, from version 2004 until latest version. Never used version prior to 2004, but I believe it should be the same case. The reason is quite simple, closed Invoice couldn't be credited again with a credit memo document. However I understand that your intention here only to copy all item (as a template only), but that's not how SAP B1 worked.
    Best Regards,
    Hendry Wijaya

  • Partial value credit memo

    Hi Gurus,
    Querry 1:  Suppoe I make credit memo order of  100 value with qty 10. Now at the time of credit memo( that is during vf01), I want to bill only qty 5 but qty is uneditable in vf01. How can I do this?
    Querry 2: Suppose I am making order related invoice for a particular material. I made order  of lets say 10 qty and then invoiced ( order related) 10 qty in VF01. When I goto document flow I see that order is still  showing status " being processed" Although I have checked in item category that completion rule is   B (Item is completed after full quantity has been referenced) but even after full qty is referenced the order doesn't exhaut. This i think is because completion rule works in conjuction with the document flow indicator which is there in copy controls of  sale document to delivery but since here there is no delivery and direct order related billing so there is no update document flow indicator also.
    In this case how do I exhaust my orders then.

    Hi,
    Item is not relevant for delivery means system should not generate any schedule line for that item.Schedule line icon in sales order must be DEACTIVATED.
    Go to VOV7 >> select your Item category >> Details >> Remove tick mark from schedule lines allowed.
    For debit memo and credit memo system will not generate any schedule line it is deactivated in item detail.
    For partial qty follow what SAJU suggested.
    Thank you very much SAJU SOM
    Kapil

  • Standard invoice was paid even though credit memo exists for a supplier

    Hi ,
    Supplier have 3 credit memos having sum of amount as -467000. The standard invoices were getting paid even though the amountis less than the credit amount.And the credit memos are upadted on 24/11/2010. We thought that the credit memo payments were on hold, but the last update date at paymnet schedules is invoice creation date.
    last updated date at invoice header level is 24/11/2010. Any reason why teh payment was not stopped even though credit memo exists.

    You have to apply the credit memo to the invoice.

Maybe you are looking for

  • Append error on field length

    Hi all, I've gotten the header/trailer removed in the sender communication channel using java mapping and now must take the resulting detail rows and only allow them to be 80 characters in length and in flat text format (as it was initially). Below i

  • ConfigMgr 2012 Update Source content deleted

    Greetings, I am experiencing a problem that is appears to be the same as the old thread here: http://social.technet.microsoft.com/Forums/en-US/bee18ffb-f779-4aa4-900d-046e7711424c/sccm-2012-source-content-gets-deleted?forum=configmanagergeneral Rathe

  • "Script: resource://gre/components/nsSessionStore.js:2953", what's causing this

    usually happens when i go into firefox 4 (latest version). i believe it makes my firefox sluggish

  • Schedule CR by crystal report data consumer

    Hello expert,         I want to embed a xcelsius dashboard into crystal report by crystal report data consumer, but I don't know if I can schedule this mixed crystal report in infoview and send it out by email periodically? because I 've heard there

  • Incompatible cygwin .dll -- incompatible per_process info 0 != 168

    Hi all, I am working on a Java program that makes a call through JNI to a C++ library. The code works fine in Linux (compiled with g++), but I am stuck with a windows-related problem. On windows, the compilation of the dll is made using the cygwin en