ABAP Proxy Error - Integration Builder address not maintained

I intend to use ABAP proxy between R/3 (ECC 6.0) and XI (PI 7.0).
On configuring the relevant connections, I run SPROXY and get the following error:
Integration Builder address is not maintained in the Exchange profile (Connections)
I have created the connx LCRSAPRFC & SAPSLDAPI from R/3 to PI but the connectivity does not work.
On running the reports
SPROX_CHECK_IFR_RESPONSE
SPROX_CHECK_HTTP_COMMUNICATION
SPROX_CHECK_IFR_ADDRESS
SPROX_CHECK_IFR_CONNECTION
My question is:
What is the Program to be used in LCRSAPRFC & SAPSLDAPI? I have used LCRSAPRFC_<sys id of XI server>
and SAPSLDAPI_<sys id of XI server>
Should the XI Integration Builder address be maintained in R/3?
If yes, is there any place where IB address can be maintained in R/3 (I believe there is no such thing as exchange profile in R/3. then how can IB address be maintained in R/3??...pls correct if I am wrong)
If IB address of XI has to be maintained in R/3 then can anyone pls tell me how to do it?

Just recheck the steps with this and come up with doubts then
How do you activate ABAP Proxies?
Regards,
Prateek

Similar Messages

  • Integration Builder address not maintained

    When I go to https://<servername>:port/exchangeProfile
    I don't see any setting, anybody who can help me,
    Thanks
    Jagraj Dhillon

    Hi Peter,
    1) Were you able to open in exchange profile?
    To findout, try the following URL
    http://<hostname>:<port>/exchangeProfile
    2) Make sure to check connection parameters in Exchange Profile and the following values are set
    com.sap.aii.connect.repository.name
    com.sap.aii.connect.repository.httpport
    3)Make sure your J2EE server is running. You can find out by going to the URL http://hostname:50000.
    Also complete all your post installation activities.
    Hope this helps.
    Rgds,
    Sam Raju

  • Intigration builder address not maintained error

    Hi All,
      While accessing intigration builder in ECC5, i am getting the following error.
    "Intigration Builder address not maintened"
      Along with this error teh following directory was opened automatically..
    "C:\Documents and Settings\sundaramj\SapWorkDir"
    can any one provide solution for this problem?
    regards,
    sundaramj

    Hi,
    Are you getting this error in the Browser ?
    These blogs will help you on the logon issuses-
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    /people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
    Integration Builder Address not maintained
    REgards,
    Moorthy

  • Logon Error Message - Enterprise Services Builder address not maintained

    Hi Experts,
    I'm about to start the configuration on PI PROD (PI 7.1) server, but I keep encountering an error, saying "Service cannot be reached"
    Service cannot be reached
    What has happened?
    URL http://hostname:port/nwa call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system PIP with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If it is a valid URL, check whether service /nwa is active in transaction SICF.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:XXXXX_PIP_00-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team
    What's more weird is that I can't launch sxmb_ifr because 'Enterprise Services Builder address not maintained'.
    I already made some RFC Destination such as AI_DIRECTORY_JCOSERVER, AI_RUNTIME_JCOSERVER, LCRSAPRFC, and SAPSLDAPI and when I test the connection, here's the error message said 'Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67'
    Thanks for the reply.

    Hello,
    Check if you have more than one system. If so, check whether host, port and URL of startpage are maintained on the correct one.
    Also, please follow the MANUAL steps of the SAP Help link below:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
    Ensure you have created the RFC Destinations in the ABAP and Java Environment
    You need to create the following RFC destinations in transaction SM59
    (ABAP) and the Visual Administrator (Java):
    AI_RUNTIME_JCOSERVER
    AI_DIRECTORY_JCOSERVER
    LCRSAPRFC
    SAPSLDAPI
    Last, please check whether, In tcode SM59, the destination INTEGRATION_DIRECTORY_HMI.
    The user maintained in the Logon tab should be PIISUSER
    and ensure he password is correct,and check if the destination will test successfully.
    All of those will solve this issue
    Regards,
    Caio Cagnani

  • Error: Integration Builder can not start

    Hi,
    Before installing SP 12 XI worked fine.
    But while deploying with the SDM I got an error when I want to deploy this file "SAPXITOOL12P_5-20000274.SCA".
    So when I start the intergration Builder, Web Start shows an error like "Integration Builder can not start?
    Can anybody help me??
    Thanks.
    Regards
    Stefan

    Hi Shravan,
    it is a really big one:
    Starting Deployment of com.sap.xi.rwb
    Aborted: development component 'com.sap.xi.rwb'/'sap.com'/'SAP
    AG'/'3.0.1220050720142859.0000':
    Caught exception during application deployment from SAP J2EE Engine's
    deploy service:
    java.rmi.RemoteException: Cannot deploy application
    sap.com/com.sap.xi.rwb.. Reason: Errors while
    compiling:D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:13:
    com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 is not abstract
    and does not override abstract method getLoggingAttributes
    (java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
    public class MessageMonitoringObjectImpl10 extends
    com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
    implements MessageMonitoring {
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1112: setRwb(boolean) in
    com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
    setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
    method does not throw
    com.sap.aii.mdt.api.exceptions.OperationFailedException
    public void setRwb(boolean arg1) throws java.rmi.RemoteException
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:412: setDomain(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
    setDomain(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
    throw com.sap.aii.mdt.api.exceptions.OperationFailedException
    public void setDomain(java.lang.String arg1) throws
    java.rmi.RemoteException
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:740: getMessageData(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
    (java.lang.String,boolean)
    result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).getMessageData( arg1, arg2);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:786: cannot resolve symbol
    symbol : method getMessageList ()
    location: class
    com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).getMessageList();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1092: getLoggingAttributes(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
    (java.lang.String,boolean)
    result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).getLoggingAttributes( arg1, arg2);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1217: cannot resolve symbol
    symbol : method hasVersions ()
    location: class
    com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).hasVersions();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1259: cannot resolve symbol
    symbol : method getMessageVersions (java.lang.String,boolean)
    location: class
    com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).getMessageVersions( arg1, arg2);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1305: cannot resolve symbol
    symbol : method getPureMessageList ()
    location: class
    com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).getPureMessageList();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1350: cannot resolve symbol
    symbol : method getVersionDetailsUrl (java.lang.String)
    location: class
    com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).getVersionDetailsUrl( arg1);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1392: cannot resolve symbol
    symbol : method getFeedback ()
    location: class
    com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).getFeedback();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1432: cannot resolve symbol
    symbol : method setMaxMessages (int)
    location: class
    com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).setMaxMessages( arg1);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationEngineHomeImpl10.java:11:
    com.sap.aii.mdt.server.IntegrationEngineHomeImpl10 is not abstract and
    does not override abstract method create() in
    com.sap.aii.mdt.server.MessageMonitoringHome
    public class IntegrationEngineHomeImpl10 extends
    com.sap.engine.services.ejb.session.EJBHomeImpl implements
    IntegrationEngineHome {
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:13:
    com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 is not abstract
    and does not override abstract method getLoggingAttributes
    (java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
    public class MessageMonitoringObjectImpl11 extends
    com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
    implements MessageMonitoring {
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1112: setRwb(boolean) in
    com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
    setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
    method does not throw
    com.sap.aii.mdt.api.exceptions.OperationFailedException
    public void setRwb(boolean arg1) throws java.rmi.RemoteException
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:412: setDomain(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
    setDomain(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
    throw com.sap.aii.mdt.api.exceptions.OperationFailedException
    public void setDomain(java.lang.String arg1) throws
    java.rmi.RemoteException
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:740: getMessageData(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
    (java.lang.String,boolean)
    result = ((IntegrationServerMonitoringBean)ctx.getInstance
    ()).getMessageData( arg1, arg2);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:786: cannot resolve symbol
    symbol : method getMessageList ()
    location: class
    com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
    ()).getMessageList();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1092: getLoggingAttributes(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
    (java.lang.String,boolean)
    result = ((IntegrationServerMonitoringBean)ctx.getInstance
    ()).getLoggingAttributes( arg1, arg2);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1217: cannot resolve symbol
    symbol : method hasVersions ()
    location: class
    com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
    ()).hasVersions();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1305: cannot resolve symbol
    symbol : method getPureMessageList ()
    location: class
    com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
    ()).getPureMessageList();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1392: cannot resolve symbol
    symbol : method getFeedback ()
    location: class
    com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
    ()).getFeedback();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1432: cannot resolve symbol
    symbol : method setMaxMessages (int)
    location: class
    com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean ((IntegrationServerMonitoringBean)ctx.getInstance
    ()).setMaxMessages( arg1);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationServerHomeImpl10.java:11:
    com.sap.aii.mdt.server.IntegrationServerHomeImpl10 is not abstract and
    does not override abstract method create() in
    com.sap.aii.mdt.server.MessageMonitoringHome
    public class IntegrationServerHomeImpl10 extends
    com.sap.engine.services.ejb.session.EJBHomeImpl implements
    IntegrationServerHome {
    ^
    24 errors
    ; nested exception is:
    com.sap.engine.services.ejb.exceptions.deployment.EJBFileGenerat
    ionException: Errors while
    compiling:D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:13:
    com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 is not abstract
    and does not override abstract method getLoggingAttributes
    (java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
    public class MessageMonitoringObjectImpl10 extends
    com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
    implements MessageMonitoring {
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1112: setRwb(boolean) in
    com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
    setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
    method does not throw
    com.sap.aii.mdt.api.exceptions.OperationFailedException
    public void setRwb(boolean arg1) throws java.rmi.RemoteException
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:412: setDomain(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
    setDomain(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
    throw com.sap.aii.mdt.api.exceptions.OperationFailedException
    public void setDomain(java.lang.String arg1) throws
    java.rmi.RemoteException
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:740: getMessageData(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
    (java.lang.String,boolean)
    result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).getMessageData( arg1, arg2);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:786: cannot resolve symbol
    symbol : method getMessageList ()
    location: class
    com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).getMessageList();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1092: getLoggingAttributes(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
    (java.lang.String,boolean)
    result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).getLoggingAttributes( arg1, arg2);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1217: cannot resolve symbol
    symbol : method hasVersions ()
    location: class
    com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).hasVersions();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1259: cannot resolve symbol
    symbol : method getMessageVersions (java.lang.String,boolean)
    location: class
    com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).getMessageVersions( arg1, arg2);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1305: cannot resolve symbol
    symbol : method getPureMessageList ()
    location: class
    com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).getPureMessageList();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1350: cannot resolve symbol
    symbol : method getVersionDetailsUrl (java.lang.String)
    location: class
    com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).getVersionDetailsUrl( arg1);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1392: cannot resolve symbol
    symbol : method getFeedback ()
    location: class
    com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).getFeedback();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1432: cannot resolve symbol
    symbol : method setMaxMessages (int)
    location: class
    com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean ((IntegrationEngineMonitoringBean)ctx.getInstance
    ()).setMaxMessages( arg1);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationEngineHomeImpl10.java:11:
    com.sap.aii.mdt.server.IntegrationEngineHomeImpl10 is not abstract and
    does not override abstract method create() in
    com.sap.aii.mdt.server.MessageMonitoringHome
    public class IntegrationEngineHomeImpl10 extends
    com.sap.engine.services.ejb.session.EJBHomeImpl implements
    IntegrationEngineHome {
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:13:
    com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 is not abstract
    and does not override abstract method getLoggingAttributes
    (java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
    public class MessageMonitoringObjectImpl11 extends
    com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
    implements MessageMonitoring {
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1112: setRwb(boolean) in
    com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
    setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
    method does not throw
    com.sap.aii.mdt.api.exceptions.OperationFailedException
    public void setRwb(boolean arg1) throws java.rmi.RemoteException
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:412: setDomain(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
    setDomain(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
    throw com.sap.aii.mdt.api.exceptions.OperationFailedException
    public void setDomain(java.lang.String arg1) throws
    java.rmi.RemoteException
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:740: getMessageData(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
    (java.lang.String,boolean)
    result = ((IntegrationServerMonitoringBean)ctx.getInstance
    ()).getMessageData( arg1, arg2);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:786: cannot resolve symbol
    symbol : method getMessageList ()
    location: class
    com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
    ()).getMessageList();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1092: getLoggingAttributes(java.lang.String) in
    com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
    (java.lang.String,boolean)
    result = ((IntegrationServerMonitoringBean)ctx.getInstance
    ()).getLoggingAttributes( arg1, arg2);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1217: cannot resolve symbol
    symbol : method hasVersions ()
    location: class
    com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
    ()).hasVersions();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1305: cannot resolve symbol
    symbol : method getPureMessageList ()
    location: class
    com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
    ()).getPureMessageList();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1392: cannot resolve symbol
    symbol : method getFeedback ()
    location: class
    com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
    ()).getFeedback();
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1432: cannot resolve symbol
    symbol : method setMaxMessages (int)
    location: class
    com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean ((IntegrationServerMonitoringBean)ctx.getInstance
    ()).setMaxMessages( arg1);
    ^
    D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationServerHomeImpl10.java:11:
    com.sap.aii.mdt.server.IntegrationServerHomeImpl10 is not abstract and
    does not override abstract method create() in
    com.sap.aii.mdt.server.MessageMonitoringHome
    public class IntegrationServerHomeImpl10 extends
    com.sap.engine.services.ejb.session.EJBHomeImpl implements
    IntegrationServerHome {
    ^
    24 errors
    (message ID:
    com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment of com.sap.xi.rwb finished with Error (Duration 12172 ms)
    Can you help me??
    Thanks
    Regards
    Stefan

  • SPORXY Integration Builder data not understood

    Hello everybody,
    I want to connect a 6.20 System to our XI 7.0 (SP13). The Integration Engine in the 6.20 is maintained correctly (Application System, Destination works), the sldcheck works fine.
    I use the table SPROXSET instead  of the exchangeprofile. The profile is empty, the SPROXSET has an valid entry (IFR_ADDRESS: http://systemDNSName:57000/rep).
    The SPROX_CHECK_HTTP_COMMUNICATION says: HTTP communication functioning
    But the test  =>Check with report SPROX_CHECK_IFR_RESPONSE and  ==>Check with report SPROX_CHECK_IFR_CONNECTION both show the failure: Integration Builder data not understood
    Normally I connect 6.40 Systems to the XI, they work without a problem. Is there something special with 6.20 Systems?
    Regards,
    Thomas
    Edited by: Thomas Weinschenk on Apr 1, 2008 10:04 AM

    The Add-On is isntalled.
    I found out something else. When I try the Connection Test No.3 - SPROX_CHECK_IFR_RESPONSE (in the SPROXY), the IE opens the following Url:
    http://myHost:57000/rep/ifraccess?service=query&type=namespace
    and I get a HTTP 404 Error. What is the correct Adress here?
    Regards,
    Thomas
    Edited by: Thomas Weinschenk on Apr 4, 2008 4:49 PM

  • Integration Builder data not understood - Problem

    Hi all,
    i have a problem with XI.
    I want to generate Proxies from XI Content in a SAP System.
    in SPROXY i can't see any data from the repository.
    SLDCHECK runs successfully.
    If i run SPROX_CHECK_IFR_CONNECTION i get the failure message "Integration Builder data not understood".  I have already changed all passwords for the service users in XI and Exchange Profile.
    can you give me a hint what the problem could be ?
    br,
    martin

    Hi martin,
    Make sure your business system is set up as follows:
    1. Transaction SXMB_ADM
    - Role of System: Application System
    - Corresponding Integration Server:
    dest://<your_sm59_http_destination>
    2. Ensure that the RFC destinations LCRSAPRFC and SAPSLDAPI are
    maintained and working
    3. Run SLDCHECK to verify that the connection to the System Landscape
    Directory works.
    4. Check that the Integration Repository is running and data is maintained there.
    check out the 18th page of this link
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
    Message was edited by:
            MANIKANDAN subash chandran
    Message was edited by:
            MANIKANDAN subash chandran

  • Getting error logical file name not maintained adequtely

    Hi,
    when i execute a z report and press the download botton getting error logical file name not maintained adequtely,see long text.
    Below code i wriien. Please somebody help..
        DATA: lt_rows TYPE lvc_t_row.
        CASE e_ucomm.
          WHEN 'DOWNL'.
    Determine and construct OS specific file name                        *
            PERFORM get_file_name_for_os.
    in the  above perform , i wriien
    FORM build_file_name USING pf_os
                               pf_with_file_extension
                               pf_param_1
                               pf_format
                               pf_fname.
      DATA: lf_para1(20) TYPE c.
    pf_param_1 hold the materialnr with leading zeros not prefered in    *
    download file name                                                   *
      WRITE pf_param_1 TO lf_para1.
      CALL FUNCTION 'FILE_GET_NAME'
        EXPORTING
      CLIENT                        = SY-MANDT
          logical_filename              = 'Z_MATERIAL_BOM_FILE'
          operating_system              = pf_os
          parameter_1                   = lf_para1
      PARAMETER_2                   = ' '
      PARAMETER_3                   = ' '
      USE_PRESENTATION_SERVER       = ' '
          with_file_extension           = pf_with_file_extension
      USE_BUFFER                    = ' '
        IMPORTING
      EMERGENCY_FLAG                =
        file_format                   = pf_format
        file_name                     = pf_fname
    EXCEPTIONS
       file_not_found                = 1
       OTHERS                        = 2
    Error handling.
      CASE sy-subrc.
        WHEN '1'.
          MESSAGE e014(ba) WITH 'Z_MATERIAL_BOM_FILE'.                     "error message i am getting      LEAVE.
        WHEN '2'.
          MESSAGE e213(ky) WITH 'Z_MATERIAL_BOM_FILE'.
          LEAVE.
      ENDCASE.

    Hi.
    In file txn,
    click on "Logical File Name Definition, Cross-Client" from the left.
    Then click position and check for your logical file name.
    If you dont get it, it means you need to create it. You can click on New Entries to create.
    Thanks
    Mani

  • Legal Error: Partner Function Mapping not Maintained

    Hello SD Gurus,
    When i create a order and save, i get this pop-up (but i can save the order if i click ok)...
    the pop-up is:
    <u>Legal Error: Partner Function Mapping not Maintained</u>
    Can someone explain why is this appearing and how to correct this?
    Thanks in advance,
    Regards
    Jag

    Hi
    Go to transaction VOPA and maintain partner determination
    In the customer master , VD01 maintain partners for this customer for whom you are creating the sales order
    Hope this helps
    Cheers
    N Ganesh

  • Please Help PI Data Dependent Integration Builder Authorizations NOT Workng

    Dear Friends / Experts,
    I had spend many days and explored all Weblog  and links on this website and implemented all the steps required to acheive Data Dependent Integration Builder Security and I am not successful so far. I am just giving up now - Please Help Me ---
    As I said, I already read all the important Forum Links and SAP Web links and Followed Each and Every Step - service.sap.com/instguidesNW04 ® Installation ® SAP XI
    Security Requirement - Data Dependent/Object Level Authorizations in XI / PI
    In distributed teams or in a shared PI environment it might be necessary to limit authorization for a developer or a group of developers to only one Software Component or objects within a Software Component or to specific Configuration Objects.
    Our Environment - PI 7.0 SP 16
    Created a new role in the Integration Builder Design
    u2013Add Object Types of any Software Component and Namespace
    - Enable usage of Integration Builder roles in Exchange Profile
    Integration Builder u2013Integration Builder RepositoryParameter com.sap.aii.util.server.auth.activation to true
    Assign users to the newly created Integration Builder roles
    u2013Create dummy roles in Web AS ABAP, these roles are then available as groups in Web AS Java
    u2013Assign users to these roles
    u2013Assign the Integration Builder roles to the above groups in Web AS Java
    u2013Assign unrestricted roles to Super Users
    Please help - How to validate whether Data Dependent Authorizations are Activated?
    I am working with XI Developers and Basis Team and we did updated all the Required Exchange profile parameters.
    Per this Document - User Authorizations in Integration Builder Tools - Do we need to update the server.lockauth.activation in Exchange Profile. When We updated, It removed Edit Access from all XI Developers in PI
    In both the Integration Repository and the Integration Directory, you can define more detailed authorizations that restrict access to design and configuration objects.
    In both tools, you define such authorizations by choosing Tools ® User Roles from the menu bar. The authorization for this menu option is provided by role SAP_XI_ADMINISTRATOR_J2EE. Of course, this role should only be granted to a very restricted number of administrators. To activate these more detailed authorizations, you must set exchange profile parameter com.sap.aii.ib.server.lockauth.activation to true.
    The access authorizations themselves can be defined at the object-type level only (possibly restricted by a selection path), where you can specify each access action either individually as Create, Modify, or Delete for each object type, or as an overall access granting all three access actions.
    http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/frameset.htm
    I was able to control display and maintain access from ABAP Roles, but completely failed to implement Integration Builder Security?
    Are there any ways to check Whether Data Dependent authorization or J2EE Authorizations are activated?
    Thanks a lot
    Satish

    Hello,
    so to give you status of our issue.
    We were able to export missing business component .
    But we also exported some interfaces after that and we had some return code 8, due  to objects still present in change list on quality system (seems after previous failed transports , the change list was not cleared completley...).
    So now we have checked that no objects is present in the change list of quality system and we plan to export again our devs on quality system.
    Hope after that no more return code 8 during imports and all devs transported correctly on quality system.
    Also recommending to read that, which is pretty good.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7078566c-72e0-2e10-2b8a-e10fcf8e1a3d?overridelayout=t…
    Thanks all,
    S.N

  • [MESSAGE.GENERAL] How can take the actual error text for ABAP proxy error?

    Hi...
    I'm a ABAPer.
    I got to create outbound abap proxy for synchronous server proxy and described below.
    My problem is program can not catch the actual error message when occurred error during send data to XI.
    The return message is just 'MESSAGE.GENERAL'.
    But according to the XI part, 'Key error' is actual reason.
    So... how can i take the actual error text like 'Key error'?
    <b>* Only MESSAGE.GENERAL is return message for all kind of errors.</b>
    Thanks.
    Below----
      TRY.
          CREATE OBJECT abap_proxy.
          CALL METHOD abap_proxy->execute_synchronous
            EXPORTING
              output = gs_out
            IMPORTING
              input  = gs_in.
      Exception Handling
    <b>    CATCH cx_ai_system_fault  INTO  go_sys_exception.
          g_sys_result = go_sys_exception->get_text( ).</b>
        CATCH cx_ai_application_fault INTO go_app_exception.
          g_app_result = go_app_exception->get_text( ).
      ENDTRY.
      COMMIT WORK.
    Return status 'D' is succeeded.
      if  gs_in-sales_group_rer_sap-xstat <> 'D'. 
         WRITE:/ 'System Error Message      :', g_sys_result.
         WRITE:/ 'Application Error Message :', g_app_result.
      endif.
    *--Result--
    System Error Message      : MESSAGE.GENERAL
    Application Error Message :
    Message was edited by: Miju cho
    Message was edited by: Miju cho

    Thanks guys, this was useful.
    My scenario is for Asynchronous communication.
    I guess Fault messages are used in case of Synchronous communication for handling application errors. So if there was something wrong at the JDBC end then I could use the fault messages.
    Have i got this right?
    I also came across this piece on Acknowledgements. But is says that they can be used with the following Receivers:
    The following receivers support acknowledgments:
    ABAP and Java proxies (XI 3.0 SP1 for the latter)
    Integration processes
    IDocs (note that IDocs only return acknowledgments when they have been configured using the ALE audit)
    Receiver adapters support system acknowledgments but not application acknowledgments
    My Receiver is JDBC. So I guess I cannot use acknowledgements either.
    Hence, I need to know what I can do to replicate the system errors eg. failed server etc...so that I can get catch these errors during sending.
    I'll tell you abt what happened earlier.
    My XI server was down. I executed the code for the sender ABAP Proxy and it did not catch the error. In SXMB_MONI in the R/3 system, I could see the messages queued up. When the XI server started, the messages were transferred to XI.
    I need to handle such errors...ie. If  the server is down or message did not reach XI then my ABAP program that sends data via ABAP proxy needs to know that something went wrong.
    Thanks and Regards,
    Ashwin

  • Integration builder can not start up after sp9 to sp15 upgrade

    ID cann't start up, but IR can.
    java web start error is :
    can;t download  http://sp001:50000/dir/directory/iaik_jsse.jar
    I have tried re-Initialization but not work.

    hi
    ref this
          Java Web Start
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
    Unable to open IR/ESR/ID ? (XI/PI/PI 7.1) [Updated for PI 7.1 support]
    XI Integration Builder run on top of Javau2122 Web Start 1.4.2, which is part of J2SE 1.4.2.
    You need to download Javau2122 WebStart 1.4.2
    Troubleshooting:
    Probably Javau2122 WebStart does not detect the correct Proxy Settings .
    This could be set to None or to specific for values HTTP Proxy and HTTP Port .
    Contact your network administrator for the correct settings.
    To change the Proxy Settings:
    Select Windows Start menu -> All Programs -> Java Web Start -> Java Web Start
    Choose File -> Preferences -> General
    Choose None to switch off the proxy settings or Manual to set the HTTP Proxy and HTTP Port.
    ChooseOK
    Close Javau2122 Webstart

  • ABAP Proxy: Error calling Proxy

    Hi guys,
    Here I am with another amazing mistake.....
    After searching the forum, reading some suggestions, notes, I'm a little bit lost on how to figure out what is wrong...
    I've created a receiver ABAP Proxy. XI should call this proxy and receive the consequent response.....
    I've tested the ABAP Proxy, everything is working fine...I've encountered some errors but was able to bypass them... But this one is getting hard...I've found one or two similar threads, or with the same error description but I had no luck in overcoming the error....
    So, what is the problem....:
    When XI is calling the ABAP Proxy I get:
    <SAP:Category>XIServer</SAP:Category>
    <SAP:Code area="INTERNAL">EXCHANGE_PROFILE_ACCESS</SAP:Code>
    <SAP:Stack>Error while reading exchange profile for system DEV and client 100</SAP:Stack>
    I've searched the exchange profile but everything seems ok...
    The user has all (and more) the authorizations needed....
    Can you guys give me some hints? Or suggest any attempt....?

    Kumar,
    as I said before, in SPROXY i can test the interface with no errors....
    In the Application System the sldcheck returns no errors and the RFC Destinations return no errors on the connection tests...
    I really can't understand what this problem might be...
    Problem solved
    What was it? Well, I'm really not sure...Like most of the threads related to this topic it's quite an awkward problem....I've tested some RFC connections which were created, changed some parameters, restarted the system and voila....
    Thanks
    Message was edited by:
            Gonçalo Mouro Vaz

  • ABAP Proxy error during runtime but success for manuall test ?

    Hi,
    I got scenario using inbound ABAP proxy. The problem is when i test the inbound proxy manually, it was sucessfully, but then if i run directly from sender got problem :
    Error during proxy processing An exception with the type CX_SY_DYN_CALL_ILLEGAL_TYPE occurred, but was neither handled locally, nor declared in a RAISING clause The function call of ZPSCD_CTRACCOMOBJECT_CREA failed; a field may have been assigned to the parameter ZCOM_COMPDHDR whose type is not compatible with this parameter
    Please help
    Regards

    Fernand,
    As stated in the exception, there is a compatibility issue between source and target fields, but without further details (msg definitions etc), we can't tell you exactly what's wrong ...
    What's the ABAP type of ZCOM_COMPDHDR field in your RFC function module ?
    Rgds
    Chris
    PS : also check the msg content to make sure generated field is compatible with the expected type (manual test was successful because you set it to the suitable value, whereas in "real" situation there is discrepancy)
    Edited by: Christophe PFERTZEL on Apr 28, 2008 1:22 PM

  • PO System error - Vendor's address not maintanence !

    Dear friends,
    Our user created a PO , system reproted "vendor's address not maintanence", We checked Vendor's information, not error on that Vendor No.
    Brgds
    WangYong

    If he is, ONE-TIME Vendor..
    You have to enter address, manually in Purchase Order.
    Even if you maintain it in Vendor Master Data.

Maybe you are looking for

  • How to get the path of my java dir in java?

    Hi, I want to get dir path in java. I want to know from where I'm runing in the computer somthing like this? String osUserName = System.getenv("????????"); Thanks and have a good day!

  • Problem in drilling out to relational from OLAP worksheet

    Hi, I am using level based hierarchy for my dimensions and trying drill out to relation worksheet from OLAP worksheet. The problem I am facing is that the way OLAP stores data is always sufixed with the "_LEVELNAME". Now when passing parameters from

  • Ping.vi

    When I use the Ping.vi I get : Error 7 occurred at Open File+.vipen File Possible reason(s): LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, u

  • My BlackBerry Messenger is very very slow. I am not rece...

    My BlackBerry Messenger is very very slow. I am not receiving the messages in a timely fashion.

  • How can I to number the book with CS5? . Has anyone the same difficulty?

    Hi friends, Could you help me?. I need to number a book with Indesing CS5. I mean, I have differents documents und I want to mix in a book. With the previus I can number all the book and that's ok,  but with the new version CS5 I can't. I 've been fo