A problem with Notes...

I'm sorry if I posted this in the wrong place, but wasn't sure where to go.
I'm having problems with notes on my Mac running 10.8.4.
I've done searches, but cannot find my problem.
I have set up an iCloud account. I can see my notes in iCloud, but if I try to use the Notes.app, I get the above response. The prefs seem to be set up, I must be doing something wrong.
Thank you for any help,
mhh

Apparently I don't know how to paste.
The message reads:
"This Mac can't connect to iCloud because of a problem with [email protected]"

Similar Messages

I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.

I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.
Programs (Safari, mail, messages) keep crashing, mail will not delete properly (some will keep popping into my inbox again for no reason!!!), slow, settings lock up etc. etc.
This only seemed to become an issue once I updated to ios 5.1 and funnily also affected my Ipad even though i hadn't updated the software yet. I have since updated the software on my ipad thinking it might help too but that only made things worse!! So I am not sure if it's an ICloud issue, but when i try to disable ICloud my devices lock up as well.
The battery life is also shocking!!
I have hard reset both devices, restored both devices, reset the setting and tried a whole host of other suggestions (like closing background programs) on this forum buit nothing works and i am tearing my hair out.
I looked in the phone and ipad log and there do seem to be low memory reports though i don't know why these are occuring now when they never have before??
I don't know if I can restore the old operating system (If I can please let me know how). The phone or ipad are not jailbroken.

but you should have a backup in itunes.
Every time you sync your iOS device iTunes creates a backup. go check if its there, iTunes Preferences >Devices. and there you should see if you have a backup, and in case from which date the backup is.
And ofcourse you can get your icloud data back by just logging in with your Appleid under icloud in settings on the iphone.
But anyway, if the iPhone works when you restor it as new: try adding your backup, and see if the issue comes back. And experiment with your backup and try to work out what is causing the issue, my guess is that its some app! Good Luck!

TS4040 I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs re

I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs repairing. So I click on Repair, and once again I'm prompted for a password, which I enter, then the same error box opens, and so it goes. Can anyone help me with this problem? I'd greatly appreciate it.
Thor

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

HT1222 Having problem with Notes at time will not record dictation on iPhone?

Having problem with Notes at time will not record dictation on iPhone?

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help have your phone examined by an apple technician. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Problem with not enough resolutions Late 2013 iMac 27"

Hi guys.
Last friday arrive to my home my new top iMac --> i7 / 16Gb / 3Tb FusionDrive / GTX 780
I always use 1920x1080 resolution display in my older iMac Mid 2010 27" but in my new iMac say this:
I need 1920x180. Is it possible change the resolution with scrips or edit one file...?
Thanks

baltwoJul 21, 2014 10:07 PM
Re: Re: Problem with not enough resolutions Late 2013 iMac 27"in response to GoldFran
Might be primitive, but free, and does the job.
the truth is you're right. Sometimes we search any solutions but this is some complicated when the best fix normally, It´s easy solution... "Okam's razor"

Problem with not getting Internet Connect on AirPort Express

Problem with not getting Internet Connect on AirPort Express (version7.6.4). Error says cannot get valid IP address. Have reset Siemens SpeedStream 4100 several time, even with tech support from the big "A" DSL provider. Plug MacBook Pro directly into modem and works fine. Unplugged AirPort, even reset it, still no luck. A bad Express?? or am not looking in the right place to make connection. Was working fine up until Sunday.

Connect the AirPort Express (AX) to the cable modem via Ethernet cable.
In configuring the AX using AirPort Utility:
Under Internet, set the connection to be Ethernet using DHCP.
Under Connection Sharing, set it to distribute a range of IP addresses.
Under AirPort>Wireless, set the Wireless Mode to Create a wireless network, and fill in the remaining settings in the same window. Until you get it working, you might want to set Wireless Security to None.

Problems with notes and mark ups in pdf

I'm having problems with the Adobe reader for iPad.
Whenever I modify a pdf file, adding notes or any other mark up, I'm not able to see any of the markups in the file when I open the same file with another application or I send it via e-mail.
Only the digital signature is still visible.
Thanks

You are correct. When i open it with Adobe i get my mark ups etc. When i use Apple`s pdf view i do not.
Problem solved.
Date: Mon, 17 Dec 2012 10:46:22 -0700
From: [email protected]
To: [email protected]
Subject: Problems with notes and mark ups in pdf
Re: Problems with notes and mark ups in pdf created by Pat Wibbeler in Adobe Reader for iOS - View the full discussion
Can you share what applications you are using to view the notes after emailing? You have to view the document in a Reader that supports annotations. Apple ships a built in pdf viewer (like the one used in iBooks) that many iOS developers use (e.g. Dropbox, email). This built in PDF viewer does not support rendering annotations. However, many other applications (like the Adobe Reader for iOS and the Adobe desktop products) do support Annotation rendering. Similarly, one of our competitor's PDF viewers (PDFExpert) supports this functionality as well. Annotations are part of the PDF standard and the specification is widely available and we would love to see more renderers support it!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4927598#4927598
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4927598#4927598
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4927598#4927598. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader for iOS by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problems with Notes on my iphone

I love the Notes "app" that comes default with the iphone. However, I've been having problems with it, now that I use it a lot and am able to observe the smaller details.
I see that there are two forms of Notes, those linked to my email and those "on my iphone". Right now I have the setting left as "on my gmail", so the notes get backed up there every time. This is good, since I have the annoying problem that I can save a note on the iphone, and the next day when I try to access it, it is no longer there (although I can find it in my gmail account). Worse yet is that I can already have a note saved, go into it later to add something, and before my very eyes the system will update (or something) and the information I've just written in will disappear.
Please help!

Hey G.Russo,
Thanks for the question and detailed information. I understand that you are experiencing issues with the multi-touch display on your iPhone 5s. The following resource outlines troubleshooting steps for this symptom:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Restart your device
Hold the On/Off button until "slider to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
Clean the screen with a soft, slightly damp, lint-free cloth.
Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see the Service FAQ for your product.
Thanks,
Matt M.

I'm having problems with Notes after upgrade to OS4. Anyone else?

After upgrading mu iphone 3GS to the new OS4, I'm having serious problems with my Notes. If I edit old notes and klick Done, it now takes longer then ever to save. And when the save is finished, my latest edits are gone! The note is back to the text before I opened it up for editing...
Has enyone experienced this after upgrading?
Also, why does it take such a long time so save the notes now? I can see in the "progress bar" the phone is connecting to the Internet after klicking Done. Why is that? It never did that before. Does the new OS4 save all notes on some sort of server instead of just saving on my phone? Can I shut this function off somehow?
Thanx for all answeres!

I am having the same issue but havent been able to find a solution yet.

Netbeans + MySQL + Tomcat (problem with: not a known entity type)

I try to create WebApplication with Stripes in netbeans, but I have problem with connect to DB.
I have this code:
EntityManagerFactory emf = Persistence.createEntityManagerFactory("jpaPU");
EntityManager em = emf.createEntityManager();
em.getTransaction().begin();
Person p = new Person();
p.setFirstName("name1");
p.setLastName("name2");
try
em.persist(p);
} catch(Exception e)
System.out.println(e.toString());
em.getTransaction().commit();
em.close();
emf.close();But in try{..} is em.persist(p); ant it prints into console this error: "java.lang.IllegalArgumentException: Object: db_entity.Person@13c7c35 is not a known entity type."
I do not know where is problem. Could you help me, please?
This is my persistence.xml:
<?xml version="1.0" encoding="UTF-8"?>
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="jpaPU" transaction-type="RESOURCE_LOCAL">
    <provider>oracle.toplink.essentials.PersistenceProvider</provider>
    <properties>
      <property name="toplink.jdbc.user" value="root"/>
      <property name="toplink.jdbc.password" value="adminadmin"/>
      <property name="toplink.jdbc.url" value="jdbc:mysql://localhost:3306/test"/>
      <property name="toplink.jdbc.driver" value="com.mysql.jdbc.Driver"/>
      <property name="toplink.ddl-generation" value="create-tables"/>
    </properties>
</persistence-unit>
</persistence>When I run my application I can see in console:
[TopLink Info]: 2008.11.15 09:01:13.265--ServerSession(4794542)--TopLink, version: Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (12/06/2007))
[TopLink Info]: 2008.11.15 09:01:13.578--ServerSession(4794542)--file:/D:/Workspace/NetBeansProjects/jpa/build/web/WEB-INF/classes/-jpaPU login successful..so, I hope persistence.xml is good
This is my class Person.java:
@Entity
public class Person implements Serializable {
    @Id
    @GeneratedValue
    private Long id;
    private String firstName;
    private String lastName;
    public void setId(Long id) { this.id = id; }
    public Long getId() { return id; }
    public String getFirstName() { return firstName; }
    public void setFirstName(String firstName) { this.firstName = firstName; }
    public String getLastName() { return lastName; }
    public void setLastName(String lastName) { this.lastName = lastName; }Please, help me.

I had the same "is not a known entity type" error when running under a development environment Eclipse/Tomcat using Toplink. But the almost same code and configuration worked when running under Eclipse as a stand-alone Java app.
Eventually I figured out (actually trial and error), that I had checked the toplink-essentials.jar libraries to be exported under: Eclipse Project/Java Build Path/Order and Export. I was messing around with libraries. Unchecking the export option there fixed the problem.
While its unlikely that this could have been your exact problem, I would check the library order and export configurations. Looking at other message boards about this problem, many seemed to have been caused or fixed by playing with their libraries.

Problem with Not equal to: anything connected to BASIS??

Dear all,
I have a problem when I use '<>' or '><' or 'NE' to write dependencies. The function modules CUKD_XREF_OBJ_CHARC_SVAL and CUKD_GET_XREF dont work correctly. Is there any problem with in the SAP . Do I need to apply some Patch? Anything connected to Basis. Please help.
Thanks&Regards,
Manjula.S
Edited by: Manjula on Dec 3, 2008 11:45 AM

Hi ,
Please see the code below. I have created a structure ZCHAR_TAB with 2 fields ATNAM and ATWRT.
I have a class TEST_CLASS and characteristics TEST1 with values SIMPLEX , DUPLEX and second characteristic TEST2 with values GREEN, BLUE,ORANGE, BROWN. Lets say Write 1 dependency for
Orange and include 'NE'. The object dependency number from CUKD_XREF_OBJ_CHARC_SVAL are not coming correclty.
FUNCTION ZCHARACTERISTIC_VALUES.
""Local Interface:
*" IMPORTING
*"     REFERENCE(ATNAM_IN) TYPE ATNAM
*"     REFERENCE(ATWRT_IN) TYPE ATWRT
*"     REFERENCE(ATNAM_OUT) TYPE ATNAM
*" TABLES
*"      ZCHAR_TAB STRUCTURE ZCHAR_TAB
DATA : GT_CABN   TYPE STANDARD TABLE OF CABN   WITH HEADER LINE,
         GT_CAWN   TYPE STANDARD TABLE OF CAWN   WITH HEADER LINE,
         GT_CUOB   TYPE STANDARD TABLE OF CUOB   WITH HEADER LINE,
         GT_CUKB   TYPE STANDARD TABLE OF CUKB   WITH HEADER LINE,
         GT_CUXREF TYPE STANDARD TABLE OF CUXREF WITH HEADER LINE,
         GV_ATINN LIKE CABN-ATINN,
         GV_ATWRT LIKE CAWN-ATWRT.
GV_ATWRT = ATWRT_IN.
Selecting data from the CABN table for the internal characteristic numbers
SELECT *
         FROM CABN
         INTO TABLE GT_CABN
         WHERE ATNAM IN (ATNAM_IN,ATNAM_OUT).
IF SY-SUBRC EQ 0.
Reading data from GT_CABN internal table to get the internal number of the
Output characteristic
    CLEAR GT_CABN.
    READ TABLE GT_CABN WITH KEY ATNAM = ATNAM_OUT.
    IF SY-SUBRC EQ 0.
      GV_ATINN = GT_CABN-ATINN.
    ENDIF.
Selecting Values of the Output characteristic from the CAWN table
    SELECT *
           FROM CAWN
           INTO TABLE GT_CAWN
           WHERE ATINN = GV_ATINN.
    IF SY-SUBRC EQ 0.
      IF NOT GT_CAWN[] IS INITIAL.
Selecting the Dependency assignment numbers from the CUOB table
        SELECT * FROM CUOB
                 INTO TABLE GT_CUOB
                 FOR ALL ENTRIES IN GT_CAWN
                 WHERE KNOBJ = GT_CAWN-KNOBJ
                 AND   LKENZ = ''.
      ENDIF.
    ENDIF.
ENDIF.
LOOP AT GT_CABN WHERE ATNAM = ATNAM_IN.
Retrieving all the Dependencies based on the Input Characteristic
into GT_CUKB internal table
CLEAR : GT_CAWN.
READ TABLE GT_CAWN WITH KEY ATINN = GT_CABN-ATINN.
    CALL FUNCTION 'CUKD_XREF_OBJ_CHARC_SVAL'
      EXPORTING
        FROM_DATE    = SY-DATUM
        OBJTYPE      = ' '
        OBJKEY       = ' '
        ATINN        = GT_CABN-ATINN
        TO_DATE      = SY-DATUM
      TABLES
        DEPENDENCIES = GT_CUKB
      EXCEPTIONS
        NO_DEP_FOUND = 1
        OTHERS       = 2.
ENDLOOP.
LOOP AT GT_CUKB.
    CLEAR GT_CUOB.
    READ TABLE GT_CUOB WITH KEY KNNUM = GT_CUKB-KNNUM.
    IF SY-SUBRC EQ 0.
      CLEAR GT_CUXREF. REFRESH GT_CUXREF.
      CALL FUNCTION 'CUKD_GET_XREF'
        EXPORTING
          KNNUM        = GT_CUOB-KNNUM
          DATE         = SY-DATUM
        TABLES
          XREF_TAB     = GT_CUXREF
        EXCEPTIONS
          NO_REC_FOUND = 1
          OTHERS       = 2.
      LOOP AT GT_CUXREF WHERE ATWRT = ATWRT_IN.
        CLEAR : GT_CAWN.
        READ TABLE GT_CAWN WITH KEY KNOBJ = GT_CUOB-KNOBJ.
        IF SY-SUBRC EQ 0.
          CLEAR : GT_CABN.
          READ TABLE GT_CABN WITH KEY ATINN = GT_CAWN-ATINN.
          ZCHAR_TAB-ATNAM = GT_CABN-ATNAM.
          ZCHAR_TAB-ATWRT = GT_CAWN-ATWRT.
          APPEND ZCHAR_TAB. CLEAR ZCHAR_TAB.
        ENDIF.
      ENDLOOP.
    ENDIF.
ENDLOOP.
ENDFUNCTION.

Problem with not executed include

Hi all,
I've a problem with my include in production system. Whole story looks like this. We have product from 3rd company so this is not z-namespace. There are some places in which we can add our own code - function module with not existing z-include. This FM is called with CALL FUNCTION statement, not CALL CUSTOMER-FUNCTION, so there are no CMOD entries to modify. I've created this include and implemented my functionality. Unfortunatelly my code in production is sometimes executed and sometimes not. What I've observed is that when include is not executed debugger steps over it (it goes in to FM but ignores include) and what is more funny I'm not able to set breakpoint in this include (I'm getting a message that ithis is not possible). 2 Minutes later everything works (I can set break point and include is executed) although I didn't do anything (no activation). I've transported once more all transports from development to production without any change. I didn't observe this behavior in development or test systems, but to be honest I didn't do so many tests to be sure that problem is only in production.
I suspect that there is something wrong with 3rd party product, but I'm not 100% sure. Did anyone has this kind of problem?
Best Regards
Marcin Cholewczuk

hi,
I've transported once more all transports from development to production without any change.
you could not activate debugger because . during transporting object from dev to prd all the object where not transported correctly . and some times the include which gets created has there namespace registered in repository objects , so when you re transported that request it corrected those entries .
regards
Deepak.

PC Suite 7.1.30.9 Sync Problems with Notes 8.0.2 C...

Folks,
I saw few other topics with similar report but none solution, therefore I'm posting my case.
I've used PC Suite for many years with Notes with no issues. I even refered it as the best feature of Nokia phones.
About few days ago I got the recommendation to upgrade the PC Suite to this new version. Since then I haven't been able to sync my calendar to either of my two phones; N95 and the just bought N97.
I run Windows XP Pro with SP2.
I have already UNinstalled the 30.9 manually or with PC Suite Cleaner and installed the versions .18 or .26 however nothing works anymore.
I tried to replicate Calendar alone or with any of the other options or with all of them but still no success.
It shows the replica and when it reaches 98% of the total of registers it chrashes and shootdown the Notes. The strange to me is it seems to be replicating the Contacts, even when it's not selected to.
Any recommendation or suggestions??
Best Regards

I believe that I finally found part of the problem.
After my last posts, I booted to another machine I usually were able to do a full sync of my Nokia E63 against Notes 7 and for my syrprise that machie failed also. That machine shows the version of Windows XP as: Windows ver 5.1 (Build 2600.xpsp_sp2_qfe.051011-1528ervice Pack2) and theLotus notes there is the same asin my other machine that was failing (7.0 HF277). Then it was clear to me that something in Symbian was causing that failure. I cleared all the existing entries in the E63 calendar and tried again, the same failure appeared, the sync stoppin premature and a message in the E63 display showing that it had a network error (I were connecting via Bluetooth). I then powered off and on again and still had the failure, then I decided to remove the battery for 1 minute and plug it again.... and voilá.... everything worked fine, my E63 was able to resynch again the calendar....
I don't know exactly what happened, but I believe that after some special condition, a piece of software under Symbian reaches an intermidiate state that is causing that failure and only after some interval that should act as a RESET, puts back that piece of software into the original state.
I hope this should help in your case. I don't had the oportunity to retest under Notes 8.02.
Best regards,
Flavio C Buccianti

Problem with NOT EXISTS

I have the following query:
select *
from aim01.t_pd_dntl_hdr a,
aim01.t_pd_dntl_dtl b
where a.sak_claim = b.sak_claim
and a.num_icn in ('2003303027063', '2004306009619')
and not exists (select 1
from aim01.t_claim_error i
where i.sak_claim = b.sak_claim
and i.num_dtl = b.num_dtl
and i.cde_stat_error = 'C'
and i.cde_disp_status = 'D'
and rownum = 1);
For 2003303027063 the inner select is true so I understand that it should not be in the output of the whole query.
Can anybody tell me why that would be happening?
Thanks,
Antonio

Just in case you run into the same problemWe could heed your advice if your problem was syntax related. But your issue really only applies to you. What you did to fix your problem was throw a 3rd table and 3rd inner join into the mix. That reduced the total rows returned by the top-level query, and thus reduced the number of chances for EXISTS to return TRUE.
I don't know why it makes a difference but it doesYou'll do yourself a favor by figuring it out. It will make you all the more proficient. Don't just accept the fact it works. Figure out why. We'd be glad to help, but without a knowledge of the actual data you're working with, there's not much we can do.

Problem with not saving the sent messages option

I tried to deactivate the option to save sent messages--- messages--> options---> settings-->other---> save.... Yes /no, try this please and reply .... Its a very big problem for me please nokia help----
and if that is not enough my battery is dead very fast because of the wifi connection that I can't turn off if keeps reconnecting alone!!!!! Even I turned every thing off
nokia you must help with an upcoming firmware update please

I've got the solution for one of your problems, but I want you to solve one that I have related to the sms. In order to stop your phone from connecting to the wifi set up your emails account first and it will stop. you have to go emails>>settings>>select the email account>>synchronisation>> retrieval days>> select none, because if you don't have data on your phone, it always try to retrieve the mails, and then it when the wifi comes out. Now my issue is that i can't see the ID when I got a sms even if I had it saved on my contact list, it is driving me crazy, I'm about to throw the phone away, please reply

A problem with Notes...

Similar Messages

Maybe you are looking for