A "shared' equipment icon identified as only f891cb000000 is appearing in my sidebar and the only info I can generate identifies it as a PC-- my attempts to generate more info results in nothing more than "fetching;" has anyone experienced similar?
A "shared' equipment icon identified as only f891cb000000 is appearing in my sidebar and the only info I can generate identifies it as a PC-- my attempts to generate more info results in nothing more than "fetching;" has anyone experienced similar?
Thanks to the gentlemen, Messrs. Galt & rack0 tack0, for their timely replies. I failed to mention in my original post that there are upwards of 15 Apple appliances in our house-- from Apple TV to 4 Apple iPhones to 4 iPads to 2 MacBook Pros to 2 iMacs to a 2TB Time Capsule-- we're all Apple, all the time. We don't own a PC and that was what was hanging me up. I did confirm, incidentally that we're IP6 (although, honestly, that technical jargon didn't mean a lot to me-- hey, I learned something [sorta]!). Anyway, after much digging, I've finally determined that what was/is being identified as a PC, is in fact a Canon MX860 Printer serving the "old" 21' iMac-- thankfully, our recently acquired Epson XP-410 serving the "new" 27' iMac is identified as such. And despite the time spent, a few valuable things occurred along the way, including a firmware update related to the Time Capsule... learn by doing, I guess. Thanks again.
Similar Messages
-
I can send text messages within Australia without difficulty but many of my international texts are not delivered. Has anyone had similiar problems.
SMS text messages are handled by your cellular carrier.
Check with them. -
Has anyone experienced wrist pain with new mac computer...? if so what are suggestions other than warm up and cool down exercises..**
Very good advice but no one is asking for medical advice.... Was wondering if anyone had any ergonomic suggestions that may have worked for them.. ??
-
Has anyone experienced regular adjustments to the sound and brightness done by the laptop itself?
I have a 2010 MacBook Pro i7, 15" notebook. Without adjustments by myself, I find the sound and brightness seem to regress to the lower levels. Has anyone experienced this and what have you done to fix it?
Well, well, well... Nothing has changed. Somehow or another Adobe has managed to truly take control of Windows 7.
I updated Bridge or more correctly... The Cloud did and every files extension in Bridge had 'none' as the application. Lovely stuff. Now All I want to know is why did Adobe take control of Windows file manager and cause this much grief?
I almost never use the clunky and often impossible to manage Bridge. Simple freeware... Irfanview is way more elegant than Bridge and 10 times more useful IMO.
Well thanks for the heads up Curt. I never considered the full implication of giving Adobe the freedom to add and remove whatever they wanted to... Forget the don't fix what isnt broken thing... Just pour everything we've got in the cloud onto all the members PCs, eh? Hard drives are cheap and hey, what are forums for when things go wrong if it isn't to keep Adobe informed of bugs they can silently fix and pour 'em back into the cloud as fixes.
Ha,ha you just gotta love progress eh?
This is really going to take on. I can see it now... For every mess up of a PC -- "THE CLOUD DID IT"!!! -
Has anyone experienced there computer freezing up when useing Photoshop CS4 or SC5
My two computers both freeze up when I am useing Photoshop (working with a large file 82-120 megs with multiple layers, channels and paths) it only ocurred when useing Photoshop. Otherwise the computrs works fine for every day tasks for buseniss and personal use, admittedly, I do not have any other resource intnsive applications other then QuickBooks or maybe a large Excel spreadsheet but I have no problem with these large files. I am not a gamer or I could try a game I hear that they can be resorce intensive.
My first computer is used for personal and business. this computer has a number of programs on it, including Kaspersky internet security but it is not lacking in resorces, It is a Intel based computer, sporting Intel quad core 2.5 GHz CPU. running on a 32 bit Windows 7 operating system, its list of components are 4 gig ram, Nvidia Geforce 9600 GT graphics card (on the Adobe approval list sporting open GL) 4 sata hard drives, 750 watt power supply, Asus P5N-D SLI motherboard, the tower case has 7 fans and the CPU is water cooled.
I run Photoshop CS4 on this unit.
after I experienced this loss of critical files I call the tech support line to see if they could help with recovery of the file and to ask if they had a way to prevent this from occuring again.
They said that I could wave bye bye to the file and the work, additionaly they said if I was working with large files like that, I should be runing a 64 bit system that could utilize additional memory.
I really like working with the large files so I bit the bullet and spent the money for the 2nd computer that I would use as a dedicated Photoshop workstation.
the second system has many of the same components because they have worked admirably. the key difference is as followes. 8gig ram, 64 bit Windows 7 operating system, Photoshop CS5 and the only other software is the drivers for the wacom intos4 tablet. I desided not to install any type of antivirus program because I will not be useing it on the internet except when it needs to connect to Adobe for whatever. my decision not to install antivirus can be reversed but I did not want any questions about it slowing up the computer.
This system with Photoshop CS5, freezes up faster then the CS4 system.
When I say Freezes up what I am referring to is the mouse and keyboard will not respond. Control/alt/delete will not bring up the task manager. Eventually I give up and have to force a shut down by pushing and holding the case start button for about 5 to 8 seconds.
when I restart the system I check the file that I have been working and several times the file that I was working on is corrupted beyond Photoshops ability to open.
I have used the windows 7, on board, memory diagnostics and it claims that all of the memory is fine I have reviewed the event logs and the only critacal errors are about the system being improperly shuting down. I even went to the trouble to click on the link for each error that will take you to Microsofts website and will serch for anything they have about that event and they had no help on the event.
People with mac computers have had a similar problem that had to do with there fonts and plugins, but I do not have a mac and I have not installed any plugins. The CS5 is as it came from the factory and the Mac people kicked me out telling me to get over on my side of the street where the rest of the windows outcast are but that was only after they thought they had there problen solved. Its so funny, but losing these files is not, Please HelpThanks everyone for jumping in with both feet.
Let me review what I have already done.
(1). I have already witnessed how the wround driver for the tablet will wrack havoc. when I first started the 64 bit version of CS5 it would not recognize any PSD files at all and if you went to the file and right clicked looking for the (open with) dialog box forget-about-it the option for Photoshop was not an option.
I called Adobe tech support and they told me that I was not going to be able to use the Wacom tablet with the 64 bit versionof Photoshop. I found that a little suspicious seeing how Wacom tablets are the most preferred pen tablets for professional illustrators.
I contacted Wacom and they explained that I needed to uninstall the Wacom tablet, reboot the computer, go to the website, download the new 64 bit drivers and then reinstall the tablet. after I did that. Photoshop found all of my files and opened just fine.It was only then that I found out about the freezing proplem with the 64 Bit version.
A number of the helpful people here have tried to advise this to me but I have already be down tha road.
(2). I have the latest drivers for the BFG Nvidia Geforce 9600 Gt, released in April of this year and I had already new that the were necessary for the open GL so this is one of the first things that I tried.
Some one from our cousin Mac's side of the famaly and (Noel just suggested) that I try turning off the open GL. As soon as cousin Mac asked us to try this I did it (Them being famaly and all).
I was able to give it a try on the 32 bit system on Thursday 7/8/2010.
I was able to work on a very large file with a multitude of layers, channels and paths for about 5 hours before if froze. after the reboot I found that the file was fine and retained everything up to my last save.
But this test is only good as circumstantial evidence because the freezes are somwhat random. They mosly happen after I have been working with a large file for quite some time but some times it can happen very quickly, maybe 25 or 30 minutes.
Bye the way I really enjoy the humor, the Mac people are very serious people.
the Mac users are just grouchy because they expect their computers to "just work", and of course they don't.
We PC users have been given no such expecatations. THANKS NOEL
Oh, don't worry about them mean old grumpy PC wanna be Mac peoples. Gota luv it THANKS dec9
and Eight thousand dollar papper weight says it all. THANKS $8000paperweight.
(3) the memory, CPU and mother board can not be ruled out completly, just yet
As for the memory I have used the on board windows 7 diagnostics and it passed. but this is a unreliable test for hevy-resource dependent applications and a load or stress test would need to be done to be confidend.
I have a number of computers with the same kind of ram but after swaping them around I can not say that I have had any lasting results and it is compecated by experiences like what happened to me after turning off the open GL. What if I had of only worked for 4 hours? I would of thought that the problem was solved thats what would of happened
Do any of you work with files like I have been talking about? and if so do you experience any problems?
The motherboard can not be rulled out by any tests that I know of other then process of elimination which is at the heart of all sound diagnostics.
I downloaded a utility that is helpful called (Cupid Z) that gives real time monitoring and idenification of components.All the voltages seem fine.A.
I hope I will be able to up load the screen shots so you all can have a look see.
The CPH is more than likely not the problem.
I do have the option to install Photoshop on a third computer that has most of the same components but has a different Intel CPU. this would rull out any compatability issues (CPU with the Board) but if that were the case I dought that every other progrem under the sun works fine except Photoshop.
dec9, I did delete the prefs on the 32bit system but I have not had time to test the operation of Photoshop as of yet.
Lastly I will try to upload the screen shots of (Cupid Z) you will see that the latencys and the frequency are correct. Under the SPDscreen the plausible timinigs for verious common frequencies are given,, all seem to be with in range. The lantency are inside the spec.given by Corsair;s website
Asus provides a utility that allows you to monitor Temptures and voltages and I hope to send you a screen shot of this and you can see that they all are correct.
I would like to send the event log but I am not sure how to do that if someone could give me the 411 on how to do this I will send them to you I have saved the errors in several file formats but I cant see how you cold read them on this little page Thanks again POBOX119 signing off -
Has anyone experienced the iphone 4s camera panorama failure where the panorama stops after taking only one 'non panoramic shot? I think this happens when you switch direction of the panoramic arrow.
Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host> -
I cannot access my Hotmail account with Safari on my MacBookAir but I can access it on my Mac/Safari and also from my PCs. Has anyone experienced the same? Does anyone know a fix for this?
To find out if it's system wide or user specific, try this...
Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account? -
I am getting a complete shutdown (crash) of Labview 8.2 when placing the wiring tool over a cluster that is filled with task and object references. The crash occurs on all computers I have attempted it on and happens throughout all VIs in all classes that distribute multiple references throughout the VI using a cluster. The entire project I am developing is programmed in GOOP. Has anyone experienced anything like this? I have provided a screen shot of the place where the crash is generated. Let me know if anyone has any insights.
B
Attachments:
LV screenshot.JPG 156 KBThere are several known crashes with LVClasses. One of the easiest
fixes is to load your application into memory and then hit
ctrl+shift+click on the Run arrow of your top-level VI. Then do
File>>Save All. You might also try selecting that wire (with the
selection tool -- use the Tools Palette to explicitly select a tool
other than wiring) and deleting it and then rewiring those terminals. -
I have an iPhone 5 and email that is being deleted from trash is reappearing in trash a few minutes later. Has anyone experienced this problem? Any suggestions as to how to correct it?
Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Also, go to Settings>General>Usage>Manage Storage and see what is using the storage -
My ipod Nano generation 7 shuts down unexpectedly while using the NIKE app, has anyone experienced this problem?
This is not a problem I have only had with 7th gen. iPod. I have had this problem with the 5th gen. It goes back a few years. Nike and Apple are aware of this. Nothing has been done. It appears that when the iPod voice commences (whether to update you on the status of your run) and you touch a button to prompt a mileage update or song change yourself (or even brush the device wrong when taking off a jacket), the operating system overloads and cannot sort it out. It then shuts down and reboots. Your mileage is lost. So sorry. Have a nice day.
Love the other aspects of running with a nano (small and light weight). I can keep it high and dry and out of the way. Like the software. Use it almost everyday. Hate the unknown dropped runs. I have logged over 2,000 miles with these devices. Today I lost another 3 miles - probably the 30-40th time it has happened. Frustration is somewhere between time for another device to time for another system - Map My Run indeed!
This probably occurs with my iPod once or twice a month. Went to the Apple Store - three times. The first time was maybe two years ago and they first tried some magic dust and then on the second visit, they swapped out my nano - it was a bit flimsy. The problem returned. I then upgraded. The problem returned. The third time they did a reset and it seemed to help. Then, it returned. But to download an older software version, verify the fidelity of the UBS cable, jump from computer to computer, make a trip to the Apple store, and perform so many two steps on one leg just to get what we paid for seems . . . well, lame. And, Apple told us the thingy would work using all the different computers and software (Vista, Nike, etc. etc.).
Oh, one other thing. The Apple Store told me to complain to Nike. Nike said their software is fine. This is like dealing with General Motors or the government - but, worse. Not my problem man. See the guy over there. Got it.
I note that no one from Apple is jumping in the chain here with a fix. So much for customer exuberance. Generally like Apple. We have about 20 Apple devices in our family (desktops, portables, phones, pods, tablets) and are lining up for the watches . . . but, maybe Apple is an idea who time has come and gone, . . . like the wind. -
Has anyone experienced internet connection problems through Comcast after taking a recent security update download from Apple??
Hello jessie029, and a warm welcome to the forums!
What browser do you connect with?
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then Open System Preferences>Network>Configure>Proxies Tab, make sure none are set, like for HTTP & HTTPS to use at Home, if you use it at 2 locations, just make a New Location for home.
Make a New Location, Using network locations in Mac OS X ...
http://docs.info.apple.com/article.html?artnum=106653
Then try putting these numbers in Network>TCP/IP>DNS Servers for the Interface you're using...
208.67.222.222
208.67.220.220
Then Apply. These are safer/faster than most ISP's DNS numbers, and have been patched against DNS poisoning.
https://www.opendns.com/homenetwork/start/device/apple-osx-tige
How to Flush DNS in Mac OSX using the Terminal.
In Mac OSX versions 10.5.1 and before, the command lookupd -flushcache performs this task:
lookupd -flushcache
Reboot. -
Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?
Welcome to Apple Support Communities
Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691 -
Has anyone experienced the mute switch / auto-rotate switch iOS bug on their ipad?
Has anyone experienced the mute switch / auto-rotate switch iOS bug on their ipad?
I have experienced this on iPad 1 as well as iPad 2.
Basically, when you set the side switch to toggle screen orientation (or mute), after a period of use I will have either my sound cease to function or the ipad screen will not orient correctly. This depends on what i have chosen the side switch to toggle. I am not sure what causes it. The time it takes for the problem to appear is inconsistent. Some say it is caused by third party applications.
One can find numerous threads on here if you search for "sound on my ipad stopped working" or "orientation not working". It appears to be the same problem. Fudging with the toggle switch settings can fix it (but it takes a weird order to get it out of its non functioning loop).
Here is a thread that addresses the sound issue: https://discussions.apple.com/message/15263298#15263298Its only for notifications.. it is not for sound from videos or music!
-
has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image. What's going on? I've noticed this has happened in the past randomly with other clips and it's driving me cray cray! Any help appreciated greatly and thanks in advance for taking the time
In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
MtD -
Has anyone experienced electrical schock, tingling, burning and pain in the fingers, hand and wrist while using the apple mac desktop and the apple pro notebook?? If, so have you found a solution?? Never experienced this with any other computers and I have talked with my Doctor as well as a specialist and have had an EMG test for capatunel and nerve damage both test were negative
I have experienced some mild tingling if I touch the aluminum case on my iMac at the same time that I touch the metal cases on my external hard drives. They are all connected to the same surge suppressor and are on the same circuit, which is definitely properly grounded. I can't explain it, and I just make sure not to touch them at the same time.
I have never had any sensation touching just one of the devices alone. Is that what you are experiencing?
Maybe you are looking for
-
Please Help I don't know what to do I just installed the new iTunes 11.1.4 and when I plug in my iPod touch, it sends me a warning note telling me that the requested software is not installed, to uninstall iTues and install it again with the 64 bit v
-
Error while uploading Excel sheet
Hello Everybody, I haave developed one application in which I am uploading one excel sheet. This code is working fine on my local WAS. But, it is giving me following error on Development server. Application error occurred during request processing.
-
Contact Sheet II setup page is missing layout information.
Where has the layout data gone in the Contact Sheet set up page? Is Photoshop trying to get rid of all useful tools throughout CS6?
-
I have an individual su scription to PS CC. No matter how I try to open it, either via LR5 or as an independent appl, the message is, "Photo Shop Closed Unepectedly." Help. Jim
-
Hi this problem is for my sister who is a new BT customer. She's set all her home hub up etc and the hub is ok as she can use the wireless on her phone and youview box works all ok so no problem there. Its just can't get any connection on her home pc