A problem when installing the RFSA/RFSG for PXIe-5644R

When I intall the software "NI-RFSA/RFSG for PXIe-5644R",there is always a problem,that says——
NI-RFSA Instrument Driver Support
This installer could not detect a supported version of NI-RFSA. To develop and run applications for the NI 5644R using the NI-RFSA instrument driver, exit this installer and install NI-RFSA 2.5.2. Then, re-run this installer.
but I surely have installed the NI-RFSA 2.5.2 before. This problem bothering me for a long time.I really want to know how to solve it.Thanks.
Attachments:
The problem.png ‏114 KB

Greetings,
I am sorry for the trouble you're having installing this software. Can you post a copy of your installation log? I can take a look at it and hopefully get to the bottom of this.
It should be located here:
C:\programdata\national instruments\installation logs
Thanks,
James D
Product Support Engineer
National Instruments

Similar Messages

I have a problem when installing the Developer Suite

Hello,
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.
Please help me with this :(

Hi user;
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.What is your OS? If you are linux-unix level you are making installation wiht same user of Oracle Db11g? Did you try to create new Oracle_home and set it before start installation?
Regard
Helios

Error when installing the Integration Kit for SAP

Hello,
When installing the integration Kit I get the following error:
The installation of BO XI Integration for SAP Solutions cannot continue because WACS has been installed with BO Enterprise.
i have seen in BO-SAp Integration Kit Installation Error that I have to had selected the point Install Tomcat application server option, but I was not asked to.
I'm following the blog BusinessObjects and SAP - Part 1 of 4, and my installation screens are similar but not equal. for example, I fon't have the installation type new, but the quickk type. And I cannot select the database, too.
Of course the screen asking about the Web Application server with the option of installing the tomcat application server doesn't appear.
What have I done wrong?
What is the solution? Reinstalling everything but doing what?
Thanks and regards,
Ana.

Hi Ingo,
Yes, it is BO Edge.
I have deinstalled the BO Edge sw and now I have installed it again. This time I have selected the export installation type and I have select the TOMCAT. The installation has finished successfully, but when installing the SAP integration Kit, I have the same problem. The message about the WACS already installed appears again.
What else can I do?
Thanks and regards,
Ana.

Problem when changing the target quantity for a contract

Hello,
I have a problem when i try to change the target quantity for a contract through the BAPI 'BAPI_CONTRACT_CHANGE'.
I filled the tables 'item' and 'itemx' with new values. the BAPI 'BAPI_CONTRACT_CHANGE' returns no error, but after using the BAPI 'BAPI_TRANSACTION_COMMIT' I get an info message from SAP and the modification does not pass.
In debugger I could locate the error. In fact, the appeal of FM 'ME_UPDATE_DOCUMENT is done with a table XEKKN with the new values of the quantity and a KZ code equal to ' I ' to insert, then it must have the value ' U 'for update .
Is someone can help me to solve this problem?
Thank you in advance.

Have you tried selecting the page, and then changing the theme directly on that page?

Problems when installing the SAP Netweaver 2004s Trial version on Fedora 9

Dear all,
I have been trying to install the SAP Netweaver 2004s Trial version on Fedora 9, 64 bit, x86_64, but have not been able to accomplish this correctly.
New to the Linux environment as well, and hence not completely sure about the issues here. According to the steps outlined for the installation, i downloaded and installed the IBM Java SDK and then executed the install.sh script file from the download.
The installation went well, but when i try to start the sap system using the command startsap, i get the error message command not found.
Could anyone please guide.
Thanks,
Dabre

> The installation went well, but when i try to start the sap system using the command startsap, i get the error message command not found.
as which user did you execute that command?
Markus

Problem when installing the Apple Security update 2008-02

I just installed the Apple Security update 2008-02 in my server and now it's giving me problems!
It strips off the server's settings pane (where you can see the serial number) in Server Admin and keeps the "Sharing" button in the Workgroup Manager thus preventing me to do change file permissions!
I also cannot remotely administer it with server admin 10.5 as it says: "Unable to proceed. The server has returned bad version information and can't be administered with server admin right now."
What the * happened??
Please help! (crying)

Yes.
Anyway, I have resolved the issue. I just re-installed the the Mac OS X Server 10.4.11 combo update and everything goes back to normal.
Thanks for the help!

Problem when saving the Data basis for the Consolidation

Hi Gurus,
I am having 2 problems.
1) When i try to execute the UCWB transaction . It gives an information message
" Data basis DB needs to be generated (after upgrade) . I am following the procedure given in that "<b>Run maintenance of data basis DB in display mode. Go to the "Data Streams" tab page. Choose the "Generate" button.
If changes to Customizing settings are permitted in the current system or client, as an alternative you can maintain the data basis in change mode and save. In the case of systems supplied with Customizing transports, as an alternative you can generate the data basis in the source system and then transport it again.</b>
Even after doing that procedure when i again execute the UCWB. it give me the same message.
2) when is try to save data basis for the consolidation . it give me this error message.
"Field 0HC_ATCCODE: This compound differs from that of basic field 0HC_MEDCTG"
I have checked the referenced Info objects . Checked the compound info objects. Activated them again. They dont differ in any way. but still i get this problem.
Please help me out. If someone has come across this error and solved. Please help me.
Regards
satish

Hi satish,
I constantly receive the message like your #2 saying that it was a critical change in X infoobject. It's just a warning and I found several OSS notes saying that this message is not correct. Just ignore it.
In case of your Q #1. The data basis might be generated in two ways: by pressing Save icon and by clicking the Generate icon (the system refers just to this very option) and then - Save. The last way is used in Productive environment. Try it.
Hope this helps.

Problems to install the logitech driver for Webcam HD C 615

I have problems with the installation of the logitech cam driver for mac. Can anyone tell me how to fix it? Thx.

If you are using the most current Mac software that Logitech offers but still having trouble, try searching or posting in the Logitech forums.
If all else fails, contact Logitech Support. They should best able to help you get their non-Apple product working with your Mac system.
Message was edited by: EZ Jim
Mac OSX 10.10.2

Problem when instaling the SJAS 8 beta on windows xp

After downloading the setup file,
i have this error message
"There are no file requiring installation"
Please help.

I have found that there is difference between size on site and the one which gets downloaded. I have tried to download 4-5 times however each time i got almost 40mb-44mb BINARY while on site it shows it is of 106-113mb, let me also tell u that there is no problem with my internet connection & there is no network problem, as after completing download i was able to view the mesg that 106.5MB has been downloaded & saved to the disk.
pls. help me out..

OC4J Instance Failed when installing the SSO against FMW OID 11g

Hi All,
We are facing an problem when installing the SSO against OID 11g. The error is OC4J Instance Failed.
In Installer log it is showing Target Invocation Exception.
Please anyone advise.
Thanks in Advance.
Vaasu.

Hi All,
We are facing an problem when installing the SSO against OID 11g. The error is OC4J Instance Failed.
In Installer log it is showing Target Invocation Exception.
Please anyone advise.
Thanks in Advance.
Vaasu.

I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see spec

I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW025, DW050 ... WARNING: DW024, DW025 ..., please advice me the step to re-install the Pro-X. Thanks

Please follow Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Do let us know if it worked.
Regards
Rajshree

Has anyone had a problem installing the AdobePatchInstaller.exe for Raw images?

Has anyone had a problem installing the AdobePatchInstaller.exe for Raw images?

ssprengel;
The message displayed when attempting to install is "Adobe Application Manager may be damaged. Download and install a new copy of Adobe Application Manager.".
Which is not the case.

TS5179 I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update (PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it. #out of space...??)

I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update, 11.4.62 (on a PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it (Ugh). First result Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there. Second result, upon installing iCloud again, I have two iCloud contact files shown in outlook - "iCloud" & iCloud, within iCloud". 1,332 & 1,385 contacts respectively.
Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. This is NOT fun at 72-yrs old...!!
So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ

Interesting response, Kappy - Back to original post: "First result: Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there (therefore, initially I had lost my contact file from Outlook). Second result, upon installing iCloud again, I now have two iCloud contact files shown in Outlook - "iCloud" & iCloud, within iCloud". W/ 1,332 & 1,385 contacts respectively.
Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. This is NOT fun at 72-yrs old...!!
So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ"
You can safely assume that I have tried using it!   So, to make things a little clearer:
     1) I now have two iCloud "contacts files", w/ a different total count. What's the difference? Why the different toatl count?
     2) Since re-installing the Apple software (part of the MSVCR" recovery instructions) "couldn't possible affected Outlook", why am I getting an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. What's in those files? And where are they?
Probably more important questions get down to:
     3) Why is a basic Apple product upgrade "screwing-up Outlook"? This iTunes upgrade, failing to install properly forced Outlook 2007 into a 2-min start-up cycle. Which was fixed with this "Goat-Rpdeo" of re-installing MSVCR80.dll.
     4) And under the latest release of iOS-7.0.4 on our iPhones, why is Apple now forcing us to use the iCloud to back-up our contacts, calendars & tasks, vs. allowing these files to be backed-up directly on our PC's via the USB cable?
Thanks again for your interest and comments. - Russ-AZ

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
Clinton

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

A problem when installing the RFSA/RFSG for PXIe-5644R

Similar Messages

Maybe you are looking for