A4 top and bottom margins too big - Pages 08

I am using the pages 08 in A4 document and the margin setup for the top margin is 0,35cm and bottom margins are 0,85 cm but in the print-out they are 3,5 cm and 4,5 cm. Header and footer are off

Similar problem landscape: two A5 columns on A4. All margins are not the very minimum I arranged for. Left is 6 cm, the other 2 or more cm. This doc printed properly in Pages '06.

Similar Messages

Is it Possible to set Top and Bottom Margin for each section?

I've been googling and haven't found an answer to this problem.
I need to specify a different top and bottom margin for each section in my document. The "document margins" apply to the whole document, so I've set those to a low amount, and I can set the Layout Left and right margins - but the "Layout Margins" do not allow "top and bottom" only "before and after". This is a critical difference, because if you have 2 pages in a section, only the first page gets the "before" margin, and only the 2nd page gets the "after" margin. This is a little odd, and I'm frankly surprised we are in version 4 of this app - and you can't set top and bottom margins for each section.
If you insert a "layout break" on each page, then you can get the margins to reset for each page inside a section, but this is not an acceptable workaround as I need to setup templates for staff to use that will "flow" like a normal word processor.
Does any one have any suggestions?

On page 49 in the English Guide version it tells you about Lay-out margins. This is the text
*Defining Layout Margins*
*In a word processing document, a layout margin is the space around columns in a*
layout.
*To change the layout margin in a word processing document:*
*1 Click in a column.*
*2 Click Inspector in the toolbar, click the Layout button, and then click Layout.*
*3 To change the outside margins of the column(s), enter values in the Left and Right*
*fields under Layout Margins.*
*4 To specify the amount of space above and below the column(s), enter values in the*
*Before and After fields under Layout Margins.*
*The new margins can’t extend outside the page margins set for the document in the*
*Document inspector.*
I hope this helps.

How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard.

How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard. (I selected 'Fit to scale' and there's a huge gap on the top and bottom).

Those margins are usually reported from the printer settings to Acrobat. Meansif you have, for example, an inkjet printer and that printer can not print seamlessly, then there will be a minimum margin.
Check your printer's page settings.

I uploaded a photo onto my desk top and it was too big when I tried to change it I couldn't get into iPhoto it just wouldn't open

I uploaded a photo to my desk top as my screen saver and it was too big, when I tried to get back into iPhoto I couldnt, it wouldn't open, I closed it and tried again and it still will not open, can you help me?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Top and bottom margins to be inside the frame and form should less cluster

Hi All,
In my application we have created nearly 10 regions and for each region i have created sub regions with No templates. Here are the deatils below.
I need to display two regions side by side with borders, so what i have done is
1. Created a region as #Region Start with No template with Display point as "Page template body (1. items below region content) and Header and footer i have
given as <table border="1"><tr><td>
2. Followed by region as #What with Wizard region as "Page template body(1. items below region content) and nothing given under header and fotter.
3. Followed by reagion as #Region Middle with No template with Display point as "Page template body (1. items below region content) and Header and footer i
have as </td><td>
4. Followed by region as #where with Wizard region as "Page template body(1. items below region content) and nothing given under header and fotter.
5. Folowed by region as #Region End with No template with Display point as "Page template body (1. items below region content) and Header and footer i have
given as </td></tr><tr><td>
Simiallry followed by rest of regions by creating dummy regions and placing the <tr> and <td> in Header and Footer.
Now users are asking me to have insde the frame and form shoul dbe less cluster.
Can suggestiosn on this who we need to achieve.
Thanks,
Anoo..

'File' > 'Page Setup' is used to alter the page margins when you need to print the email. It is not used to create a Template email nor to change the overall theme used in the Thunderbird user interface.
To add a theme to the overall Thunderbird window, you can choose
* either a Windows theme via Control Panel > Personalization >Theme
* or download a theme Add-on, there is a huge range here: https://addons.mozilla.org/en-US/thunderbird/themes/
such as : https://addons.mozilla.org/en-US/thunderbird/addon/balloons/?src=ss
If you are looking to create a Template email, then you open a new Write message, design the email, enter a Subject so that you can easily locate the email and click on 'File > Save as > Template or click on Save button and choose 'Template' from the options. then the email is saved in the Templates folder. To use, you click on Templates folder and double click on the email to open in a new Write message. then compose and send as normal. The original email will be saved in Templates folder for reuse.

Flash page: need to 'pin' top and left perhaps too...see

Dear Experts,
Thank for reading this.
http://maharishihoney.safire.com/
in the above page it is behaving just like wanted, EXCEPT want the top and left side (perhaps) to be 'pinned', meaning when resizing the browser window, the top does not disappear. I like that it resizes, and scales, yet, keeps the whole viewport filled. Don't like that it can disappear at the top if the browser window isnt just right.
What do you think?
Any ideas? Appreciate so much your thots.
Warmly with thanks,
Hope

Ok, thanks again for reading...
additional note: Am using cs3 and so far using as2
To achieve as seen in above link: in dreamweaver set the w and h to 100% , plus setting the margin to 0 for height, width, top, bottom, plus set ' scale' to 'noscale.
Then have also tried (not in link above) setting the publish settings to 100% for w and h, the flash does not disappear at the top, but then there is alot of white all the way around at top and bottom even with above mentioned DW settings.
when not setting publish settings to 100% then we get what you see above in the link: it scales very nicely with no white and fills the screen the whole time, BUT it does disappear at the top.
Thanks again for all your attention....
Warmly, Hope
p.s.
2 samples of resizing in flash:
http://www.fidmdigitalarts.com/#/home
http://www.isurfbecause.com

IMovie is outputting my movie with big black bars at top and bottom that I don't want

Quicktime: Ver 10.3
iMovie: Ver 10.0.5
OS: OS X Ver 10.9.4
So, let me try and explain...
I have recorded gameplay footage of my game directly from my Mac screen using Quicktime's Record Screen option. I've tried recording both in fullscreen mode (with my game also running in fullscreen mode) and a section of the screen by dragging the mouse to select a 640X960 box (with my game running in windowed mode which is displayed at 640x960 resolution).
This initial recording direct from the screen displays fine, both when I view it in windowed mode and when I view it fullscreen, with the height of the game stretching to the full height of the video area but obviously with big black borders to either side in fullscreen mode (as it's basically iPhone ratio in portrait mode).
WindowedFullscreen
This ^^^ is how they should look.
The problem is when I try to import the movie into iMovie, mess around with some fade-ins and music and stuff and then output the edited movie via iMovie...
When I then try to view this outputted movie in windowed mode on certain sites (Kickstarter) my game footage doesn't take up the full height of the video and instead floats in the middle with big black bars at the top and bottom, which I don't want. It's fine when I go fullscreen but the problem is that when I load this video into Kickstarter it shows the non-fullscreen view of the video with this big black border and it looks really amateur.
This is what Kickstarter shows in windowed mode i.e. the way you see Kickstarter videos by default when you press Play; unless I go fullscreen and then it takes up the full heigh of the view.
Note: Windowed mode actually looks fine when viewed directly on my Mac but I know it's not Kickstarter that is causing the issue because I can see in the thumbnail preview on my Mac that the video is somehow encoded with the big black bars at the top and bottom. Also, I uploaded the unedited videos to Kickstarter just to check and they display fine. So it's definitely iMovie that is adding these annoying black borders at the top and bottom for whatever reason (and I'm not intentionally scaling the video down in iMove or anything like that as far as I know). I also can't use the unedited footage however because it has no sound and no transitions etc.
Does anyone know what night be causing this and how to get rid of it.

You are lucky to see anything - iMovie 5 is not really compatible with Snow Leopard, which only supports iMovie 6 and above.
Snow Leopard only runs on Intel Macs. iMovie 5 was never written, AFAIK, for Intel, just for the PPC Macs they had in those old days!

Anyone know of a way to adjust the top and side MARGINS of a document printed from iOS numbers? The default margins are too wide. Need more working space.

Anyone know of a way to adjust the top and side MARGINS of a document printed from iOS numbers? The default margins are too wide. Need more working space.

Open the document,
Tap the Tools icon (upper right).
Tap Document Set up.
Drag the margins to the position you wish (the actual margin width sould display as you are doing this).

Top and bottom of FireFox window disappear in seconds (the window expands too far). All other windows operate normally. Now what? I've uninstalled and reinsta

I was using Firefox for a few years with great enjoyment. Recently I opened it and within a second or so, it enlarged to the point that the top and bottom of the screen expanded off the screen. No other windows in any other program are doing this. The only way to close it is by using the task manager. Very frustrated. What other info do you need?

Hi ConnieHampton,
FIrefox will remember the last window size you had, which is why it keeps opening too large each time you open and close it. To fix this, try resetting Firefox: https://support.mozilla.org/en-US/kb/changes-toolbars-and-window-sizes-are-not-saved?esab=a&s=resize+window&r=7&as=s
If you don't see your menu bar, you may be in full screen mode, and can turn it off by following these instructions: https://support.mozilla.org/en-US/kb/how-make-firefox-and-websites-go-full-screen?esab=a&s=full+screen&r=0&as=s
If this doesn't work, please let us know and we'll figure out another way to fix it.

IWeb not publishing edited "top" and "bottom" page backgrounds

I have edited the page background for the "Layered Paper" theme to fit an 800px space (up from 700px). The backgrounds display correctly in iWeb, but in Safari, only the middle image is the correct 800px format. The top and bottom both display the old 700px image as a "tile."
I have emptied Safari's cache and deleted the original 700px images from the iWeb theme folder. This also occurs under IE8. Any ideas?
site: carl.stoneh.am

Yes. I edited those files directly (after backing up the originals in case something went wrong).
I did discover a tutorial online that suggested just dragging the "new" header footer into iWeb, so I tried that out. If you visit the "CV" age, you'll see that the header works just fine (I left the footer alone for testing purposes). I guess that will do as a stopgap, but I'm still curious as to why iWeb used the correct image file in the program but published it to MobileMe using a 700px width. Is this perhaps something that's just hard-coded in the program, and changing the width of a page doesn't "correctly" publish larger images for the header and footer (unless they're just gradients, etc)?

TS3899 I am unable to access my mail account. I press the mail icon, the page refreshes to the mail format page - blue bar top and bottom, white text space in the middle.... and that is as far as it goes. It does not list my email accounts or offer any.

I am unable to access my mail account on my iphone, which I have been able to do previously. I press the mail icon, the page refreshes to the mail format page - blue bar top and bottom, white text space in the middle.... and that is as far as it goes. It does not list my email accounts or offer any.

Close the mail app, double tap the home button and completely close out of the app.
then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

What are the boxes that appear when I scroll over them at the top and bottom of a Pages document, and how do I get rid of them?

While types a blank document on pages, there are "invisible" boxes at the top and bottom of each page, and they only appear when I scroll over them. Does anyone know what these boxes are, and how i can get rid of them from my paper?

Those are the Header and Footer spaces. You remove them using the Document Inspector. Uncheck the "Headers" and "Footers" checkboxes shown checked here:
Regards,
Barry

HT204088 Using my ipad 3, with ios6, I can access the itunes store and the App store when I press the icons, but the viewing pages are blank. I can see the toolbars at the top and bottom. The pages are blank for every tab. Help. The ipad works fine, other

Using my ipad 3, with ios 6.0, I can access the itunes store and app store by pressing the icons, but the screens are all blank pages, I have tool bars at the top and bottom of the viewing screen, but when I touch the individual tabs, the viewing screen is either white or dark grey...nothing else appears. Help.

Having the same issue, can someone please enlighten us?

Set top and bottom inset spacing values in Text Frame Options via jsx script

I am looking for a way to set the top and bottom inset spacing values only to 2 points in Text Frame Options via a .jsx scrpt.
For years, I have used a script that sets Preferences, such as:
with(app.storyPreferences){
    opticalMarginAlignment = false;
    opticalMarginSize = 12;                // pts
I would like to add the code to this same script that would make Top = 0p2 and Bottom 0p2 but leave Left and Right as 0p0.
Any help would be greatly appreciated.

Here is the full .jsx file that we now use to set preferences.
Ideally, this could be modified to include setting any text frame created to have 0p2 inset Top and Bottom, but 0p0 Left and Right:
//ApplicationTextDefaults
//An InDesign CS2 JavaScript
//Sets the application text defaults, which will become the text defaults for all
//new documents. Existing documents will remain unchanged.
with(app.textDefaults){
    alignToBaseline = false;        // align to baseline grid
    try {
//        appliedFont = app.fonts.item("Times New Roman");
        appliedFont = app.fonts.item("Helvetica");
    catch (e) {}
    try {
        fontStyle = "Medium";
    catch (e) {}
    autoleading = 100;
    balanceRaggedLines = false;
    baselineShift = 0;
    capitalization = Capitalization.normal;
    composer = "Adobe Paragraph Composer";
    desiredGlyphScaling = 100;
    desiredLetterSpacing = 0;
    desiredWordSpacing = 100;
    dropCapCharacters = 0;
    if (dropCapCharacters != 0) {
        dropCapLines = 3;
        //Assumes that the application has a default character style named "myDropCap"
        //dropCapStyle = app.characterStyles.item("myDropCap");
    fillColor = app.colors.item("Black");
    fillTint = 100;
    firstLineIndent = "0pt";
//    firstLineIndent = "14pt";
    gridAlignFirstLineOnly = false;
    horizontalScale = 100;
    hyphenateAfterFirst = 3;
    hyphenateBeforeLast = 4;
    hyphenateCapitalizedWords = false;
    hyphenateLadderLimit = 1;
    hyphenateWordsLongerThan = 5;
    hyphenation = true;
    hyphenationZone = "3p";
    hyphenWeight = 9;
    justification = Justification.leftAlign;
    keepAllLinesTogether = false;
    keepLinesTogether = true;
    keepFirstLines = 2;
    keepLastLines = 2;
    keepWithNext = 0;
    kerningMethod = "Optical";
    kerningValue = 0;
    leading = 6.3;
//    leading = 14;
    leftIndent = 0;
    ligatures = true;
    maximumGlyphScaling = 100;
    maximumLetterSpacing = 0;
    maximumWordSpacing = 160;
    minimumGlyphScaling = 100;
    minimumLetterSpacing = 0;
    minimumWordSpacing = 80;
    noBreak = false;
    otfContextualAlternate = true;
    otfDiscretionaryLigature = true;
    otfFigureStyle = OTFFigureStyle.proportionalOldstyle;
    otfFraction = true;
    otfHistorical = true;
    otfOrdinal = false;
    otfSlashedZero = true;
    otfSwash = false;
    otfTitling = false;
    overprintFill = false;
    overprintStroke = false;
    pointSize = 6.3;
//    pointSize = 11;
    position = Position.normal;
    rightIndent = 0;
    ruleAbove = false;
    if(ruleAbove == true){
        ruleAboveColor = app.colors.item("Black");
        ruleAboveGapColor = app.swatches.item("None");
        ruleAboveGapOverprint = false;
        ruleAboveGapTint = 100;
        ruleAboveLeftIndent = 0;
        ruleAboveLineWeight = .25;
        ruleAboveOffset = 14;
        ruleAboveOverprint = false;
        ruleAboveRightIndent = 0;
        ruleAboveTint = 100;
        ruleAboveType = app.strokeStyles.item("Solid");
        ruleAboveWidth = RuleWidth.columnWidth;
    ruleBelow = false;
    if(ruleBelow == true){
        ruleBelowColor = app.colors.item("Black");
        ruleBelowGapColor = app.swatches.item("None");
        ruleBelowGapOverprint = false;
        ruleBelowGapTint = 100;
        ruleBelowLeftIndent = 0;
        ruleBelowLineWeight = .25;
        ruleBelowOffset = 0;
        ruleBelowOverprint = false;
        ruleBelowRightIndent = 0;
        ruleBelowTint = 100;
        ruleBelowType = app.strokeStyles.item("Solid");
        ruleBelowWidth = RuleWidth.columnWidth;
    singleWordJustification = SingleWordJustification.leftAlign;
    skew = 0;
    spaceAfter = 0;
    spaceBefore = 0;
    startParagraph = StartParagraph.anywhere;
    strikeThru = false;
    if(strikeThru == true){
        strikeThroughColor = app.colors.item("Black");
        strikeThroughGapColor = app.swatches.item("None");
        strikeThroughGapOverprint = false;
        strikeThroughGapTint = 100;
        strikeThroughOffset = 3;
        strikeThroughOverprint = false;
        strikeThroughTint = 100;
        strikeThroughType = app.strokeStyles.item("Solid");
        strikeThroughWeight = .25;
    strokeColor = app.swatches.item("None");
    strokeTint = 100;
    strokeWeight = 0;
    tracking = 0;
    underline = false;
    if(underline == true){
        underlineColor = app.colors.item("Black");
        underlineGapColor = app.swatches.item("None");
        underlineGapOverprint = false;
        underlineGapTint = 100;
        underlineOffset = 3;
        underlineOverprint = false;
        underlineTint = 100;
        underlineType = app.strokeStyles.item("Solid");
        underlineWeight = .25
    verticalScale = 100;
//Units & Increments preference panel
//Must do this to make sure our units that we set are in points. The vert and horiz
//units that get set default to the current measurement unit. We set it to points
//so we can be sure of the value. We'll reset it later to the desired setting.
with(app.viewPreferences){
    horizontalMeasurementUnits = MeasurementUnits.points;    // Ruler Units, horizontal
    verticalMeasurementUnits = MeasurementUnits.points;        // Ruler Units, vertical
//General preference panel
with(app.generalPreferences){
    pageNumbering = PageNumberingOptions.section;    // Page Numbering, View
    toolTips = ToolTipOptions.normal;                    // Tool Tips
// Not supported in CS4
//    toolsPalette = ToolsPaletteOptions.doubleColumn;    // Floating Tool Palette
    completeFontDownloadGlyphLimit = 2000;                // Always Subset Fonts...
    try {
        //Wrapped in try/catch in case it is run with CS4 and earlier to avoid the error
        preventSelectingLockedItems = false;                // Needed for CS5+
    catch (e) {}
//Type preference panel
with (app.textEditingPreferences){
    tripleClickSelectsLine = true;    // Triple Click to Select a Line
    smartCutAndPaste = true;        // Adjust Spacing Automatically when Cutting and Pasting Words
    dragAndDropTextInLayout = false;    // Enable in Layout View
    allowDragAndDropTextInStory = true;    // Enable in Story Editor
with(app.textPreferences){
    typographersQuotes = true;            // Use Typographer's Quotes
    useOpticalSize = true;                // Automatically Use Correct Optical Size
    scalingAdjustsText = true;            // Adjust Text Attributes when Scaling
    useParagraphLeading = false;    // Apply Leading to Entire Paragraphs
    linkTextFilesWhenImporting = false;    // Create Links when Placing Text and Spreadsheet Files
// Missing following (Font Preview Size, Past All Information/Text Only)
//Advanced Type preference panel
with(app.textPreferences){
    superscriptSize = 58.3;                // Superscript, size
    superscriptPosition = 33.3;            // Superscript, position
    subscriptSize = 58.3;                // Subscript, size
    subscriptPosition = 33.3;            // Subscript, position
    smallCap = 70;                        // Smallcap
with(app.imePreferences){
    inlineInput = false;                // Use Inline Input for Non-Latin Text
//Composition preference panel
with(app.textPreferences){
    highlightKeeps = false;                    // Keep Violations
    highlightHjViolations = false;            // H&J Violations
    highlightCustomSpacing = false;            // Custom Tracking/Kerning
    highlightSubstitutedFonts = true;    // Substituted Fonts
    highlightSubstitutedGlyphs = false;    // Substituted Glyphs
    justifyTextWraps = false;                // Justify Text Next to an Object
    abutTextToTextWrap = true;                // Skip by Leading
    zOrderTextWrap = false;                    // Text Wrap Only Affects Text Beneath
//Units & Increments preference panel
with(app.viewPreferences){
    rulerOrigin = RulerOrigin.spreadOrigin;                    // Ruler Units, origin
//    These are set at the end of the script after all the changes have been made
//    horizontalMeasurementUnits = MeasurementUnits.points;    // Ruler Units, horizontal
//    verticalMeasurementUnits = MeasurementUnits.inches;        // Ruler Units, vertical
    pointsPerInch = 72;                    // Point/Pica Size, Points/Inch
    cursorKeyIncrement = 1;                // Keyboard Increment, Cursor Key
with(app.textPreferences){
    baselineShiftKeyIncrement = 2;    // Keyboard Increment, Baseline Shift
    leadingKeyIncrement = 2;        // Keyboard Increment, Size/Leading
    kerningKeyIncrement = 20;            // Keyboard Increment, Kerning
//Grids preference panel
with(app.gridPreferences){
    baselineColor = UIColors.lightBlue;    // Baseline Grid, Color
    baselineStart = 48;                        // Baseline Grid, Start
    baselineDivision = 6;                    // Baseline Grid, Increment Every
    baselineViewThreshold = 50;                // Baseline Grid, View Threshold
    baselineGridRelativeOption = BaselineGridRelativeOption.topOfPageOfBaselineGridRelativeOption;    // Baseline Grid, Relative To
    gridColor = UIColors.lightGray;            // Document Grid, Color
    horizontalGridlineDivision = 12;    // Document Grid, Horizontal, Gridline Every
    horizontalGridSubdivision = 12;            // Document Grid, Horizontal, Subdivisions
    verticalGridlineDivision = 12;            // Document Gird, Vertical, Gridline Every
    verticalGridSubdivision = 12;            // Document Grid, Vertical, Subdivisions
    gridsInBack = true;                        // Grids in Back
    documentGridSnapto = false;                // snap to grid or not
    documentGridShown = false;                // show document grid
//Guides & Pasteboard preference panel
with(app.documentPreferences){
    marginGuideColor = UIColors.violet;                // Color, Margins
    columnGuideColor = UIColors.magenta;            // Color, Columns
with(app.pasteboardPreferences){
    bleedGuideColor = UIColors.fiesta;                // Color, Bleed
    slugGuideColor = UIColors.gridBlue;                // Color, Slug
    previewBackgroundColor = UIColors.lightGray;    // Color, Preview Background
    minimumSpaceAboveAndBelow = 72;                    // Minimum Vertical Offset
with(app.viewPreferences){
    guideSnaptoZone = 4;                            // Snap to Zone
with(app.guidePreferences){
    guidesInBack = false;                            // Guides in Back
//Dictionary preference panel
with(app.dictionaryPreferences){
    composition = ComposeUsing.both;    // Hyphenatin Exceptions, Compose Using
    mergeUserDictionary = false;    // Merge User Dictionary into Document
    recomposeWhenChanged = true;    // Recompose All Stories When Modified
// Missing (Lang, Hyph, Spelling, Double Quotes, Single Quotes)
//Spelling preference panel
with(app.spellPreferences){
    checkMisspelledWords = true;                    // Find, Misspelled Words
    checkRepeatedWords = true;                        // Find, Repeated Words
    checkCapitalizedWords = true;                    // Find, Uncapitalized Words
    checkCapitalizedSentences = true;                // Find, Uncapitalized Sentences
    dynamicSpellCheck = true;                        // Enable Dynamic Spelling
    misspelledWordColor = UIColors.red;                // Color, Misspelled Words
    repeatedWordColor = UIColors.green;                // Color, Repeated Words
    uncapitalizedWordColor = UIColors.green;    // Color, Uncapitalized Words
    uncapitalizedSentenceColor = UIColors.green;    // Color, Uncapitalized Sentences
//Autocorrect preference panel
with(app.autoCorrectPreferences){
    autoCorrect = true;                            // Enable Autocorrect
    autoCorrectCapitalizationErrors = false;    // Autocorrect Capitalization
// Missing (Language, Misspelled word pairs)
//Display Performance preference panel
with(app.displayPerformancePreferences){
    defaultDisplaySettings = ViewDisplaySettings.typical;    // Preserve Object-Level
    persistLocalSettings = false;
// Missing (antialiasiing, greek below
//Story Editor Display preference panel
with(app.galleyPreferences){
    textColor = InCopyUIColors.black;                // Text Color
    backgroundColor = InCopyUIColors.white;            // Background
    smoothText = true;                                // Enable Anti-Aliasing
    antiAliasType = AntiAliasType.grayAntialiasing;    // Type
    cursorType = CursorTypes.standardCursor;    // Cursor Type
    blinkCursor = true;                                // Blink
// Missing (Font, Size, Line Spacing & Theme)
//File Handling preference panel
with(app.generalPreferences){
    includePreview = true;                        // Always Save Preview Images with Doc
    previewSize = PreviewSizeOptions.medium;    // Preview Size
with(app.clipboardPreferences){
    preferPDFWhenPasting = false;                // Prefer PDF When Pasting
    copyPDFToClipboard = true;                    // Copy PDF to Clipboard
    preservePdfClipboardAtQuit = false;            // Preserve PDF Data at Quit
// Missing (Enable Version Cue)
//    Optical margin (hanging punctuation, outside margins)
with(app.storyPreferences){
    opticalMarginAlignment = false;
    opticalMarginSize = 12;                // pts
//Wrap Up (do at end of script)
//Units & Increments preference panel
//Must do this to make sure our units that we set are in points. The vert and horiz
//units that get set default to the current measurement unit. We set it to points
//so we can be sure of the value. We'll reset it later to the desired setting.
with(app.viewPreferences){
    horizontalMeasurementUnits = MeasurementUnits.picas;    // Ruler Units, horizontal
    verticalMeasurementUnits = MeasurementUnits.inches;    // Ruler Units, vertical
//    These two flags are turned off to avoid the error message about
//    missing image links when InDesign opens an ad. This can especially
//    be a problem when doing batch processes.
with(app.linkingPreferences){
    checkLinksAtOpen = false;            // checkbox: true/false
    findMissingLinksAtOpen = false;        // checkbox: true/false

Get rid of the white space at the top and bottom of the report when Printing as PDF document

Hello All,
I have a wider tablix report which is 29 inches wide. I have given the paper size as custom and width as 29 and height as 11 in report properties.I have deployed it and saved it as PDF document. When I print preview the report I am using the paper size as
tabloid (17 by 11) and selected the orientation as Landscape. I am getting the full report without any stripping but I am getting some extra space at the top and bottom when I print the report. Can anyone help me how to get rid of this space? . I checked the
margins for the report and it was 0in. Please help.
Thank You

Hi There
In Reporting Services (SSRS 2008), there are white spaces preserved in the report body by default. When the white space extends the body size beyond the width of the report, blank pages will be generated. To avoid the issue, you can set the “ConsumeContainerWhiteSpace”
property of the report to “True”.
Please try to adjust your margins (top + side) and hopefully this problem will get resolved
Body Width <= Page Width - (Left Margin + Right Margin)
Horizontal usable area:
X = Page.Width - (Left Margin + Right Margin + Column Spacing)
Vertical usable area:
Y = Page.Height - (Top Margin + Bottom Margin + Header Height + Footer Height)
Body Width <= Page Width - (Left Margin + Right Margin)
Horizontal usable area:
X = Page.Width - (Left Margin + Right Margin + Column Spacing)
Vertical usable area:
Y = Page.Height - (Top Margin + Bottom Margin + Header Height + Footer Height)
If you have any questions please ask.
Many Thanks
Syed Qazafi Anjum
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.

A4 top and bottom margins too big - Pages 08

Similar Messages

Maybe you are looking for