A205-S5000 won't boot. Says possible hard drive problem

Laptop won't boot and says possible hard drive problem. Need to recover
personal reports and data, so thinking of removing the drive and using an enclosure
so the data, if still good, can be extracted from the drive by another computer. Question
is, will I be able to create the restore cd's from the hard drive if the hard drive is not the
boot drive ie; attached to a 2nd computer via usb and enclosure. 
If it's not possible, I can try to create cd's from a different model laptop (toshiba), same vista os but
what about the product key?  I will try to reinstall the bad drive and try a reboot to recovery mode but
I doubt that is going to work or complete. Idea was to get a new drive and try to install recovery disks.

Satellite A205-S5000
Recovery discs must be from an identical model. If you can't burn them from that computer, best to order them
   Order Toshiba Recovery Media 
The restored Windows is pre-activated.
-Jerry

Similar Messages

  • My mac won't boot from the hard drive

    Hi Everyone
    Yesterday, I tried to dual boot my mac using the Bootcamp Assistant. The hard drive partitioned fine & then started the Windows setup. About half way through it found a corrupt file & cancelled the install. It went back to OSX absolutely fine & was working perfectly. I deleted the partition that had been created & then noticed that the amount of free space on my hard drive was missing the 20GB that I had partitioned off for Windows. I used OnyX to try & find the missing 20GB; it finished & then I tried to open Safari & received an error message. I tried again & received the same message so tried to restart the mac & ever since it hasn't wanted to boot using the hard drive.
    It will boot from the CD & I can use the Disc Utility to see the hard drive (which makes me think that the mac is seeing it) & can verify & repair both the disc itself & the Disc Permissions but if I click Startup Disc I only get 2 options: The DVD itself & Network Drive. I also can't re-install OSX onto the Hard Drive as it comes up with an exclamation mark & wont let me go any further in the process.
    I'm hoping that someone will have an answer other than erasing my hard drive & starting again (which isn't that big a problem as I backed up all the important bits before starting any of this!)

    Why did you wipe the drive?
    Were you having problems?
    If you were those problem may be related to a failing hard drive and that is why the TM backup could be restored.
    In you topic header you say the system won't boot from the SL DVD, But it di for you to wipe the drive. Then it should again boot from the SL DVD.
    Insert the DVD and reboot, hold down the Option key and select the Optical drive, SL DVD, as the Boot source.

  • Windows HP laptop won't boot Windows - possible hard disk failure!

    Hi there!
    A month ago my HP Pavilion dv6-6b57sa completely froze mid-use, and was unable to move the mouse or get any sort of response.
    Naturally I held the power button to hard shutdown and restarted. Ever since then I have been unable to boot Windows 7 (the original OS) properly, and all I could get to was a Startup repair which took days to try to fix the issues, eventually coming up with a message saying it was unable to fix the errors.
    Today I decided to ditch the data I had stored and do a fresh install - using the HP wizard by pressing F11 on boot and using a newly created USB Windows 7 install drive. After getting to the point of install process of Windows just loading the files, after choosing a hard drive partition successfully etc. the installation quit, citing a number of issues (screenshots link are below).
    So I then try to restart the computer, and get a 'SMART Hard disk error' (screenshot link below) and when I select continue startup from there, it says Windows failed to start (screenshot link below) and then leads to me to the Startup repair manager again - which fails again - (screenshot link also below!)
    So after doing a hard drive test, it says it has failed (screenshot link also below).
    So what can I do? Is there a serious hardware related issue linked with the hard drive (which is bound to cost lots of £££ I bet), or are there further steps I can take?
    Screenshot links: http://1drv.ms/1jnjviU
    Many thanks for your help in advance,
    Max

    Yes and you had to at the moment since you won't have a key unless you buy one from Microsoft for about 99 dollars.
    Try you best to get the key readble I mean try to read it, good luck!
    Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
    **Click the White thumb if you like the answer.**
    **Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
    Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

  • Macbook won't boot on primary hard drive

    i have a white macbook 2006 i believe, i installed a 500gb hard drive into it about 4 months ago, and just now it stopped working. it won't boot at all from the hard drive. i got it to boot from my external hard drive that was the original 120gb that came with the macbook. After booting from external it continues to freeze when i open i-tunes or the internet. Don't know if it is just the hard drive because getting problems with the other one as well. don't know what is wrong. any advice would be helpful.

    I got a new hard drive recently 500gb seagate. I followed the directions on this page http://www.ehow.com/how2063795format-hard-drive-mac-os.html , Mine was a little more complicated since i had 2 partitions windows and mac on mine. Initially the process took a day and it started getting to the same thing as yours where it would get to the mac logo and not find the hard drive. I reformatted several times before i got to the point where i could boot up.Eventually I just figured out all the info was there the drive was formatted i could boot into windows 7 but not mac. So i put old hard drive back in the computer booted up with that. Attached new hard drive via usb in external case i was trying to put in the mac. I was able not to boot up but it would show the drives that have been formatted into the new drive and i simply copied my existing Disk by dragging it onto the new hard drive. Than turn off your mac keep your hard drive plugged in. Press and hold the option key in start up and you should see the 2 seperate hard drives and be able to boot into the new one. Was a long process for me took several complete deletes of the new hard drive and reformatting before it would work. once you get to the mac logo and spinning wheel its just saying mac cant find your boot up disk though. Sorry its confusing a bit any questions email me.

  • MacBook won't boot from new hard drive.

    I'm trying to upgrade my hard drive, but my macbook will not boot to the new hard drive. I have erased and cloned the hard drive about three times now, using both Carbon Copy Cloner and SuperDuper. It won't boot while it is in the macbook and it won't boot from an external hard drive case. All I get to is the screen with the mac logo and the spinning wheel. I have made sure the drive is GUID formatted, but it still doesn't work. When I put the new drive in an external case and plug it into the USB port of my macbook I can see and access everything on the drive. Can somebody please tell what I am doing wrong?
    By the way the new hard drive is a 500gb western digital Scorpio blue drive.

    I got a new hard drive recently 500gb seagate. I followed the directions on this page http://www.ehow.com/how2063795format-hard-drive-mac-os.html , Mine was a little more complicated since i had 2 partitions windows and mac on mine. Initially the process took a day and it started getting to the same thing as yours where it would get to the mac logo and not find the hard drive. I reformatted several times before i got to the point where i could boot up.Eventually I just figured out all the info was there the drive was formatted i could boot into windows 7 but not mac. So i put old hard drive back in the computer booted up with that. Attached new hard drive via usb in external case i was trying to put in the mac. I was able not to boot up but it would show the drives that have been formatted into the new drive and i simply copied my existing Disk by dragging it onto the new hard drive. Than turn off your mac keep your hard drive plugged in. Press and hold the option key in start up and you should see the 2 seperate hard drives and be able to boot into the new one. Was a long process for me took several complete deletes of the new hard drive and reformatting before it would work. once you get to the mac logo and spinning wheel its just saying mac cant find your boot up disk though. Sorry its confusing a bit any questions email me.

  • MacBook Pro won't boot with new hard drive, but a different MacBook Pro will

    So here are the details. My friend and I both have 13-inch Mid 2010 MacBook Pro's. Same processor and specs since they were purchased at the same time, but originally had 250 GB hard drives. His hard drive failed and needed a new one. Put a 500 GB Seagate Momentus 5400.6 in his computer, and tried using a flash drive with "Install OS X Mavericks" on it to install Mavericks on his new hard drive. No matter what, it wouldn't install. I finally was able to install OS X 10.9.4 on it by connecting the new hard drive to my computer with a USB hard drive enclosure. I put the hard drive back inside his computer and it wouldn't boot (stuck on the gray screen with apple logo and a spinning wheel). I then attached to the hard drive to his computer externally with the USB enclosure, and then it booted and worked perfectly.
    So, it seemed like the problem was with something inside his computer, but then I switched our drives, and that doesn't seem to be the case anymore. I put my original hard drive into his computer, and his new hard drive into my computer, and they both booted and worked perfectly, so I have no idea why his computer will not boot with the new hard drive internally.
    To summarize, his computer boots with: 1) new hard drive connected externally (won't work if it's internal), and 2) my hard drive internally
    but my computer boots with: 1) new hard drive connected externally AND internally, and 2) my hard drive internally.
    Both hard drives have OS X 10.9.4 installed
    If anyone has any idea what's causing this and how to make his computer work with the new hard drive internally that would be greatly appreciated.

    So after switching the internal SATA cables from each computer, now we have
    His computer, with my SATA cable:
    1) Worked with every hard drive!
    My computer, with his SATA cable:
    1) Works with 1 TB Toshiba hard drive
    2) Works with 500 GB Seagate hard drive
    3) Works with my original hard drive
    4) Flashing folder with question mark with his old hard drive
    So it turns out you were right! Definitely had something to do with the SATA cables. But it's still strange that mine was able to boot with all the hard drives except the one that was originally in his. So it seems like it was some combination of his SATA cable and something else, since when his SATA cable was in his computer only 1 hard drive (my original) worked, and when it was in my computer, 3 hard drives worked. But at least its working, and I'm just gonna keep our SATA cables switched since that seems to work out fine

  • Windows xp won't boot after cloning hard drive to a bigger drive

    I have a HP Pavilion Dv4170us laptop added some new upgrades to it.. max RAM 2GB... a new battery... and I bought a 160GB samsung IDE drive to replace the origional 100GB drive...Using EZ Gig II software and usb drive adapter I successfuly cloned the smaller hard drive but when I swaped them out it won't boot windows xp.. just a black screen with the blinking curser at the top left corner... using my windows xp pro disc.. i ran the system recovery and tried first fix mbr command... then I tried fixboot.. I also looked for the boot.ini file which is not in the C: root drive...I only found a back up copy of it in the windows/pss folder... this is on both drives.. so the cloeing copied it all... but the origional drive will boot and the new one won't... I even tried reinstalling XP as a repair installation...still nothing... any ideas??

    wsev1955 wrote:
    I have a HP Pavilion Dv4170us laptop added some new upgrades to it.. max RAM 2GB... a new battery... and I bought a 160GB samsung IDE drive to replace the origional 100GB drive...Using EZ Gig II software and usb drive adapter I successfuly cloned the smaller hard drive but when I swaped them out it won't boot windows xp.. just a black screen with the blinking curser at the top left corner... using my windows xp pro disc.. i ran the system recovery and tried first fix mbr command... then I tried fixboot.. I also looked for the boot.ini file which is not in the C: root drive...I only found a back up copy of it in the windows/pss folder... this is on both drives.. so the cloeing copied it all... but the origional drive will boot and the new one won't... I even tried reinstalling XP as a repair installation...still nothing... any ideas??
    Hi,
    Can you see the new hdd in the BIOS?
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • IMac won't boot after replacing hard drive and restoring from Time Machine

    I was having problems with my iMac but upgraded to Lion when it came out. Had a few good days and then my hard drive died.
    I had the drive replaced and the repair people put Snow Leopard on the new drive.
    I then tried to restore everything from my Time Machine backup. At first when I tried to log on the computer wouldn't accept my password (i know it was right).
    I decided to reinstall again using the snow leopard dvd i had. This time, the computer booted up (didn't ask me for a passord) and looked like it was in the process of setting things up. But Mail kept saying it was going to import messages but then quit and restarted a few seconds later. When i quit it it just came back again and again. I could see Chrome open behind it with my bookmarks in the toolbar and see other restored things, but the overall look was grey and not everything was there.
    When i restarted from the HD and not the dvd i could never get past various shades of grey and the circling progress indicator. Never booted up at all.
    I read about Lion having some restore hd functionality but it doesn't show up when i restart with option key. Am I in limbo between operating systems?
    Any advice as to steps to take? I don't know much about this stuff.
    Thanks for any help.

    Yes, if you picked a Snow Leopard backup, that's what you got. 
    You could pick a Lion backup, and it would restore it, but that wouldn't create the Recovery HD, which you will need, sooner or later.  See Using the Recovery HD.  You'll need to re-download Lion for that to be created.
    When you do that, after downloading but before installing Lion again, you might want to do this: Making a Lion Install disc or partition.  Then if you need to reinstall Lion again, you can do it from that, instead of having to download it again.

  • Panther is installed but won't boot from iBook hard drive

    Hello,
    I made a similar post in the iBooks colors section of Discussions on this topic not quite knowing whether this was a hardware or software issue. I finally got Panther to install after using Disk Doctor to check for and fix errors on 9.2.2 (I would never use with OSX) and also rebuilt the directory while booted from an OS 9 CD and running Disk Warrior from a floppy and taking out the airport card. The Panther CD told me to restart the computer after installation. During the OSX start up from the hard drive I saw a gray screen and the dark gray Apple logo with the spinning gear then the computer crashed and a message appeared that I needed to restart the computer. After restart, the same sequence of events happened again. I have tried to restart from the OSX using the full retail CD used for intallation and the computer also crashes. I cannot start up from the Disk Warrior CD either. I have also tried make a Safe Mode start up and the iBook again crashed with the restart message appearing again. When I restart in OS 9 everything works perfectly, OS, airport and applications. I did have Jaguar installed on this iBook until five months ago, but incounterred issues with it and decided that more RAM would solve my problem. I then decided to initialize the hard drive and reinstall OSX after purchasing 256 RAM. The 256 stick of RAM was bought from ifixit.com and a guy there told me he thought that the logic board needed to be replaced. I explained to him that the computer works perfectly fine in the OS 9 mode, but he said that 0SX is more demanding and 9 can get by on less than perfect logic board. I also reinstalled the 128 MB RAM that was in the computer when Jaguar was running on it, but that didn't help either. I have scoured the iBook and Panther OSX sections of Discussions for any others having a similar problem, but not such luck.
    I would appreciate any information or suggestion that you might have as to what may be causing this issue on my iBook.
    Thank you.
    Greg
    iBook   Mac OS X (10.3.5)   300 mhz 320 MB RAM

    Greg:
    You have probably already tried this, but the first thing I would do is reset the PRAM.
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    Also, check out this Apple article Your Mac won't start up in OS X.
    Good luck.
    cornelius
    PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X (10.4.5)   Mac OS X (10.4.5)   Beige G3 OS 8.6

  • Mac Pro won't boot when a hard drive is in drive bay 1

    I have a 2006 Mac Pro with a slight issue.
    Whenever I put a drive in bay #1, the system will no longer boot.
    I've removed all of my hard drives except my boot disk.
    Placed it in drive bays 2,3 or 4, and it boots no problem.
    When I place it in drive bay 1, the system won't go past the grey screen.
    When I hold down the option key when booting with the drive in bay #1, the arrow pops up like I will have a choice of selecting the boot disk, but then no choices appear.
    It's super strange. The computer is still working great, it is just a little annoying that one of my drive bays is no longer functional.
    Any ideas?

    It seems the problem is not with the hard drive(s) since they work in another bay. So the thing to check is the power and SATA cabling from the bay to the motherboard. The SATA cables from the bay plug into the motherboard and perhaps has come loose, gotten dirty, or tarnished. Likewise the connector on the drive bay may be dirty or tarnished.
    So my only suggestion is to check the cabling and connections.
    Tom

  • My PB G4 won't boot from any hard drive..stucked in apple icon..

    At first, it didn't boot from the internal hard drive...
    I could see the apple icon with grey background, but the little runing icon under apple icon didn't appear. There is no sound from the hard drive either...
    I tried removing and replacing the RAM, didn't work either...
    I have the powerbook CD with apple hardware test, I ran it. It went though a detail test and showed no errors or problems....
    And then I tried to start up from the powerbook CD, it works and I was able to go to disk utility. However, I cannot complete verifying disk permission because of a lot of problem, sometimes it said "communication error with disk manager" and sometimes it got frozen and sometimes it just simply stop moving (not frozen, but just not moving, the disk is quite also too).
    then I tried to boot from my USB external hard drive, I had my backup in it. However, it is the same as booting from internal drive, no running icon below the apple icon. Also, the external hard drive did not make any sound.
    I have never experienced this problem... please help...

    Have you added any hardware or new software recently?
    Have you tried a safe boot? Hold the shift key while you boot - this does some disk maintenance and doesn't load login items. If this works, try booting normally.
    If you can't run Disk Utility verify permissions from the OS X CD did you also try to verify or repair the disk? If this won't work due to errors, you may want to consider a program like Disk Warrior to attempt to repair the hard drive. You can find it at http://www.alsoft.com/DiskWarrior/

  • IMac 24 Aluminum won't boot from USB Hard drive

    I just got an iMac 24 from the Apple Refurb store. It comes with Snow Leopard, but I need to install a Leopard partition for my wife to ensure 100% compatibility with Photoshop CS3, among other things. I created a partition just for Leopard, so that's good to go.
    I can choose the boot partition on my Leopard install drive when starting by holding the "alt" key, that's no problem. However, after I choose that USB drive, it reboots... over and over and over and over. To be sure it isn't the drive, I tested it with my Macbook Pro, and it booted up just fine. I tried another USB drive, same exact problem.
    I don't have a Firewire external that I can repartition for the purpose of installing Leopard. I only have it on hard drive. Then I tried making a DMG with disk utility and burning it to a DVD+R DL, but it tells me the disc isn't large enough, even though it's 8.5GB and the image is 7.6GB.
    Pulling my hair out here guys! Is this refurb a lemon?

    The Leopard install DVD I used to make the image is not available, it got stolen along with laptop bag it was in last Spring.
    Is it this "image" (clone) of the installation disc that you are trying to boot from a USB drive, or a full installation of Leopard? If it's a clone of the installation disc on a USB drive, there are a few considerations.
    First, what type was the original Leopard disc (the one you lost)? Was it a retail disc (the type sold separately in a box) or one that came with another Mac model, such as a MacBook Pro. If it's the disc from a MacBook Pro, it will not work because your iMac is a different model. Those included disc usually only work with the model it came with.
    If it's a retail disc, the other consideration is the version on the disc. If you look at that everymac.com profile page, it says that the (earlier) pre-installed version of Mac OS X is 10.5.6 (9G2030). If that retail Leopard disc was earlier than 10.5.6 (such as the original 10.5.0 disc), then it will not boot that iMac because, as I said in the first reply - +Macs can generally boot the version of Mac OS it came with, or LATER (up to hardware limits), but NOT earlier.+
    If that USB drive you are trying to boot the iMac from has a full installation of Leopard, please post back.

  • MBP won't boot due to hard disk problem

    I have a late 2008 which just started to have problems booting up.
    The trouble started a week ago, when my MBP would shut down unexpectedly while I'm working(on battery power). When I tried to reboot from battery power it didn't work. However, it's not the issue of low battery level. I had plenty juice in the battery. So I attached to the mag safe power supply, it would boot up again.
    On yesterday morning after another unexpected shut down, I plugged the mag saft back in and hope it would boot up again. Never again. It will alwasy stuck at the gray screen with a spinning circle. So I did quite a few standard checks such as booting from Snow Leopard install DVD, and run DiskUtility. It tells me my MBP Hard Drive has problems and can not be repaired. So I figure it's the HD problem. Now I just want to salvage some data off from that HD, get a new HD and start over again.
    I tried to boot from DiskWarrior 4.2 DVD, it didn't boot up. It boot up fine with Snow Leopard DVD. So the optical drive works fine.
    The HD is the Hitachi 7200rpm travelstar 250GB.
    Any advice?

    I totally agree with making a Super Duper copy of the drive before proceeding with anything else--that creates an exact copy of the problem drive so that everything is preserved. It would also create a duplicate that could be used to experiment with.
    One way to do this is to get the replacement drive for the MBP and place it in an enclosure, maybe even using one of OWC's kits. The MBP's drive is already mounted on the Mac Pro's desktop, and the new drive in the enclosure can also be mounted on the MacPro's desktop and properly formatted using Disk Utility. Then Super Duper can be launched and used to copy the MBP's drive to the new drive. Once that's done, the OS could be reinstalled on the new drive and we would be able to see if that cured the password problem. Since Super Duper can make a bootable clone, we could see if the MBP would boot from it by plugging it into a MBP port and trying an option boot. If everything works, you can just install the new drive in the MBP.
    Doing something like this does not touch the original MBP drive and its contents, so everything is preserved.
    Just about any external drive would work for this purpose--it doesn't necessarily need to be the one that you intend to use as a replacement.
    I agree that we don't really know for certain just what the fault is, but I think a Super Duper copy would be in order no matter how we go about doing the troubleshooting.

  • Hard drive crash in G4 - won't boot from 2nd hard drive

    Hi,
    My G4 has 3 internal hard drives: 2 on the ATA bus and one on a SCSI card. The main drive crashed yesterday. At least I assume it crashed: the first error was not being able to store a CD imported into iTunes, followed by a system crash and a request to restart. On restart it failed to boot, showing a floppy icon with a ? and repeatedly beeps twice. In an attempt to fix this I booted from my OS X software install CD and installed OS X on other ATA hard drive, however it refuses to boot from the second drive and shows a broken folder icon and is still doing the double beep thing. All suggestions gratefully received!
    Thanks,
    Andy

    I do indeed. Here's what happened when I ran the extended test:
    No Airport present. Logic board, mass storage and RAM all passed. I couldn't see if the modem test completed, but somewhere between the end of that and the video RAM test the screen was filled with a multi-coloured grid. Eventually there was a default catch:
    code=300, %SRR0: 00000020, %SRR1:00081010
    with the option of mac-boot or shut-down.
    mac-boot also caused a default catch:
    code=900, %SRR0: 01c10ffc, %SRR1:00003030
    mac-boot then brought an alternate happy mac / folder with a ?
    A reboot from there finally brings up the broken folder. All of these icons are very small OS9 style icons in the centre of the screen.
    Phew!
    Bearing in mind your suggestion about a blown stick, I have tried a swapping out each stick (1x512, 1x256) and rebooting with the same results. I also tried them in different slots and that made no difference either.
    Blown video RAM perhaps?

  • IMac won't boot if external hard drive running Time Machine powered on

    Upon rebooting, my iMac 3.06 GHz Intel Core 2 Duo with 4GB RAM, running OS X 10.5.4, locked up in a gray screen, the "gray screen of death."
    At the recommendation of the Apple Tech Support rep, I turned off the iMac using the power button, and rebooted with my USB and Firewire devices removed.
    The iMac boots fine with everything except my G-tech drive 1GB external hard drive running Time Machine with no partitions, attached using a Firewire 800 cable.
    If the external hard drive is on, I get the interminable gray screen.
    If I boot with the external hard drive powered off and then power it on after I'm at the Mac desktop, the disc image mounts normally on the desktop.
    I've already repaired all disc permissions and it doesn't help.
    My external hard drive has used 907 of the 931 GB true capacity. Supposedly, Time Machine removes the old files to make room for the new files.
    Time Machine itself is running properly once I get my iMac booted in this peculiar way.

    Raja,
    Do a SMC reset perhaps even a couple of times and see if that helps. Also in System Preferences + Startup Disk make sure the internal HD is selected.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Roger

Maybe you are looking for