ABAP List formats to cater for both A4 and Letter environments

We have an environment where now both Letter and A4 stationery is used.  Where can we get ABAP list formats for the Letter stationery and should we define them separately e.g. X_65_80 and X_65_80_LTR?
Secondly what is the transaction path for copying and modifying ABAP list formats?

Hi
  You cann;t change the font size thru report.
Go for either Script/smartform for the same.
Regards,
Sreeram

Similar Messages

  • International SSRS report printing for both A4 and Letter

    I've been reading a few articles on the net about making reports either A4 or Letter and I am aware of how to change the layout of the page to be specific for either
    The problem we have is that we have some users that use A4 paper, and other users that use Letter size paper.
    We would ideally like the user to press the print button from the browser window (note not exported to PDF) and for the report to be printed off on their favourite printer
    We have modified the layout to be the lowerst common denominator size (210mm x 279mm).  When we print to our printer which uses A4 paper, it errors because the paper size is odd and needs confirmation to use A4 instead.  I am making the assumption
    that using a printer with Letter size has the same problem.
    We do not want our users to have to deal with errors on their printer every time they try to print a report, it doesn't look good.  We don't want to write 2 versions of each of our reports as that will be time consuming and a maintenance nightmare
    Has anyone managed to make SSRS reports printer agnostic or at least be able to print out on either A4 or Letter without additional intervention on the printer?
    Tony

    Hi Tony,
    What version of SSRS are you using? Are you seeing this from the Report Viewer control or Report Manager?
    In my Report Manager, when I try to print a report (SSRS 2008 R2), the Layout defaults to Letter. When I look at the report (RDL) property in BIDS, the PageSize property is set to 8.5in (Width), 11in (Height), which refers to PageWidth and PageHeight respectively.
    The following blog explains these properties:
    http://blogs.msdn.com/b/bwelcker/archive/2005/08/19/alien-lanes-_2800_logical-and-physical-pagination-rules_2900_.aspx
    In SSRS 2005, for the Report Viewer control, due to a VS 2005 issue, we had a situation where it would not allow custom paper size. By modifying the report page size to the exact Letter size (279.4mm = 11 inches), for example, we would be able to see the
    Letter size in that situation. This should be fixed on and after SSRS 2005 SP2.
    In general, after rendering a report, Reporting Services sends the height and width information to the printer driver when we try to print a report, which selects the appropriate paper type based on the report size.
    In my test, when I tried to print, it chose Letter with Portrait Orientation. I was able to change it to A5 from the Print Dialog and was able to print in both ways (A5/Letter) without any error message.
    Thanks,
    Cathy Miller
    Microsoft Online Community Support

  • Can I format a disc for both Mac and Windows?

    Thank you for looking.
    I'd like to format an external drive to use between osx and win xp.
    Thank you again.

    Use the MS-DOS option in Disk utility or format it as FAT-32 on the PC.

  • Creating one design for both A4 and Letter Sizes

    Hi There!
    I'm new to the forum. I've been tasked with creating individual catalogue pages for a global company. Some divisions in the US use 'Letter' and here in the UK we use 'A4'.
    I was wondering if there's a way of creating a one page design - say in A4 - that when exported as PDF will print to both page sizes? I wondered if I could set the print settings in advance so the page automatically prints to fit page? Unfortunately haven't been able to find any advice on this.
    Any other suggestions would be very much appreciated.
    Hayley

    The answer is that the same page can be printed, scaled, in both formats, but it won't be pretty if you do it that way. In CS6 you can create an Alternate Layout in the same document so that you have both page sizes and can adjust the layout to fit the differnt shapes, then choose which to output. You can use Linked Stories so that you only need to edit one and the other will update.

  • Print preview in abap list format (OMLV) - Need preview in graphical format

    Dear All
    I am facing a problem with the print preview. (transaction code OMLV)
    When i am clicking on print preview button the system is displaying the output in a ABAP list format.
    and also the printout shows only the ABAP content.
    Pl. advise on how to view the print preview in a graphical format and not in the ABAP list format and pl. let me know the setting to print the spool in the graphical format.
    Thanks,
    Maxx

    Hi,
    this problem is not only related to warehouse. even the print preview spool for GR/GI slip in t-code SP01 shows as ABAP list and not as graphical screen.
    my question is why does the system shows the print preview for spool as an ABAP list instead of graphical view.
    pl. advise
    Thanks,
    Maxx

  • I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

    I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
    Thanks

    You are mixing up a couple of things here.
    The TC drive cannot be partitioned without removing it.. did you do that?
    If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
    You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
    There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
    Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
    Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
    You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

  • I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Element

    I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.

    How did you try to install ACR 8.8.  The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
    There are two charts supplied by Adobe that explain your RAW dilemma.  This one tells you what your camera needs:  http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html   This one tells you what version of software you need:  http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6.  (Congratulations on buying a new camera!)
    To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13.   Adobe caps ACR updates on version 12 at 8.5.
    The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter.  Download and install it from here for FREE:  http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890  Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use.  That includes old versions of Photoshop, Elements and Lightroom.  DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless.  There is no risk of any image quality degradation or RAW functionality.

  • Print preview in abap list format

    Dear All
    I am facing a problem with the print preview.
    When i am clicking on print preview button the system is displaying the output in a abap list format.
    but when i m taking the print it is coming correctly.
    The out put format is different in the print preview where as when i am taking the output it is coming correctly.
    Pls help me out on this.

    Please check this answered link:
    Invoice print preview defaults to ABAP List View

  • ABAP List Format

    Hi,
    Any documentation about ALF (ABAP List format) ? Especially ALF specifications?
    Thanks

    Please check this answered link:
    Invoice print preview defaults to ABAP List View

  • Data Doubler - Format for both OSX and Windows 7 to read/write?

    Hello! I have a Mid-2012 MacBook Pro 13" and I've ordered the OWC Data Doubler with a 1.5TB HDD to put into the optical bay. I have a couple of questions.
    1. What format should I use for the HDD to allow both my OSX and Windows 7 sides read and write to it? I have a Bootcamp partition, but if it's possible I'd like for both OSX and W7 to be able to read and write to this drive. That way, when I'm in OSX I can view iTunes and media, but if I'm in W7 I can still have the same access. That way, I don't have to worry about "Oh, I downloaded this on the windows side ... I have to figure out how to get it over to the mac side" (or vice versa). Essentially allowing the 1.5TB HDD to be a "go between" for the two.
    2. This is a minor question, but will the eject button do something to the HDD if it gets pressed when the optical drive is out and the HDD/Data Doubler is in? I don't plan on pressing it, but I was wondering if I need to dig into terminal (or somewhere else) to "disable" the button or maybe just reassign it so that instead of ejecting it does some other function?
    I have heard of "MacDrives" for Windows, but I haven't used it. If this is a better option (to put the HDD into Mac OS Extended Journaled and use an application to allow W7 to read/write) that's fine.
    I am putting in the 1.5TB HDD. The end goal, if possible, is to allow the Windows 7 side to read/write to it. As long as it's not a "hacked together" method, I do not mind what way it's done.
    Any thoughts? I appreciate it!

    Use Winclone for the Windows partition and CCC for the OSX partition.

  • External hard drive for both windows and mac

    hello, all - just bought a western digital 500gb my book premium edition external hard drive. will be using for both pc and macbook, not necessarily to share files (though i may on occasion), but rather as a backup. been researching the discussion boards and concluded that i should use it as pre-formatted fat32. few questions...
    1) if i do use to share files, from what i understand i will be able to read windows files with my mac but i can't read mac files with windows (unless i have macdrive installed). is this correct?
    2) since mac can read/write to fat 32, is it necessary to partition the drives and keep the files separated? i talked to a "computer guy" earlier today and he said i should consider having two completely separate external hard drives as having files from two different operating systems on the same drive could cause major problems for both... i didn't really believe him.
    3) i have seen different posts stating using fat32 format for mac limits file size to 4gb. another post said 32gb. which is right? i have os is 10.4.7 if that makes a difference.
    thanks in advance for any insight.

    2 - i don't mind partitioning at all. but he strongly suggested not even partitioning but using two completely separate hard drives. yeah, the 500gb was a bit overkill, so if i can use it for both as opposed to one and buying an additional, i'd rather.
    2/3 - if i partition, is it best to divide it into ntfs and hfs+? or should i keep the pc portion fat32? if the mac portion is hfs+, can i store any size file? i have videos that are anywhere from 10-20gb, and i'd like to get them off my computer and into the external drive.
    thanks.

  • PGI for both main and sub items (Sales BOM)

    Hello SD friends,
    I'm trying to map some BOM scenario.
    Only main item should be relevant for princing.
    Here's what I've done :
    1. Create sales BOM via CS01
    2. Maintain item category group ERLA for main item and NORM for sub item MM01
    3. Maintain item category TAQ for main item and TAE for sub item VOV4
    When I wanna do PGI, system creates material document only for main item.
    Which means that PGI has not been done for sub items.
    Is there any way to make PGI possible for both main and sub items ??
    Regards,
    Bahia.

    Can you clear, that why you want to issue both Main item/Sub Item, where your pricing is @ main item level.
    in Main item level Pricing, Main item itself includes components. Once you issue the main item. from Inventory this main item wil be reduced.
    Eg:  In Case of Main Item- Computer (Assume Components - Monitor , Keyboard , CPU & Mouse)
    Price for Computer - $1200.   Component prices individually- $300 , $100, $700, $100 - These prices applicable only when you sell as BOM at Subitem level Pricing Or Seperately )-
    In SO: - Order Computer (System explodes Components to verify,which are the subitems consists in Main Item)
      DEL:-  Components will be copied in Delivery , but not for dispatch (Sch Line Cat:CT has these controls)
    Inv: Only Main item will be displayed for print.
    NOTE:  for your requirement, you can change the Schline Category from CT - CN- which is relevant for delivery with movement type i601 -in SO. Then you can dispatch components & these components will not copied into Invoice ,as they are not relevant for billing.
    If you want CN has to determined automatically, maintain Schline Category determination accordingly.
    Hope it helps,
    Any info, please revert

  • I have a datetime axis stuck on 1970  for both min and max..

    I have a datetime axis stuck on 1970 for both min and max..
    The lineseries dataprovider has an array collection with objects
    with each object having a dateAdded2 attribute of format mm/dd/yyyy
    and the dates are in this year 2008. the objects also have an
    attribute called amount which is a number.
    eg
    object.dateAdded2 = "07/14/2008"
    object.amount =5
    Anyone with any idea what is going wrong? Similar type of
    data works fine in my other charts.

    Pull the CPU cover and look for leaks from the LCS.
    If the gray mat is wet, the LCS has leaked and the machine will soon be dead.
    PowerMac G5 Coolant Leaks/Repairs
    PowerMac G5 Coolant Leak Repair/Overhaul (w/photos)

  • Updated 2.3.3 for both x10i and x10a (ALL KITS)

    Updated 2.3.3 for both x10i and x10a (ALL KITS)
    http://www.topsony.com/forum/local_links.php?catid=4556
    download FlashTool
    http://forum.xda-developers.com/showthread.php?t=920746
    or
    http://androxyde.github.com/Flashtool/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)
    Solved!
    Go to Solution.

    this is how to add more Internal Memory it's a long process but its worth it
    1) backup everything (Check above)
    2) backup your SD card
    on your PC
    1) open any folder -> click on tools -> properties -> view -> show hidden files
    2) mount the SD card, go to your SD card, press Ctrl + A then Ctrl C, on your desktop create a new folder, open it, then press CTRL + V
    now this is where it gets AWEOME-ER
    Guide to using Link2SD on your Xperia smartphone
    This guide may seem lengthy, but trust us when we say it is straightforward. All steps have been documented which makes it look daunting. Read each section carefully and follow the steps outlined to install Link2SD.
    1. PREPARATION
    Please make sure you have completed all of the following before starting the tutorial.
    On your PC:
    – Install the necessary drivers for your Xperia smartphone onto your PC/laptop. The easiest way to do this is to ensure that Sony Ericsson PC Companion is installed on your PC. Once installed, connect your phone to complete the process.
    – Download and install MiniTool Partition Wizard onto your PC or laptop.
    On your Xperia:
    – Enable USB de-bugging mode: Setting –> Applications –> Development –> Tick ‘USB debugging’
    – Enable the ability to install unknown apps: Setting –> Applications –> Tick ‘Unknown sources’
    – Install Link2SD from Android Market onto your Xperia smartphone. It is a free download.
    2. ROOT
    3. BACKUP MEMORY CARD
    As we will be creating a partition on your microSD memory card, make sure you create a backup just in case anything goes wrong.
    a) Create a new folder on your PC and name it anything you want, such as ‘SD_Backup’
    b) Connect your phone to the PC, navigate to your memory card and copy the contents to the backup folder.
    4. CREATE SECONDARY PARTITION
    You now need to create a secondary partition on your microSD memory card that will enable you to use Link2SD.
    Note: We will use MiniTool Partition Wizard to create a secondary partition on your microSD card. This partition can be ext2, ext3, ext4 or FAT32. We will use FAT32 as it is supported on all phones and should lead to less troubleshooting later. You can use any partition manager of your choosing, but the steps below guide you through MiniTool Partition Wizard.
    There is no need to wipe your memory card when going through this process, just ensure you have at least 0.5GB to 1.0GB of free space to make it worthwhile. You also do not need to use a microSD card adaptor as the process below creates the partition whilst the phone is connected to your PC.
    a) Connect your handset to the PC via USB and then launch MiniTool. You should see the details pop up under ‘Disk 2′.
    b) Click on the memory card under Disk 2 in MiniTool and then in the left pane, press ‘Move/Resize Partition’. On the blue bar under ‘Size and Location’, move the right arrow towards the left to create the size of the secondary partition desired. In the example below we created a secondary partition with 1018.63MB of space. This value can also be typed in manually in ‘Unallocate Space After’.
    c) Once this is done you should see that your memory card is now split into two partitions under Disk 2 of MiniTool. Right click this new partition and then press ‘Create’.
    If you see this pop-up below, just press ‘Yes’ to continue.
    d) You should then see this ‘Create New Partition’ window. Under ‘Create As’ click Primary and then under ‘File System’ click FAT32. Leave the cluster size as default and you can assign whichever drive letter you want. Once finished press OK.
    e) This should bring you back to the main MiniTool screen. Now hit the ‘Apply’ button on the top-left of the screen, denoted by a tick symbol.
    This will bring up another pop-up window and will take several minutes to both resize and create the secondary partition.
    If successful, you should see message below. Congratulations your card is ready to use in conjunction with Link2SD.
    5. LINK2SD
    This application makes it easy for users with root privileges on their phone to move applications to the SD card.
    a) Open the Link2SD app on your phone. You should be greeted with the following menu, check the FAT32 option and click OK.
    You will then see the Superuser Request, click ‘Allow’.
    Once you see the following message, restart your phone. The app should now be ready to use.
    b) To make sure everything is installed correctly. Click the Menu button and go to ‘Storage Info’. This will show you the internal memory and your two partitions on the memory card. In our case, you can see that the second partition has 1GB free.
    c) Now you need to move the apps of your choice to the memory card. Click the Menu button and press ‘Multi-select’.
    Choose which apps you want to move by clicking the tick box next to the app. System apps are greyed out and cannot be selected. Link2SD can only move apps that are already on the internal memory. If you have apps already on your SD card, you will need to move them back to the internal memory before you can link them with Link2SD.
    If you want to move all of your apps, pressing the menu button will bring up another menu allowing you to do this.
    d) Once you have chosen which apps you want to move, you then need to hit the menu button and press ‘Actions’, which will bring up the following menu. Press ‘Create Link’.
    Leave all three check boxes ticked and press OK. Link2SD will now do its work and move/link the selected apps to your memory card.
    Once finished, you should see that the apps you have moved have ‘Linked -> SD Card’ in red font in the Link2SD app list. Reboot your phone.
    e) Congratulations your phone is now using Link2SD! You should now go to Settings by pressing the menu button and configure how you would like Link2SD to work. The main decision here is whether you want to Auto Link newly installed apps to the memory card. Given that you’ve gone through the hassle of installing Link2SD we suggest you enable Auto Link and make worrying about your internal memory a thing of the past.
    Special Thanx to the Xperiablog
    http://www.xperiablog.net/2011/12/12/link2sd-guide-never-worry-about-internal-memory-limits-again/

  • HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

    I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

    Hi Jamesdwills,
    Welcome to the Support Communities!
    If you are using the same Apple ID on both devices, the Game Center profile should be the same.
    Check out this information from the iPad User Guide.  Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
    Using Game Center
    http://support.apple.com/kb/ht4314
    Game Center settings - iPad User Guide
    http://help.apple.com/ipad/7/#/iPad9a13d039
    Game Center settings
    Go to Settings > Game Center, where you can:
    Sign out (tap your Apple ID)
    Allow invites
    Let nearby players find you
    Edit your Game Center profile (tap your nickname)
    Get friend recommendations from Contacts or Facebook
    Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
    Change restrictions for Game Center. Go to Settings > General > Restrictions.
    Cheers,
    - Judy

Maybe you are looking for

  • Can't see files on a network Hard Drive

    So I have a new airport extreme and I wanted to put a drive on the network. I have two HDDs: one is the time machine that I normally have connected to my computer and another is a Hitachi that I just have Movies on. Both of them will show up under th

  • Send pdf email attachment

    Hi, I m running the custom concurrent program through pl-sql code and sending the output of the same conc program on to the email id of vendor. When i was tryng to send the output in text file it was allowing me to send the text message as well as at

  • QT Pro not playing new MPEG 2

    I just created a new MPEG 2 file and QT Pro gives me a "Error -2048" when trying to play it. However, it does play my older MPEG 2 videos. Any ideas?

  • My MacBook Pro is running slow lately

    I notice it particularly when I'm working in iPhoto.  It lags terribly while I'm looking at pictures.  I have over 10,000 pics on my computer.  I don't have any idea if this is too many.  I also notice it when playing games.  Here is my report from E

  • Problem with configuration settings.

    I have a Nokia 3110 classic .Recently I had a problem with Personal Configuration settings . When I want to add new App types it displays "Cannot add new account.Memory Full." So I also cannot be able to save Configuration settings as it displays"Onl