A workflow with the same name already exists.

Hi, whenever I am trying to create a workflow in my MOSS teamroom, I am getting the error "A workflow with the same name already exists". I am getting this error message no matter what name I give. I checked all the lists and document libraries to see if there are any workflows but that doesnt seem to be the case. I opened the site in SPD and there also no workflows are listed.
Any insight will be appreciated.xwindow

I know it is a bit outdated but someone might found this helpful:
The other possible problem could be that the SPD lost connection with the Sp site for a sec but on the local machine there is a workflow with that name. ( In this case if you try to rename your workflow it gave you the same error message )
So have a look in SPD click on All files then select Workflows and delete the workflow that is causing the problem.
After this exercise you will be able to rename or re save your Workflow.

Similar Messages

  • HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

    Still  using the @mac.com   mail  address and up   to date on everything, but have not gone to Maverick.  All of a sudden Mail wouldn't let me delete.  Said that title of email was already in trash.  And sure enough it was.  Clicking on the help button on the message gets Nothing.
    The selected topic is currently unavailable.
    The topic you were trying to view could not be found.
    "couldn’t be copied to “Messages” because an item with the same name already exists."
    Any ideas.  My mail is not tied to gmail etc.. just all by it's lonesome.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Firefox could not install the search plugin from "chrome://tnt2toolbar/content/yos.xml" because an engine with the same name already exists.

    each time I open Fire Fox I get this error "Firefox could not install the search plugin from "chrome://tnt2toolbar/content/yos.xml" because an engine with the same name already exists." and
    I can't search for anything. HELP!!!
    Thanks
    Tom

    That is a problem with an extension that tries to install a search bar. The tnt2toolbar should give you a clue about which extension. You didn't add troubleshooting information with the list of installed extensions, so I can't give a suggestion about which extension is causing this.
    You can check for problems with preferences.<br />
    Rename or delete the prefs.js file and possible numbered prefs-##.js and user.js files to reset all prefs to the default value.
    *http://kb.mozillazine.org/Preferences_not_saved
    *http://kb.mozillazine.org/Resetting_preferences
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Cannot delete read mail. Keep getting the following message "926540.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

    I am trying to free up room on my hard drive but keep getting the following message. “926540.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. 926540.emix is the number given to the email I want to delete. This message appears (with a different .emix number) when I try to delete any mail. I have junk mail from 2014 to 2009 that I want to delete

    Back up all data. Rebuild the mailbox. Try again to delete the message.

  • When deleting messages I get this message:"74608.emlx" couldn't be copied to "Messages" because an item with the same name already exists.  How can I fix this problem?

    When trying to delete messages in mail, I've been getting this message:“74608.emlx” couldn’t be copied to “Messages” because an item with the same name already exists."  The numbers at the beginning are always different but the ".emlx" and the rest of the statement is always the same.  How can I fix this problem?
    Thanks
    Candy777

    HT2500 Error when deleting email: Apple Support Communities

  • One particular plug-in that I am trying to install reports 'an engine with the same name already exists.' However I cannot find it, even using the troubleshooting routines

    Hi,
    I am trying to install a add-on that will enable Google to behave as if I am in the USA. When I try to install the add-on I get a message which says 'An engine with the same name already exists'. However, I can find no evidence of the add-on and I have been through the various troubleshooting routines. Anybody know of a way around this?
    I have looked at the list of installed plugins and cannot see it. So whty does does FireFox think it's there?

    Hey oks10,
    It sounds like the Bing plugin might have been corrupted. I would bet that it's still installed, but not working. Try removing it from the \searchplugins\ folder in your [http://support.mozilla.com/en-us/kb/Profiles#How_to_find_your_profile profile folder].
    I'd close and restart everything after you are done, then try installing it again.

  • "91590.emlx" couldn't be copied to "Messages" because an item with the same name already exists. How do I fix this?

    The delete button in Mail gives me this message: “91590.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. The only thin that has changed is an OS update last evening. (Mountain Lion)

    Thanks...it was spooky seeing the mail in my box suddenly disappear and blank after going to Mailbox and Rebuild.  But "poof" it was up again and was able to delete without the messages telling me it had a duplicate in trash (which it did).  Solved the problem.

  • Messages could not be moved to the mailbox "Trash - "122730.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

    Cannot move messages from mail to trash.  Get the following message:    messages could not be moved to the mailbox “Trash — “122730.emlx” couldn’t be copied to “Messages” because an item with the same name already exists.

    I just started having the same problem but have found no solution.

  • TS3276 "23354.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

    I'm getting this message when trying to delete an email; can't figure out what is causing alleged 'duplication'.  Has anyone seen this before?   

    I just started having the same problem but have found no solution.

  • Mac Mail, can't move to Trash : error "227845.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

    this just started popping up last weekend? Any ideas?
    Mac Mail on Mtn Lion.
    POP email acct
    No changes to settings in Months
    thanks.

    if it has something to do with moving my Applications folder away from the SSD drive and to the HD drive
    HI ...
    Absolutely.
    Apps must be stored in the Applications folder on the startup disk they were downloaded to.
    It's not a permissions issue. 

  • What does this message mean? "185605.emix" couldn't be copied to "Messages" because an item with the same name already exists."  I am not able to move incoming email messages to Trash

    How can I send messages to Trash.  I have been able to do it for two years, until this morning. Thank you.

    Back up all data. Rebuild the mailbox. Try to delete the message again.

  • When clicking "Save image as" how can I get Firefox to auto add a (1) (2) etc at the end of the filename if an image with the same filename already exists?

    How can I get Firefox to automatically rename images when clicking "Save image as" on the menu, when an image with the same file name already exists in the folder??

    Hello,
    That is not a feature that is supported natively within Firefox but there are various add-ons which I think will do the job you need.
    The one I have used is [https://addons.mozilla.org/en-US/firefox/addon/web-slide-show/?src=search Web Slide Show]. This is primarily an add-on for viewing a slideshow of images when they are presented as thumbnails on a web page. However once you are in the slideshow there is a download button which will download all the images in the slideshow. It will automatically rename the images if an image with the same name already exists in the folder.
    If you don't like that add-on then here are some others that may do the same job:
    * [https://addons.mozilla.org/en-US/firefox/addon/image-download-%E2%85%B1/?src=search Image Download II]
    * [https://addons.mozilla.org/En-us/firefox/addon/image-picker/ Image Picker]
    I hope that helps. Let me know if not.
    Also I notice that you are using Firefox v23. That is now an outdated version. To get the latest security updates I suggest updating to version 24. See the support article here: [[Update Firefox to the latest version]].

  • Project Server 2010 and Report Builder 3 : the same name already exists

    Hi,
    I created my first report in Report Builder, and,
    although it's not perfect, I tried to save it. But I get the error :
    Impossible to save the report "No title.rdl". A file from another type with the same name already exists".
    I tried to change the name 5 times but I always got the same error.
    Any idea ?
    Thanks

    Hi WLID,
    I have taken a sample test in my environment, it works well. If there is already another type file named “No title” on report server, then it can be saved on report server. If there is already a report named “No title” on report server, then it would prompt
    that “An item named ‘http://servername/reportserver/foldername/No title’ already existed. Do you want to replace the existing item?” when we want to save the report in the same folder.
    What’s the location that you want to save the report? Is it a report server or others? Could you please provide us more information about the issue? You can try to reopen the Report Builder, then create another simple report to text the issue again.
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Web Matrix FTP Remote Connection Error - "Connection Error - Failure to get file list from server. An entry with the same key already exists."

    Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
    "Connection Error - Failure to get file list from server. An entry with the same key already exists."
    I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
    is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
    All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
    Issue Persists....
    Thanks in advance,
    Justin

    Turns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
    This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages.

  • How can I overwrite a file with the same name in Content DB?

    Hi All,
    In Content DB if I upload a file with the same name as a previous one, the application shows the warning message:
    " ...You cannot upload "XXXXXX.doc" to "Test 1" because an item with the same name already exists ..."
    And the alternatives are "Create Version" or "Cancel" the operation. Is there any way to overwrite a previous file as we can do it in Oracle Files ?
    Regards
    Harvey

    Hi All,
    Can anybody from the Content DB product development answer this question?
    Regards
    Harvey

Maybe you are looking for

  • How to capture PKID after insert in Oracle

    All-- Please help. This is a general question about Oracle in general, in the hope that someone has solved this problem. I want to capture the PKID after an insert into Oracle. I expect that this is just a syntax issue. I use DataAdapter.Update() pas

  • Calling and Publishing Web Service

    Hi, I am new to Web Services in SAP. Got 2 questions regarding this: 1. How do we call a Web Service from SAP? 2. If I want to publish a Web Service in SAP ECC6, what are the required steps? Sorry, haven't had much luck with my searches. Thanks in ad

  • Alternate Hierarchy in same version

    HI, I have a requirement to create an alternate hierarchy in the same version. In a current version, we are having a hierarchy named as HN_Managerial. Our requirement is to have an alternate hierarchy named HN_Managerial_Mgmt which should be the exac

  • Finding Stored Procedure(s) Executed

    Hi, I need to find which stored procedure got executed when I run my application. My application is in .NET and I am using Oracle 9.2.0.5 Thanks in advance. Pravin Pawar

  • My photostream do not work on windows 8 pc

    After having changed country for itunes store etc. My photostream do not connect from my PC - still works between the two iOS devices (iPhone & iPad) I have. I have tried reinstalling on the WIndows 8.1 PC, but nothing helps.