A point to clear from note 823587.1

Current Environment:
=============
2 Nodes ("Node-1" and "Node-2") for database tier.
2 Nodes ("Node-3" and "Node-4") for application tier.
EBS Version: 12.1.3
Database Version (On "Node-1"): 11.2.0.3
We installed db on "Node-1" and apps on "Node-3" and "Node-4". We are currently using 1 of 2 nodes of apps-tier as "Load balancer" has not been installed yet. "Node-2" has nothing but OS and pre-requisites. We upgraded our environment as follows:
Database from 11.1.0.7 to 11.2.0.3
Application from 12.1.1 to 12.1.3
Next task:
======
Now we've to implement 11gR2 (2 Node) RAC and utilizing "Node-1" and "Node-2".
Issue:
====
We are referring following metalink note:
*Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]*
but we have a confusion in our mind that as we've database already installed(both software and dbfs) in 1of 2 database nodes
i.e "Node-1" but the RAC install guide says to deploy grid infrastructure first, then oracle (software only). Do we have to follow the Single instance to RAC conversion steps also? or some other consideration is required to keep for this?

Do we have to follow the Single instance to RAC conversion steps also? or some other consideration is required to keep for this?If you are running on a single instance (database), then you need to follow the single instance to RAC conversion steps.
Thanks,
Hussein

Similar Messages

Function module Global variables not cleared from memory?

Hi,
This is may be simple & stupid question ( after posting 4242 posts ):)
" Declaration in TOP
data : begin of i_y1yatt occurs 0.
        include structure y1yatt.
data : end of i_y1yatt.
types: begin of t_yatt71.
       include structure yatt71.
types: tcode like sy-tcode.
types: dflag type c.
types: end of t_yatt71.
data : i_yatt71 type standard table of t_yatt71
               with default key with header line initial size 0.
This is code in the function module.
loop at i_y1yatt.
    move-corresponding o_y1yatt to i_yatt71.
    if i_y1yatt-werks eq 'N501'.
       move space to i_yatt71-werks.
    endif.
    append i_yatt71.
    " Here this internal contains the previous entry
    clear i_yatt71.
endloop.
This function module is called 25 times in a minute.
My problem is this
For example : 1st tranmission is called this fm with 50 records,
and 2nd tranmission is called fm with 10 records.
My results are showing
last record in the 1st transmission is still on the memory while calling 2nd transmission. ( Here in int table I_YATT71 still contains the 1st transmission's last records during the 2nd tranmission call)
As per my knowledge if each time calls comes in to fm all gloabl variables get cleared. but some how this not happening.
Anybody come across this scenario.
PS. I know i need to use clear statement within the loop as first statement.
a®

You must understand that when calling a FM, you load the entire function group into memory. IF there are global variables, then they are "alive" for the entire duration of the program execution. Meaning if you call the function numerious times, or even if you call another function within the same function group, the functions still have access to that same global variable space, so it must always be cleared manually by the developer at the required points. You can not rely on the runtime to clear the global variables at the end of the function call. So you should clear all you globals as the first operation in your function module call, if that is what is required.
Is this clear?
Regards,
Rich Heilman

Oracle.oc4j.sql.managedconnectionimpl objects are not cleared from the JVM

One of our customer is facing the outofmemory issue, when they connect many users and they go ideal for some times, without doing any operation on the server and when they come back and connect they get Out of memory issue.
For that i just profiled my application and i can see the following objects never get cleared from the JVM.. Following objects not GC.
oracle.oc4j.sql.spi.managedconnectionimpl
oracle.oc4j.sql.xa.iccxaconnection
oracle.oc4j.sql.spi.connectionrequestinfoimpl
oracle.oc4j.sql.managedconnectionimpl
oracle.oc4j.sql.spi.Txstate
oracle.jdbc.driver.logicconnections
We do have a pooling timer running at the back end.
Please suggest is there any why i can make these connections Garbage collected when they are not in use? is there any setting for in oc4j for that?
Thank you

One of our customer is facing the outofmemory issue, when they connect many users and they go ideal for some times, without doing any operation on the server and when they come back and connect they get Out of memory issue.
For that i just profiled my application and i can see the following objects never get cleared from the JVM.. Following objects not GC.
oracle.oc4j.sql.spi.managedconnectionimpl
oracle.oc4j.sql.xa.iccxaconnection
oracle.oc4j.sql.spi.connectionrequestinfoimpl
oracle.oc4j.sql.managedconnectionimpl
oracle.oc4j.sql.spi.Txstate
oracle.jdbc.driver.logicconnections
We do have a pooling timer running at the back end.
Please suggest is there any why i can make these connections Garbage collected when they are not in use? is there any setting for in oc4j for that?
Thank you

Limit Shopping cart not cleared from sourcing.

Hi All,
We have an issue with the Limit shopping carts in sourcing. After the folllow on document [PO] is created successfully through Sourcing, the SC still shows up in the sourcing cockpit. The job BBP_GET_STATUS2 is running properly. In BBP_PD, we have the status I1113 - Follow-on Document Created.
This happens only to the limit Shop.Carts and the normal SCs are cleared from the sourcing cockpit, as soon as the PO is created.
Any suggestions?
Thanks!

As per standard after creating folow on document , the sc should not stay in cockpit/
is it happening for all cart?
what is the sourcing indicator value for that cart
br
muthu

TS1424 Download error - Tap to retry...... will not download, clear from screen on phone. Song shows up on laptop, plays for about 2 seconds. Can't clear off of phone or download

Won"t donload or clear from downloads on phone. Shows it downloaded on laptop, but plays 2 secs. then advances to next song only on laptop. Not shown on phone at all.

Hello Bdev15,
I would be concerned too if the songs I purchased from iTunes were not downloading to my iPhone. You have taken some great troubleshooting steps already, and thank you for providing the details of the steps you too. I have a few additional suggestions to get it downloaded to your iPhone.
First, I recommend checking to see if the download was interrupted:
If your download was interrupted using your iPhone, iPad, or iPod touch
From the Home screen, tap the iTunes app.
For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
Enter your account name and password if prompted.
Tap the blue download arrow to resume.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
If the songs still do not download, next I recommend downloading the songs when connected to another network. For example, if you are using the cellular network, you could switch to Wi-Fi, or you could try an alternate Wi-Fi network. Follow the steps in the section titled "iPhone, iPad, or iPod touch > Music" in the article below to download the songs:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If you are still not able to download the songs, you can report an issue with these purchases using the steps in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Best,
Sheila M.

I know this is supposedly not possible, but I need to retrieve a specific voicemail from my iPhone which was also "cleared" from the Deleted Messages box. Any suggestions?

I know this is supposedly not possible, but I need to retrieve a specific voicemail from my iPhone which was also "cleared" from the Deleted Messages box. Any suggestions?
This is highly important. I know the number from which the voicemail arrived, but have not been able to figure out how to retrieve it. I accidentally had the voicemail in the Deleted Messages folder, and then Cleared this folder. If there is any possible way I might be able to retrieve this message, even if there is a cost associated with it, please help me.
Thank you.

I think you maybe able to restore from backup if that voicemail was included in the backup. http://support.apple.com/kb/HT1766

I am making my first keynote presentation. I transferred the slides from a power point. I did not use a 'theme' from keynote. Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu. What have I done wrong

I am making my first keynote presentation. I transferred the slides from a power point. I did not use a 'theme' from keynote. Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu. What have I done wrong

When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works.

Clear from Realmac Software will not sync anymore

I use Clear from Realmac Software on iPhone 5S/iOS8, iPhone 4/iOS7.1.2 and iPad 2/iOS7.1.2 all of them with the same iTunes ID.
On the 5S I've updated to iCloud Drive and as far as I know from here iCloud Drive and iCloud uses different servers for Documents & Data.
It results in no possibility to sync between these devices.
So, my question is: is Apple gonna merge these servers so that Documents & Data from one can sync to the other?

I understand that and read all those things.
I just want to know if in the near future, servers used for iCloud Drive and iCloud will be connected.
Is there a way to get back to iCloud?
Resetting my device will work?

Cleared items not appearing When we click cleared items in T.code FBL3N

Hi all,
        We have prepared one ABAP program, to clear all open items for a particular GL account, company code, period, fiscalyear,
         When we run this program, the open items are clearing but not appearing in cleared items,
         Can any one help me out on this........
Appreciated with points...
Regards,
sai........

Hi,
Check the cleared items in table BSIS, if the items are clearing then those items should appear in this table. Otherwise i doubt your program is not working?
Debug the program and check from which tables its selecting the data ie it should select the GL open items from table BSIS.
Raj

Issue with fixed point number output from 9219 module for full bridge measurement (cRIO/FPGA)

Hi,
I have a question regarding the fixed point output acquired from a 9219 module (in FPGA on a cRIO) when setup to acquire a strain measurement (full bridge).
Software: Labview 2009
Hardware: cRIO-9012 (NI-RIO 3.2.1), NI-9219 module
The 9219 module is configured in the project as follow:
Ch0: Full-Bridge +/- 7.8mV/V
Ch1: Voltage +/- 4V
Ch2: Voltage +/- 15V
Ch3: Voltage +/- 60V
The calibration mode is 'Calibrated' so the FPGA outputs fixed point numbers.
My issue is that the precision of the fixed point number for Ch0 (strain) is "(fixed point <+/-32,-1>[-2.5e1,2.5e1]:1.16e-10)", which indicates that the fixed point number is a value between +/- 0.25 and not the +7.8mV/V as I expected?
The fixed point number does not change in precision whether the range for the strain measurement is set at +/- 7.8mV/V or +/-64mV/V (the two available options).
As the fixed point number doesn't change precision I'm assuming that changing the range of the strain measurement changes the resolution of the acquired number? And as such I will need to perform additional scaling on the fixed point number to convert it to the expected range?
There is no mention of scaling of the voltage or strain measurements mentioned in any documentation or examples, with the only scaling example provided for the thermocouple measurements.
Any help/clarification is much appreciated.
Regards,
Mike

Hello Mike,
Hopefully I can help clarify some of the behavior you are seeing.
My issue is that the precision of the fixed point number for Ch0 (strain) is "(fixed point <+/-32,-1>[-2.5e1,2.5e1]:1.16e-10)", which indicates that the fixed point number is a value between +/- 0.25 and not the +7.8mV/V as I expected?
For calibrated values on the FPGA VI, the returned data is a Voltage measurement, not a directly calculated strain value. Based on the specified ranges for the 9219 in a Full bridge configuration, 250 mV will encompass all possible input values, at the module provided excitation (2-2.7V dependent on the sensor gage resistance).
The fixed point number does not change in precision whether the range for the strain measurement is set at +/- 7.8mV/V or +/-64mV/V (the two available options).
As you may notice from the fix-point definition, the fixed point data contains 32-bit precision which is larger than the acquired precision of 24-bits provided by the 9219. The fixed point data-type is coded to accept input encompassing both the range and precision of the instrument; such that, no additional coercion of the input data values is required based on user-defined software settings, i.e. the bridge sensitivities +/- 7.8mV/V or +/-64mV/V.
As the fixed point number doesn't change precision I'm assuming that changing the range of the strain measurement changes the resolution of the acquired number? And as such I will need to perform additional scaling on the fixed point number to convert it to the expected range?
The documentation does not clearly define that by varying the discrete levels of strain input (+/- 7.8mV/V or +/-64mV/V) the range of the ADC on the module is also adjusted. I am working to follow up further on this topic, to provide a clarification on the module documentation. As for scaling, the voltage values acquired regardless of the ADC resolution will still be related strain via the bridge sensitivity. The resolution of the ADC will simply define the smallest measurable change in the strain value.
There is no mention of scaling of the voltage or strain measurements mentioned in any documentation or examples, with the only scaling example provided for the thermocouple measurements.
For converting the acquired voltage values to a strain measurement, I would recommend the documentation linked here for a detailed explanation on strain calculation. Often, users will forward the acquired voltage data as fixed point values through a DMA FIFO to the RT controller on the Compact RIO; such that, they may handle conversion from voltage to strain using floating point math in real-time.
I hopes these responses provided a bit of clarity. I will continue to work to provide additional information on the 9219 specification information. Please post back any further questions.
Cheers!
Edit: Forgot to add the link.
Message Edited by Pcorcs on 04-14-2010 04:55 PM
Patrick Corcoran
Application Engineering Specialist | Control
National Instruments

Clearing from payment lot(FP05) and cash desk

Hi ,
Background of the issue: when we post from payment lot or cash desk account clearing happens( clearing open items).
Issue: My client has a requirement when the posting is done for a particular account from above two (payment lot or cash desk) clearing should not happen for the open items (documnets)which has any payment method on the item(document)(like P-payed by phone).
For me it looks like ,this issue can be handled using customer module in clearing variant.but can some one let me know which module should be called?at what step of the clearing variant?I don't have much knowledge on clearing Variants.(I am not sure this is right approach)
Also please suggest other solutions? Again this process (avoiding clearing open items with payment method)should be triggered only when posting is done from payment lot and cash desk.
Thanks,
Shiv

Dear Shiv,
For me the best way is use the event FKK_SAMPLE_0262 if you dont need the Payment send to clarification....
But their is others ways ;
1 - Event FKK_SAMPLE_0110 this is for all Payment ( You can Clear the Internal Table by validating that you need t_fkkcl )
2 - events by the varinat of conpensations FKK_SAMPLE_TFK115 /FKK_SAMPLE_TFK116
I hope it help
Andre Frugulhetti

Macbook Pro Retina EFI update 1.2 doesn't clear from software update list after installing

I've had this problem for a few weeks.
I install the update via the App Store, the system restarts, but afterwards I get a notice from the App Store that the same update needs to be installed. If I look further down the list of installed items it does record the update as being installed, but I'm not sure if it was really installed.
Note: I have tried to install the update manually w/o the App Store, but I still get a notice from the App Store after restart that the update needs installing.
This isn't huge deal, but it's kind of annoying that I'm not sure if the update was installed or not, and frankly, my OCD kicks in whenever I see that this update is still not clearing from the list of items to be installed.
By the way, the update has to do with the nvidia card not losing performance after the computer wakes up.
Thank you

Hi there
However, I spoke to Apple and was given the following advice:
==
Thank you for contacting Apple.
Based on the details you provided, we think you might find the following information helpful:
OS X Mavericks: Reset your computer's PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Sincerely,
Apple Support
==
Try resetting the PRAM and please report if the freezing trackpad happens again. Please post in the following thread:
https://discussions.apple.com/message/23775003?ac_cid=tw123456#23775003

Automatic clearing from one account to another

Hi,
I have a g/l account that I want to automatically clear each month to another account? Is that possible? I know about f.13, but I am interested in automatically transferring an entire balance each month from one account to another.
Thank you

Hi:
Are these both accounts maintained on Open item management? If yes then you can do the balance transfer manually using F-04 (post with clearing button). Automatic clearing will not cater your requirement since it clears the GL balances as per specified criteria in OB74 . For automatic balance transfer i guess .there is no such way to do in SAP.
Regards

How to Add points on graph from a text File ?

Hello and Good Morning to all,
I have a text file with my data and i read them by using the Read From Spreadsheet File VI,i enter the path where my file is saved,read all rows delete the first row because i don't need it and my problem is that in the text folder i have specified date and time which i want to be my X axis in my Graph and Y axis to be the Vout that means i have to use a XY Graph ,below you can see my data:
Date        time              Vout
3-9-2012 7:45:37            2,35
3-9-2012 7:45:39            2,75
3-9-2012 7:45:41            3,15
3-9-2012 7:45:43            3,50
1) Is the text file format compatible with the input of the graph command?
I do not find a LabVIEW function which convert the “date” from the text file (example:3/09/2012 07:45:37) into a compatible format for X axis for the graph.
(Conversion from string format => into a “date and time” format)
Can someone please provide a code solution for this problem?

Hi gstathatos,
                         See all the threads given below:-
                         http://forums.ni.com/t5/LabVIEW/Add-points-on-XY-graph-with-time-step-not-constant/td-p/1507066
                         http://forums.ni.com/t5/LabVIEW/Add-points-on-graph-from-a-text-File-Date-and-time-include-in/td-p/1...
                         http://forums.ni.com/t5/LabVIEW/read-double-waveform-text-file-and-and-plot-graph-in-labview/td-p/10...
Thanks as kudos only

Shipping point is missing from automatic delivery for external operation

Hi All,
I have tried to do one operation vy external processing. All the configuration and master data done. But during the goods receipt for the material from vendor after processing (t code MIGO) system is providing message as "Shipping point is missing from automatic delivery".
1. In the control key, automatic GR is not there, so from where automatic delivery is coming?
2. I have maintained the shipping point for the plant as plant in SPRO>LOG Exe> Shipping> Shipping point and goods receiving point determination> Assign good receiving point for In bound deliveries.
Please provide the solution.
Thanks
Krishna

Dear friend,
As far as i know:
1. check out the shipping point assignment to plant : t-code OVXC ; just in case make sure your shippong point is correct - goto spro->enterprise strucutre->definition->logistics execution->def.,copy,del,check shipping point
2. make sure your SC (shipping condition) and loading group are correct in the "Shipping point determination";
also make sure you did GR points assignment correctly (the next item in IMG)
good luck!

A point to clear from note 823587.1

Similar Messages

Maybe you are looking for