A/R Extractor, Validation, and Enhancement......

Hello ALL
Need HELP in undesrtanding A/R extraction and validation. Also need your help in LOGIC for Enhancement:
1. We use 0FI_AR_4 to pull in data into ODS. As a Std. BC data surce and cube, the mapping includes 0DOC_NUMBER
     (SD Document Number) mapped to the field "VBELN". When I check the data in the ODS, I do see records with values
     for 0DOC_NUMBER. However, when I check the table "BSID" (data source table for 0FI_AR_4, I don't see any of the
     values. So can some pone please tell me where am I going wrong in validating the values?? How can I proceed?
2. What does "VBELN" correspond to....? Assuming it to be "Sales Order Number", I tried to check these values in the SD
     tables - VBAP and VBAK. Both the tables do not have these Document Numbers....! So I am not sure of what this
     Doc. Number represents? Is it "Invoice Number"...? How can I validate the SD Doc Number (VBELN) that is coming
     from 0FI_AR_4 with SD Tables? Which table(s) should I check??
3. The A/R datasource needs to be enhanced to bring the Sales org; Division, Dist. Channel. I am hoping to do this in CMOD
     by appending the extract structure. I was hoping to match the "SD Doc Number" (VBELN) coming from 0FI_AR_4 to VBELN
     in the table "VBAP" & "VBAK" and then get the Sales org, Div and Dis Chan for matching records. Does this sound right?
     But since I am unable to match the value of VBELN in any of the tables (BSID, VBAK, VBAP), I don't know how this logic
     would work....? What would be the logic to grab the 3 fields (Sales Org, Div, & Dis Chan)?? Will I need to bring the
     Line Item number from BSID (field VPOS2)..?
Can someone pelase suggest the answer to each of the above..... as they are related to one another. Suggestion on the
LOGIC for enhancement would be greatly HELPFUL.....!!
Thanks...... MKAM

Hi,
FI -AR and SD is integrated modules. Any transction done by the SD it will effect in FI also.
May'be in R/3 side they are not integrated properally just check it once in FI functional guys.
Thanks & Regards,
Venkat.

Similar Messages

Releasenotes, bugfixes and enhancements

Hello,
I'm currently using Headstart version 6.5.1(.0). Can anyone send me the releasenotes, bugfixes or enhancements of all patches since then till version 6.5.3., or can anyone give me a good reason of upgrading.
All can be send to [email protected]
Thank you very much.

Kristof,
The release notes of all patches.
Headstart Oracle Designer PATCH 6.5.3.0 FOR 9i
==============================================
This patch is ready for use with Designer 9i, Forms 9i and Reports 9i.
Also it addresses the following bugs and enhancement requests
(mostly the same that are addressed in PATCH 6.5.3.0 FOR 6i):
Bug No. Description
====== =======================================================================
2309129 - ERROR IN UNLD_RPTS.SQL SCRIPT
2309202 - NAVIGATOR FORMS DO NOT HAVE CG$STARTUP_MODE, CAUSES ERROR
2441289 - SAVE BUTTON STAYING DISABLED WHEN IT SHOULD BE ENABLED
2482013 - LOGGING INTO 9I SERVER AS SYS MUST BE DONE AS SYSDBA
2483045 - CHANGE OBJECT LIBRARY USAGE STANDARD IN HEADSTART USER GUIDE
2497339 - CALENDAR-LOV WITH TIME HAS EXTRA BUTTONS, PROBLEM WHEN NULL VALUE
2499198 - USE CALENDAR LOV, GET FRM-40102: "RECORD MUST BE ENTERED OR DELETED
FIRST"
2504387 - SET QMSOLB65.OLB DISPLAY ONLY ITEMS (CGSO$%_DO) TO ENABLED=YES
2520101 - OFGTEL65.PLL CANNOT BE COMPILED AGAINST HST65 TEMPLATE PACKAGE OWNER
2520119 - GENERATION OF HEADSTART DEMO FORM HSD0034F GIVES CDG-01117 INVALID
DISPLAY TYPE
2520191 - MESSAGE QMS-00125 DOES NOT EXIST IN QMS_MESSAGE_PROPERTIES, USED IN
QMSLIB65
2521218 - HEADSTART 6I DOES NOT COMPILE WITH FORMS 9I
2529003 - CAPI SHOULD NOT INCLUDE COLUMNS WITH COMPLETE = NO
2570562 - 'SAVE OLD DATA' NOT GENERATED WHEN CAPI UTILITY PARAM
'TAPI TRIGGERS' IS NO
2600939 - IF SUBTYPE ATTRIBUTE MAPPED TO MULTIPLE TABLES, UTILITY CAN TAKE THE
WRONG ONE
2605551 - STILL HAVE CODE FOR '_CASDEL' IN QMSLIB65.PLL QMS$FORMS_ERRORS
2635597 - HEADSTART 6.5 UTILITIES THAT CALL BLTEXT.DELETE_TAGGED_BLOCK FAIL
2635613 - CALL TO QMS$BLOCK.GO('<BLOCK NAME>') IN QMSLIB65 IS CASE SENSITIVE!!
2635789 - CAPI VALIDATED BUSINESS RULE AGAINST WRONG ROW FROM INTERNAL ROW
STACK
2651107 - CHANGE_CONNECTION DOES NOT UPDATE ENTIRE INFO ABOUT APPLICATION
Headstart Oracle Designer PATCH 6.5.3.0 FOR 6i
==============================================
This patch addresses the following bugs and enhancement requests:
Bug No. Description
======= ======================================================================
2309129 - ERROR IN UNLD_RPTS.SQL SCRIPT
2309202 - NAVIGATOR FORMS DO NOT HAVE CG$STARTUP_MODE, CAUSES ERROR
2482013 - LOGGING INTO 9I SERVER AS SYS MUST BE DONE AS SYSDBA
2441289 - SAVE BUTTON STAYING DISABLED WHEN IT SHOULD BE ENABLED
2483045 - CHANGE OBJECT LIBRARY USAGE STANDARD IN HEADSTART USER GUIDE
2497339 - CALENDAR-LOV WITH TIME HAS EXTRA BUTTONS, PROBLEM WHEN NULL VALUE
2499198 - USE CALENDAR LOV, GET FRM-40102: "RECORD MUST BE ENTERED OR DELETED
FIRST"
2504387 - SET QMSOLB65.OLB DISPLAY ONLY ITEMS (CGSO$%_DO) TO ENABLED=YES
2520101 - OFGTEL65.PLL CANNOT BE COMPILED AGAINST HST65 TEMPLATE PACKAGE
OWNER
2520119 - GENERATION OF HEADSTART DEMO FORM HSD0034F GIVES CDG-01117 INVALID
DISPLAY TYPE
2520191 - MESSAGE QMS-00125 DOES NOT EXIST IN QMS_MESSAGE_PROPERTIES,
USED IN QMSLIB65
2529003 - CAPI SHOULD NOT INCLUDE COLUMNS WITH COMPLETE = NO
2570562 - 'SAVE OLD DATA' NOT GENERATED WHEN CAPI UTILITY PARAM
'TAPI TRIGGERS' IS NO
2600939 - IF SUBTYPE ATTRIBUTE MAPPED TO MULTIPLE TABLES, UTILITY CAN TAKE
THE WRONG ONE
2605551 - STILL HAVE CODE FOR '_CASDEL' IN QMSLIB65.PLL QMS$FORMS_ERRORS
2635597 - HEADSTART 6.5 UTILITIES THAT CALL BLTEXT.DELETE_TAGGED_BLOCK FAIL
2635613 - CALL TO QMS$BLOCK.GO('<BLOCK NAME>') IN QMSLIB65 IS CASE SENSITIVE!
2635789 - CAPI VALIDATED BUSINESS RULE AGAINST WRONG ROW FROM INTERNAL
ROW STACK
2651107 - CHANGE_CONNECTION DOES NOT UPDATE ENTIRE INFO ABOUT APPLICATION
Headstart Oracle Designer 6i PATCH 6.5.2.3
CDM RuleFrame Performance Improvement
==========================================
The main purpose of this patch is to improve the performance of the
CDM RuleFrame engine when large transactions are involved.
The functionality of CDM RuleFrame is only slightly changed by this patch:
- The utility 'Create CAPI Custom Service' makes it possible to include
a CAPI Custom Service (i.e. your own package or function) in more
than one CAPI (see "BUG 2419371" below)
- The utility 'Create VAPI Definition' can now also create VAPI's for
subtypes (controlled by new utility parameter)
This patch addresses the following bugs and enhancement requests:
Bug No. Description
======= ======================================================================
2070417 - PERFORMANCE ENHANCEMENT SUGGESTION FOR DISABLING CDM
RULEFRAME IN BATCH MODE
2204246 - USE NATIVE DYNAMIC SQL FOR RULEFRAME RUNTIME
SOFTWARE
2220682 - IMPROVE RULEFRAME RUNTIME PERFORMANCE WITH NOCOPY
IN TRANSACTION MANAGEMENT
2220697 - RULEFRAME STACK: USE TEMPORARY DATABASE TABLES INSTEAD
OF PL/SQL TABLES
2220707 - STORE ROWS IN RULEFRAME ROW STACK ON AN INDEX CALCULATED BY
A HASH FUNCTION
2220908 - ELIMINATE ROW STACK FROM CAPI AND MAKE OLD ROW STACK SMALLER
2227746 - ENHANCE RULEFRAME PERFORMANCE BY MINIMIZING CAPI USE OF
FIND_ON_STACK
2249250 - WHEN CREATING CAPI FOR TABLE WITH MANY COLUMNS: ORA-06502 VALUE
ERROR
2259418 - IMPROVE RULEFRAME PERFORMANCE BY ENFORCING CERTAIN RULES
IMMEDIATELY
2394119 - RUNNING UTILITIES ERR.SQL GIVES ORA-20000: ORU-10028: LINE
LENGTH OVERFLOW
2394166 - WHEN BUSINESS RULE ALREADY EXISTS, UTILITY STILL TRIES TO
INSERT TRIGGER
2396132 - UTILITY JOURNALLING BUSINESS RULES ORA-01401: INSERTED VALUE
TOO LARGE IN BLTEXT
2419371 - POSSIBILTY TO USE SAME CUSTOM SERVICE IN MORE THAN ONE CAPI
PACKAGE
2441447 - REMOVE WORKAROUND FOR BUG 1347738 IN CAPI GENERATOR (HSU_CAPF)
2481957 - DEFAULT IN SPECIFICATION OF HSU_BRTR.RUN AT WRONG PARAMETER
2485658 - CDA-01305 COLUMN UID - WHEN SAVING RESULTS OF REFRESHING JOURNAL
TABLE UTILITY
Headstart Oracle Designer 6i PATCH 6.5.2.2
==========================================
This patch addresses the following bugs and enhancement requests:
Bug No. Description
======= ======================================================================
2283093 - RUNNING REPORTS USING DESTYPE=CACHE FROM REPORT LAUNCH FORM
2283122 - ERROR WHEN CLOSING WINDOW AFTER DUPLICATE RECORD KEY
2285936 - PROBLEMS WITH REPORT LAUNCH FORM IN 6.5.2.1 SUPPLEMENT OPTION
2303927 - QMS0012 REPORT LAUNCH FORM NO DEFAULT VALUES IN PARAMETERLIST AFTER
STARTUP
Headstart Oracle Designer 6i PATCH 6.5.2.1
==========================================
This patch addresses the following bugs and enhancement requests:
Bug No. Description
======= ======================================================================
1696475 - ONLINE HELP FOR REPORTS HAS STRANGE URL
1702857 - ORA-00600 WHEN TRYING TO RUN HEADSTART FORM USING FORMS DEBUGGER
1727439 - POOR PERFORMANCE IN UTILITY 'CREATE CAPI DEFINITION'
1727886 - ERRORS IN 'CREATE CAPI DEFINITION' UTILITY ARE IGNORED
1747626 - RULEFRAME 6I BUS. RULE VIOLATION ON DELETED RECORD GIVES ORA-01403
OR QMS-00100
1754565 - PROCEDURE QMS$ABOUT_THIS_APPLICATION IS MISSING IN YOUR APPLICATION
LIBRARY...
1754740 - SETUP PART OF USER GUIDE SHOULD MENTION ACCESS TO HEADSTART DATABASE
OBJECTS
1754906 - CREATE FIND WINDOW(S) - SAVING CHANGES FAILED WITH CDA-01151
1764270 - CHAPTER 17 REFERS TO SCRIPT HSU_USER.GRT, WHICH IS NOT AVAILABLE
1769077 - SERVER SIDE INSTALLER SAYS USER ALREADY INSTALLED WHEN MANUAL IMPORT
UTILITIES
1769234 - LONG BLOCK.ITEM NAME RESULTS IN QMS-00100: ORA-06502:
PL/SQL: NUMERIC/VALUE ERR.
1769321 - VALUE ERROR IN HTML ONLINE HELP GENERATOR WHEN ITEMS HAVE LONG HINT
TEXTS
1781424 - CDM RULEFRAME: TRIGGER ALREADY EXISTS ERROR EVEN IF TRIGGER IS IN
OTHER FOLDER
1781454 - CREATE DOMAINS FOR DISCRIMINATOR COLUMNS TRIES TO UPDATE DOMAIN IN
WRONG FOLDER
1802399 - WHEN VIEWING LOG: UNHANDLED EXCEPTION IN VIEW_LOG_MESSAGES:ORA-06502
1832171 - DROP THE PK ON QMS_TRANSACTIONS FOR PERFORMANCE REASONS
1869480 - REPORTS MODULES NOT SHOWN IN MULTI SELECT LIST OF UTIL SET
IMPLEMENTATION NAME
1877521 - ORA-06502 WHEN MAINTAIN BUSINESS RULE DESIGN DEFINITIONS FOR STATIC
DOMAINS
1885204 - BUSINESS RULE TRANSFORMER: TRIGGERING EVENT <X> IS INVALID.
IT HAS NO ENTITY...
1890011 - UNABLE TO GENERATE DEFAULT NULL PARAMETER IN CAPI CUSTOM SERVICE
1890029 - HSD 65 USER GUIDE MENTIONS STFFMB PREF.INST. OF PREF.
SET QMS65_LOV_MODULE
1890035 - SMALL OMISSIONS AND TYPOS IN HEADSTART 65 USER GUIDE
1891637 - REDIRECT HEADSTART REFERENCED OBJECTS: INVALID VALUE FOR OLD QMS
APP VERSION
1978916 - WITH OLD DB TRIGGER, SEE 'ORA-20998'IN FORM INSTEAD IF THE ACTUAL
MESSAGES
1979278 - F9 DOES NOT WORK FOR LIST OF VALUES ON MODAL DIALOG FORM
(ALSO UP/DOWN)
1985903 - APPLICATION CLOSES WHEN USING MULTI-SELECT FEATURES IN MODAL DIALOG
WINDOW
1987743 - ORA-06508: PL/SQL: COULD NOT FIND PROGRAM UNIT.. <TAPI PACKAGE>.INS
2093405 - WHEN INSTALLING HEADSTART IN A 9I DATABASE, CG$ERRORS WON'T COMPILE
ANYMORE
2101690 - ONLINE HELP FOR REPORTS (QMS0012F) DOESN'T WORK
2148764 - CG$ERRORS WON'T COMPILE ON 9I DATABASE
2148774 - ENABLED PROPERTY SET YES ON CGSO$..._DO OBJECTS IN OBJECT LIBRARY
2176331 - ERROR WITH ORDER BY CURRENT FIELD
2176348 - GET ERROR IF LAST REPORT PARAMETER IS TYPE DATE
2176364 - CREATE VIEW DEFINITION DOESN'T UPDATE WHERE CLAUSE OF DOMAIN KEY
CONSTRAINT
2185321 - COMPILATION ERRORS ORACLE 9I: DIFFERENCES PARAMETER DEFAULTS PACKAGE
SPEC/BODY
Regards,
Marcel

What is Validator and Deligator in MVC2.0 ?

Hi All,
Anybody please tell me what is validator and deligator in MVC2.0 ?
Please explain...
Thanks
Please reply soon.
Thanks
Harish pathak

Hello,
SMOD is for SAP delivered Enhancement
CMOD is for Customized Enhancement
You can use SMOD -> Enhancement RSR00002 -> EXIT_SAPMRSRU_001 for Virtual Char and Keyfigures.
You can also use the BAdI RSR_OLAP_BADI for Virtual Char and keyfigures.
See this document for [BW Enhancements|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5]
[Difference of CMOD and SMOD|http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm]
[How to implement Virtual Characteristics or Virtual key figures |How to implement Virtual Characteristics or Virtual key figures;
See this document as well
[Virtual Char and Keyfigures|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20use%20variable%20time%20references%20in%20currency%20conversion]
[HOWTOIDENTIFYCOMPRESULTS|https://websmp106.sap-ag.de/~sapdownload/011000358700009299362001E/HOWTOIDENTIFYCOMPRESULTS.DOC ]
Thanks
Chandran
Edited by: Chandran Ganesan on Mar 4, 2008 12:26 PM

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?

Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?
This happens a lot regardless of the web page. I continually have to restart FF and it persists still

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

The URL is not valid and cannot be loaded

seems like maybe firefox mishandles untrusted certificates?
It gives error: Alert The URL is not valid and cannot be loaded.
example:
https://notes.corp.cat.com/
other browsers can load this URL just fine. When I visit it in Firefox, I get the error in a simple little message box with a yellow triangle exclamation point, titled "Alert".
ALSO.... when I click the "Home" button in firefox, I get the error, and the home page does not load. Currently the home page is set to "Mozilla Firefox Start Page."
changing the home page to: http://www.google.com/ allows the home page button to work normally.
restoring the home page to default brings the error behavior back when clicking the home button.
changing the home page to: https://notes.corp.cat.com/ produces the same error, just like when I manually type in an https URL with a funky security certificate.
This problem only seems to happen on secure URLs with untrusted certificates, i.e. sites that are too cheap to pay to have their certificate registered with one of the certificate vendors or however the hell that works, so as a result every time you visit their web site, your browser starts to whine that it might be a forgery or whatever.
It used to be in Firefox that I could load these pages and just specify that I want to trust the site anyway. Now firefox gives this error that doesn't allow the user to know what is really going on or what the reason for the error is. It is as if the developers decided that users are too stupid to decide if they really want to visit the site or not, so as a result Firefox is just refusing to visit any web sites where the authenticity of the certificate can't be verified? Hey, it's not a bad idea, to be honest. :-) But it's kind of annoying, because here I am, sort of smart enough to know what I'm doing, but I don't have the choice in the matter...
I restarted with all add-ons disabled and that didn't help. I don't have much installled in the way of add-ons anyway. All I have is JAVA quick starter 1.0, and Adobe Acrobat, Java development toolkit, Java platform SE, Microsoft DRM, and Windows Media Player Plug-in Dynamic Link Library. Not even Flash. All the above is disabled now that I rebooted with add-ons disabled, and I still have the issue.
thanks for any help you can provide.

Please [https://bugzilla.mozilla.org/show_bug.cgi?id=713167 see this.] Installing [https://www.microsoft.com/download/en/details.aspx?id=5638 Visual C++ 2005 SP1] or the .Net Framework 3.5 SP1 may help mitigate the issue.

HT204053 i want to change my icloud id on my iPhone, but it won't let me now that i have upgraded. I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is

I want to change my icloud id on my iPhone, but it won't let me now that i have upgraded. I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is valid. I cannnot delete the account because "find my iphone" wants the password linked to this old account. But when i go into the find my iphone app it is using my corect Apple ID. How do i fix this?

If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account. You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/).

Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix.

Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix this. I can not update any of the apps associated with that user name.

Is this itunes on the iPad or on my computer? Thank you for the reply.

Why does my app store account tell me that my payment method does not match my bank's records. my card is valid and works for iTunes but not the app store.

While trying to change my Credit Card info: The app store tells me that my payment method information does not match my bank records and to try again or enter a new payment method. My CC is valid and its the same CC ive had for a while. This CC info works for iTunes but is not being accepted for the App store.I have changed this info online but cannot change it on my iPhone. Can anyone tell me what i need to do?

Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

HT2731 How do I remove an email address that is no longer vaild for the iTunes Store? A really old email address keeps popping up on my iPhone, the email address is not valid and I have no idea what the password was. It's been over two years.

How do I remove an email address that is no longer vaild for the iTunes Store or my iPhone? A really old email address keeps popping up on my iPhone, the email address is not valid and I have no idea what the password was. It's been over two years.

Hello tcnolen1,
It sounds like you are trying to change the Apple ID logged into the iTunes & App Stores on your iPhone. Use these steps:
Changing your Apple ID account
Tap Settings > iTunes & App Stores, then tap the Apple ID signed in.
Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID.
You can find the full article here:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT5312 My rescue email address is no longer valid and I can't remember my security questions answers. How can I reset my security information

I have money in my Itunes account, but have forgotten the answers to my security questions.
The rescue email address that was linked to my account is no longer valid and I can't access it any more.
How do I re-set my security questions and rescue email so I can purchase itemsvia my iTunes account?
Help?

You will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to update your rescue email address for potential future use.

How do I enable Firefox 4 to do a search on more than one word (e.g. "yahoo mail") without receiving the error message "the URL is not valid and cannot be loaded"?

After loading Firefox 4.0, I changed the address bar search engine to Google Search by Name, so I'd be taken straight to the most relevant webpage when I type in a word.
It works fine when I type in one word, but if I use a search with more than one word (e.g. "yahoo mail" or "google maps") I get an alert saying "The URL is not valid and cannot be loaded". Is there any way I can fix the address bar to accept multiple word searches?
I've tried disabling all my add-ons, but it didn't make any difference.

Hi, this should sort out your problem:
1. Type in "about:config" into the address bar, this will open the settings menu. Click on "I'll be careful, I promise!"
2. Search for "keyword.URL" in the filter bar.
3. Enter "http://www.google.com/search?btnI=I%27m+Feeling+Lucky&q=" into the value field.
I'm no expert, but I had the same problem which got on my nerves after being so used to being able to type anything in, and following these steps fixed it.

Validation and Error Message Dialog Box

hi,
I created 2 items DateFrom and DateTo.....when User enter dates into these items I need validate these dates i.e DateTo should be greater than DateFrom
if it is not so,,,,I need to Popup a Error message in Dialog Box.........
and this Error should not terminate the Program.
Thanks in Advanced
regards,
Radhika

Radhika,
You need to attach PPR event to the Date To column. In the event code in controller, you can validate do the validation and accordingly throw error on the page.
Why do you need a pop up(javascript alert) for that?
--Mukul

I have CS2 and I use it almost every day.. Today when I tried to launch it, a prompt came up saying my Activation was no longer valid and it closed automatically. Then when I tried to re-open it, a prompt came up saying "A serious error has occured" Ple

I have CS2 and I use it almost every day.. Today when I tried to launch it, a prompt came up saying my Activation was no longer valid and it closed automatically. Then when I tried to re-open it, a prompt came up saying "A serious error has occured" Please re-install the software... I have no idea where my software is... That was many many years ago? HELP!!

When you go to the download page, you must do two things:
Download this file: PhSp_CS2_English.exe on the download page.
Use the serial number on the download page in order to install your non-activation copy.
Do not use your old CD or serial number. It no longer works.
If you have Windows 7, the advice is to turn off UAC and run the installer as Administrator.
Gene

The certificate is not valid and cannot be used to verify the identity of this website

Question posted in Stack Overflow too: java - How to solve "The certificate is not valid and cannot be used to verify the identity of this website" error? - St…
The question is, How to solve "The certificate is not valid and cannot be used to verify the identity of this website" error?.
Here are the details:
I have a signed applet that has been working fine, until I updated Java to 8u25 (1.8.0_25-b18). Now, the application shows an alert message "Do you want to continue? The connection to this website is untrusted". There is a note in this message too, "The certificate is not valid and cannot be used to verify the identity of this website".
The applet is loaded without problems. But when the user tries to use a specific function of that application, the warning message is displayed.
I've checked the java console when this happens, and this warning message is displayed right after these lines:
security: Obtain certificate collection in SSL Root CA certificate store
security: Invalid certificate from HTTPS server
network: Cache entry not found [url: https://sub.domain.net:9876, version: null]
The application is downloaded from a different domain, say "https://app.domain.net/ .....", so no jars are downloaded from "https://sub.domain.net:9876 ", but the applet connects to "https://sub.domain.net:9876 " to send/receive data.
The applet is signed correctly, and so far, it meets all the security requirements according to Java. This issue seems to happen when the application tries to connect internally with an HTTPS url like https://sub.domain.net:9876. That sites' SSL certificate is valid, issued by GoDaddy and has not expired.
Again, this started to happen after updating my JRE to 8u25. I've tested adding the offending URL to Java security exception list, with no success.
Here are a few screenshot of this problem:
This is the warning message displayed:

For what it's worth we discovered what the issue was. When we installed the new certificates onto our servers we also discovered that you have to install the certificates of all intermediate servers listed in your certificate. This mean that all URLs listed on your certificate, have to have the intermediate certificate for the certificate authority installed. This also includes all the Alt Names of your domains, even if they do not use the applet.

A/R Extractor, Validation, and Enhancement......

Similar Messages

Maybe you are looking for