A website I frequently visit will no longer come up. Safaris says that my connection has been lost but it hasn't. I even get emails from the website but I still can't get on it. Why would it all of a sudden do this?

A website I frequently visit will no longer come up. Safaris says that my connection has been lost but it hasn't. I even get emails from the website but I still can't get on it. Why would it all of a sudden do this?

The reason, I included the annotation that I'd upgraded my Itunes, (On my Computer) is B/C in many forums - the very first question, *HELPERS* ask, is. "Do you have the latest version of Itunes downloaded on your computer." I wanted to knock out any obvious replies.
Now-  "DO YOU have any idea,"... how your UNHELPFUL remarks, do absolutely nothing but hurt others that might not have the EXPERIENCE you have? How do you expect people to know things without asking questions? Whew! RUDE!!
Message was edited by: Apple I0S Help Team

Similar Messages

  • Visa write connection has been lost

    When I tried to use visa write, sometimes I will get an "1073807194" error on VISA write. "Connection for the given session has been lost" The only way to get rid of the error is to reboot computer, but the communication only be good for a while, then I got the same error again.
    Anyone know what it means? I searched the forum, back in 2001, someone post the same question, and the solution was to install NI VISA 2.5.2 But I am using LV8, NI VISA is 3.4 now.
    Thanks,

    Hi DGU,
    I'm assuming that you are using VISA to communicate over TCP/IP.  This error is indicating that a connection has been lost with the network.  You can enable or disable this keep-alive checking using a VISA property node.  Here's a link to the LabVIEW 8 Help information on how to use this:
    http://zone.ni.com/reference/en-XX/help/371361A-01/lvvisaprop/tcp_keepaliveinstr/
    There a few more helpful links in the Resources section of this page.  Also, here's a KnowlegdeBase entry that explains how this keep-alive property works.
    http://digital.ni.com/public.nsf/websearch/072E607EE6E48AA986256F43005D2969?OpenDocument
    Since rebooting fixes this issue, the problem may be with how Windows is handling this network.  Is Windows reporting that the connection is being lost?
    Michael Chaney
    Systems Engineer - TestStand
    National Instruments

  • After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

    After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

    The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
    Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
    Regards.

  • TS2446 im trying to change my password for my apple id but its says that my account has been disabled for security reasons, how can i solve this problem?

    im trying to change my password for my apple id but its says that my account has been disabled for security reasons, how can i solve this problem?

    Depending on why it's been disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
    If it then works on your computer's iTunes but not your phone/iPad then try logging out of your account on the phone/iPad by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it

  • I have been with google for while now but I still can't access to google wallet, Would you please show me how? thanks

    I HAVE BEEN WITH GOOGLE FOR WHILE NOW BUT I STILL CAN'T ACCESS TO MY GOOGLE WALLET, BOTH ACCOUNTS, PERSONAL AS WELL AS BUSINESS. WOULD YOU PLEASE SHOW ME HOW? THANKS

    Seems like that would be a better question for a Google forum since it it Google's app. Here is a link about it from Google:
    https://www.google.com/wallet/
    If you need further help, I would suggest you post to a Google forum.
    GB

  • Authorisation on my pc has been lost, when I try to reactivate I get the following error message  "code: E_AUTH_NOT_READY"  What can I do?

    For some reason I can not get into my ADE and get the error message "code:  E_AUTH_NOT_ READY      Digital Editions encountered an error on the activiation server.
    What can I do as it will not let transfer items to my Sony reader.  Thank you

    yes, I agree with what you say: the note '==> ...' is the solution to
    my problem, found it after some time in another thread  
         regards
         Von: sjpt <[email protected]>
         An: zwergenerv <[email protected]>
         Betreff: after updating ADE to version 2.0 I
    am getting the error message 'code E_AUTH_NOT_READY'
         Datum: Mon, 23 Sep 2013 10:59:41 +0200
    RE: AFTER UPDATING ADE TO VERSION 2.0 I AM GETTING THE ERROR MESSAGE
    'CODE E_AUTH_NOT_READY'
      created by sjpt in Adobe Digital Editions - View the full
    discussion

  • My phone was stolen will i get an email if i ever get an email saying that my iphone has been found?

    because on find my iphone it say lock sent, but hasnt recieved ive sent a report to the police but i doubt they'll do anything what i noticed is that the serial number is unique and is there any possible way of finding out if someone has re-registered the device and then getting an email sent to me

    If some re-registers the phone, why would you get an email? It's unlikely that they will register it with your email address.

  • My computer has been wiped but I still have the songs on my ipod how can i get them back into my newly downloaded itunes?

    My computer has been wiped and I've lost everything including itunes.  I have the songs on my ipod how do i get them back into my newly downloaded itunes?

    Please see the Knowledge Base from turingtest2 below
    https://discussions.apple.com/docs/DOC-3991

  • My ipod will not sync now that windows 8 has been installed, but ipod worked fine before

    I am running a Ipod Nano think it's 3rd or 4th generation, when I had windows seven the ipod would be syncing fine with my iTunes, not that windows has updated windows to windows eight, I am now experiencing problems with my ipod syncing to my iTunes. It recognises the ipod but will not allow me to access it or change the music on it. I have followed all the More Info steps from the box that appears on my iTunes, I now am at a loss as to how it will ever work again, so I am stuck with the music on my ipod until I can change it. How do I go about getting my ipod back to syncing with iTunes after my windows update?

    Try:
    Sync Session Failed to Start iTouch iOS5: Apple Support Communities
    iphone could not be synced sync session failed to start...: Apple Support Communities

  • My serial number when entered, says that my iPad2 has been replaced. So my registration is invalid, and so's my applecare. The apple shop can't help, applecare says we only fix things, and tech support only raises cases, but doesn't solve the problem!

    Hi,
    Bought IPad 2 from an authorised reseller in Bangkok, Istudio. Added on an Applecare contract for it. All happily registered to my appleid and confirmation emails got from apple and applecare.
    A month later, I get an email from an apple shop in Canada (never been to that country), telling me that my Ipad cannot be repaired and has been replaced. I raise the issue with Apple Tech Support, they tell me that maybe the person in Canada entered the wrong serial number.
    Now when I check my serial number, it says this Ipad has been replaced, and so obviously that even makes my applecare invalid.
    Went back to the store, went to the service centre and went back to tech support, no joy.
    Any suggestions? on how do I resolve this?
    Thanks
    Dean

    contact us option on sellers website
    http://translate.google.co.uk/translate?hl=en&sl=th&u=http://www.istudio.in.th/s tores.php&sa=X&ei=69ndT6LXG6mb1AWBn7XqCg&ved=0CFcQ7gEwAA&prev=/search%3Fq%3DBang kok,%2BIstudio%26hl%3Den%26biw%3D1920%26bih%3D1075%26prmd%3Dimvns

  • I keep getting error messages on the calendar since downloading the new software on my IPAD2. It either says "cannont save event. That event does not belong to that event store" or I get an error message that says that no calendar "has been set".

    I keep getting error messages on the calendar since I downloaded the new software on my IPAD2.  When I try to add a new event it either says "That event does not belong to that event store" or it says "the calendar has not been set".  Does anyone know what these messages mean or how to address this?

    I'm getting the same issue on my ipad2...I set up a new calender and now I keep getting this error message....how do I fix this?

  • Trying to download and keep getting message saying my Apple ID has been disabled but I can log into store, etc... I went to the support site buit no help. I emailed but said would take 2-4 days for response. I just wanna listen to my music!!

    Trying to download my music on a new PC. I've authorized PC and can log into store, etc.. But won't let me download. Says Apple ID disabled. No help on support site. I emailed but will take 2-4 days for response.

    We are all itunes users just like you
    You are not addressing Apple here at all
    You need to contact itunes support:
    http://www.apple.com/support/contact/

  • I'm trying to change my apple ID and it says it has been verified, but it still will not change on my phone, so I cannot access my iCloud or iMessage, what am I supposed to do to fix this problem?

    I have been trying to change my Apple ID for my iPhone account because the e-mail on there is an old e-mail that I cannot use anymore. I have went on the website and went through all of the steps of changing it, and I've changed everything to my updated e-mail and verified it as well. On my phone, it still has my old e-mail address, and keeps popping up any time I try to access iCloud, iMessage, etc. that my password or e-mail is invalid. I'm not sure why it's not changing on my phone or what other steps I'm supposed to take in changing it.

    If they are no longer in your camera roll, save them to your camera roll before deleting the account (open your my photo stream album, tap Select, tap the photos, tap the share icon -- box with upward pointing arrow, the tap Save to Camera Roll).

  • Keep getting error message that says that SSL protocol has been disabled

    When I try to sign on to sites that need more security (ie., banks, online shopping), I get the following message and cannot log on to the website.
    ss/_error_ssl_disabled
    I have tried reading your trouble shooting articles on this site and still haven't been able to fix the problem. Can you please help?

    See:
    * [[Secure Connection Failed]]
    * http://kb.mozillazine.org/SSL_is_disabled

  • Report has been generated , but *.rep file can't be ran.PLEASE HELP!

    Hi,
    I am facing real challenge.
    I've created report based on the stored function(packaged function).But when I try to run *.rep file I get Rep-1219< "F_xxx" has no size -- length or width is zero.>Well , my field does have a size.Also what is interesting that if I go back to the *.rdf file and try to run inside Reports during design second time I get the same error . Then if I go thru wizards again I get
    Rep1106 <warning no field generated for the column "bla-bla">, and I get this message for the all my columns that I have in the second group.My report is group above.I am sure that 1106 is the cause for the 1219 in the runtime.But then if go thru wizard once again after all those 1106 messages I am able to generate report!!!! And then I do editing of report and successfully generarate new *.rep file, but when I run this file I get the same results already described.
    In my report I have formula column(1) that gets value from another column(2) if values in the 3rd column not null, then I summarized column (1) at report level.
    Just creating summary for the column(2) is not an option for me, because I need some values, but not all of them.Another select statment is not gonna work , because as I said, report is built on function returning ref cursor.
    So can anybody help me with this problem?
    Or any suggestions?
    Thanks a lot in advance.

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Yu:
    I've tried all:manually increase fields,
    increase size in layout model, nothing worked.
    What else can be done?<HR></BLOCKQUOTE>
    Hey ,
    Check this out
    Cause: When you defaulted your layout, a field was not generated for the column in the message. The most likely cause is that a summary was not placed in the data model correctly. For example, you may have specified the source of a summary column to be a column in a group above the summary's group. This is not allowed.
    Action: Debug your data model and redefault your layout.
    I hope the problem is group layout..
    Cheers ...
    Krishna ...

Maybe you are looking for