A simple Question about % in CR Chart!

Hi, I have another simple question.
When i use SQL to storage data and wanna Crystal Report to display the data in chart using %
which data type should i use?
float or string?
and I found when i use 0.12 as 12% in database , It could not display in Crystal Report line chart normally.
What should I do??
Please Help!!!
Thank you VERY MUCH!!!

If you have the datatype as string from your database then try adding the string field as a summary field in chart and select maximum instead of count and if you have them in number format then you can directly select the percentage in chart.
Regards,
Raghavendra

Similar Messages

Simple question about mount and delay script

Hello, I have a simple question about mounting volumes on start up.
My computer wakes up auto - and then auto there are serveral applescript tasks (mount and start up programs)
I use this script (daily) for serveral connections with external volumes I always need the connect to. ( In the script I use this code 3 times for other locations) I do this on start up.
set Uname to "XXX"
set Pword to "XXX"
set someVolume to "afp://XXX.XXX.XXX.XXX/XXX/XXX
mount volume someVolume as user name Uname with password Pword
(same code for 2 other locations)
When i do this on start up sometimes the script says there is no connection possible. I guess it's because on start up the connection isn't there. And 1 minute later when computer is total ready the connection is ok. When I run the script then It works. Just sometimes ( In the morning) 'It' want to connect but the script stops. When i do it manually(I run the script again) it works just fine.
Is it possible that I need a delay? Can someone explain this?
How would I make a delay handler for this script? Is that the best solution?
Thanks in advance. This is something small i'm wondering about.
Colin

BTW, If you saved the script as an application +(and not as an application bundle)+ you could drop the script on to *Drop Script Backgrounder* (freeware).
Then the script would run in the background, so, you wouldn't see it running in the Finder.
<http://www.macupdate.com/info.php/id/7922/drop-script-backgrounder-x>
Tom

A simple question about combo box

Dear All,
Just got a simple question about combo box: I have one of these selectors with labels based on filtered rows from a table.
Is it possible to have one more label that would select all options?
Like:
Product A
Product B
Product C
All Product
Many thanks for your help!
Gilles

Hi Gilles,
The purpose of ComboBox itself to select single option out of many.
For your purpose, you may have to use "List Builder" which can accomodate 1 or more to select.
Please revert for more clarification if you need.
With best wishes
BaaRaa.

A simple question about performance!

Hi! I have a simple question about performance. Suppouse that you have a servlet or a class with DB access, and you need to use a value several times in that page. What is best, to assign the value from say, a resultset or a request.getParameter() to a variable or to call the resultset or the request every time you need to retrieve that value? Which option uses less memory, which is faster, etc.?
Hoping the best fou u
Raul

If you need more values from a db, the best is to open some connections (connection pool) and use the for accessing the db.
To get the data only once, open the connection, get the data, store the data whereever you want: variable (class), hidden control (if you want to send from one page to another by request) and close the connection as quicky as possible.
The advantage of the first method is that the most time consuming activity (connections opening) is done only once.

Simple question about flex and AS 3.0

Hi, this might sound like a simple question so I apologize...
I have both a copy of flex 2 and 3, and i want to simply code in AS
3.0 not mxml. I referred to the help of both flex 2 and 3, and all
i could come up with is "you can add dynamic behavior to your
documents using actionscript", which means to me, you only write
your functions in AS and create instances with mxml (...ugh).
personally, i find mxml to be ugly (mainly because it looks like
html to me), and i'd rather not use it. coming from programming in
an IDE in Java, it seems like it would be nicer to have something
similar, all the while having the power and cool features of flash.
I'm not fully educated in this matter so i understand that i could
be totally wrong.
i mean, if i have to code in mxml, i will. i'm a web
programmer for a living, and if a more experience programmer said
something like "if you don't code mxml in flex, you'll never get a
job coding in flex", i would trust the advice, and learn the ugly
code. :)
yes, i do have Flash cs3, it's great but it seems like a pain
to me the way you organize classes.... i've only seen a few
tutorials, ones that explain how you cannot simply import a custom
class, you have tell your movie to link to it, put it in the same
directory, or manually name the package, it's sort of confusing.
my main point here is that i'm very eager to start building
apps in straight AS 3.0 instead of using flash cs3 (for some
projects), and it would be cool to get some help or be pointed in
the right direction.
to simplify:
can i write AS 3.0 and only as 3.0 in flex 2 or 3? how? can
you link me to a tutorial? any advise?
thanks!

Hey William, thanks for the post. It's a great coincidence
because I'm reading that book as well. I'm about half way through
it, and I love it. I installed mxmlc on my linux box and am writing
pure AS 3 apps. I think that's the way to go, though I know it's
not for everybody.
My problem with mxml is that it has a weird syntax for
function calls, and it's not as 'intuitive' for a person like me,
who came from C++ and Java programming in the past. I like writing
programs in the C++ and Java style syntax, and since so many other
languages use a similar syntax, I don't see any reason to learn the
nuances of mxml, unless I was getting paid to do it. As far as I
can tell there is no benefit.
I hate using Flash to write flash apps as well, I feel like
they become messy and confusing, especially when trying to write an
OOP application. I only use it if I want to move an object in a
very specific way and can't do it with the Tween methods.

Simple question about generate proxy

Hi guys...
This is a simple but a truly simple question....
When trying to create a proxy from our messages interfaces using SPROXY, i'm not able to get the Software component versions that were used from the sld...
Do I have to export them? Or import them?

Hi Goncalo,
Check if it helps...
Re: SW component version not visible in SPROXY
Regards
Anand

Simple question about JAVA path

Hi. I have a simple question , but I spent several hours trying to find an answer.
How do I know the location of the java executable which is used by Concurrent Manager.
I already know that running which java under application user will not give me the correct answer

Maybe you can try like this:
     public String getPath(){
          Class cls=getClass();
          String className=cls.getName();
          String packageName=cls.getPackage().getName();
          System.out.println(className);
          System.out.println(packageName);
          String newClassName=className.replaceAll("\\.", "/");
          String resouceName=newClassName+".class";
          System.out.println(resouceName);
          URL url;
          url=cls.getClassLoader().getResource(resouceName);
          String path="";
          path=url.getFile();
          return path;
     }

A very simple question about WF

hi experts
I would like to ask a question about workflow
as u may know there is 'Loop' step in workflow, but I am confused when should I use Loop?
Is this step used for processing internal table? if yes, why shouldn't I create a custom BOR method and pass the entire internal table to the method?
many thanks

hi
loop step for not process the internal table,
this is used to process the some steps repetely until condition True or False.
we have two loop steps is there
WHILE AND UNTIL.
Thanks
sitaram

Simple question about telnet and characters

Hi all,
We've installed for the first time a SUN machine. So i think it's for a SUN expert a very simple question.
Normally when i type a special character it will be dispayed like " � " [alt+132]
But when i use a telnet session and i type "alt+132" i get a "d" and not "�".
Does someone know where i must start to find out how this works ?
Thanks you very much.
ESP

This is probably related to the locale your server is in. I don't remember the default locale a box is installed in if you don't specify. I think its "C". I use the UTF-8 or en_US.ISO8859-1 locales at home. At work, usually C but sometimes applications may require UTF-8. BEA Weblogic required this for a project a while back. This is defined in /etc/init/tz.

Maybe a simple question about M2T ?

Hi
I record in HDV on the JVC GY 101.
I store on the Focus Enhancements DR HD100 Hard disk recorder.
The footage I have is in HDV 25frames Progressive.
The hard disk stores as m2t file and I seem to need to use Mpeg streamclip to convert for Final Cut Pro HD.
I have a few questions about this.
1) What should i convert to with mpeg streamclip ? mov, dv m2v etc etc
2) What setting should I have on FCP with regards to screen size ? The converted clips are 1280x720. When I choose this setting on the sequence, I end up with small black bars left and right of the video on the canvas ???
3) I will also later have to add some digi beta footage which will be PAL, 720x576 Anamorphic.
4) What is the best resolution for me here ?
5) And will the quality of the original m2t file be downgraded by the mpeg streamclip ?
Thanks so much for your help
All the best
Simon

HDV isn't an "edit-friendly" format, meaning: HDV uses inter-frame compression, combined with a long group-of-pictures (GOP) of 15 frames (12 frames in PAL-equivalent). In intra-frame compression (as in DV, DVCPRO HD, etc.), each video frame is a complete image that stands alone. Inter-frame compression (which is also used in DVDs) uses only a limited number of complete image frames, the GOP determines that number. So, in HDV for example, with a GOP of 15 frames, 1 second of 30fps video contains only 2 complete frames, while the other 28 frames are determined by calculations used in conjunction with the Bi-directional ('B') and Predicted ('P') frames, which contain partial information on the changes in the video in between the 'I' frames which contain whole images. This process, of course, requires much more computer processing power than when editing DV, DVCPRO HD, Uncompressed, etc.
Editing video streams such as HDV (and XDCAM HD) is made difficult by the reduced number of I-frames. For example, if you make a cut in between the I-frames in the video clip, the computer has to then recalculate new I-frames that are placed at both sides of the cut. Converting on capture/after import to an intra-frame codec like DVCPRO HD, ProRes 422, or Uncompressed will reduce processing power and increase real-time performance, as well as give better performance when adding effects and performing compositing like chroma-keying.
A common rule of thumb in professional applications is to acquire in HDV, XDCAM HD, etc., but capture and edit in DVCPRO HD, ProRes 422, or even Uncompressed. Native HDV editing is not taboo by any means; it's just not as easy or robust -- especially with the LONG render times. Depending on what kind of work you do (and of course personal preference), you may not see much benefit by transcoding to another format.
Are you suggesting i have to convert each clip after capture?
Unless you have an HDV deck with HD-SDI and a capture card, you would have to convert each clip. Batch-conversion would be very useful for that.
Hope that helps.
tim

A simple question about DAQ data sampling

Hi all:
Now I meet a very basic question about DAQ sampling. I am using NI PCI-6040E DAQ card, SCXI-1001 chasis, SCXI-1102, SCXI1300 terminal block, and SCXI1160 relay module.
I am not sure , is it possible if I want to test a voltage (1 volt) on a resistor. Now I am connecting the Ch0+ to resistor+ (24 volt), and connecting Ch0- to resistor-(23 volt). So the voltage between resistor+ and resistor- should be 1volt. Actually, It is working at the first, but after I want to test 9 channels based on this connection. The Measurement & Automation can't read data from the DAQ card. (when I test it by multimeter, I can get the voltage data on the Ch0+ and Ch0- of SCXI1300 terminal block).
That's strange, does anybody know what' s wrong about it?/
Thanks a lot

Hi hanwei,
According to the specifications of the PCI 6040E (page 3), the input signal and common mode voltage should never exceed 11V from ground. I believe this is the reason you are able to measure the potential of a battery but not the 24V signal (even though the differential value is only 1V).
Best Regards
Hani R.
Applications Engineer
National Instruments

Just simple question about java HTTP session mechanism...

I have one simple question regarding the java HTTP Session Mechanism.
1) Is there another alternative for the HTTP Session ? If have, what the alternative?
2) I have been acknowledge that HTTP session is same as cookie system and others say have many different, where is the different..
thanks

1) You can always do your own session handling. But why bother when there is one there for you?
2) The issue with sessions is how to identify the user from the request. Each session gets given a session id. The user has to send that session id with every request they make.
The standard way is to use a session cookie, which only lasts as long as the browser session. The cookie with the JSESSIONID is sent with every request, thus the server can identify which session a user is in from their cookie.
Of course you cannot assume that the browser will support cookies, so you need to encode all URLs with the method response.encodeURL(). That method puts the session id into the URL if the browser does not support cookies, or they have them switched off.

Simple Questions about ESB and ftp adapter.

We have the following Business Scenario:
We have a partner company that provide us a ftp server with some files. We need to transfer these files from this server to other server, we don't need to read the file's content, we just need transfer the files.
We are planning to use ESB in order to implement this solution but we have the following questions:
Is it possible use the ftp adapter in order to transfer the files?
Is there any example available about (Schema is Opaque feature) on a ftp adapter?
Thanks
Ramiro Ortiz

Thank you very much for your reply.
. I am trying to construct a FTP ( get) adapter with which I would like to do a simple FTP transfer from /var/out directory server xxx.oms.com (say) to a directory /home/in on the server bos1.oms.com (say) could not figure out this in jdeveloper 10.1.3.3 ( do i need upgraded jdeveloper?). The esb server and control exists on server bos1.oms.com. While constructing the adapter in jdeveloper it asks for physical directory? Is this the directory where it will the read the file from? How do I specify if the directory exists on the different server.
is it something like xxx.oms.com:/var/out
Please let me know.

Simple question about custom tags really easy!!

I am trying to make my own custom tags, so far i have created simple one that have i use for heading or to set the page layout for a jsp page, My question is I want to make a custom tag with a body , with a start and end tag can anybody give a simple example of a custom tag which has a body.
I do not mean write me a tag i mean what could a tag with a body be used for? Can you give me some example of what a tag of this kind could do?

Thanks having read that and some other pages i have another question:
would it be possible to put the following code into a custom tag so that i can pass in a list and have it output it to a table?
<TABLE >
<%
out.println("<TABLE >\n" +
                "<TR BGCOLOR=\"#FFDDAA\">\n" +
                " <TH>ID Number\n" +
                " <TH>Artist\n"
Iterator it = pricePassed.getpricePassed().iterator();
while( it.hasNext() ){
   MySite.VideoBean vids = (MySite.VideoBean) it.next();
   out.println( "<TR>\n" +
               "<TD><Center><B>" + vids.getRecId() + "</TD>" +
                "<TD><Center><B>" + vids.getArtist() + "</TD>"
</TD></TR>\n" );
%></TABLE>At the moment i use the above in a jsp to put data into a table, would it be a massive task to undertake to put into a custom tag?

A simple question about Drag and Relate navigation

Dear experts
I have found SAP help or related manuals only good at talking difficult things such as how to customise the drag and relate targets, etc. However, after I followed exactly and then how to test.
Then I just see pieces of information, very unstructured. Spending me a whole day, even I can't get a good simple example on how to really perform a drag and relate at least for the proof of concept at EP 6.0. It spent a lot of time in describing what the navgiation panels about, what drag and relate targets. Then how to do it in once transversal. That is, with all customisation, how to drag and relate an object.
My step is with iview A, shows a purchase order details showing a drag and relate enabled object like vendor no.
Then I try to drag this vendor no. to a display vendor iview, iview B.
I have known I have to put iview A and iview B to a Drag-and-relate targets. I am sure I have done this. Does it mean opening the portal, I will see both iview A and iview B appearing at the same time in the drag-and-relate target area? However, in my case, it is not, iview A only appears in that area when I load it once, same to view B. When I load iview B, iview A links from D&R target will be wiped off. Then how I can drag an item from iview A to B while each one of them can only appear at any time.
Can anyone give me a simple guide (don't give me an internet link from help.com) I have been tired of this.
First, I would to make sure if my so called self-learnt drag-and-relate simple action is correct in the steps or really I have made something wrong in the customisation or even a bug there.
Can anyone on the planet have this experience, pls. act as my teacher in this area?
Rgds
Stephen

Thanks
I have tried the 1st way already. But I can see both iviews existing in the D & R targets. Now I try to drag an item with business object BUS2002 from iview A to relate to LFA1 of iview B of the same back end system.
But iview B shown up with that data of LFA1 shown up (in my case the vendor no.)
I have used autocomplete relationship and I have checked it has been well-defined already. Also check from metadata at backend they are both active.
Do you have any clues to the pitfall in my case?
Rgds

A simple Question about % in CR Chart!

Similar Messages

Maybe you are looking for