ABAP Application Error in Proxy scenario

Hi All,
I have a Proxy to Proxy scenario. I can see that few message are successful, whereas few are failing in ECC side. The messages are not stuck in Queue. It is giving a "ABAP" _APPLICATION ERROR. Has anyone faced this error before?
Regards,
Lavanya R

Hi,
Issue with Application end, Ask to developer to deebug the codu using the failed xml message.
Regards
srinivas

Similar Messages

Restrict alerts - ABAP application error

Hi,
I need to restrict alerts getting generated for ABAP application error faults. Is there a way to specify exclude these errors in the alert rules or how can i acheive this.
We are having a fault message form ECC, due to application error in ABAP. We do not want an alert raised for this error.
Thanks for the help,
Vinay.

Hello Vinay,
the alert rules defintion is somewhat limited.
You can only specify "include" rules but no "exclude" rules.
It is not possible to specify: "Sent all Alerts, except ECC Application error"
I already have raised this as development request.
The only alternative is to specify a rule for every alert which you do want to receive and leave out the application error (I know, this is not satisfying)
Hope this was helpful.
best regards,
Markus

Handling Application Error in Provider Proxy

Hi
My Asynchronous scenario is as following -->
File --> Sndr File Adapter --> PI --> Rec XI Adapter --> Provider Proxy
In this I am using Fault Message Types to handle any application error like u201CEmployee Number does not existu201D or u201CEmployee Number not providedu201D.
Now when this error will happen I will see checked flag in PI --> SXMB_MONI but I can view these errors in R3 --> SXMB_MONI. I would like to send the Mail of these errors to support group when this happened or would like to create file with these error at some location.
Do I need to use BPM in order to achieve this?
Now what is the best approach to do this:
u2022 Should I ask ABAP programmer to generate the mail with these error.
u2022 Can I associate these errors with Alert Management? If yes, then how.
Pls. let me know if you have handled the Application errors in your scenario (Async Inbound Proxy) using some other method .
Regards
Lalit

you can trigger alert from ABAP program using FM "SALRT_CREATE_API" for these errors

Application ERROR - Fault message Error in Inbound ABAP Proxy !!

Hi Folks,
I have got application error while doing in Inbound proxy scenario. This inbound message is ProductActivityNotification, this message has got fault message. This message is triggering for faults. How to control this fault message or how to divert this error as an alert to RWB. Please give me your ideas step by step. Error as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SAPGlobal20/Global">ProductActivityNotificationFault</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please find the fault message has got following values
<?xml version="1.0" encoding="utf-8" ?>
- <n0:ProductActivityNotificationFault xmlns:n0="http://sap.com/xi/SAPGlobal20/Global" xmlns:prx="urn:sap.com:proxy:RAS:/1SAI/TAS653D9A9CCD9A8EF3AF9B:701:2009/02/10">
- <standard>
<faultText>Proxy Class (Generated)</faultText>
- <faultDetail>
<severity>information</severity>
<text>Start of inbound processing: ProductActivityNotification (ID )</text>
<id>000(/SCA/BIF_PROACT)</id>
</faultDetail>
- <faultDetail>
<severity>error</severity>
<text>Message ID is missing</text>
<id>032(/SCA/BIF_MI)</id>
</faultDetail>
</standard>
</n0:ProductActivityNotificationFault>
Will you please focus bit light on this error message please?
Regards
San

Hi,
Check your Source data is correct or not..beofr executing your scenario execute your inboud Proxy with valid data ,
check below blog...
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
Regards,
Raj

FTP to ABAP Proxy Scenario - getting error CO_TXT_CHANNEL_PASSWORD_ERROR

We have transported PI and EP data from development server to respective production, every thing is running fine except the abap proxy scenarios i.e. PI reads file from ftp location and calls the abap proxy but we are getting following errors:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = FD768D4A8772DB50E1000000AC10041E) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any solution?
Please note that I have searched and applied solutions given on SDN forums but didn't get any success. So I am looking for new suggestions.
Regards,
Jawed Ali

Jawed ,
Please test the HTTP destination of your receiver comm channel.
Which is the RFC connection to your R3 system.
Transaction SM59 and check the logon parameter for the connection you are using.
Regards,

Forwarding Application Error in ABAP Proxy to CCMS

Hi,
We are using fault messages for inbound ABAP proxy interfaces to capture application errors, and we can see the error in the monitoring of ECC. However, Is there a way, we can forward it to CCMS of ECC (and not XI), because we want to use an external tool linked to CCMS via SOLMAN to get alerted in case of application errors.
Best regards,
Rahul Kumar

Is there a way of getting the above thing done? I have a very similar Issue.
Rahul if you have found out a way of doing the same please let me know by email. [email protected]
Thanks,
Karthik

Forwarding ABAP Proxy Application errors to CCMS of ECC

Hi All,
We are using fault messages for inbound ABAP proxy interfaces to capture application errors, and we can see the error in the monitoring of ECC. However, Is there a way, we can forward it to CCMS of ECC (and not XI), because we want to use an external tool linked to CCMS via SOLMAN to get alerted in case of application errors.
thanks,
Karthik

Solved on my own.
If you need information please contact [email protected]

Issue in Iodc- abap proxy scenario

Hi all
I have a idoc to abap proxy scenario. The issue is ,
when we send the idoc to client A of target system, it works ifne.
But when we send the saem mesage to Client B, we find a error message in sxmb_moni of Target system. the mesage is Application_fault.
Is it because of any error in XI configuration or somethin else.

hi all
thanks for all your responses.
I forgot to mention that based on a particualr field value in the idoc , it will be routed to eihter Client 100 or 200 .
I gave the conditions in Receiver Determination.
Same Server Proxy is used in both the target business sytems.
I have done all the Configuration Steps ,( Created two separate business systems also )
Also I have checked wiht all the system settings to be made in the target system B.
When i trigger the idoc to Client 100, it goes to XI and then reaches Client 100 of System B
without any problem. I get the desired result from proxy code.
When i send the saem idoc to Client 200, it reaches the target system and routed to client 200. But getting this error message in
the Call Inbound PRoxy step. (from sxmb_moni)
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
Since it reaches the target system correctly, i guess there is nothing wrong in the XI configuration side.
But if its Application fault, how come the same data is processed successfully in one client whereas it thorws error in another.

Error in FILE 2 Proxy Scenario

Hi All,
I am doing File to Proxy Scenario i am getting following error
Could any one provide the solution for this.
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>MI_Emp_Sender</SAP:P2>
<SAP:P3>Namespace</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message MI_Emp_Sender, request message, namespace )</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Thanks in Advance
Mahesh
</SAP:Error>
Edited by: Mahesh Reddy on Jul 10, 2008 12:47 PM

Hi Mahesh,
1) Use SPROXY transaction.
Menu-> Proxy -> Activate All.
2) check in the interface determination if u are using correct
inbound interface.
3) If this if fine....try deleting all proxy objects of the interface
and create new.
Regards,
Praveen K

File to ABAP Proxy Scenario

Hi All,
I am doing File-to-ABAP Proxy Scenario, in the sender side side it is picking the file, but in sxmb_moni it is giving the error:
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
<SAP:P1>4CFF4691EEE211DC85E30019D1522982</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID 4CFF4691EEE211DC85E30019D1522982 already exists in called system (pipeline CENTRAL)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Can u plz tell me why this error is occurring and how we can resolve this error.
Thanks & Regards,
Vikas

Hi Vikas
make a dummy change and activate your object then make a full refresh
you can make it through in 3 ways
1) tcode SXI_CACHE
2) go to ID -> environment and make a full cache refresh
3) http://<host>:5<sys#>00/CPACache/refresh?mode=full Full CPA cache refresh
when you do the developement then these are stored in ABAP data dictionary table which can be refreshed by delta cache
while full cache will delete this temporary object and make this cahe into runtime
hope this will help you
thanks
sandeep
if helpful reward points

SOAP to Proxy scenario communication error

Hi Friends,
 Now i am developing SOAP to Proxy scenario, i am testing WSDL file using SOAP UI software and i am getting an error in SOAP UI tool.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link {color : #0059AA;}
A:visited {color : #999999;}
A:active {color : #999999;}
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
<td align="left" colspan="2" height="48"> 403 Forbidden</td>
</tr>
<tr bgcolor="#3F73A3">
<td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
<td height="23"><img width=1 height=1 border=0 alt=""></td>
<td align="right" height="23">SAP NetWeaver Application Server </td>
</tr>
<tr bgcolor="#9DCDFD">
<td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
 
 Error: You are not authorized to view the requested resource.
 <a href="https://wiki.sdn.sap.com/wiki/x/wIN3Cw">SAP Technology Troubleshooting Guide</a>
<table>
<tr>
<td valign="top"> Details:</td>
<td valign="top"><PRE>No details available.</PRE></td>
</tr>
</table>
</body>
</html>
I have tried with the same WSDL earlier it was working fine, now its not working and throwing the above error.
Kindly suggest me to overcome from this issue.
Regards,
Senthil.

Hi Senthil,
Try with the authentication preemtive. Also, check your URL because that error seems that you are accessing to wrong PI section or your user has not the enough credentials, try with PIAPPLUSER or with the same roles that this user.
Regards.

Proxy Scenario (abap client)- XI, ICM_CONNECTION_FAILED

Hi Forum,
I have a problem with a Proxy Scenario (ABAP client proxy),
My scenario is R/3 (abap client proxy)--->XI ,
the client proxy while sending message to XI throws an error, which is seen in SXMB_MONI as:
404 Resource not found
Partner not reached
Error: -20
Version: 6040
Component: ICM
Date/Time: Fri Jan 25 09:20:54 2008
Module: icxxconn_mt.c
Line: 2124
Server: xxxap5_RP1_05
Detail: Connection request from (143/22024/0) to host: xxXP1.xxx.com, service: 8000 failed (NIEHOST_UNKNOWN) AP-T143, U22024, 500 xxUSER, , 09:20:54, M0, W0, , 1/0
I can see a stuck entry (LUW), for this in SMQ2, even on several re-execution of that LUW in SMQ2, it gives an error:
SYSFAIL
XI Error Client_Receive_Filaed

Hi
404 Resource not found
There might be the problem with the server having not to find anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
*Possible Tips:- *
404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination
Refer below link
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Thanks
Swarup

INTERNAL - AMF_ERROR in XML -- ABAP proxy scenario

Hi Experts,
Can any one help me to solve this following issue please, it is happening while I am executing the scenario between XML File to ABAP Proxy scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AMF_ERROR</SAP:Code>
<SAP:P1>1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when processing message number 1 in package No object type found for the message. Check that the corresponding process is activated An exception has occurred.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>.
This XML message has got 5 Lines Header and more than 100 Lin Items, this kind of Header and Lin item message 3 to 4 in one XML, I am using multi mapping. Message mapping shows working fine, OM also shows working fine. BPM is splitting messages to send messages to ABAP Proxy on SNC 7.0. After I have done all with SDN experts support, still I am having the above issue. can any one experties might help to resolve this?
I will appreciate your support.
Thanks & Regards
San

Can you please explain the solution.
Regards,
Rashi

HTMLError in sxmb_moni, Idoc to ABAP Proxy Scenario

Hi Friends
I am trying to send data from R3 to SCMTM system(SAP System), via Idoc to ABAP Proxy Scenario ,I am getting the following under HTMLError in sxmb_moni
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Any ideas will be helpful.

Hi,
I faced similar problem. it was due to configuration problem in SXMB_ADM. corss check specific server confiration in SXMB_ADM.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Reyaz

Error in proxy for ABAP

I have created a proxy for a ABAP written by us. It has been created using SAP .Net Connector 2.0.
When I call the method from the proxy using direct reference it returns me the proper data. But when I call the same method in the proxy by using reflection I get the following error "System exception thrown while marshaling .NET type 1 to RFCTYPE_CHAR".
Please help me if anyone has faced the same issue.
Nilesh Deshmukh

Hi Rickrr,
i have get same error in My proxy scenario.But it has resolved.i have check following steps.
1)I have regenarate the proxy in SPROXY and activate the same.
2)Remove the all the Queue objects in SMQ2.
3)Again activate the Queues in SXMB_ADM->Manage Queues->Register Queues->Activate Queues.
After i have done these steps my problem is resolved.
Thanks
Ravi

ABAP Application Error in Proxy scenario

Similar Messages

Maybe you are looking for