Abandoned Cart report doesn't show results any more

Does anyone know why the Abandoned Cart report doesn't show results any more? We know we have has some occur in the past.

Hi MandaWeb2,
This was reported as a bug to the dev team. I don't have an ETA for you on when it will be fixed, but it's certainly with them.
Cheers,
-mario

Similar Messages

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

Search in Mail doesn't show results after Migrating

If I search for a word or an adr. in Mail nothing show up. Unless I've just read the mail. Like that newly read email is the only one being searched in ..?
This happened after moving my user account to a new MacPro with Migration Assistant.
(first a clean install of 10.7 on a new disk in bay 1 on the "new" MacPro and updating to 10.7.5 - Starting up from the new disk with my "old" HD in bay 2 on the new machine and using Migration Assistant to move all my data over to the new disk in bay 1)
Same Mac OSX version, but MacPro version from 1.1 to 3.1
Also Spotlight doesn't show results.
Is there a way to make a new "search cache" or whatever that overview file is called ...
Suddenly now, when not getting any search results, I see how much I use search in Mail and Spotlight ... !
Thanks

Try posting this in the 10.7 Mail forum. You'll get more help there.
DALE

Reports doesn't shows horizontal scroll bar after EHP5

Hi All,
After EHP5 SP level, under menu MSS -> My Staff -> Reporting, any reports doesn't shows horizontal scroll bar, to view last colums. I tried with Authroziation SAP ALL but still issue persists.
Thanks,
Cheers!!!
Sara

can you chekc note 1531182
1. Open SAP Note 19466 - "Downloading SAP kernel patches"
2. Follow the instructions on the a above note and implement the Kernel
patches contained on SAP Note 1531182 - "Number of fixed columns is
incorrect"

I downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm

i downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm and fyi i try all the ways to turn it on but it didnt sucsses

roaminggnome
thanks for helping but i didnt know that is the downgrade is forbidden and i ask for help and u didnt help me so i just want to thank u for telling me that is the downgrade is forbidden >>> but now i didnt have i phone any more so thank u so much again >>>>

HT4972 My IPad 2, IPhone 3GS ans iPod no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-startedev

My IPad 2, IPhone 3GS ans iPod no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-started everything.

Ok thank you so much, for your timely response.
RESPONSES:
1)   When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2)   I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3)   So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself.

I put a windows xp cd in my mac book pro and rebooted the mac,mac doesn't start up any more and the cd doesn't come out,what can I do now?

I put a windows xp cd in my macbook pro and rebooted the mac,mac doesn't come up any more and the cd doesn't come out,what can I do now?

Hossein,
As Guido said, you can use BootCamp to partition the drive. If you want to install, or reinstall Windows. You would launch BootCamp and it will actually guide you through the installation, you will only need to decide how large a partition you want. I would use BootCamp, I would not use disk utility. When you have installed Windows and you want to boot into windows, when you start your MBP hold down the option key, this will give you trha option of booting Mac OSX or Windows.
Joseph

My phone was switched off and doesn't turn on any more

my phone was switched off and doesn't turn on any more.

Hold down power button & menu button hold both down until you seethe Apple Logo you will not lose any data.
Bbsydd uk

Monitor Shopping Cart report(BBP_MON_SC) not showing detail Limit carts

Hi All,
We have a problem with Monitor Shopping Cart report(BBP_MON_SC).
This is not showing up the details of Limit cart.
It gives a pop-up which says "No Shopping Carts for your Search Criteria".
We are in SRM 5.0 and ECC as backend.
Any help in this regards is highly appreciated.
Thanks & Regards,
Venkat

Hi
Please go through the pointers ->
Note 972697 bbp_mon_sc: No result for limit shopping cart search
Note 790027
Bugs in BBP_MON_SC
Regards
- Atul

Profit Center Report doesn't show data

Dear Experts,
I've posted some data thru FB50 in FI, with different cost center assignment 1201 and 1202. Both cost centers are assigned to profit centers, YB110 and YB120 respectively in master data.
Then, I tried to run a profit center report, S_ALR_87013326 from Profit Center Accounting (PCA) module but doesn't show any data.
Do I need to do any period-end processing in order to get the data out from PCA report?
By the way, the selection required for plan version, I just keyed in '0'. Not sure of the number, where to find the plan version as I didn't create any plan before this.
regards,
Abraham

Hi
If you see the screen shot I attached, it has the text "(new)" against the Folder name...
All new gl reports are under such a folder to differentiate... You cant deactivate any reports from the Standard Menu... You can just control it by authrization....
You can also ask your BASIS guy to display only the authorized trans on the user screen so that they are not able to see the std set of transactions
Br, Ajay M

After Win 8.1 update - Lenovo System Update defective (doesn't find updates any more)

Lenovo System Update tells me that all is up to date!
I searched at Lenovo for new drivers for windows 8.1
They asked me exactly what notebook I use. For the x1 carbone 3460-4LG (checked 3 times because I couldn't believe it) they discribed my computer as:
i7-3667U(3.2GHz), 4GB RAM, 256GB Solid State Drive, 14in 1600x900 LCD, Intel HD Graphics, Intel 802.11agn wireless, WWAN, 1Gb Ethernet, UltraNav, Secure Chip, 4c Li-Ion, Win8 Pro 64.
My notebook has 8GB RAM, 180GB SSD and (as I believe) no carbone x1 has 1GB Ethernet, because it has no network connector at all!
So first question: can I believe the suggestions of lenovo for new drivers?
There are several drivers released in October 2013 that I surely do not have already installed.
That means, Lenovo System Update doesn't work any more, without error message!
Question two: Has Lenovo a solution to repair their defective updater? Or will they release a solution?
Very disappointed regards.
Alex

Another Workaroung wich could help is the Tool DriverEasy. It does scan yours system and shows you all missing Driver. The missing driver can be downloaded or directly installed.
For me it found every missing Driver on different Lenovo Modells. The only thing to use it as Full Service, is you have to buy it for i think about 30 $.

Leopard 10.5.2: Airport doesn't do DHCP any more!

Hi, I am running Leopard 10.5.2 on my G4 Powerbook (Version 5,6)
At my home wireless network I have been successfully using Airport for 3 years, I but now I have a problem:
My Airport does not connect any more (it did before with 10.5.2) to the Wireless Router (Netgear Wireless ADSL Modem Firewall DG834GB) Router via DHCP - my Airport connection claims to have a self choosen IP with some strange subnetmask (255.255.0.0) and therefore I don't get access to the Internet.
I have checked with another iBook G4 running 10.4.x that everything is working. as expected.
My current solution is to enter a static IP altogether with some DNS-server information like:
192.168.0.4
255.255.255.0
192.168.0.1
and DNS server adresses not shown here from my university
So to sum it up:
my Networking Preference Pa(i)ne claims to have DHCP configured for Airport, but shows a self-chosen IP number with a strange subnet (255.255.0.0).
I only can access the Internet by configuring a manual IP with some extra DNS server addresses.
Any ideas?
Any preference file I should try to trash?
Where can I find the network config files to post them here?
cheers,
akrsten

Thanks for the help and sorry for the delay, been too busy and WIFI still worked, but now I really want to use airdisk and my printer. I resetted multiple times. When I reset, airport utility app detects the airport extreme, but hangs on reading the configuration.
So I switched to a windows laptop and Windows had no trouble finding the airport extreme, nor configuring the airport. I set the channel to 9, but no use. Pretty desperate right now, maybe I should switch to Windows to use apple hardware? Another strange thing is that I have the same problem from Windows on my macbook (running VMWare Fusion). Maybe this is an hardware issue, but I have no problems with WIFI, just with the configuration of my airport extreme.
kind regards,
Pieter
Message was edited by: larrylikesyou

Java 6 doesn't accept enum any more?

This code below worked well in Java 5 (1.5.x) but when I moved to Java 6 (1.6.x) it didn't work any more:
package com.test;
//socket protocol
public enum eSK_ACTION {
     SK_PRESENCE,
     SK_PRESENCE_YES,
     SK_ECHOTEST,
     SK_ECHOANSWER,
     SK_STARTMSG,
     SK_ENDMSG,
     SK_MSGDONE,
     SK_STOP
//end of fileCould you tell me if it's intentional in Java 6, please? And if it's so, please tell me how to use it equivalently in Java 6?
Thanks in advance.

I know, I know. This duplicated post is by accident. I intended to edit the title and posted, but my network is tooooo slow, that I didn't see it's posted. Sorry for that.
Forum's Mod, please delete this thread for me. Thanks!

SAP Business One 8.8. Report doesn't show and workstation doesn't respond.

Hi all,
We have a customer with:
SAP Business One 8.8 (8.80.237) PL: 19 HOTFIX1.
Sql Server 2005
Crystal Reports 12.1.3.1028
We have done some reports wich run under server machine but not under workstation.
Even i've done a dummy report without any data connection and it doesn't run under workstation (server machine works perfectly). This dummy report only show a label with static text "Hola".
We don't receive any error message, SAP Business One client doesn't respond and in task manager you can see "not responding" message.
SAP support connected to our customer installation and they suggested us formatting workstations computers. We did it but the problem persists. Thank you very much for your help.
Kind regards,
Nauzet Díaz

Hi,
In this case, why you not responded to SAP for their suggestion of formatting the workstation?
If you unfortunately closed the old support ticket, then just raise a new support ticket with reference of the old one too.
Regards,
Bala

Reporting doesn't show the newly installed SCOM Agents

Hello,
I am running SCOM 2012 SP1 on Win2008 R2.
I recently deployed scom agent to couple of machines the agents are showing up healthy and i can see the performance and health data from Monitoring tab but when i try to run report i can't find these new agents in the objects to add to report.
Report
it doesn't even query the agents.
and on the SCOM manamgent server i see this error in event viewer not sure if it is related.
Data was written to the Data Warehouse staging area but processing failed on one of the subsequent operations.
Exception 'SqlException': Sql execution failed. Error 2627, Level 14, State 1, Procedure ManagedEntityChange, Line 368, Message: Violation of UNIQUE KEY constraint 'UN_ManagedEntityProperty_ManagedEntityRowIdFromDAteTime'. Cannot insert duplicate key in object
'dbo.ManagedEntityProperty'. The duplicate key value is (528, Aug 25 2013 8:52AM).
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.Synchronization.ManagedEntity
Instance name: 08eb00a2-e227-4472-a368-a6e42a2bc502
Instance ID: {EEFCB078-6517-97CD-FA4F-8FCAB54E4930}
Management group: OPSMGR
Regards,
Maqsood
Maqsood Mohammed Senior Systems Engineer MCITP-Enterprise Admin & ITILv3 Foundation Certified

Ok, so at this point, without enabling logging and going to the extremes, I would attempt an uninstall and reinstall of the agents. One at a time. So remove the agents. Reinstall one, and monitor what is happening on that server, and investagate
it in the ops console.
If you know what applications are on the box, and being discovered, look for the server in discovered inventory for those classes, etc.
Before you do that, you can try to run this against the DW to see if there are any alerts associated with these two servers, that is if they ever raised alerts:
USE OperationsManagerDW
SELECT Alerts.AlertName, SUM(1) AS 'Alert Instances', SUM(Alerts.RepeatCount + 1) AS 'Alert + Repeat Count',
CASE Alerts.MonitorAlertInd WHEN 1 THEN vMonitor.MonitorDefaultName WHEN 0 THEN vRule.RuleDefaultName ELSE 'Not found' END AS 'Rule or Monitor Name',
CASE Alerts.MonitorAlertInd WHEN 1 THEN 'Monitor' WHEN 0 THEN 'Rule' ELSE 'Not Found' END AS 'Rule or Monitor', vManagedEntity.Path,
vManagedEntity.DisplayName
FROM Alert.vAlert AS Alerts INNER JOIN
vManagedEntity ON Alerts.ManagedEntityRowId = vManagedEntity.ManagedEntityRowId LEFT OUTER JOIN
vRule AS vRule ON Alerts.WorkflowRowId = vRule.RuleRowId LEFT OUTER JOIN
vMonitor AS vMonitor ON Alerts.WorkflowRowId = vMonitor.MonitorRowId
WHERE (Alerts.RaisedDateTime BETWEEN DATEADD(day, - 180, GETDATE()) AND GETDATE()) AND
(Alerts.AlertName like '%Hub Servers In Retry Error%') and path like '%servername%'
GROUP BY Alerts.AlertName, Alerts.MonitorAlertInd, vMonitor.MonitorDefaultName, vRule.RuleDefaultName, vManagedEntity.Path, vManagedEntity.DisplayName
ORDER BY 'Alert Instances' DESC
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Abandoned Cart report doesn't show results any more

Similar Messages

Maybe you are looking for