A question about using the history tool after using the extraction tool in photoshop cs3..

For example:
http://www.layersmagazine.com/photoshop-...
When I use the history tool, it erases the image instead. Whats up with that?

G'day Chris
I can't tell from the link exactly which tutorial you mean!
If the original layer is a white background and the snapshot is set to this then the history tool will paint back white even if you then paste or drag an image onto the layer above this.
You would have to take a seperate snapshot of your image layer and set this layer as the snapshot you want the history tool to use before you start working on it.
One neat thing you can do is if you paint back some detail with the history brush you can immediately go to Edit > Fade and fine tune how much of the effect you want to apply.
Hope this helps.
regards
John

Similar Messages

Hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

Hi,
How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
Get-MailboxFolderPermission -Identity
CEO’s email address:\Calendar -User assistant’s email address
Also check with:
Get-Mailbox -Identity CEO’s mailbox
| fl *GrantSendOnBehalfTo
Please let me know the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Whenever i use pencil tool after completing the fig. the color change ............

I am new to adobe flash cs3 . whenever i use pencil tool after completing the fig. the color changes to green .. even though the box indicates black color ..

See if you have outline mode selected for that layer, or if you have it set for the file.
For the layer look at the last icon on the layer, the small square icon. If it appears as a solid it is not in outline mode, if it appears as an outline of a square, click it to change it to be solid.
For the file level, in the main toolbar choose View -> Preview Mode -> and make sure Outlines is not selected.

I would like to clear my address row history completely, but I never get it totallly emptied. The remaining addresses are not bookmarked, i.e no stars on the row, but still exist after I have emptied all history both via the History link and via the Tools

I would like to clear my address row history completely, but I never get it totallly emptied. The remaining addresses are not bookmarked, i.e no stars on the row, but still exist after I have emptied all history both via the History link and via the Tools link. How come adresses still can exist after I have done this?
== This happened ==
Not sure how often

I clear all history but i still get hints (what i've typed before) when i wanna type something in a site i've visited before!! whats the solution?

Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in. Thanks

Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in.

You don't. Email comes in either by push or when you invoke the email app. Ther is no password except when you first set up the account. If your iPad is not being used as your personal device and you need to shield emails from other users, then don't use the email app. Instead, use web mail if available from your provider.

I would like a Question About Flexconnect HA N+1 After WLC 1 Down and AP go to Joint WLC 2

Hi everyone
I would like a Question About Flexconnect HA N+1 After WLC 1 Down and AP go to Joint WLC 2
-Cisco WLC 8500 = 2 unit version 7.6.130.10
-Mode Flexconnect HA N+1
-AP Joint WLC 1 and 2 mode HA N+1
I would like After WLC 1 Down is AP Go to joint WLC 2 Client associate in AP can use DATA Traffic between AP Failover ??
I think Mode Flexconnect client can use data traffic if WLC 1 , 2 Down becasuse Mode flex data traffic not go to WLC ??
I think true ??
thank you

Hello
You should try a flexconnect deployment
combined with locally switched SSIDs, which
should comply with your requirements.
fp

HT201303 i have tried to perchase a movie and it keeps coming up with questions about my past thet i dont remember the answer to. how do i find out the answers? i have never come across these questions until now

i have tried to perchase a movie and it keeps coming up with questions about my past thet i dont remember the answer to. how do i find out the answers? i have never come across these questions until now

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

On an pci_mio 16e4 programming using nidaq & visual basic, after using AI_Setup analog sequential data accusition stops.To restart I use Init_DA_Brds This takes a long time, What must I reset to restore the analog sequential function?

on an pci_mio 16e4 programming using nidaq & visual basic, after using AI_Setup analog sequential data accusition stops.To restart I use Init_DA_Brds This takes a long time, What must I reset to restore the analog sequential function?
I belive that the trigger is being changed on the io board, but cannot manage to reset it.
The reset process takes in the order of 0.1 sec, and since this is a time critical application, i want to get the scanning function working again faster

Dear Ian. Thank you for your reply. The problem appears to be that the scan trigger(s) are stopped, or something, by the use of the AI_setup instruction. The sytstem works perfectly until this instruction is used. My problem is in understanding what has happened since the help seems to give no detail on any interconnection between the scan system and the external analog trigger system. I have tried to reconnect the triggers, but so far unsucessfuly

I can't install the new itunes after downloading the message says "this saftware requires mac OSX 10.6.8 or later. I have a new iphone 5 that I can't use until I update my itunes. What do I do?

I can't install the new itunes after downloading the message says "this saftware requires mac OSX 10.6.8 or later" I have a new iphone 5 that I can't use until I update my itunes. What do I do?

You will need to Upgrade to Snow Leopard to get a Compatible version of iTunes to Sync your Device.
Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...

When i start Firefox ( 5.0.1 ) it loads the home page fine but along with it, it starts playing a video i watched earlier on youtube and it is invisible ( no where in tabs ) and i can just hear the sound. After playing the video one time it stops.

When i start Firefox ( 5.0.1 ) it loads the home page fine but along with it, it starts playing a video i watched earlier on youtube and it is invisible ( no where in tabs ) and i can just hear the sound. After playing the video one time it stops.

Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
First: Try a clean install, (you have had a none standard version installed previously) that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Second: try a New Profile
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

How to do that when you open a new tab to appear like the start page after opening the browser?

How to do that when you open a new tab to appear like the start page after opening the browser?

https://addons.mozilla.org/en-US/firefox/addon/newtaburl/
Never used it myself, so I'm not sure if you can set to about:home or not. You'll have to give it a try.

What happened to the icon of the "house"? After searching the web or checking my e-mail I could alway click on the house to return to my home page. Now I have to keep clicking the back arrow or enter my home page on my google search.

Question
What happened to the icon of the "house"? After searching the web or checking my e-mail I could alway click on the house to return to my home page. Now I have to keep clicking the back arrow or enter my home page on my google search. edit

The home button has by default moved to the right hand edge of the navigation toolbar. You can move it back by right-clicking on a toolbar, choose customize to open the customize toolbar window, then with that window on display you can drag and drop icons to move them.
If the home icon is not at the right end of the navigation toolbar, use the procedures in the following link to restore it - https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

URGENT: I lost the Lion Partition after repairing the Windows 7 partition

URGENT: I lost the Lion Partition after repairing the Windows 7 partition
I have recent bought a new Macbook Pro and then I start doing all the necessary setup. This is the first time I do such setup with bootcamp myself anyway.
1st: normal MacOS setup, the Lion version has been setup perfectly.
2nd: run the bootcamp and setup the Windows 7, done perfectly as well.
3rd: try to partition and resize the harddrive with the Lion installed and create 2 new FAT partitions (now 4 partitions in total: 1 for Lion, Journaled, 1 for Windows 7 in NTFS, 2 for file sharing purposes in FAT). See if I can have better partitioning to do necessary organisations.
4th: When I want to restart in Windows to see if the newly created 2 FAT partitions can be read in Windows environment and can function norally, the Windows setup does not show at the start up page when I hold the "Option" key during the startup. I then try to restart again, still no such partition but boot directly to Lion.
5th: I tried to repair the Windows 7 with the start up disc and then it worked. I can also see the 2 newly partitioned FAT drive work normally.
6th: When I want to restart in Lion, I cannot boot the Lion OS and I cannot find the start up icon on the startup page even with me holding the "Option" Key.
7th: "MacOS Installation Utility" appears. I tried to repair but cannot as I have neither the Lion setup disc with me (coz the Lion has been pre-installed) nor a time machine backup/ any other backup image to load from.
8th: Tried to "erase and install a new copy of Lion", the partition where the Lion has been previously installed cannot be shown, now indicate itself as "freespace" and not able to be selected for my "erase and reinstall" process.
9th: so I go to 2 other FAT drives to do as the instructions to try "erase" and hope the "reinstall" process can be started. But the Disk Utility ends up saying the drive cannot be dismounted/ cannot verfy...
At the end of the many tries, I tried to shut the computer down and restart again, hopefully something will work still.... the startup page now shows a disk image with ?, I guess NO OPERATION system/ drive detected for booting. So I got a piece of metals without any use now...
Anybody help? Thanks alot!!

In Windows, go to Control Panel -> System. Do you see a Boot Camp option? If you do not, please download BC drivers as appropriate for you specific Mac year/model System requirements to install Windows on your Mac via Boot Camp - Apple Support
and Boot Camp: Install or repair Boot Camp drivers.
The other option is to use
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
How to Reset NVRAM on your Mac - Apple Support

I have my FireFox browser set to delete the history when I close the window. It was working for a while and has recently just stopped with no changes to the settings.

I have my FireFox browser set to delete all the history when I close the window. It was working for a very long time and has recently stopped with no changes to the settings. This has happened once before and I deleted FireFox and re-downloaded it, that solved the problem for a short period of time but the issue has come up again. How can I fix this?

Can you check your configuration again? Maybe something went pear-shaped somewhere. It's located in Tools | Options | Privacy and then click the Settings button (see screenshot).

How to make the document dirty after updating the links?

Hi,
I am using the below code to update the link resources by providing new URI. The link resources are getting updated, but the document is not becoming dirty.
 InterfacePtr<ICommand> updateCmd(CmdUtils::CreateCommand(kLinkResourceStateUpdateCmdBoss));
 InterfacePtr<ILinkResourceStateUpdateCmdData> updateCmdData(updateCmd, UseDefaultIID());
 updateCmdData->SetResource(ref.GetUID());
 updateCmdData->SetDatabase(ref.GetDataBase());
 updateCmdData->SetNotify(true);
 updateCmdData->SetUpdateAction(ILinkResourceStateUpdateCmdData::kUpdateURI);
 updateCmdData->SetURI(newURI);
 updateCmd->SetUndoability(ICommand::kRegularUndo);
 CmdUtils::ProcessCommand(updateCmd);
How do I make the document dirty after updating the resources?
Thanks,

Thanks. It is working fine.
I called PreDirty(docPtr), before updating the links.

How to change the Data sources after deploying the application ??

Hi All,
i want to know how to change the Data sources after deploying the application to the application server ???
I'm using Oracle Application Server 10g Release 3 (10.1.3.1.0)

Can you access the Enrprise Manager website of the target Application Server from your location? If so, you can change the datasource in it. If not, yo can bundle the datasource definition in your archive and use that one instead of the one configured in the target OC4J container. Or this will just be the responsability of your customer: whenever you send a new WAR file, they have to modify the datasource if needed and deploy the application?

A question about using the history tool after using the extraction tool in photoshop cs3..

Similar Messages

Maybe you are looking for