Abap client proxy scenario

i am getting an exception in my code(in function i am calling inside my report) while executing my abap report for calling client proxy .
is there any thing by which i can find out where the actual problem is?or any debugging system available or any logging available ?

Hello Rohit,
We faced the similar problem and found a feasible solution to debug.
1. Write a code for an infinite loop in start of your proxy. For ex:
debug = true.
while debug = true.
endwhile.
2. go to sm51 and find your process in all the list of process.
3. select it and from menu, choose debug.
"Reward Point if useful"
Thanks,
Kulwant

Similar Messages

ABAP client proxy to File scenario

Hi,
I am doing ABAP client proxy to File scenario.
I have followed Ravikumar allampallam blog i.e https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1387. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
My abap proxy has successfully created 4 objects:
1)ABAP Class ( ZCO_ MIOA_ABAP_PROXY).
2. Structure for the message type in ABAP Data Dictionary (ZMT_PROXY).
3. Structure for the data type in ABAP Data Dictionary (ZDT_PROXY_SRC).
4) Table type (ZSTRING_TAB).
can u tell me how can i fetch data from database table into structure?

Hi,
see first create the data type,msg type, msg interface and go to R3 instance of Xi and use SPROXY transaction , locate your SWCV,namespace, intreface ( outbound) and create the proxy , later give the name starts with z, later in ABAP program create the internal table of type of the Structure for the message type in ABAP Data Dictionary (ZBLOGEMP_PROFILE_MSG )
so follow the code and explained about each ob, structure of Msg ..
Regards
Chilla

ABAP Client Proxy to SOAP

Hi all,
I am working on ABAP client proxy to SOAP Asynchronous scenario. when iam sending the data from r/3 system data sent to webservice.
but PI sending this same data 3 more to the third parth system. when i checked in runtime workbench it is showing number of retrys 3
how to resolve this issue. please explain in detail
Thanks
Anil

Anil,
That's the default setting for Async SOAP communication...this can occur if the receiver is overloaded and cannot take any more feed and sometimes time out in the middle of the hand off...this would lead to re-try in PI...so you would see 3 entries of same data...refresh or clear the data from the receiver could solve the issue...
Thanks,
Srini
Edited by: Srinivas Davuluri on Sep 9, 2010 1:51 PM

Outbound ABAP Client Proxy

Hi,
Scenario - Client Proxy to JDBC.
I am getting Purchase order details out of Client proxy which goes and updates multiple tables at JDBC. I am doing this via single service interface to update multiple tables ( multiple statement element in JDBC target structure ).
Client Proxy
PO HEADER
PO DETAIL
PO TEXT
PO ITEM
JDBC tables
tbl_HEADER
tbl_DETAIL
tbl_TEXT
tbl_ITEM
Detail and ITEM tables from SAP has too many entries. When I tested in development for 14 PO header it had 1500 detaills, 500 text and 800 items. So i am thinking of breaking down of these PO headers in abap client proxy to trigger the abap proxy for every 50 PO header. So that it would not end up with huge PO details and text.
I am thinking of modifyin the abap code to send 50 PO header each time in client proxy.
loop on PO headers.
if lv_counter is 50.
call method to send via client proxy.
then next 50 records. so that we are sending in chunks.
PI would receive in multiple messages with consisting of 50 PO header and many item details. Does update/insert on JDBC table would affect. what precautions shd i take in PI considering update on JDBC
Kindly suggest with any inputs.
Thanks in advance.

Hi,
You can use the update_insert option of the receiver jdbc canonical structure.
This would ensure that rows already existing would be updated and only the delta would be inserted into the tables.
Regards

Fault message handling in abap client proxy

Hi experts,
i have scenario like this SAPECC---XI---WEBservice
i was decided to using the ABAP CLIENT proxy in sender side and soap adapter communication in receiver side
i will be get the wsdl file form client
problem is i am in bit of confusion like am i need to create fault message for this asychronous scenario?
how can i create the fault message for this scenario(that WSDL) and how the abaperwill handle those error
thanks in advance

Hi.
You can use fault message but it won´t return a error to your ABAP Proxy because your interface is ASSYNC. The fault message generated will stop in Adapter Engine.
If you need a return of the error, you have to change your interface to Sync mode.
To get more information, follow the link below:
Fault Message Type
http://help.sap.com/saphelp_nwpi711/helpdata/en/dd/b7623c6369f454e10000000a114084/frameset.htm
Best Regards.
Bruno

How ABAP Client Proxy works

Hello,
I have one scenario
File Sender Adapter sends file to IDOC Adapter for posting of measurement documents. After posting I need to send back status (success/failure) of measurement documents back to SAP XI.
How can it be done.
Can it be done through ABAP Client Proxy (but how we can trigger report for Abap Proxy for this) . Is there any other solution for it.
regards

Hi Henry
client proxy is used by an application to send messages outside of the system it resides in (normally to the IS in this context).
Client Proxies talks about the implementation of Client Proxy (For the Outbound Interface created during Design time). It also discusses the sending out of Data using Proxies
For more details have alook on these links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3dfac358-0d01-0010-5598-d4900e81a30c
To test a connection - /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Client Proxy - /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm

ABAP Proxies:
/people/sap.user72/blog/2005/12/13/integration-builders-through-proxy-server-part--2
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
ON SDN TV
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=abap%20proxy%20xi&cat=sdn_all&start=11#
Check this document on how to do this (section 3.4):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3dfac358-0d01-0010-5598-d4900e81a30c
Check the blog by Stefan Grube for reference,
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
Thanks !!

Abap client proxy to xi - no data found

Hi experts
I m working on abap client proxy to file scenario where in I m sending data from R/3 system to legacy system via xi , but after doing all the configurations and running the abap program for triggering client proxy , i dont find any data on the receiver side ,
I have activated client proxy as per Vijay Kumaris Blog
I checked sxmb_moni on the R/3 system but shows no data selected , so no question of data being found on xi server ,
i m really sutcked up ....dont know hwat to do , pl help
rgds
mojib

Hi,
Have u used commit work at the end of the code.
Can you please tell me what all configuration u have done.
U have referred the ABAP Proxy configuration:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Refer the below log for Client Proxy -
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Chirag

How to call ABAP client proxy?

Hello,
I am getting confused with ABAP client proxy now.
I've defined a outbound service interface (Message Interface) in PI, based on the service interface I generated the ABAP client proxy in the abap backend system. There are two possible ways to configuration the integration scenario for this interface:
1) use the proxy as web service consumer for scenario like: ws consumer --> PI
2) No web service, just proxy like: Proxy --> PI
Now I've configured a logical port (as default logical port) for scenario 1.
I wrote a ABAP program to call the proxy to send out message to PI. To call the proxy we instantiate the proxy like:
CREATE OBJECT proxy EXPORTING logical_port_name = p_port.
proxy->myOperation( ... ).
Now if I specify the logical_port_name, I think the local IE in the abap system knows to send out the message using web service (scenario 1). However if I do NOT specify logical_port_name, how the local IE knows which way to send out the message? Using web service with the default logica port, or directly post the message to the centrl IE pipeline using the second scenario ?
Anybody can clarify my doubts?
Thanks
Eric

Eric
The answer to your question lies in the method CREATE_FRAMEWORK of class CL_PROXY_FRAMEWORK_OUTBOUND. In this method, you will see method GET_SOAP_APPLICATION of class CL_SRT_LP_MAINTANENCE is checked to see which adapter to use (i.e WS runtime or XI runtime).
Anyway, to give a straight answer to your question, if you maintained an endpoint for your interface in tcode SOAManager, the WS runtime/adapter is used to send the message to Integration server. If there is no endpoint maintained, then it uses the XI runtime (or the traditional proxy adapter).
Now, as far as logical port goes, if you didn't give a value when calling the proxy client class and you didn't maintain an endpoint in SOAManager, then XI runtime is used.
If you didn't pass a value to logical port but you maintained an endpoint which the default logical port, then the same is used and communication happens through WS adapter.
If you didn't pass a value to logical port but you maintained an endpoint and didn't mark the port as default, then a WS runtime exception is raised.
Hope this answers your question. For more information, try to take a look in the classes mentioned above.
KK

Facing problem with SOAMANAGER while working on ABAP Client Proxy

Dear Community Friends & Experts,
I am facing a problem with the SOAMANAGER, I think so. Let me explain you a scenario what I am into:
The scenario is like I need to Push data from BI table to SAP PI. We decided to go using ABAP client proxy as Sender and then will
receive it using FTP adapter to FTP address.
I have created Integration repository design object Data types, Message types, interfaces and mapping. Now I am into SAP BI and running SPROXY and generated proxy for my outbound interface. fine.
Till now its okay.Now I wanna my generated proxy to be available within the SOAMANAGER T-code I am not able to find my proxy in the list.
Can anybody send me detailed steps for outbound proxy to SOAMANAGER for creating local port for proxy. I wanna use proxy with WS adapter.
Second Query:
I need to using RSPC in SAP BI to trigger the proxy what code to write with SAP PI 7.0 version.
Can anybody bring some light to this problem...
<h5>Regards,
Gaurav Patwari </h5>

Dear Experts,
Problem solved, cannot say solved but yes its not required now as I am having Client Proxy call so it will be a native call to XI and which does not need SOAMANAGER things.
Thank you all for taking your time and writing answers.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]
Edited by: GauravPa on Apr 17, 2010 11:32 AM

ABAP Client Proxy to File (File is not getting generated)

Hi All,
I'm trying out a scenario ABAP proxy --> XI --> FILE.
I have followed the given blog to create ABAP client proxy.
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
While executing the ABAP client proxy, the values are properly sent to XI and in the SXMB_MONI the message shows as successful. But the correspoding file is not created.
It seems everything is fine in the receiver adpater(Monitoring) and in the SXMB_MONI also the msg shows successful(receiver side).
The directory path and the corresping file creation parameters also looks fine.
Couldn't figure out what went wrong. Please help me on this.
Thanks,
Ajay.

Hi Smitha,
Please find below the Call Adapter trace
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external =</Trace>
<Trace level="1" type="T">Sender agency external =</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.0</Trace>
<Trace level="2" type="T">Host = iscsapapp4w:8010</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.0</Trace>
<Trace level="2" type="T">Remote address = 10.191.117.166</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = NW2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0000</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0000</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = NW2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - ACN_LEGACY2_04_BS</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) ACN_LEGACY2_04_BS MI_Client_Proxy_Inbound</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_Client_Proxy_Inbound</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOM2__0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = NW2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping is already determined in the interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 791955998E03380CA938A0130A348AFB</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 3475AE80930811DAA18DC14C0ABF75A6</Trace>
<Trace level="1" type="T">Interface Mapping http://accenture.com/xi101/ABAPclientProxy IM_Valuemapping</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_Valuemapping_</Trace>
<Trace level="3" type="T">Dynamic configuration is empty</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_Valuemapping_.</Trace>
<Trace level="3" type="T">Load 3475ae80-9308-11da-a18d-c14c0abf75a6, http://accenture.com/xi101/ABAPclientProxy, -1, com/sap/xi/tf/_MM_Valuemapping_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_Valuemapping_.class (http://accenture.com/xi101/ABAPclientProxy, -1) in swcv 3475ae80-9308-11da-a18d-c14c0abf75a6.</Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_Valuemapping_</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_Valuemapping_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_Valuemapping_ completed. (executeStep() of com.sap.xi.tf._MM_Valuemapping_</Trace>
<Trace level="3" type="T">Dynamic configuration is empty</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
<Trace level="2" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
<Trace level="2" type="T">-ACN_Sender_BS_XI</Trace>
<Trace level="2" type="T">-ACN_LEGACY2_04_BS</Trace>
<Trace level="2" type="T">http://accenture.com/xi101/ABAPclientProxy.MI_Client_Proxy_Inbound</Trace>
<Trace level="2" type="T">Channel found: - ACN_LEGACY2_04_BS - ValueMap_Repl_Receiver1</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: File</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET): af.nw2.iscsapapp4w</Trace>
<Trace level="3" type="T">URL = http://iscsapapp4w.idcsap.com:51000/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = XIISUSER</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:19Z CET End of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Thanks,
Jothivel.

ABAP client proxy send message fialed

I developed one ABAP client proxy to send msg. status in SXMB_MONI is error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
After I test it in RWB,I'm sure that IR and ID is right. Then what's wrong?

> There are two scenarios with the same outbound interface.Is it the problem?
>
> ABAP proxy send message, and then there are two route.
Yes this could be the reason, because at the time of Receiver Determination it tries to send the message to both the interface. Are both the scenario Proxy to XI??
Try to change the Message Interface in IR and accordingly change in ID also and then try.
Regards,
Sarvesh
Edited by: Sarvesh Singh on Oct 17, 2008 2:24 PM

ABAP Client proxy message not reaching AAE

Hi Experts,
I am facing a strange issue in one of my proxy interfaces. ABAP client Proxy is used to post message to AAE in SAP PI 7.3. The messages are being generated and pushed out of ECC successfully. I can see them in the SXMB_MONI t-code with checkered flag. These messages are reaching the Integartion Engine instaed of the Adapter Engine.
I have configured the following:
1. Sender / Receiver ID in SXMSIF:
2. Configured the corresponding Runtime parameter in SXMB_ADM
I have few other such ABAp client proxy i/f's which work fine and their message are being sent to the Adapter engine. Howveere, only this one interface is posing a problem. What can be the issue?
Please advice.
Thanks in advance.
Elizabeth.

Hi Elizabeth,
It will be great if you could please let me know all the user profile configured in userID of Logon&Security tab of SM59 for connecting ECC system to post the message via AAE.
I have used
SAP_XI_APPL_SERV_USER
SAP_XI_DEVELOPER_J2EE and
SAP_XI_IS_SERV_USER
profiles in my UserID for Basic authentication.
Currently I am doing the same scenario what you have done with integrated configuration.The message is getting failed in ECC with 403 Forbidden error.
Please help me.
Thanks
Ray...

Async ABAP Client Proxy Queuing

Hi all,
We've successfully set up an asynchronous ABAP client proxy on a WAS 6.20 instance to connect to our XI 3.0 box. Our concern is if XI is down the messages won't get queued up for delivery. As I understand it, failed messages won't get queued up for delivery if a delivery error occurs. Is this correct? If queuing is not possible with a standard WAS 6.20 installation, what options do we have to make queuing possible?
Many thanks,
--jtb

I believe queuing should be supported on a WAS 6.20 system so long as you have installed APPINT 200_620 (XI 2.0 add-on), SL 6. You need level 6 in order to communicate with XI 3.0 (or at least that's how I understand it). This above mentioned add-on is a basically the ABAP side of a 2.0 integration server. In our scenario we set the role of the business with the 2.0 add-on as an application server.

ABAP client Proxy authentication required

Hallo, my problem is about ABAP client Proxy authentication.
Scenario:
Our Dev. BW MWDCLNT600 queries forward a (RetailPro) database (JDBC Receiver C.Channel), by Dev. XI , in order to "drive" data extraction (realized, backward, from RetailPro to BW).
Forward communication from BW uses a call on ABAP Client Proxy technology (I mean, a BW class implements an XI outbound Message Interface).
Problem:
Something changed, we don't know what or where, and since last week everytime you execute the report (F8) you are prompted for an authentication popup.
Official manual guide is: (ABAP Proxy Generation)
http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
in which you have to manage the 2 properties for credential supplying:
com.sap.aii.applicationsystem.serviceuser.name
com.sap.aii.applicationsystem.serviceuser.pwd
in order to "drive" authentication to Integration Engine.
In our scenario, ABAP report ZRTP_FLOW_CONTROL drives data extraction query, by a call to execute method
of class: ZCO_MI_FLOW_CONTROL_OB
which implements Outbound MI: MI_Flow_Control_OB (...all in SPROXY).
In SXMB_ADM, XI IEngine URL is correct...
In Exchange Profile, the 2 properties (see above) are correctly maintained (user: XIAPPLUSER, and password is OK)
Any suggestion?
Thanks all in advance!
Gianluca

Hi
I would like to suggest you to change the password in http destination (sm59) configured to comunicate with XI and put another one using UPPER case only. Another thing to check is tx SLDAPICUST. There is a problem in this transaction (I think it is a problem, maybe it's a feature , you need to use password with UPPER there to, and you need to double save the data there (change something, click save, change another thing, click save, and will work, otherwise not). Check tx SLDCHECK to see if connection with SLD and Integration Directory are ok.
Regards.
Roberti

ABAP Client Proxy Testing process

In case of the Abap server proxy by using this report program SPRX_TEST_INBOUND we can test by providing the Generated interface name and method name.
same like any Testing process is there for ABAP Client Proxy
please respond me.
IF possible provide some Mail Path for ABAP Client ans Server Proxy so i can refer.
I get a one good scenario in www.****************
file to ABAPproxy.

Hi,
For ABAP cllent proxy you need to develope your own ABAP code.
Please fidn here with the below link. Here you will get the testing ABAP code also
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Use this kind of coding for abap client proxy
*& Report ZBLOG_ABAP_PROXY
REPORT zblog_abap_proxy.
DATA prxy TYPE REF TO zblogco_proxy_interface_ob.
CREATE OBJECT prxy.
DATA it TYPE zblogemp_profile_msg.
TRY.
    it-emp_profile_msg-emp_name = 'Sravya'.
    it-emp_profile_msg-empno = '80101'.
    it-emp_profile_msg-DEPARTMENT_NAME = 'NetWeaver'.
    CALL METHOD prxy->execute_asynchronous
      EXPORTING
        output = it.
     commit work
CATCH cx_ai_system_fault .
    DATA fault TYPE REF TO cx_ai_system_fault .
    CREATE OBJECT fault.
    WRITE :/ fault->errortext.
ENDTRY.
Thanks
swarup

Abap client proxy scenario

Similar Messages

Maybe you are looking for