A problem with Cubase

I'm facing a very annoying problem with Cubase and I'll appreciate any assistance.
I want to play a sound from a VST called minimoog (of Arturia). I controls the VST from my Roland XP-80 keyboard.
I assign the VST to a MIDI channel in the Cubase, and set the channel number to a specific channel (let's say, 12). The reason for doing that is that in the same time I play the VST, XP-80 phrases are played from the XP-80 engine. In order to prevent the VST from playing while those phrases are played, I assign the VST a special channel. I.e., the MIDI channel in the Cubase looks like this:
In: All MIDI Inputs
Out: minimoog V
Chn: 12
However, it doesn't work as expected. When the XP-80 phrases are played, the VST plays the same notes (which of course, should not happen). Using a Midi Monitor SW I confirmed that the PC on which the Cubase running, receives MIDI messages thatdo not belong to channel #12, yet, they are played by the VST.
The problem does not occur when I run the Minimoog VST in stand alone mode (not from the Cubase)!
That's a very serious problem for me, because in addition to the VST I work also with virtual sampler, and if I'll not be able to run the VST from the Cubase, I'll have to close the sample whenever I want to run the VST, and vice versa.
Can anyone tell why it happens and how I can solve the problem?
Thanks in advance!

>Can anyone tell why it happens and how I can solve the problem?
No, I'm sorry, but I can't. The main reason for this is that this is and Audition forum, not a Cubase one, and the vast majority of us don't speak Cubase. Your best solution would almost certainly be to try the same question on a dedicated Cubase forum - of which I suspect there are plenty.

Similar Messages

  • Problems with Cubase LE 6 and eLicenser Control Center

    This isn't strictly an Apple problem, but I thought someone might be able to help me!
    I use Cubase LE 6 for my singing, and have never had problems before with exporting my audio tracks to MP3s. Today, however, I went to export my recordings and a box popped up saying I had to go over to my eLicenser Control Center and validate my usage licenses as they had expired. So I did this, apparently successfully (as seen in the photo attached), but then nothing seemed to change. The licenses remained in red, still 'expired' (since the 1st April), and I still can't export my tracks.
    Someone please help! I've done what was asked but now am completely stumped. Music software is not my forte! But it is extremely frustrating!
    Thank you!
    Georgia

    I just had this problem after installing Cubase on my retina mbp. The problem is the retinas higher native resolution that conflicts Cubase's inability to run the program at such a high resolution. To solve
    If open, close Cubase
    Go to Applications through Finder
    Right click Cubase and select "Get Info"
    Select the box "Open in Low Resolution"
    Once you've done that, re-open Cubase. Although the interface is now a bit pixelated, Cubase should run fine now. If not, don't know what else to say, because it worked for me! Good luck.

  • Having problem with cubase le 6

    i have cubase le 6 on my mac and the software comes up and look ok but i can not click on anything but i can use the up and down arrows and all so the enter key but i can not use the mouse plaes help

    I just had this problem after installing Cubase on my retina mbp. The problem is the retinas higher native resolution that conflicts Cubase's inability to run the program at such a high resolution. To solve
    If open, close Cubase
    Go to Applications through Finder
    Right click Cubase and select "Get Info"
    Select the box "Open in Low Resolution"
    Once you've done that, re-open Cubase. Although the interface is now a bit pixelated, Cubase should run fine now. If not, don't know what else to say, because it worked for me! Good luck.

  • Can't get Audigy 4 to record audio with Cubase SX

    I'm trying to record at home with a mic, Audigy 4 (non-pro) and Cubase 3 SX. Mic is pluged without preamp or mixer directly in the mic (not LineIn).
    I have choosen the Creative ASIO Driver in Cubase.
    My 2 Problems are:
    1. I always here the mic directly in the speakers (direct passthough / monitoring). When I mute the mic in the xp mixer (playback setting) then I don't get any audio recorded. But I want to have the "wet" signal from Cubase in my speakers/headphones (e.g. with reverb, chorus, eq etc.). Usinge the cubase "direct Monitoring" asio checkbox or the monitoring button for the track doesn't change anything.
    2. I always get the all other playing tracks on the recording tracks, seems like I always record a kind of what-you-here channel.
    Is there anyone using a Audigy 4 with Cubase 3 and direct mic-input without mixer/preamp successfully? And if yes, would you please post or send me your configuration
    a. from the xp controlpannel (playing and recording settings),
    b. from the creative suround mixer,
    c. from cubase ASIO setup and
    d. the choosen in and out connections in cubase (where you connect the in and out ASIO channels...)
    I'm getting mad at this ...
    Regards
    Pest

    Sorry that still doesn't work.
    I don't have a Mic L/R VST-Input (only 14 items, no #15 and #16 (as on your other post: "ASIO inputs 15 and 16 come from the Sound Blaster Audigy 2 eX Drive Line In 1/Mic In stereo input;"), see left panel on the pic, german names ...). There IS a difference between Audigy 2 ZX and Audigy 4? None of the 14 ADIO Inputs seems to work (no signal)
    And about the small speaker icon (Monitor) in Cubase: doesn't work! If I mute the Mic in the XP "playing" mixer I don't get any mic input at all. But shouldn't all mixer settings be ignored by the ASIO driver? I'm still confused about that - and still got no solution.
    Any more ideas? Someone ever tried a similar configuration or could verify / test this for me?

  • Problem with Audio MIDI Setup using multiple accounts

    I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

    Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
    What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
    So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
    Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
    G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap.   Mac OS X (10.4.8)   mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

  • Problems with the sound in Windows

    Hey everybody, hoping someone can help.
    I'm working with Cubase in Windows with my mac and i have problems with the sound, but not all the time.
    I have an M-Audio card connected and while i'm playing something in Cubase, the sound makes a digital distortion just for 10 seconds, and then again sounds perfect and then again comes back the digital crash, somekind of loop. So i was thinking that maybe was a problem with the drivers of my M-Audio card, but then i was playing a song in Winnamp with the built-in speakers and happens exactly the same, so i think it's a problem with the Mac drivers for Windows, i use the same audio card in MacOsX and i don't have problems
    I have tried various display settings. I have no idea if this is just me or a common problem.
    Thanks in advance...
    MacBook Pro 2.16 GHz Intel Core 2 Duo   Mac OS X (10.4.8)  

    This is not a BOOT CAMP Problem. It is a WINDOWS XP Problem. Either he didn't install the drivers for the sound card. (Which is Realtek High Definition Audio) or the Windows XP audio driver (WNMM) is corrupt.
    Go to Device manager and under Sound, Video and Game controllers you should see a little yellow question mark under the WNMM driver. If this is the case he needs to uninstall the driver and reboot. It will then reinstall itself and should work properly after that.
    MAC PRO   Mac OS X (10.4.9)  

  • CC automation problems with Battery 3

    I have the knowledge about how CCs work as I've worked with hardware samples and Cubase for years.
    I just got myself a Macbook, Logic Exp 7.2 and Battery 3 (it's UB).
    In Battery 3, I can freely assign any CC to modulate some desired sampler parameter(s).
    E.g., I can freely pick any CC and assign it to, say, a filter cutoff / sample start / etc.
    So there's nothing hard about that.
    However, when I draw - on the main window, on an automation track - a curve (or, a line, rather) for the assigned CC on the Battery 3 channel and after that play my Logic, nothing happens.
    So I wonder what's wrong?
    As soon as I switch the modulation source to velocity for example, I can hear the modulation happening so I know that the mod. matrix definitely does work.
    The CC thingie, however, seems not to be working.
    I wonder why that is? It also looks odd that the range of the CC curve I can draw is 0.00 - 1.00; shouldnt it usually be 0 - 127?
    Ive never had this problem with any other plugin before; however, with any other plugs etc (e.g., EXSP24, some fx plugins etc) ive used ive never had to draw any CCs curves as Logic lets me pick and draw all desired automation curves so easily without bothering me with any CCs things, and this ive already done a lot with my Logic and everything works like a charm - it's only the CCs here that aint doing nothing.
    Any help here is much appreciated.
    And pls dont tell me this is some Logic Exp limitation; that I should upgrade to Pro to get the CCs working? :-/

    i'll answer my own Q.
    the answer is in the "automation page", not "modulation page" - the cc things u do in the latter seem to have absolutely no effect.
    thanks to mister Ew for clarifying this to me on DOA board.

  • Problem with 'Save as' dialog

    Hi,
    i have a strange problem with my 'Save as' dialog in all my appications, whenever i 'save as' it goes to my documents folder all the time, it used to go to the last folder i'd saved to. anybody have any clues as to what's going on? also, it doesn't seem to have the little traingles beside the folders anymore, so you can't click on them to quickly see what's in the folders.
    this is on a powerbook Ti 1Ghz running 10.4.7
    thanks

    thanks Peter for trying to help
    ok, i've narrowed down the problem, it seems that when i try and save a file onto one partition of one of my ext drives it won't save to my last save dir but if i save to another partition/drive it works ok, also if i rename the 'dodgy' partition it also seems to work ok, so somehow the name of the drive has become corrupted.
    anybody ever heard of this? or how i could fix this as it's a quite annoying because alot of my audio files are referenced on this partition, so itunes or Cubase (audio sequencer) can't find my files now.

  • Problems with Audigy 2 ZS ASIO driv

    I have some problems with ASIO drivers in my Soundblaster Audigy 2 ZS Platinum Pro. I use the program Cubase SE. When I select the SB Audigy 2 ZS ASIO 24/96-driver, it works for some time but then the sound starts cracking and popping and eventually doesn?t work at all until you reselect the driver. And with the SB Audigy 2 ZS ASIO-driver I can only record in mono, even though I checked the inputs. I think the Creative ASIO-driver had the same problem. Actually the ASIO Multimedia Driver has functioned the best. What could be the problem?

    Indeed, if you think it's something that might be useful to others aswell, then it would be nice to have it up here
    Cat

  • Problems with X-FI on central spea

    Hi. I'm italian and it's the first time I write on this forum. I have?problems with X-Fi Extreme Gamer Fatalty on Windows XP SP2. My central speaker doesn't work, only scratches. I have removed?X-Fi and reinstalled, but nothing is changed. I read on this forum about many problems with this card. With coaxial?on THX mode central speaker sounds but not very good as the other speakers, music and games have bad sound. The driver is updated. CMSS is on. I've changed the speaker and made all the proves, without results. Please, can you help me. Thank you all.

    So, have you tried to adjust it already, through ASIO panel?
    Is the ASIO driver you're using there the Creative one, or one of those bundled w/ Cubase?
    If you try w/ Asio4All, is the situation still the same?
    - http://www.asio4all.com (not sure if Asio4All is working in Vista at all)
    jutapa

  • Problems with various professional soundcards and Satellite A100

    Hi All,
    I bought a Satellite A100 less than a year ago and have had problems with 2 different professional soundcards when using Cubase.
    - M-Audio firewire solo plugged into Texas Instruments PCMCIA card
    - Echo Indigo io (PCMCIA card)
    I'm running Windows XP and Cubase SE/SX3. When running Cubase, there are cracks, sound stops for a few milliseconds.
    I've never had any problems with my old Toshiba Satellite Pro A40 notebook. This is very disappointing and frustrating. I only use my new Toshiba for the Internet!!
    Could someone help?
    Cheers,
    Fred

    This info helped me to overcome the dreaded glitch last year.
    But I have lost wireless networking on my A100 which is very annoying :-S
    See below.
    But not to my knowledge has there been proper acknowledgement of this problem by Toshiba (please prove me wrong on this Toshiba right now!!!)
    see full locked thread here...
    http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=93292#93292
    Re: Audio Glitch Problem when playing/recording on Satellite A100
    Posted: 13-Aug-2007 18:13 in response to: music27
    Hi A,
    Sorry for not responding sooner.
    The way I changed the driver was -
    Open Device Manager
    Click the '+' at 'Computer'
    Right click on the 'ACPI Multiprocessor PC' entry and select 'Update Driver...'
    When the Device Driver Wizard comes up, select 'No, Not This Time' when it asks if 'Windows can connect to Windows update to search for software', then click Next
    On the next screen, select 'Install from a list or specific location (Advanced)' and click Next
    On the next screen, select 'Don't seach. I will choose the driver to install' and click Next
    Then you'll get a list of drivers, select MPS Multiprocessor PC (assuming your laptop is Dual Core) then Next
    After that, follow any other instructions - I can only give you a step by step guide this far otherwise I'll end up re-installing the driver on my working laptop (I was just working through it and noting down the steps). I'd back up any data you have beforehand aswell - I didn't lose anything when I did it but it's better to be safe.
    When I did this procedure, I had to reinstall a lot, if not all, of my drivers - most were picked up by Windows but the odd one or two needed the drivers from the Toshiba website, I can't remember exactly which ones but it wasn't too painful. Everything works fine now, including the Wireless connection.
    Hopefully this will work OK for your laptop - it's not the exact same model I have so you may get different results but all the best anyway!
    Cheers.

  • Problem with Transaction-Duration Dialog

    Hello All,
    I wonder if somebody could shed a light on the problem that we're having
    with transaction-duration dialog service object. The problem is this.
    When we call the service object and its SQL statement fails (for
    example, because of constraint violation) Forte raises AbortException.
    It also clears the error stack, so we have no way to know what caused
    it, original error ("ORA -... Constraint Violation") disappears. All we
    get is this:
    USER ERROR: Access to a load balanced router member (which is a service
    object) failed for the reasons below.
    Class: qqsp_AbortTransaction with ReasonCode: SP_ER_USERABORT
    Error #: [601, 162]
    Detected at: qqdo_LbRouter::Route at 2
    Last TOOL statement: method tester.test, line 3
    Error Time: Thu Jul 2 15:56:40
    Distributed method called: SO_UmbrellaProxy.testAbortExc (object
    name
    site/sosa_sampleservice_cl0/th_testabort_cl0-bmso0x15d:0x1) from
    partition
    "TH_TestAbort_cl0_Client", (partitionId =
    DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x2, taskId =
    [DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d.4]) in application
    "Forte_cl0", pid 74 on node AANANIEV in environment archenv
    Originator: SP_AO_XACTMGR
    Exception occurred (locally) on partition "Forte_cl0_Client",
    (partitionId
    = DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x1, taskId =
    [DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x1.16]) in
    application
    "Forte_cl0", pid 74 on node AANANIEV in environment archenv.
    USER ERROR: Your transaction was aborted
    Class: qqsp_AbortTransaction with ReasonCode: SP_ER_USERABORT
    Error #: [402, 45]
    Detected at: XactMgr.TXAbort at 1
    Error Time: Thu Jul 2 15:56:40
    Originator: SP_AO_XACTMGR
    Exception occurred (remotely) on partition
    "TH_TestAbort_cl0_Part1-router", (partitionId =
    DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15b:0x9, taskId =
    [DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x2.17]) in
    application
    "TH_TestAbort_cl0", pid 18196 on node hp9000_1 in environment
    archenv.
    Has anyone experienced this problem with "transaction-duration" service
    object? Is there any way to find out the cause of "AbortException"? It
    seems impossible to catch the AbortException on the server partition,
    looks like Forte exits right away.
    Everything works fine with "message-duration" dialog, unfortunately it
    is not an option for us because of the way our batch programs were
    designed.
    Any help is greatly appreciated.
    Alexander Ananiev
    Claremont Technology Group
    916-558-4127
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    thanks Peter for trying to help
    ok, i've narrowed down the problem, it seems that when i try and save a file onto one partition of one of my ext drives it won't save to my last save dir but if i save to another partition/drive it works ok, also if i rename the 'dodgy' partition it also seems to work ok, so somehow the name of the drive has become corrupted.
    anybody ever heard of this? or how i could fix this as it's a quite annoying because alot of my audio files are referenced on this partition, so itunes or Cubase (audio sequencer) can't find my files now.

  • Leopard 10.5 problems with some music apps

    Leopard was just been released in Australia. I am one of the lucky ones to have a copy which I have just installed on my G5 powermac. However, now I find that under leopard, my G5 cannot start Garageband, Logic Pro 7 or Logic Pro 8. They all either crash or hang on start up. Soundtrack Pro is OK, as is iTunes, Final Cut Pro, and stand alone versions of software instruments, like Kontakt etc.
    I have tried to repair permissions, but disk utility also does not seem to be responding as per normal. It appears to start the process but goes on forever without issuing a report on its progress/results(?)
    I note on the Logic Pro 8 forum, that some people have experienced similar start up crash or hang problem problem with that software (under Tiger) but this behaviour did not start until I upgraded my system to Leopard.
    Does anyone have any ideas on what to try to fix the problem?

    Others are now reporting similar problems on the Logic Pro 8 forum. One "fix" appears to be to remove the rewire folder from Application Support/Propellerhead Software (and possibly, other rewire applications you may have such as melodyne). I have found that this now enables me to fire up garageband, logic pro 8, logic pro 7, and cubase 4, although I am getting some strange error messages now with some of these applications - they don't seem to be "happy".
    Seems like the issue has something to do with rewire under OSX10.5.

  • A problem with threads

    I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
    Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
    My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
    Thank you in advance,
    Lefty

    This was one solution from the socket programming forum, have you tried this??
    public Thread MyThread extends Thread{
         boolean active = true;          
         public void run(){
              ss.setSoTimeout(90);               
              while (active){                   
                   try{                       
                        serverSocket = ss.accept();
                   catch (SocketTimeoutException ste){
                   // do nothing                   
         // interrupt thread           
         public void deactivate(){               
              active = false;
              // you gotta sleep for a time longer than the               
              // accept() timeout to make sure that timeout is finished.               
              try{
                   sleep(91);               
              }catch (InterruptedException ie){            
              interrupt();
    }

  • Problem with Threads and a static variable

    I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
    Code functionality:
    A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
    The problem as far I understand is:
    Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
    Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
    Thanks,
    B.D.
    Code:
    private static volatile boolean bChanged = false;
    private static Thread objMainProcess;
       protected static void Init(){
            objMainProcess = new Thread() {
                public void run() {
                    while( objMainProcess == Thread.currentThread() ) {
                       GetState();
            objMainProcess.setDaemon( true );
            objMainProcess.start();
        public static void initStatusTimer(){
            if(objTimer == null)
                 objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
                    public void actionPerformed( java.awt.event.ActionEvent evt){
                              SetState();
        private static void SetState(){
            if( objMainProcess == null ) return;
            synchronized( objMainProcess ) {
                bChanged = true;
                try{
                    objMainProcess.notify();
                }catch( IllegalMonitorStateException e ) {}
        private static boolean GetState() {
            if( objMainProcess == null ) return false;
            synchronized( objMainProcess ) {
                if( bChanged) {
                    SendMessage();
                    bChanged = false;
                    return true;
                try {
                    objMainProcess.wait();
                }catch( InterruptedException e ) {}
                return false;
        }

    Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
    Again as you said, There is a reason I can't call sendMessage() inside setState().
    The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
    Thanks,
    B.D.

Maybe you are looking for

  • Macbook Pro 13" (Late 2013) does not connect to Wifi

    Hi, I just bought a new macbook pro 3 days back. It was working fine till it suddenly dropped connection to the home WiFi. Since then it shows a list of wifi options including the one that i was connected to but does not connect to it. The error mess

  • How do i get the web,images,videos bar back?

    how do i add the browse web,images,videos bar back?

  • Creating Vendor Credit Memo Using BAPI  BAPI_ACC_DOCUMENT_POST

    Hi, I want to create a vendor credit memo using the bapi BAPI_ACC_DOCUMENT_POST but with posting keys as 21 and 50.Is it possible to do so.I tested the bapi passing the data to the accountgl table.Do i have to pass data to another table ?

  • MAPPING CANNOT READ PAYLOAD

    HI AND THANK`S IN ADVANCED!!! We are trying to communicate SAP And XI in order to obtain a xml file. The conections are the following: sap-zfunction-xi-xml For that, we are using RFC ADAPTER for the comunication between SAP and XI, and the FILE ADAPT

  • HT1451 How to create  a 'playlist' ?

    After 'updating' my itunes I am having trouble with syncing music and books to my pod and creating playlists.  I have read the itunes tutorial re creating a playlist but fall at the first hurdle because the playlist heading doesn't come up on my scre