A problem with Client Security Solution patch for Mozilla Firefox3

After I updated Client Security Solution to 8.20, the password manager cannot work in FF3 again.When I tried to reinstall the patch, it asked me whether to overwrite the files or cancel.  Then it indicates 'This patch has already been installed on this computer', but the problem exsits.

Borntofly, I am glad that you brought this up as I have not been able to successfully use FF3 with CSS 8.1 or 8.2 and have provided feedback in this thread:
http://forums.lenovo.com/lnv/board/message?board.id=Special_Interest_Utilities&thread.id=937&view=by...
As much as I would like to upgrade to FF3, I have not had any success in either using the manual configuration changes noted in the above thread or by using the CSS Patch for FF3 provided by Lenovo on 8/6/08 found here:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70132
This patch appears to duplicate the manual efforts provided by member KTP in message 12 in the above provided link from what I can see.
I have never had an issue using the TV password manager and IE7.  It is a very reliable combination.
I have no issues at all using FF 2.0.0.16, CSS 8.1 or 8.2 (now on 8.2), and Thinkvantage (TV) Password Manager 3.00.0106.00 (came with CSS 8.2).  I have never had Lenovo Password Manager on my T60.  Everything works reliably well with this combination.
In 3 hours of work yesterday, I was able to get TV Password Manager to show up in the FF3 add-ons as TV Password Manager 3.01 and this is the only way I was able to make it work, but only for a single browser session:
1. Tools --> Add-Ons
2. Disable TV Password Manager, then restart FF3
3. Tools --> Add-Ons
4. Enable TV Password Manager, then restart FF3
5. TV Password Manager will work for the duration that I am using the browser session
Once I close FF3 and reopen it, TV Password Manager no longer works.  The only method I have found to "reset" everything is to perform the above sequence, but again it only works for the single browser session.  It is very consistent.  Although in does not show this in the Add-Ons page, it almost appears that the TV Password Manager add-on is disabled after I close the browser and needs to be manually disabled then enabled as noted above.  If this is due to a conflict with other software on my laptop, I have not been able to determine this.
In my efforts yesterday, I spent time uninstalling CSS 8.1 or 8.2, FF, and even removed registry entries related to these packages in order to start with a fresh install, all without any success.  I tried fresh installations and added the manual changes promoted by KTP and also tried fresh installations using the Lenovo patches, all without success.  I made attempts to troubleshoot to root cause by removing all add-ons except TV Password Manager, and also tried preventing certain software from installing at startup via msconfig, as well as multiple settings changes within FF3, all to no avail.  Again FF 2.0.0.16 continues to work very well with little effort on my part.  I simply install the software and ensure that TV Password Manager 2.0 in installed in the add-ons and that's it.
In the above FF3 thread, it appears that others have had success with KTP's changes so I am a little frustrated that I cannot make FF3 and TV Password Manager work reliably.  I have FF2 and IE7 working so I have plenty of good alternatives at this time.  I will post this at the FF3 above as well to see if anyone has any feedback. 
Moderator(s), do you wish for this thread to be integrated in the original thread for this issue?
T60, 8744-5BU: 2.0 GHz T7200, 4 GB RAM, 15.4" WSXGA+, 1680x1050 ATI Mobility Radeon X1400, Win 7 Ultimate w/SP1 - 64-bit

Similar Messages

  • File Encryption with Client Security Solution

    Hello,
    We've been using ThinkVntage Client Security Solution for file encryption for a while now.  I'm setting up some new laptops running Client Security Soliution 8.2 and I can't seem to find the option for data protection/file encryption.  I checked a ocuple of users that are using file encryption and they were running Client Security Solution 7.x.  Did they remove this feature from 8.x?  

    Unless the latest edition was released before my previous post then your statement is incorrect.  My computer was using the latest edition because I downloaded it form your site only a few days before the post.  Since my initial post I have had to replace my laptop and Lenovo, unfortuantely, treats Canadians like **bleep** step children so I had to buy an HP.  If you can pass on a message, Lenovo lost the sale of a very high end system a few days ago becuase of a corporate choice to only sell a stripped down selection of computers to Canadians.  You have a good 5 years or so now to think on that and come up with a better solution than cripling your Canadian resellers.

  • Problem with Client Security Password Manager won't let me open it?

    Win7
    32-bit
    IE-10
    Client Security Password Manager 8.30.0057.00
    It allows me to save passwords.
    It will not allow me to get into the program to check/edit/delete the password info.
    Fingerprint software 3.3.2.43 is working correctly.
    Also does not let it auto-fill.
    Have tried un-installing and re-installing.
    Please advise.
    Thanks!

    Hi 
     You could try the new password manager.
     http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS031504
    Or you could try to delete all the files,
    Find Client Security Solution in user profile folder (Search hidden), and delete them all.
    And restart system.
    Before doing this, remember to export passwords

  • Client Security Solution password problem

    I have just had my computer reformatted to the factory settings. I wanted to avoid having to enter my password each time I logged in but, as has happened before, I forgot what the process was. Eventually I made my password blank and did something else (?) which meant that I wasn't asked for a password by Windows. Unfortunately Client Security Solutions now asks me to validate my identity ("Your Windows password was changed recently. Please enter your Windows password to synchronise with Client security Solution".)
    I have just given myself a new Windows password and will see how it goes with Client Security Solution once I reboot. My basic aim is to bypass the Windows password screen.

    Since my last message I have reset my Windows password. I no longer get the message from Client Security Solution, instead Windows tells me that I have entered the wrong password. All is OK if I then enter the new password.
    Perhaps this query should be placed on a Windows forum? I have set Windows to bypass the password entry screen, so If it weren' for this problem I would never have to enter a password.

  • Help with setup of the X60s Client Security Solution

    I recently restored my X60s HDD using the Product Recovery CD from
    the Lenovo Service Center here in Singapore.  Prior to the recovery
    I had to reset the Security Chip thru the BIOS setup.
    I did not setup any password in the system during the recovery
    process.  Part of the recovery process I did was to upgrade the
    Rescue and Recovery (R&R) to Version 4.21.0016.00 and the Client
    Security Solution (CSS) to Version 8.20.0023.00
    Now that I have restored the Windows XP system and all of my
    application software, I tried to setup my Windows password and also
    use the CSS for added security of my notebook.
    When I initiate the CSS, it ask me for my Windows password so that
    the userid can be enrolled in CSS.  When I enter the password and
    press the OK button, I got this message ... "The user could not be
    enrolled with Client Security Solution"
    I think that the error is related to the resetting of the embedded
    chip, called the Trusted Platform Module (TPM) in the notebook.
    How do I now resolve this issue of using the CSS?
    By the way, I just bought my X60s last Aug 23 2008 and the reason
    why I had to recover my HDD is also because of the problem with the
    CSS password which for some reason it always fails to authenticate.
    Regards
    Rodney

    railman wrote:
    I have a Zen Micro 4GB setup and working great on our desktop computer. I have the Creative Media Source v3.0.9 and Zen Micro Media Explorer v4.00.22 software installed. I purchased two Zen Micro 6GBs at Christmas for my kids. I have been through the manual and these forums, but no help on how to setup the two new Zen Micros to work with the existing software. The new Zens do show the popup "Creative Media Device Detected", and I can see the new Zens in Windows Explorer. The new Zens do not show up in the Zen Micro Media Explorer. Do I have to install the Zen software for each of the three Zens? If not, any ideas? Thanks
    It appears that you may have both PlaysForSure Zen Micro and non-PlaysForSure Zen Micro. As such, you should install both plugins for MediaSource. A newer version of MediaSource is also available to you.
    Here is what you should do:
    - Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site.
    - Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource from your product download site.
    - Download and install the latest Creative MediaSource Plugin for PlaysForSure devices (version .00.8) from your product download site.

  • How do I launch and Reset Client Security Solution?

    W510, Windows 7 Professional, 64 bit, and I like using the Password Manager feature with fingerprint security.  During a recent printer installation I had to set-up a Windows Password (I never had one before). Now upon logging in, Client Security Solution continually provides error message ("Your windows password was changed recently. Please enter your Windows password to synchronize with Client Security Solution" - but it doesn't recognize anything I enter, including the current password. I can ignore the message but now I am locked out of some encrypted files.
    Lenovo Document ID#HT004617 correctly addresses this problem; but I'm stuck on their Solution Step #4 (Launch Client Security Solution) -  I'm supposed to launch the program, click advanced, and then select "Reset Security Settings."  Problem is there are over 4 dozen executable files in the (2) qty Client Security Solution sub-directories (c:/program Files (x86)/Lenovo/Client Security Solution and c:/Program Files/Lenovo/Client Security Solution) and I have yet to find one that properly launches the CSS program. (CSS is not available from the Lenovo ThinkVantage Tools menu). 
    How do I start CSS?  
    I keep machine up to date, ThinkVantage Fingerprint software #5.9.3, PW Manager version 3.20.0335.00. Machine is under warranty but Lenovo Support thus far unable to tell me what to do!
    I'm sure somebody here knows the right CSS file to run, and specific procedure to synchronize the Password, would sure appreciate some help on this, thank you!
    Solved!
    Go to Solution.

    Been away working, now back...
    It was an HP8500 Printer that started all of this.  I find it difficult to believe that a (simple?) printer install could do so much collateral damage...
    BACK TO MY ORIGINAL QUESTION - How do I reset CSS?  Per furnished Lenovo documentation, (found on the hard drive) CSS was never installed on Windows 7 machines (for some Lenovo reason).  I can export PWs to external drive but still have no idea how to launch the CSS files (of which several executable files came pre-loaded on my machine).
    As far as being locked out of files, Finale composition software now says (upon trying to open files) "You don't have permission to open this file. Contact the file owner or administrator to obtain permission.."
    Worst case, I can re-build my Finale composiitons, but I'm still annoyed with the Lenovo log-in screen constantly asking me to enter a password that I don't know!
    I am very dissapointed with purchased LENOVO WARRANTY SUPPORT - the people I've talked to have no idea about what I'm trying to explain to them.

  • 6483: Client Security Solution message

    Hello,
    I have a client whose 6483 machine is telling him to enter his Windows password:
    "Verify Identity
    Reason for authentication:  Your Windows password was changed recently. Please enter your Windows password to synchronize with Client Security Solution."
    This is a home machine, so for all intents and purposes, it doesn't have a Windows password. The only password he had was the admin password he made up when he first booted the OS, but that password doesn't work.
    I did some poking around through the forums here and it seems like if there is a TPM chip onboard, that turning that chip off or resetting it in BIOS might do the trick, but I'm not sure if this machine has a TPM chip.
    Has anyone encountered this on a ThinkStation, and if so, what was the solution?

    there is a dedicated TPM menu in the BIOS where you can clear the chip, disable it, enable it, etc.   i personally don't use CSS and can't tell you how to fix it but it's definitely worth playing with the TPM area in the BIOS to see if it helps.
    you should also search through the dedicated TVT forum to see if you can find a similar situation and resulting solution.
    good luck!
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • Rescue Recovery / No Windows password / Unrgistered user Client Security Solutions

    Hello....When boosted my Lenovo 3000 V100, I got the message saying that Windows could not start because the file "windows root \ system32 \ hal.dll" was either missing or damaged, and that a copy should be reinstaled. 
    I tried to access the Rescue and Recovery 3, which deployed but then asked me for my Windows password, which I don't have.  I pressed  Enter anyways and got as answer that I'm not registered with  Client Security Solutions, and that only registered users can start a session in  Rescue and Recovery  or retrieve passwords in case they had been forgotten.  What can I do?.  I bought my  laptop in Chile (spanish) and I am currently living in France.
    Thanks,
    Jose Luis 

    SALUT "MALHEREUX"
    J AI RESOLU MON SOUCI....A PEU PRES.
    IL A FALLU DEMANDER LES CDs DE RESTAURATION A LENOVO.  ILS SONT ARRIVES EN SIX SEMAINES, ET APRES AVOIR REFAIRE LA DEMANDE TROIS FOIS.
    ENFIN, J AI REBOOSTE L ORDI ET PERDU TOUTE LA INFORMATION ENREGISTRE DANS LE DISQUE....
    BON COURAGE  

  • X61 - Vista Business - Client Security Solution Error - There was a problem connecting to the TPM

    During startup my x61 has been displaying the following message, 'Client Security Solution' - "There was a problem connecting to the TPM (security device) ont his computer. It is possile that anti-virus or firewall software is blocking the connection. A missing or disabled device driver could also cause this problem. Please refer to the online documentation for more information".
    I have spent an extraordinary amount of time and effort to find identify the cause and a solution for this problem. It occurs whether or not virus software is enabled or disabled and numerous calls to Lenovo, Symantec, Kaspersky, and Microsoft have resulted in finger pointing and no answers. None of the vendors acknowledge the problem yet this same issue is a significant topic of concern as found in various blogs and 'help' sites. Lenovo thought it was hardware and changed the motherboard. Lenovo told me to call Microsoft since it was a Vista issue. Microsoft told me to call Lenovo since Vista Business was preinstalled on the machine. Lenovo told me to call Microsoft and so it goes. I removed Symantec's anti-virus and replaced it with Kaspersky.
    The strangest thing is that the module works intermitently and it seems that everytime a Lenovo update is performed (via Thinkvantage) the problem reoccurs for sometime.
    Does anyone out there have an understanding of the cause and a potential solution???

    I have the same problem on an X 60 platform, which only surfaced in the last two weeks subsequent to running all of the Lenovo updates.   Prior to this, I had reinstalled all programs, starting with the Recovery Disks for the Think Pad.  Everything, including start up, was exceptionally fast.  Once I ran the most recent BIOS updates, along with several others, this error message surfaced.  It is intermittent, however, and I have not noted an issue.
    In reviewing several other Message Boards, I have seen this issue raised several times.  Here is a link to a thread where the individual did achieve a solution through Lenovo, but their response is nonspecific as to what they did:   (http://forums.lenovo.com/lnv/board/message?board.id=T400_series_ThinkPads&message.id=7143&query.id=1...

  • T61p 6460 74M - Client Security Solution Problem

    I am having problems with the Client Security Solution running under Vista
    I am able to log in OK using the fingerprint reader or password however after the system boots the CSS widow appears asking for password, I enter the password but it does not recognise this and requeste retry or cancel. If I retry the password entry it advises that "Authentication Failed". I then cancel and the CSS window offers to configure the CSS - hit "Yes", requests verification of identity with password - I enter password - response is "Authentication Failed" and back to square 1.
    Can the CSS be reinstalled and then reinitialised. This problem may have arisen after I upgraded my Norton Internet Security 2007 or 2008 to NIS 2009, or when I reset Internet Explorer 7. I note at this time the Password Manager dissappeared from IE7.
    Does anybody have some advice please since this useful function - Password Manager - has now been either disabled or removed.
    Regards Chris R.

    I had problem with CSS also after installing (maybe) Norton Update. No answer from CSS at all any where, and I could not start it it either.
    I reinstalled it with the application:
    C:\Program Files\Lenovo\Client Security Solution\css_admin_vista_launcher.exe
    An then it works again - installation will delete all store passwords!

  • Client Security Solutions wants to synchronis​e passwords with Windows

    For some reason Client Security Solutions wants to synchronise passwords with Windows. I managed to get rid of this request years ago but it has returned. My problem is that I can't remember what my windows password is. How can I stop ThinkVantage from making this request each time I boot up my computer?

    C'mon, Lenovo!  I'm the original poster on this...your original response was that Password Manager doesn't work on Google Chrome because they don't support extensions...but they have in their latest release since at least 5 months ago!!
    Disappointing.
    T410 i620 4GB, Windows 7 x64

  • Client Security Solution problem (Vista)

    I have installed the lenovo fingerprint software and Client Security Solution 8.1 on my N200 0769. Unfortunately, CSS doesn't recognize my fingerprint reader. I can logon with the fingerprint software the way it is meant, so it can't be a hardware problem.
    Under Windows XP both programs worked perfectly together so I could enter login data in Firefox by simply scanning my finger. I don't understand why the software doesn't work with Vista...
    3000 N200 BDG, Vista Business 32bit

    I have the same problem on an X 60 platform, which only surfaced in the last two weeks subsequent to running all of the Lenovo updates.   Prior to this, I had reinstalled all programs, starting with the Recovery Disks for the Think Pad.  Everything, including start up, was exceptionally fast.  Once I ran the most recent BIOS updates, along with several others, this error message surfaced.  It is intermittent, however, and I have not noted an issue.
    In reviewing several other Message Boards, I have seen this issue raised several times.  Here is a link to a thread where the individual did achieve a solution through Lenovo, but their response is nonspecific as to what they did:   (http://forums.lenovo.com/lnv/board/message?board.id=T400_series_ThinkPads&message.id=7143&query.id=1...

  • Client Security Solution with TPM

    Hi,
    after upgrading the z61p from XP to Vista I am not able to get the client security solution (css) up and running.
    I always get amessage form css on the screen that an error occurred during connecting the TPM on this computer (sorry, I'm using the german language versions, therefore my translation might not be exactly the same what you get from the english version).
    The message-box shows the additional hint, that the problem might be caused by the firewall or an antivirussoftware (both are actually disabled).
    What I tried out already:
    - delete and reactivate the TPM before installing css
    - delete TPM (without reactivation) and install css
    - connected to my domain, and not connected
    - firewall disabled and enabled
    - antivirus running and stopped
    Has anybody an idea what else I can do to get the css with the password-manager up to work??
    Regards - Rudolf

    Nop.
    I'm a little bit frustrated by Lenovo, because of the poor support.
    The notebook is excellent, but the support .....
    In other newgroups if the members are not able to answer or solve the problem the supplier/moderator does.
    Here it seems to be different.

  • The power meter, and Client Security Solution, Rescue & Recovery problems?

    Hey guys, 
    I just love my Lenovo X61s...
    Everytime I boot it up(BTW, I run XP) I login and CSS asks me to verify my authentication, and always fails. I HAVE read posts by other people reporting the same problem, and I've read that clearing the TPM thing in the BIOS will solve it, but in my case it just doesn't!
    Also, a power meter just beside the System Notification Tray, doesn't always show up, and hence sometimes when I shut down, a 'PwrBnkGndWindow' end program window pops up! Can anyone please please help me in solving my problems!? 

    Based on your description I don't think Rescue & Recovery or Client Security Solution have any value for you.

  • Client Security Solution 8.21 for Windows 7 (64-bit only)

    i used to work on client secuirty on my old OS windows Vista, now after i upgrade to windows 7, the appliaction wont install on my OS.
    i tried to install the Vista Ver. and its not working
    please advice

    This is from a post on the Thinkpads.com forum during the beta:
    I forget the name of the very clever person who figured this out, but it wasn't me.
    How to install Client Security Solution on Windows 7:
    1. Download the software from Lenovo at http://www-307.ibm.com/pc/support/site. ... 69986.html [didn't get the complete link when I copied and pasted, but CSS for Vista x64 isn't difficult to find on the Lenovo web site]
    2. Open the file tvtcss82v64_0023ww.exe to begin installation.
    3. When you get an error message about the wrong OS, do not click "OK." Instead, locate the file "Client Security - Password Manager.msi" (Look in "Users\Username\AppData\Local\Temp\{xxxxxxxxxxxxx}" - Note that the last folder is a randomly generated temp folder. The easiest way to find the right one is to look at the date it was created). Once you find the msi file, copy it to your desktop.
    4. Open the file from your desktop with Windows Install Editor using Wise Package Studio. Download a free copy at https://www4.symantec.com/Vrt/offer?_re ... _id=55188& [this isn't the correct link, but you can easily find it on the Symantec web site.]
    5. Go to the Setup Editor and find "Launch Conditions" on the Product Tab.
    6. Remove the Condition "VersionNT64=600 OR Installed" and save the package.
    7. Click "OK" on the error message that still remains on your desktop from attempting the installation.
    8. Run the .msi file from your desktop and complete the installation

Maybe you are looking for

  • Font setting for the line headings of a numbered list

    I have been setting up Word files which are in outline form with A., 1., a., etc. as the numbering. In Word, the line heading (A., 1., etc.) take on the font and size that I use for the line text. In Pages, it seems to be stuck on a default size that

  • ITunes refuses to import Amazon MP3 album, claims permissions won't allow me. What?

    I download through Amazon MP3. I downloaded Muse's album and imported that into iTunes just fine, but for whatever reason, when I downloaded the Black Keys album El Camino it refuses to play ball. I get "Attempting to copy to the disk "Macintosh HD"

  • Airport Express power cord

    I was wondering if there is a way to only buy power plug cord that can allow the Airport Express to not be on the wall?  I'd like to connect the cords needed for airtunes, but cannot do it without putting an extension cord on the AE (or using the pow

  • Command+tab suddenly does not scroll through applications

    In fact, command+tab does nothing at all - it doesn't even show the desktop icon. Both of the command buttons and the tab button do work, just not for this purpose. I use command+tab constantly while I work, so this is a pretty big annoyance. Using a

  • Spacing between characters too large when using line justification !!!!

    Dear friends, Since the first time when I have used Pages I noticed a somewhat annoying feature: Sometimes when I use line justification (left and right) the spacing between the characters increase substantially. Sometimes the spacing is ridiculously