A question about compilation albums, and how they are sorted...

Hi all,
Right I have loads of one off songs by many artist, or I just have the singles from albums, etc. To save having hundreds of single songs on their own I put them all together in a self-made compilation album with the decade as the album. So I have a 1960s, 1970s, 1980s, 1990s and 2000s album. I also have a Disney album, with all different movies as the artist, I do the same with Musicals. It's just helps with tidying up my library. When I sort by Album I would like the artists to be listed alphabetically, which doesn't always happen. I don't know what to do to make it happen. Especially if I have a full musical soundtrack that has the tracks listed, and I have a few of them. Instead of each artist being separate the tracks are all muddled up and listed numerically. For example the first track of The Book of Mormon is followed by the first track of RENT, then the second tracks come, all the numbered tracks are bundled. I hope that makes sense.
The other issue is when I transfer these songs to my iPhone. I want the album to appear as one album, but I want the artists to be separate. So I want one 'Songs from the Musicals' album but I want to look at artist and see every show listed separately. Again, I hope this makes.
I've seen how to add an 'Album Artist' which I tried, but that just gathers it up all into one artist. So to be clear, I want one album with multiple artists on my iPhone.
If you have any tips or help, it would be greatly appreciated as it's becoming increasingly frustrating trying out different combinations of options to see what might work.
Thank you.

Thanks, if it's a feature of PL/SQL, that will be nice.
But both are bind variables, one is on bind variables peeking and the other is not. it's better for me to keep in mind it has a switch to control the peeking when using bind variables in PL/SQL, as I thought there is no way to avoid peeking when using bind variables...

Similar Messages

  • What is the meaing of the sysmbolic constant value in the header file for UIR file and how they are used

    In labwindows after creating the uir then header file is create automatically. There it has define some symbolic constant. As examples of colview.h(from the examples of labwindows )
    #define  MAINPNL              1       /* callback function: MainPanelCB */
    #define  MAINPNL_RESULTS      2     /* control type: table, callback function: ResultTableCB */
    #define  MAINPNL_NEWTEST     3       /* control type: command, callback function: NewTestCB */
    My question is how these values 1, 2 and 3  were selected and how they are used in programs ?
    If anyone explains, it will be a great help.

    When creating a UIR file, CVI editor takes care of assigning constants to the panels / controls you create in it.
    The conceptual framework is the following (assuming to treat the file you have reported in your message):
    - Within a single UIR file all panels have a unique ID, which is the one you pass to LoadPanel when loading a panel into memory. LoadPanel (0, "myfile.uir", MAINPNL); is then translated to panelHandle = LoadPanel (0, "myfile.uir", 1); , that is: "load the first panel in the uir file". The panel in memory is then assigned a handle, which is guaranted unique by the OS and saved in panelHandle variable
    - Addressing a control in a panel is done e.g. using SetCtrlVal (panelHandle, MAINPNL_NEWTEST, xxx);  , which again is translated to SetCtrlVal (panelHandle, 1, 3);  that is: "Set control #3 in the panel identified by panelHandle to value xxx".
    You must not modify the include file associated to the UIR as it is fully maintained by the IDE and is rewritten each time you save the UIR file.
    That conceptual framework has some advantages and some caveats:
    - You can load the same panel more then once in your program: each instance is independent from the others as each panel handle is unique; in some occasions it may be helpful, e.g. if you need to handle several identical equipments connected to your PC and you can load the same control panel for each unit connected maintaining each of them independent
    - If the panel handle is wrong, the system does not warn you of this as it does not know of the symbolic names you are using; if you try that SetCtrlVal command with a wrong handle you are trying to manipulate a control on a panel different from the one you intend: supposing actual panel idientified by the handle has control #3 the maximum you can expect is that you receive an error in case you pass e.g. a string to a numeric, but if controls are of the same type you have no errors or warning at all! This is particularly important when addressing controls on pages of a tab control: each page is really a separate panel with its proper handle that you must retrieve with GetPanelhandleFromTabPage command before addressing the controls on it
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • I put my sim in someone's phone earlier for about 3 minutes, and now they are receiving my iMessages and can't remive my number from their settings, pls help

    I put my sim in someone's phone earlier for about 3 minutes, and now they are receiving my iMessages and can't remive my number from their settings, pls help

    They need to turn off iMessage, power the phone off/on, then activate iMessage again with their SIM.

  • Trouble setting an album from iphoto as screensaver. It says no photos exist in the album and yet they are clearly there.

    An album in iphoto has 134 photos in it and yet when asked to use for screensaver in system preferences it reads as no photos. Even if I selec all......

    There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Songs cut off. someting to do with id3 tags and how they are encoded?

    Something very disconcerting is happening; tracks are being cut off before they should. Slowly more and more songs are being 'eaten'.
    One correlation does seem to be that they are all encoded with iTunes v4.0.1 and have id3 tag: v2.2. Unfortunately I have no idea what, if anything, this means or what to do about it.
    The 'time' display of the song is changed to the point where it cuts off rather than it's true length. I have tried changing the stop time (song info, options tab) but it does not allow me to make it longer.
    Currently iTunes 9.0.2 (25) is being used. This problem spans over several updates.

    Thanks Mike,
    Usually I do get info on a whole album, but I found that doing this for individual songs allows you to view the sorting info, and it was this that was causing the problem - All the sorting info has to be exactly the same for each song within an album for it to sort properly on an ipod. It's weird that the sorting was fine within Itunes, but not on the ipod, but anyway this seemed to solve the problem.

  • Questions about MS15-011 and how to do this

    Been reading about this specific update to Group Policy operations and it has got me a little worried.
    I have several Active Directory servers running Win 2008 R2 and a lot of Windows 7 client machines.  Also have Exchange servers.  
    First pre-question:  is it absolutely mandatory?
    1) Does this update have to be applied ONLY to the Active Directory servers?  Or does EVERY machine on the domain need this?  Including Exchange or is that not necessary?
    2) If it is only applicable to the Active Directory servers, in what specific order should I do this?  Can I apply this update to one server at a time or should I do them all at once?
    3) If I have to do this to the entire domain in what specific order should this be done?
    4) I am unclear on what I should do after applying this update.  Do I need to do something in GPO to enable this?
    5) What happens if after applying this update it breaks everything?  Breaks GPO processing, NETLOGON or SYSVOL access, etc.  What then?  

    The first priority group is mobile domain clients (e.g. notebooks). But eventually, this update should be installed on all domain-joined systems, because MiTM is possible via wired connections as well. A quote from bulletin:
    The vulnerability could allow remote code execution if an attacker convinces a user with a domain-configured system to connect to an attacker-controlled network.
    this means that all domain-joined systems are affected.
    Vadims Podāns, aka PowerShell CryptoGuy
    My weblog: en-us.sysadmins.lv
    PowerShell PKI Module: pspki.codeplex.com
    PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
    Check out new: SSL Certificate Verifier
    Check out new:
    PowerShell File Checksum Integrity Verifier tool.

  • HT204074 I have an iPod nano and I had purchased from iTunes random songs and downloaded lots of my personal albums and now they are gone from my iTunes account and they are in SyncUp.  I never meant for that to happen.  How do I get them back to my iTune

    I have an iPod nano.  Somehow an update for SyncUp appeared and I updated it.  Now all the music from my iTunes account including songs I purchased and my own personal albums are all on SyncUp.  I definitely did not want that to happen.  How do I get my music back to my iTunes account?  Thank you.

    iTunes and Apple's devices work as an ecosystem. iTunes is designed to sync with Apple's products, not anyone else's. You'll need your songs in a format compatable with the Samsung phone and to use the software transfer program supplied/recommended. It is essentially not an Apple/iTunes problem. You may have better luck finding the information you need on Samsung's forums.
    tt2

  • Question about "Linked" pictures and how to get rid of them?

    I have recently upgraded from a 2011 MacBook Pro to a 2013 MacBook Pro and there is a picture under Users & Groups when you go to change the display picture under "Linked" that I can't get rid of, while that isn't really an issue even though I would like to get rid of it if possible, every time I change my picture on Messages, when I close the application and come back into it, that linked picture is my display picture again. Any suggestions?

    I have recently upgraded from a 2011 MacBook Pro to a 2013 MacBook Pro and there is a picture under Users & Groups when you go to change the display picture under "Linked" that I can't get rid of, while that isn't really an issue even though I would like to get rid of it if possible, every time I change my picture on Messages, when I close the application and come back into it, that linked picture is my display picture again. Any suggestions?

  • How can i save a photo album that i created on my iPhone 4s on my PC?  I have about 10 albums and I want to save them in their own folders on the PC.

    how can i save a photo album that i created on my iPhone 4s on my PC?  I have about 10 albums and I want to save them in their own folders on the PC.  When hooking up the phone to the PC, all i see is the individual photos.  I have an iMac and a sony vaio, so i am open to transfer on either machine.
    Thanks in advance

    Have you had any luck with this? I want to do the same thing and my individual photo albums on my iPhone won't tranfer to my laptop or iPad....only the pictures.

  • Dear Customer Service Team,  I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I

    Dear Customer Service Team,
    I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I can not find it and now I only have access to the trial version.
    Thank you for your help in advance.
    Kind Regards,
    G. Zsolt

    There is no serial number require for Creative Cloud products, you may activate the products using your email address and password which is associated with Adobe. If your Dreamweaver asking for serial number, then make sure you are signing in with correct email address.
    You may also refer below link
    Sign in, activation, or connection errors | CS5.5 and later

  • Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

    Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

    Hi ,
    You might want to refer the following link to find your serial number and activate your software .
    Here is the link for the same.
    https://helpx.adobe.com/x-productkb/global/find-serial-number.html
    Let us know how it goes .We'll do the best possible to get your issue fixed.
    Regards
    Sukrit Dhingra

  • Basic Questions About Compiling Source

    Hi!
    I have some very basic questions about compiling source on 10.6. BTW, if the unix discussions still exist, they've hidden them pretty well, so I hope I'm in the right place for this!
    First off, you simply cd to the source dir, wherever it may be - in my case ~/Downloads/source/  - and during the install process, everything will be installed in its proper dir, right?
    How do you know which compiler to use? There seem to be several: make, gmake, gcc, g++, etc...
    Once you do figure out which compiler to run, the process is supposed to go like this, right?
    ./configure
    make (or whatever)
    make install
    But this doesn't always work for me. For instance, I'm trying to compile 'arm', but it doesn't seem to have a 'configure' script.
    $ ls ~/Downloads/arm
    ChangeLog
    README
    armrc.sample
    setup.py
    LICENSE
    arm
    install
    /src
    Maybe it's that 'setup.py' file? What are you supposed to do?
    Of course, it's not only this one that's given me trouble. Sometimes the readme will say I have to edit a certain file for my system. Are there just a few standard changes you always make? Or is it...how can I put it...complicated? How do you find out what's needed in those cases?
    OS 10.6.8
    Xcode 3.2.4
    Python 2.7

    sudont wrote:
    I have some very basic questions about compiling source on 10.6. BTW, if the unix discussions still exist, they've hidden them pretty well, so I hope I'm in the right place for this!
    This is the place for UNIX discussions. If you have developer-related questions, there is a forum dedicated to that as well: Developer Forums
    First off, you simply cd to the source dir, wherever it may be - in my case ~/Downloads/source/  - and during the install process, everything will be installed in its proper dir, right?
    Yes. Hopefully the project you want to install follows standard conventions. If so, you can do "./configure", then "make", and finally "sudo make install" to install the software into "/usr/local".
    How do you know which compiler to use? There seem to be several: make, gmake, gcc, g++, etc...
    The make file will figure that stuff out.
    Once you do figure out which compiler to run, the process is supposed to go like this, right?
    ./configure
    make (or whatever)
    make install
    Yes, with the addition of "sudo" before "make install" because "/usr/local" is owned by root.
    But this doesn't always work for me. For instance, I'm trying to compile 'arm', but it doesn't seem to have a 'configure' script.
    $ ls ~/Downloads/arm
    ChangeLog
    README
    armrc.sample
    setup.py
    LICENSE
    arm
    install
    /src
    arm? You mean "arm (anonymizing relay monitor) - Terminal status monitor for Tor relays." You really don't want to be messing with that stuff. The only people involved with Tor that are trustworthy are US Navy intelligence who have their own uses for it. If you don't understand it as well as they do, best stay away.

  • Some questions about Skype Manager and Skype Conne...

    Hallo,
    I found one of your post:
    That, if I have some questions I may contact with  Contact our solutions team
    Sadly that link wont work...
    I have few questions and also I contacted with Microsoft support, but sadly they wasn’t able to help me. Only what they suggests, that I may contact with Skype Team trough to Forum, or Facebook...
    So, I choose first one and maybe you can help me, or redirect my question !?
    About my questions:
    As I understand Skype for business is just name what contain two free software, like Skype manager and Skype connect. Also those are free, without charge ?
    Also I read that there are two different accounts, like Premium and regular one. Premium contains some benefit. So, If I use that Skype for business manager system to I may or can add some premium accounts for some my staff and leave others with regular account ? I don’t have that manager systems installed jet, but what I read, I understand that I maybe just split credit - or is there way how I may also share regular and premium conots ?
    Also, Right now my customers have 25 workers, but what - if soon my another customer also want to use Skype Service, and he have 50 - 100 workers ? Will be there special price for different amount of users on one firm ?
    And at last, firm who I represent right now are using Elion VoiP (Elion, is Estonian ISP) service, trough to xLite program. 
    Sadly that one wont work properly, it will hack, or you cant hear other people and so on. With, Skype everything works fine. So, if he will starting to use Skype manger and will make account for every workers (sips) can he bound those sips with same VoiP numbers what he will use right now with Elion ? Or if not, is there some way how to redirect those numbers (to lose those numbers, is sadly out of question) ?
    I hope, you can help me guy´s.
    Best regards
    Rainer

    Tere Rainer,
    indeed we don't have the solutions team offer any longer. Let me try to answer some of your questions here.
    Skype Manager and Skype Connect itself are free of charge. But obviously you can purchase and distribute paid products via Skype Manager.
    Yes, you can freely distribute Premium subscription to Manager group members and leave others without. You can do the same with all kind of Skype products, e.g. Skype numbers, calling subscriptions etc.
    There are no discounts with Skype Manager purchases. It's a tool to simplify administration.
    Unfortunately you cannot transfer numbers to Skype connect. For more details on which features are supported and how they work please have a look here: https://support.skype.com/en/faq/FA10549/what-is-s​kype-connect-and-how-does-it-work
    I hope my answers could help a bit already.
    Tervitustega Mustamäelt.
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • A question about compiling

    Hello, i have a question about compiling. I always presumed that when a class is compiled and then run, the import statements just tell the executing JVM where to look in the JRE for the said imported classes before loading them into memory (is that correct?)
    What's confusing me is when happens when I write an applet which utilises the netscape.javascript.JSObject class (which after JRE 1.4.1 resides in the $JAVA/lib/plugins.jar). I have no idea what happens, as in does the relevant code get compiled into my .bin file or is that jar just referenced on the excecuting clients machine, and if the latter what happens if they are using a version before 1.4.2 where this class is residing in lib/jaws.jar, or does that not make any difference as the package names are still the same?
    You can see I'm confused and I think this highlights a fundamental gap in my knowledge,
    Thanks for any help!

    r035198x wrote:
    The classes are loaded on application start up. Not allways, no.
    <quote-self>Just use the reflections API.. </quote-self>
    If the JVM doesn't find the required class then your application probably won't have had a chance to try and catch the exception.That's exakery why we use reflections to try to load classes which may or may-not exist.
    PS: Had to do this with xerces classes to ensure we got the right version despite certain versions of Ant prepending it's version to my classpath, darn thing... sort of an "ehaustive search" for class definitions. Booger of an idea.

  • A few questions about the ka790gx and dka790gx

    i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

    It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section.  There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
    As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
    The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
    """Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
    Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
    The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
    For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
    Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
    It's better than nothing, but only just."""

Maybe you are looking for