A.pack not showing AC3 for encode results

I'm using a.pack 1.5.4 to attempt to convert an .aiff file that I got out of Compressor 1.2.1 to an AC3 file. When I select "encode" the file name it suggests has .aif at the end intead of .ac3. I trashed the A.Pack preferences but it did not change anything. What am I doing wrong?
Pete D.

Hi:
What am I doing wrong?
I really don't know but probably following the steps from this
Encoding AC3 with A.Pack tutorial you'll find it.
Hope that helps !
  Alberto

Similar Messages

  • Calculate result as average in the report not showing average for all

    Hello,
    I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
    1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
    2. Aggreagation tab: exception aggregation: Total and reference char: []
    Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
    Please help me in resolving the issue- why portal not showing value for all.
    Thanks,
    Vijaya

    SAP note solved the purpose.
    Thanks & Regards,
    Vijaya

  • ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant

    ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
    - For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this? 
    Thanks
    Kosin Usuwanthim

    It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

  • Do not show dots for 'free' events in the calendar month view

    I wish I could.... not show dots for 'free' events in the calendar month view. For an overview of when I have hard-scheduled events in the calendar it's pretty tedious and slow to go day -by day, and other views... Instead the dot  in the month view... - why does it show even "free" events? Any ideas, tips?
    Thanks!

    Unfortunately there is no option to disable the dots.
    <Edited by Host>

  • Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
    LN

  • I just downloaded Acrobat XI and the addin options is not showing up for Access 2010

    I just downloaded Acrobat XI and the addin options is not showing up for Access 2010

    Acrobat XI Pro/Standard doesn't support MS Access 2010:  http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
    Third-party version/ Acrobat Version (ship  date)
    Acrobat 6
    (April 2003)
    Acrobat 7 (January 2005)
    Acrobat 8
    (November 2006)
    Acrobat 9 (July 2008)
    Acrobat X (November 2010)
    Acrobat XI (October 2012)
    MS Access
    Office 97
    x
    x
    x
    x
    x
    x
    Office 2000 (Office 9)
    N/A
    √
    √
    x
    x
    x
    Office XP (Office 2002/Office 10)
    N/A
    √
    √
    √
    x
    x
    Office 2003 (Office 11) (11/17/03)
    N/A
    √
    √
    √
    √
    x
    Office 2007 (Office 12) (11/30/06)
    N/A
    N/A
    √ (8.1)
    √
    √
    x
    Office 2010 (Office 14) 32 bit
    x
    x
    x
    x
    √
    x
    Office 2013 (Office 15) 32 bit
    x
    x
    x
    x
    x
    x

  • Why does adobe photoshop elements 6.0 not show up for a download choice of putting my photos into my computer, I'm on windows7.  I'm sure it did when I first got my computer.  Could it be that I have lots of other photo software that may be interfering?

    why does adobe photoshop elements 6.0 not show up for a download choice of putting my photos into my computer, I'm on windows7.  I'm sure it did when I first got my computer.  Could it be that I have lots of other photo software that may be interfering?@@

    If you open the Organizer and go to Edit>Preferences>Camera or Card Reader, do you have Auto Launch Adobe Photo Downloader on Device Connect checked?
    Try checking that if you don't.

  • The DSLR sequence settings are not showing up for me. (I bought CS6)

    Like I said my DSLR sequence settings are not showing up for me even though I bought Premiere Pro CS6, I look for a solution but all that came up was that this happens with a trial verison and I don't know what to do.

    Did you buy ONLY PPro, or did you buy a suite?
    Did you install the program AND the extra content?
    Also... More information needed for someone to help... click these links and provided the requested information
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679

  • Newly Created Branches not showing up for Recruiter in the Requisition.

    Hi,
    We have created Branches as Administrator and the Branches are not showing up for Recruiter when trying to create the requisition. Any suggestion on this will be great help.
    Thanks.

    Hi,
    the most common reason for branches not showing up is caused if someone does not use the frontend for administrator but the IMG nodes for creating branches and assigning to companies. This is caused by missing bp role assignment.
    So check the branches in TCODE BP that they have the role for e-recruiting branch assigned. The standard delivey uses bp role RCFBRA but this can be changed in T77S0 RECFA BRARO.
    Furthermore you should check if T77RCFBRANCHCOMP entries are ok.
    Kind regards
    Roman

  • Cs6 bridge not showing thumbnails for raw file

    Just upgraded to CS6
    cs6 bridge not showing thumbnails for raw files.
    Can see thumbnails in CS5.1 bridge  and LR 4.2 which fortunately i did not uninstall.
    Bummer since I am up against a hard deadline.
    Really Sucks

    We can't know. You are not offering any system information or e.g. info about what image files you are working with. Since they do show up in your otehr programs, my assumption would be that you need to switch the Camera Raw engine back to the 2009/2010 version in Photoshop and not use the default new 2012 one. Perhaps your thumbnails will appear then....
    Mylenium

  • I have downloaded ADE 3 on my macbook.  It did recognize my Aluratek Libre the first time I used it but now it does not.  I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre.  Help pls

    I have downloaded ADE 3 on my macbook. It did recognize my Aluratek Libre the first time I used it but now it does not. I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre. Help pls

    If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
    If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
    Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

  • I bought the season 7 pass for Doctor Who, but the new episodes are not showing up for download.  Who can I contact to find out why?

    I bought the season 7 pass for Doctore Who, but the new episodes are not showing up for download.  I've been all over the support page, I even looked up my purchase history and there is are none showing and I even bought last weeks episode, The Bell's of St. John.   Who can I contact to find out why I'm not getting the rest of season 7 for download?
    Thanks,
    ChristyQ

    Garmin is sending you to Apple because it is Apple that would have to give you a refund as the actual point of sale.  However, Apple states all sales are final.
    Apple is sending you to Garmin because it is Garmin's fault their maps are out of date and Apple doesn't write the software.  They may not even be looking that deeply and simply perceiving it as a programming "bug" it is up to Garmin to solve.
    Who know whose fault it is that Garmin isn't getting up to date data to put in their maps.
    Ultimately I think you stand the best chance in getting a refund from Apple though it isn't guaranteed.  Apple is the cashier.  You just have to convince them this isn't just a line of code omitted from an application and isn't something that will be soon corrected by Garmin.  Make it clear it isn't a problem with the application running on your device, it is a problem with the data it contains.  Either that or you have to hope Garmin will feel so bad about it they will delve down into their slush fund and send you a refund.

  • Plugins & sampltank not showing up for use?

    Hi there, I am still having trouble with plugins, can anyone help?
    Firstly, after installing and ensuring the AU ones are installed, my plugins do not show up for use in channels etc. they work perfectly in both Bias & ProTools though.
    i) I downloaded the waves demos for a 14 day trial and Logic doesn't find them, do I have to do something manually for them to be noticed?
    ii) Sampletank2 does not show up either (AU installed). I downloaded the free version and it DOES show up.
    Argh...
    G

    OK, last I checked the Waves passed Validation (I am not a Waves owner) so the demo version may be older-if you are considering purchasing them make sure you get all answers about AU Validation from Waves.
    Another thing: Logic Pro comes with a great suite of Plugins. You may want to consider that alternative if you were thinking of buying Waves.
    What do you mean it should have happened at startup? It should have validated or they should have passed validation?
    Cheers, J

  • Why are TV show episides for last three days not showing up for purchase on iTunes?

    TV episodes for 10/25 and 10/26 are still not showing up for purchase in iTunes. Am I the only one? The latest episodes that show up are from last Thursday. What gives?

    I am also having the same exact problem.  Put in a ticket with Apple 2 days ago when I first noticed the problem.  No one has contacted me reagarding this, and you can't get anyone on the phone!!! So frustrating!!! I went back and put in a dispute for all episodes that charged me and I was never allowed to watch, some season passes others were single episodes.  All in all Apple owes me about $150 as of now.  We are an Apple family, love their products, but this is ridiculous!!! Glad I'm not the only frstrated party, hoping there is some resolve. Really would like to get what I paid for!!!!!

  • Thumbnail on Provider Page not showing up for a new collection

    Hello:
    The new MacLearning collection: iTunes U Munich Conference  http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=445693522    has a thumbnail when you go to the collection page.  However, this collection is currently featured on Duke's Provider Page under the "What's New" section http://itunes.apple.com/us/institution/duke-university/id420416991 and the thumbnail is not showing up for that collection.  How can we get that thumbnail to show up on our Provider Page?  Why is it not showing up?
    Thanks for your consideration,
    Meg 

    There are two more collections on our Duke University iTunes U page that have collection artwork that is not updating.  Here are the examples.
    Duke Human Rights:http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=420543608
    Electronic Tectonics:http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=420545217
    Both of these collections have newly uploaded thumbnails (uploaded many months ago)---but those thumbnails aren't reflected on the Tag page that houses these collections.  These collections are in the John Hope Franklin Humanities Institute Tag Page here:http://itunes.apple.com/WebObjects/DZR.woa/wa/viewTagged?id=420416991&tag=John+H ope+Franklin+Humanities+Institute
    But, the thumbnails on the Tag page are the old thumbnails, not the newly uploaded ones.  How can we make sure the newly uploaded thumbnails are refreshed and showing up?
    Thank you!
    -Meg

Maybe you are looking for