A simple question about the Integration process and the PI system

Hi all
Out PI system gets more and more slowly .
in the Monitor I can se that there are many ufinished IP about 100.
in the Outbound colon there is a Watch icon with the message
QMessage being sent                     
and in the graphic of the IP thers is a Send Message Asynchronously  with text in process.
my question is can those unfineshed IP be guilty in slowing down the system by taking resources, they have been there for quit a long time .
Thanks

Hi again
I have checked sm12 , no locks
theres is no mapping involved in this step , the IP is trying to send a file to  server.
I just want to know if  100 unfinished IP slow down the system .
It does not matter if the file has been sent or not
is there any way to check those IP if they are taking resources.
Thanks.

Similar Messages

  • You purchase properties in Arab game (Sultan desert), while the procurement process and the discount amount lost contact wrote the running game has been cooperation from them but the problem!  I can't buy any properties in the game itself and the science

    You purchase properties in Arab game (Sultan desert), while the procurement process and the discount amount lost contact wrote the running game has been cooperation from them but the problem! 
    I can't buy any properties in the game itself and the science I don't use jailbreak and two free jailbreak is there a program hindered the procurement process so that I can buy anything from the store

    Hello milkisoo,
    Wow! Purchasing a new computer and monitor should be a fun and exciting experience, and instead, it sounds like it’s turned into a complete nightmare. I can only imagine your disappointment when you found two charges relating to its purchase on your debit card account, and I’m sorry for any aggravation this caused. 
    As I want to provide you some piece of mind, I pulled up your order number using your email address attached to the forum. After review of its payment information, I found we collected only one payment.  However, when orders are first placed on BestBuy.com, a pending authorization should show up on your bank card to make sure funds are available for the order until it is fulfilled. From there, the authorization should drop off and the collection charge should appear.  This is the case for your one charge of $1,051.69.
    It also sounds like an error may have occurred when you initially attempted to place your order,  resulting in one of your gift cards not registering properly and the order not being completed.  Your card’s issuing bank doesn’t appear to have recognized this and pushed through the pending authorization. This occurred a second time when your account information didn’t quite match up with what we had on file. Please know that we haven’t ordered a collection of these funds and your issuing bank should release the two pending authorizations within 5 to 7 business days.
    Thank you for posting.
    Alex|Social Media Specialist | Best Buy® Corporate
     Private Message

  • A question about CPS (CPS processing) and CAPolicy.inf file.

    Hello All
    Can someone please help me with the following question.
    Background, I am building a 3-tier PKI infrastructure. offline Root, offline Policy (intermediate), online issuing.
    Now my first question is about CPS (certificate practice statement) for this example lets just call this the InternalIssuancePolicy as below.
    Basically I was thinking it is best not to set a given certificate (aka issuance) policy at the Root, the reason being I may wish to have different issuance policies at a latter date.
    For example right now I just want an issuance policy (CPS) for internal certificates only, therefore I am thinking set this at the Policy CA level, as below [InternalIssuancePolicy] (example OID) and then issuing CA certs from this Policy CA to the
    internal issuing CAs. If at a latter date I want a different policy (CPS) for issuance of external certificates I can build a new Policy CA under the existing Root with a different policy extension.
    Is the above logic sound?
    Questions:
    I am assuming from recent study that the CA cert issued to the Issuing CA will contain a single issuance policy "only" i.e. the one that was specified in the Policy CA 1.3.6.1.4.11111111.1.1.1.  If so I believe you cannot build a new
    issuing CA and submit the CSR to the Policy CA asking for a CA cert with any other certificate policy extension other than 1.3.6.1.4.11111111.1.1.1
    Is that correct?
    Also
    I saw a blog post which stated if are going to use certificate/issuance policies (other than all issuance policies) you should mark the extension as critical=true otherwise the policy just becomes glorified comment. I take the point but that leads me to
    two more questions
    1: How does the certificate changing engine or CryptoAPI enforce a certificate policy (as it is just a policy, e.g. written procedure). I am assuming all this means is it forces the client to process the extension and therefore check the certificate
    policy extension in the certificate does not violate the certificate chain but that is all it can do?
    2: If the certificate policy extension is set to critical and the URL referenced in the extension is not available (e.g. on a WEB Server and the client is working offline, but has a cached CRL), does setting the extension to critical also force the
    client to try and access the URL listed, or not (I am assuming not as you could just have a text block rather than URL).
    Any comments suggestions on my proposed three CAPolicy.inf files below for the 3-tier PKI (again offline Root and Policy)
    ** Root **
    [Version]
    Signature= "$Windows NT$"
    [Certsrv_Server]
    RenewalKeyLength=4096
    RenewalValidityPeriodUnits=Years
    RenewalValidityPeriod=20
    CRLPeriod=Years
    CRLPeriodUnits=1
    LoadDefaultTemplates=False
    AlternateSignatureAlgorithm=0
    [CRLDistributionPoint]
    [AuthorityInformationAccess]
    basicconstraintsextension]
    pathlength = 2
    critical=true
    PolicyStatementExtension]
    Policies = AllIssuancePolicy
    Critical = FALSE
    [AllIssuancePolicy]
    OID = 2.5.29.32.0
    ** Policy CA **
    [Version]
    Signature= "$Windows NT$"
    [Certsrv_Server]
    RenewalKeyLength=2048
    RenewalValidityPeriodUnits=Years
    RenewalValidityPeriod=10
    CRLPeriod=Years
    CRLPeriodUnits=1
    [PolicyStatementExtension]
    Policies = InternalIssuancePolicy
    Critical = False
    [InternalIssuancePolicy]
    OID = 1.3.6.1.4.11111111.1.1.1
    Notice = "Internal Certificate Policy"
    URL="http://pki.lab.local/Certenroll/CPS.txt"
    [AuthorityInformationAccess]
    URL=http://pki.lab.local/Certenroll/PolicyCA01.crt
    [CRLDistributionPoint]
    URL=http://pki.lab.local/Certenroll/PolicyCA01.crl
    [basicconstraintsextension]
    pathlength = 1
    critical=true
    ** Issuing CA **
    [Version]
    Signature= "$Windows NT$"
    [Certsrv_Server]
    RenewalKeyLength=2048
    RenewalValidityPeriodUnits=Years
    RenewalValidityPeriod=5
    CRLPeriod=Weeks
    CRLPeriodUnits=1
    CRLDeltaPeriod=Days
    CRLDeltaPeriodUnits=1
    LoadDefaultTemplates=False
    AlternateSignatureAlgorithm=0
    [AuthorityInformationAccess]
    URL=http://pki.lab.local/Certenroll/IssuingCA01.crt
    [CRLDistributionPoint]
    URL=http://pki.lab.local/Certenroll/IssuingCA01.crl
    [basicconstraintsextension]
    pathlength = 0
    critical=true
    Thanks All
    AAnotherUser__

    > Is the above logic sound?
    not that much. In this case 3-tier PKI could be reduced to 2-tier. Make default Offline Root CA and below it issuing CAs with desired policy OIDs. You will combine issuing CA with policy CA functionality. Additional tier will cost you a license, administration
    overhead and increased certificate chain processing delays. There is nothing wrong if you combine policy CAs with issuing.
    > I saw a blog post which stated if are going to use certificate/issuance policies (other than all issuance policies) you should mark the extension as critical=true
    where did you get this? Certificate policies should not be marked critical. Certificate chaining engine will take care of it, when application reqests CCE to validate desired policy.
    > does setting the extension to critical also force the client to try and access the URL listed
    no. Certificate chaining engine do not inspect policy qualifier URLs.
    > Any comments suggestions on my proposed three CAPolicy.inf files below for the 3-tier PKI (again offline Root and Policy)
    [CRLDistributionPoint]
    [AuthorityInformationAccess]
    [PolicyStatementExtension]
    Policies = AllIssuancePolicy
    Critical = FALSE
    [AllIssuancePolicy]
    OID = 2.5.29.32.0
    these sections are not required in root CA.
    [AuthorityInformationAccess]
    URL=http://pki.lab.local/Certenroll/PolicyCA01.crt
    [CRLDistributionPoint]
    URL=http://pki.lab.local/Certenroll/PolicyCA01.crl
    [basicconstraintsextension]
    pathlength = 1
    critical=true
    These sections are not required at policy CA. Afaik, CDP and AIA extensions are not supported in non-root CA configuration files. The same is with issuing CA. And your issuing CA is missing PolicyStatementExtension section.
    Vadims Podāns, aka PowerShell CryptoGuy
    My weblog: en-us.sysadmins.lv
    PowerShell PKI Module: pspki.codeplex.com
    PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
    Check out new: SSL Certificate Verifier
    Check out new:
    PowerShell File Checksum Integrity Verifier tool.

  • Question about SAP + SLES10 + vSphere and the truth about memory

    Hi,
    we are using vSphere and SLES 10 for a SolutionManager 7.0 on MaxDB 7.6.
    The system is configured with 2 GB RAM in the VM. The database is configured to use 125000 pages as cache (100000 KB).
    Yes, I know the system is configured very small for this usage, but it is a demo system...
    But the system is really slow. I can't figure out whats the problem.
    The RAM is configured with 2 GB in the VM a "free" in linux shows me that there is 500 MB used for file system chache
                 total       used       free     shared    buffers     cached
    Mem:       2076908    2002704      74204          0      28936     578212
    -/+ buffers/cache:    1395556     681352
    Swap:      6185016    3037744    3147272
    so this shoud be ok, for me it is close to the limit...
    But VMware infrastruture client shows me, that there are only 300 MB of the 2GB is used ... but the database should use 1 GB and SAP should use some RAM , too.
    So who tells the truth? Where does the RAM goes to if it is not used in VMware? Could this be the performance problem?
    An other problem is, that the show dev_io of the database shows me very slow access to the files ...
    i.e.
    I/O via Device Processes:
      UNIX Devspace                                                Read    avg_read      Write  avg_write
       tid name                                                           count       time            count       time
    28596 /sapdata/SYS/sapdata/DISKD01       6532     0.0294        101     0.2077
    But VMWare shows that there is nearly no usage of DISK ... average is shown as 150 KBps...
    So again, who tells the truth?
    What else could be the problem?
    Thank you.
    Best regards
    Christian

    > I know 2 GB is less, but the system is still 32 bit Linux, so 6 GB is "impossible".
    Why that? The 32bit limit is a per process limit, not a limit for the amount of total supported memory.
    > During the long weekend the system is switched to an other VMServer I am going to request more RAM. What a pitty that 32 bit does not support more than 3 GB....
    I don't know who told you that but it's wrong
    > But there is still the question whats correct? The linux variant of free or the VMware infrastructure client monitoring the RAM?
    > What could slow down the Database IO performance?
    > USE_OPEN_DIRECT we are already using ...
    Are you sure it's the I/O peformance? A couple of questions arise then:
    - What filesystem is underneath?
    - How are your data files distributed?
    - What are your I/O times for a single I/O (you can switch that on using DB50 - TAsk manager - and press on the "clock", the time will then be displayed in the database analyzer.
    If you use VMWare on a recent processor you can also switch nicely to a 64bit Linux.
    Markus

  • Simple Question About Using "Group by" Inside the Oracle XE Query Builder

    Hi,
    I am a new user of Oracle 10g XE and I have built and populated some tables. I am trying to create a view (make a query) via using the Query Builder. I have chosen two attributes, say course_section_ID and trainer_ID in the same table. I choose the "COUNT" function for course_section_no and I check the box for "Group By" with trainer_ID. (I would like to count the number course sections each trainer is teaching). Then I "run" the query and the same error message appears:
    fail to parse SQL query:
    ORA-00904: "COURSE_SECTION"."TRAINER_ID": invalid identifier
    Both attribute names should be valid (as shown above).
    If I only choose course_section_ID and do a COUNT on it, it gives the same error message on course_section_no.
    I did try to do the same thing with the demo HR database. There were no problems with counting a field nor with grouping on a field with HR.
    PLEASE HELP!
    Thanks.

    I have got it. When all the attribute names are in the uppercase, then I can do aggregate functions and "group by" with the GUI.

  • A general question about JPGs, color profiles and the web.

    (Didn't get much help in the PS forum, so I'm gonna try this here.)
    I save a website background image  in Photoshop with its color profile (in this instance, Adobe RGB 1998).
    When I view the image in IE  (latest), it looks the same as it did in PS.
    When I view it in Firefox  (latest), it comes out darker.
    I'm guessing this has something to do with  one of the two browsers taking the color profile into account, and the  other not.
    What  is everyone's solution to this problem? Should I not be including color  profiles with my JPGs? And if that isn't the problem (ie, I should keep  doing it), which is the color profile I should be using in RGB?
    I keep  hopping between Adobe RGB (1998) and sRGB 2.1 and can't decide which one  to adopt once and for all.
    Thanks.

    You are correct. The colors differ from IE to FF because FF and Safari use the color profiles found in your images.
    You might like the discussion found on Usability Post: http://www.usabilitypost.com/2008/07/30/photoshop-color-profiles-for-web-images/
    I've been using sRGB 2.1 for a few years and have had no major issues with it.

  • Question about labview under linux and the using of CIN....

    i have a problem with making Code Interface Node (CIN) with labview under LINUX... my goal is to make a CIN that can uses I2C interface (look to libk8000 from hihihihi), but it just work when i'm running it as ROOT ... is there a way to call the cin like as root.... thanks

    Hello Mister Pouf,
    Can you please explain more your problem? And give more details about it?
    Have you receive error message?
    Best Regards,
    Sanaa TAZI
    National Instruments France
    Sanaa T.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> http://www.nidays.fr/images/081110_ban_nidays09_468X60.gif

  • Question about sql batch process in java app

    hi all
    i have few questions about using batch process in the java.sql package. the addBatch method can take sql statements like inserts or updates. can we use a mixture of insert and update then? can we use prepared statement for this? it's just for performance consideration. thanks in advance.

    hi all
    i have few questions about using batch process in the
    java.sql package. the addBatch method can take sql
    statements like inserts or updates. addBatch() is a method that has no parameters. It doesn't 'add' sql statements.
    can we use a
    mixture of insert and update then? can we use
    prepared statement for this? it's just for
    performance consideration. thanks in advance.The point of batching is that you take something that is invariant and then 'add' a variant part.
    Thus a single insert has an invariant part (the table and specific columns) and a variant part (the data for each row by column.)
    You can use anything that is valid SQL (for jdbc, driver, database) and use it presuming your database allows that particular usage in batching. But that does require some regular pattern - it won't work if your usage is random. Nor will it work if some statements need to be executed only some of the time. Finally also note that transaction processing will often require smaller chunks - you can't insert a million rows in one batch.

  • Loan licensing process, and the configuration setting

    Dear Guru's,
    Can any one please explain me about loan licensing process, and the configuration setting?
    Regards,
    Pratap

    Hi
    Loan Licensing is a process mostly used in Pharmaceutical Industry in India, whereby the company which owns a particular brand or patent, lends the license to another manufacturer (Due to capacity bottlenecks or due to Cost advantages).
    This is a form of sub-contracting which might involve supply of API (Active Pharmaceutical Ingredients) or otherwise. In case some of the raw materials (Mostly Active Ingredients) are supplied by the Company it would follow sub-contract process, else it could be an outright purchase process.
    Hope this clarifies your question on Loan Licensing.
    ... Pl
    with kind regards
    Sundar

  • How to Cancel the integration process(ccBPM) after a specifice period

    Dear Experts,
    I have a ccBPM(integration process) having two receive steps using one correlation,
    1. First receive step receives the Delivery IDOC
    2. Second receive step receives the Invoice IDOC of the corrospondng delivery of the first receive step using the correlation.
    This works perfect when both the documents comes to XI.
    Problem is if the delivery comes and invoice dosen't come for some reasons then process is active and waiting indefinately. We want to cancel the integration process if the invoice IDOC is not received in 48 hours.
    Please guide how to achive this in ccBPM.
    We are working on PI7.0
    thanks and regards,
    Ravi Siddam

    HI,
    you can use block step and cancel process after a particular time(48 hours in your case)....
    control step has 3 operations.......throw exception,raise alert and cancel process..
    Thanks,
    Madhu
    Edited by: Madhu sudhan Reddy on Jul 31, 2008 8:18 AM

  • HT201263 What will i do?screenshot There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, cli

    What will i do? ITune screenshot is as follows >
    There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

    Do what it said to do.
    "Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. "

  • TS1814 There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

    There is a problem with your iPhone.
    Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
    To find your nearest Apple Store, click here.
    Please help me i can aktivate my phone imei 012423006333181.

    There is a problem with your iPhone.
    Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
    To find your nearest Apple Store
    no imei also

  • Simple question about mount and delay script

    Hello, I have a simple question about mounting volumes on start up.
    My computer wakes up auto - and then auto there are serveral applescript tasks (mount and start up programs)
    I use this script (daily) for serveral connections with external volumes I always need the connect to. ( In the script I use this code 3 times for other locations) I do this on start up.
    set Uname to "XXX"
    set Pword to "XXX"
    set someVolume to "afp://XXX.XXX.XXX.XXX/XXX/XXX
    mount volume someVolume as user name Uname with password Pword
    (same code for 2 other locations)
    When i do this on start up sometimes the script says there is no connection possible. I guess it's because on start up the connection isn't there. And 1 minute later when computer is total ready the connection is ok. When I run the script then It works. Just sometimes ( In the morning) 'It' want to connect but the script stops. When i do it manually(I run the script again) it works just fine.
    Is it possible that I need a delay? Can someone explain this?
    How would I make a delay handler for this script? Is that the best solution?
    Thanks in advance. This is something small i'm wondering about.
    Colin

    BTW, If you saved the script as an application +(and not as an application bundle)+ you could drop the script on to *Drop Script Backgrounder* (freeware).
    Then the script would run in the background, so, you wouldn't see it running in the Finder.
    <http://www.macupdate.com/info.php/id/7922/drop-script-backgrounder-x>
    Tom

  • My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs or so, then the machine shuts down and restarts.

    My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs, then the machine shuts down and restarts. This sequence will repeat seemingly forever unless I shut it down manually.
    I upgraded to Yosemite from Mountain Lion a couple months ago, skipping Maverick completely, and I've done any associated updates that Apple told me about. I don't recall which version of Yosemite I have, but I'm sure it is the "latest and greatest".
    I've tried re-starting in Safe Mode / Safe Boot and that does the same thing as described above except without the endless restarts. Instead of restarting at some point, SafeBoot proceeds to the white screen and then it hangs until I restart it manually. (I've waited as long os 20-30 minutes with no response).
    When I tried the option-command-p-r key combo I never get any chimes or other noises besides the original 1 time boot sound that you would expect to get when starting up a macbook pro.
    I was using the mac quite normally (meaning I was doing work I normally do on it and there was no indication of anything wrong) immediately prior to this happening.
    The machine is BootCamp(ed) with Windows 8.1 which I use from a VMWare virtual machine instead of natively so that I can have both OSes running at the same time. I also think this is unrelated to my problem. I have been using this setup for more than 2 years.
    My upgrade to Yosemite was uneventful and I thought it went well and was very smooth. I don't want to lead attention away from Yosemite, but at this point my problem does not seem related to the upgrade.
    Any help is appreciated.

    Install or Reinstall OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.

  • How to catch the error occurred in Integration Process, and then save it?

    1. how to catch the error occurred in Integration Process, and then save the detailed error message to the file?
    2. there are fault message type for inbound message interface, how to use the fault message type in IR?
    Thanks,
    Michael
    Message was edited by: Spring Tang
    inital
    Message was edited by: Spring Tang
    detailed message output
    Message was edited by: Spring Tang
    fault message type

    Hi Spring,
    If u give an exception step along with your Transformation Step, whenever some error occurs in your message mapping, this exception block wil be triggered.
    You can configure your exception block to do all exception processing that you want. This exception handling is like any other java Exceptio n Handler. You can do anything that you want in your exception handler block on the basis of your requirements.
    <i>If an exception is triggered at runtime, the system first searches for the relevant exception handler in surrounding blocks. If it does not find the correct exception handler, it continues the search in the next block in the block hierarchy.
    When the system finds the correct system handler, it stops all active steps in the block in which the exception handler is defined and then continues processing in the exception handler branch. Once the exception handler has finished processing, the process is continued after the block.
    If the system fails to find an exception handler, it terminates the integration process with an error.</i>
    Regards,
    Bhavesh

Maybe you are looking for

  • How to avoid the null values from xml publisher.

    I am creating a report which have the claim numbers with the values CLA001,CLA111,null, null . when i preview my report it is showing some spaces for null values also. How can i avoid the spaces from the report. I am giving for loop for the claim num

  • Maximum open cursors exceeded and cqj0 trace

    From this morning on the database is reporting the maximum open cursors exceeded in the cqj0 trace. When I see the alert log the error message appear again and again. I try to solve it by setting the open_cursor parameter but the problem do not disap

  • I can't add album art

    When I try to add album art to, well my album, the image I choose is not sticking. My album is also in a playlist. Here is what I am doing. Select all (every song in the playlist is from the same album I would like to add album art to.) Click 'Get In

  • How to get file name using File adapter Sync read

    Hi All, I am using SOA 10.1.3.3 and JDEV 10.1.3.3. I have an async bpel process. I have to read file name in this process... so i have used file adapter sync read operation. How can we get the file name with out payload using sync read. For normal re

  • Display too light nearly white

    Hi the display on my ipod nano4 is so light -nearly white- that i can't read anything really. i saw this 4 days ago then i didnt use it. today i used it the first time again and the display was normal. but now after maybe 10 minutes of usage its 'whi