[ A/R credit Memo-Document Status],G/L accoutn is missing(1)

Dear Expert,
I have generate A/R Cr. Memo now it should me error...

Hi Kevin ,
Check Sales Credit account are mapped in GL Determination->Sales Tab
Check Sales Credit account & Sales Return Account in warehouse accounting tab
Regards
Jambulingam.P
Edited by: Jambulingam P on Jun 11, 2009 9:21 AM

Similar Messages

  • Error during Cancelation Credit memo document in trasaction MR8M

    Hi experts,
    I have a problem in the transaction MR8M during cancelation credit memo document. The error message no. F5808 occured: The value for field "Part. Bank" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "160000" in company code "XXXX" linked to the field selection for posting key "31".
    I checked the field status group for the G/L account 160000, but there is no mandatory field for "Part. Bank". In the posting key 31 is mandatory field "Part. Bank", but problem is, that for the posting key 21 - Credit memo should system use the Reversal posting key 32, which is adjusted in the transaction OB41. I don´t know why the system want to use posting key 31 by reversing credit memo intead of posting key 32, which is in customizing.
    Moreover, I tried to post simple document in FI module with posting key 21 and by reversing this document system used the correct posting key 32, where the field "Part. Bank" is suppress field.
    Do you have any ideas?
    Thanks a lot
    Miroslav

    we just had the same error message F5808 giving the same wrong posting key 31 for credit note cancellation instead of 32.
    We solved the issue like this:
    -access the follow-on document in accounting by FB02
    -complete the field which is said to be mandatory as per the error message
    The change in the FI document is of course not transferred back to the original LIV document but after having "completed" the follow-on document we were able to cancel the LIV document with MR8M without the error message we had before.
    I'll keep Pablos breakpoint (thanks!) in mind if this happens again with a field that cannot be accessed in FB02.
    Regards
    Mark

  • Credit memo request status is being processed

    hi gurus, we raised a credit memo for partial amount of invoice. in document flow credit memo request status is showing as being processed. when does the status change as completed. what step we

    Hi Lakshmipathi,
    Thank you once again for the prompt reply, in the document flow it shows it has been invoiced and a credit memo request has been generated, then a credit memo with reference to credit memo request for partial amount of invoice has been created. In document flow it is showing as credit memo request is being processed. so what would be the next step to invoice customer for the remaining amount of invoice.
    Thank you in advance,
    Naga.

  • Order related inter company credit memo - Order status 'Not Invoiced'

    Hi,
    We have recently created 'Order related inter company credit memo' process for return Stock Transport Orders(STO). For this, we used order related billing (billing relevance = C i.e. Relevant for ord.-related billing - status acc.to target qty) with standard item category 'G2N'. The issue is even after invoicing, sales order item status is 'Not Invoiced' and header status is 'Open', hence these orders are picked up multiple times during background invoice run and multiple invoices are being created.
    How do we control the 'Completion' status in order related inter company billing? VBUP-FKSAA is not changed even after billing document creation and remains as A i.e. Not yet processed. Do i need to check VBUP-FKIVP since this is inter company billing.
    I have also tried with TVAP-FKREL as 'B' i.e. Relevant for order-related billing - status according to order quantity but of no use.
    Please advise.
    Thanks in advance.
    Regards,
    Ganesh
    Edited by: Venkata Ganesh Perumalla on Nov 10, 2010 6:08 PM

    HI,
    Check too the Note 308989 - Consultant note for cross-company transactions
    It says:
    I.1.5 Returns request (IR) - returns delivery - customers credit memo -
    intercompany credit memo (IG) (RETURNS)
    The customer credit memo is created for the returns request and the
    intercompany credit memo is created for the returns delivery.
    Regards,
    Eduardo

  • Credit Memo Request - Status Open

    Hello ALl,
    I have credit memo created, user want me to delete whole process. So i have canceled the credit memo.
    And i have rejected the credit memo request but still my items are still has status of open?? And my over all document is has open status.
    And it is the same for the debit memo request??
    Can any one tell me how can i delete the whole process??
    Thanks
    Sundar

    Hi Sundar,
    I have tried the same scenario.Kindly follow the below steps and confirm.
    1. Once you cancel the subsequent documents.
    2. Goto the Credit memo request and select the Item data enter the Reason for rejection in Sales A Tab and Save.
    3 . Create the billing document and the value will be zero.
    Now status will be shown as completed.
    Regards,
    Shahinsha

  • Receivable Credit Memo document sequencing

    Hi,
    How can we implement gapless document numbering of Credit Memos in AR? Is it the same as the setup for Invoice? wherin we define document sequences and assign?
    I create a dcoument sequence for the
    Thanks for the help.
    Regards,
    Mangvoc

    Hello.
    Yes, the steps are the same.On the first step, when defining the sequence, make sure you define it as Gapless.
    Octavio

  • Credit memo request status to be complete

    Dear All,
    I have a scenario where I need to put the status of the credit memo request to be set to ‘completed’
    Subsequent credit memo is archived as this credit memo req is very old ..from year 2009
    Screen shot attached for your reference.
    I tried by putting the reason for rejection for the items but when I look at the status of the Credit memo req.. the status doesnt show up.. its blank.
    If I follow this process for sales order.. the overall status is showing as completed after the items are rejected.
    Can anyone please guide me how to change status to "completed"
    Regards,
    Kiran

    Dear Kiran Sap
    I tried by putting the reason for rejection for the items but when I look at the status of the Credit memo req.. the status doesnt show up.. its blank.
    Yes it is sap standard One only....I Think we cant show that completed please check it and hope comments from Experts

  • GL Account Missing: A/R Credit memo

    Hi
    I am getting error : "GL Account Missing: A/R Credit Memo".
    Please suggest.
    Regards

    Hi,
    You can go through the following EES session regarding the error :
    [G\L Account Missing|https://websmp210.sap-ag.de/~sapidb/011000358700000325072008E.zip]
    You can also have a look at the following thread :
    Re: [ A/R credit Memo-Document Status],G/L accoutn is missing(1)
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • A/R Credit Memo

    hi all !
    i have returned some goods back to my customer.
    to update stock i have to create credit momo .
    so,i have created credit memo.it is showing an error of this type "A/P-Credit Memo,Document Number,G/L Account is missing"

    Check the following  PDF on Expert Empowerment Session which explains you the solution to 'G/L Account missing error"
    [https://websmp201.sap-ag.de/~sapidb/011000358700000894762007E/FIN_CW39_ErrorGLAccMissing.pdf]
    Check this link for the WEbex recorded file
    [https://websmp201.sap-ag.de/~sapidb/011000358700000894772007E/FIN_CW39_ErrorGLAccMissing.wrf]

  • A/R Credit Memo   --  G/L Account

    Hi All,
    when i am adding an A/R Credit memo into the B1 system the error message appearing as follows :
    "A/R Credit Memo - Document Number, G/L Account is missing"
    What could be the reason ?
    thanks
    Venkat

    The G/L Account the Credit Memo transaction looks for is the Sales Credit Account
    Please check if in Admini > Setup > Financials > G/L Account Determination > Sales Tab...Sales Credit Account has been defined.
    This G/L setting is copied to the Warehouses Accounting Tab / Item Group Accounting Tab depending on how your Set G/L Accounts By is set in System Init > General Settings > Inventory Tab
    Based on this, if it is Warehouse based you will need to chech the warehouse definition accounting tab of the warehouse you are creating your Credit Memo on or if it Item Group then check the Item Groups Accounting tab of the Item group of the Items on your  your Credit Memo.
    Suda

  • G/L account is missing error when try to add AP Credit Memo

    Dear All Experts,
    we are facing problem in adding A/P Credit memo, which is made based upon AP Invoice.
    Error is :-  [A/P Credit Memo - Whse Status] , 'G/L account is missing (1)'  [Message 131-46]
    Can any one know why this problem is coming?
    Regards,

    Hi,
    If the item is not an inventory item but a sales item, check if the particular item belongs to an Item Group.
    If Yes then go to Administration -> Setup -> Inventory -> Item Group
    Move to the Item Group where your item belongs to and under the Accounting tab, check whether the Account names are defined with Account codes.
    Thanx.
    Hari

  • Document Type is Changing While Doing Credit Memo

    Hi Experts,
    I am doing the AR Credit Memo, based on (copy from) AR Invoice, Once i copied all the data, i am just adding the document.
    While adding the document, system popups the serial number selection screen, ( my items are managed by serial number), so at the time of loading serial number selection screen my AR Credit memo document (matrix) type goes to Service type automatically.
    But if  i continue to add the document, its getting added.
    Serial Number Transaction report is given correct data and Inventory Posting too.
    Its very strange.
    Can anyone suggest me how to overcome from this issue and what is the problem.
    Technical Information:
    SAP Business One 8.8
    Service Pack 00
    Patch Level 12
    DB:  MS SQL Server 2008
    Server: Windows 2008
    Client : Windows XP
    No Customized or standard add ons connected to the company.

    Hi Mr. Sanju Sivan,
    Even my line items are having more than 20 Serial Numbers.
    Hi Mr. Jambulingam,
    The Journal Entries are posted correctly, document added properly, inventory is fine, serial number transaction is also fine.
    For your ref.
    Journal Entry for that document. Document Value is 10400.00 (500 Unit Price * 20 Qty + 4% VAT)
    Accounts                               Debit                         Credit
    Customer Account                                                   10400.00
    VAT 4% Output                          400.00
    Sales Return                           10000.00
    Stock Account                          9845.00
    COGS                                                                9845.00

  • SAP Revenue recognition Credit Memo Accounting document

    Hi,
    One of our client uses SAP Revenue recognition to post revenue. They have implemented the Service related revenue recognition (revenue recognition category B) and also process credit/debit  memo with reference to preceding docuemnt
    "F". Each month a debit memo is issued ot the customer for the services performed. Eventually we create credit memos when the customer disputes a particular debit memo invoice. Debit memo and credit memo documents
    are created with DP96.
    The issue they have currently is with the credit memo account document postings. Client credit memo accounting documents are making postings to unbilled revenue accounts. The postings remain as  debit postings in unbilled revenue accounts even after revenue is recognized for an order. According to them accounting rules do not fulfil with the credit memo postings to the unbilled revenue account. Hence we need your expert advice/opinoins.
    Please reply as soon as possible because its very high priority issue.
    Thanks & Regards
    K.R.

    Hi,
    Please check the reason for value not flowing to the header data of the billing document.Once you get the value of the document tin the header , there will be no issue in creating an accounting document.
    Check the item category of the credit memo.
    Regards,
    Phani Prasad

  • Deleting credit memo request is not possible - why?

    I cannot delete a credit memo request after cancelling a credit memo because system says there are subsequent documents created for this.
    But this is not the case of our regular order - dly - bililng scenario, one can cancel the invoice, reverse the delivery, delete the delivery and delete the sales order at last.
    My question here is, why does system allow us to reverse everything and delete in our regular sales - billing scenario and NOT in credit memo requests?
    Thanks in advance

    Hi
    Last week even i encountered the same situation.
    You cannot delete a Credit memo request. Instead you have to reject all the line items in Credit memo request.
    Make sure you have cancelled all the credit memo created in reference to teh Credit memo request. After all teh credit memo have been cancelled. Go to credit memo request and select all the line items in the Credit memo request and reject the line items.
    A pop up will appear select any of the reason and save the document. The credit memo request will be cancelled.
    You can see the difference in the Status of the credit memo request before cancellation and after cancellation.
    Before cancellation the status will be displayed as OPEN after cancelling the Credit memo request status will be blank.
    Hope this helps you
    Regards,
    Arun.S

  • Sale Order Credit Block due to open credit memo

    Dear All,
    System is blocking sale order for open items(credit). And the only open item is credit memo.
    Can we avoid credit note to be considered as open item?
    Thanks
    Arun

    Dear Arun,
    Do not think this is possible in standard.
    I would suggest the following way.
    Currently system is giving a message during sales order creation . right?
    Ask your abaper to find an EXIT before that point.
    There write a code to exclude CREDIT MEMO document types from BSEG of the customer code.
    It is possible as i have worked in similar requirement.
    Check and revert back.
    Thanks & Regards,
    Hegal K Charles

Maybe you are looking for