ABAP proxy scenario file - PI7.1- ECC  NO_MAPPINGPROGRAM_FOUND

Hello Experts,
I have ABAP proxy scenario file -> PI7.1->ECC . I am getting an error for communication between PI and ECC system. the error is NO_MAPPINGPROGRAM_FOUND and pointing to operation mapping in the  software component.
What i found  in TCODE SXMB_MONI is  2 adaptor call  one from one below the other out of which one is in error.
Also when a file is passed from the file server to the SAP PI  I see 2 entries in SXMB_MONI for the same Payload one from source system to target system and one from target system to source system ( ie. from business component as sender and ECC as receiver system and one entry for ECC system as receiver and business system for file as receiver ) is this how it should be
one more thing i would like to specify is that my service interface is Point to point enabled . Is it happening because of that
Request you help on urgent basics
BR Heth

Hi,
1. in PI, by hazard, your Service Interface (SI) does not the mode "synchronous"?
2. or does this SI was declared firstly with "synchronous" mode and the proxy generated with this mode, and then you decided to put "Asynchronous"... without to regenerate the proxy in ECC?
If it's the case, in ECC, select your SI, do a right-click and regenarete the proxy.
3. for the 2nd message (returned by ECC to PI), have you seen the Payload content and SOAP Header?
Could you please also check the Pipeline (e.g CENTRAL, CENTRAL_BACK) ?
4. In SXMB_MONI of ECC, how many messages have you: one ? or two ?
Regards
Mickael

Similar Messages

  • Configure ABAP Proxy scenario in PI7.3

    Hello Experts,
    Can someone please let me know if we have somewhere step by step procedure to configure an ABAP Proxy scenario in PI7.3, I couldn't find How-to guide related to this on SDN.
    Thanks a lot.
    Best Regards,
    Shweta

    I dont know abt your installation whether you have java stack alone or both java stack and abap stack.
    AAE or local processing:
    You can do using soap adapter as transport protocol and message protocol as XI for proxy. This way you can use local processing using AAE.  I dont see documents in SDN as of now. But it is pretty simple. Just follow the steps what I mentioned.
    Classical processing or abap engine:
    Still the same as previous versions.

  • File to ABAP Proxy Scenario

    Hi All,
    I am  doing File-to-ABAP Proxy Scenario, in the sender side side it is picking the file, but in sxmb_moni it is giving the error:
      *<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
    *- <!--  Call Adapter*
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIProtocol</SAP:Category>
      <SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
      <SAP:P1>4CFF4691EEE211DC85E30019D1522982</SAP:P1>
      <SAP:P2>CENTRAL</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Message ID 4CFF4691EEE211DC85E30019D1522982 already exists in called system (pipeline CENTRAL)</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Can u plz tell me why this error is occurring and how we can resolve this error.
    Thanks & Regards,
    Vikas

    Hi Vikas
    make a dummy change and activate your object then make a full refresh
    you can make it through in 3 ways
    1) tcode SXI_CACHE
    2) go to ID -> environment and make a full cache refresh
    3) http://<host>:5<sys#>00/CPACache/refresh?mode=full     Full CPA cache refresh
    when you do the developement then these are stored in ABAP data dictionary table which can be refreshed by delta cache
    while full cache will delete this temporary object and make this cahe into runtime
    hope this will help you
    thanks
    sandeep
    if helpful reward points

  • Performance problem in File to ABAP Proxy scenario

    Hi gurus,
        I have a scenario where the sender is sending a file and the receiver is ABAP Proxy.The file is a simple DAT file containing banking data.The file sample is as belo
    00000MM21901 PYM0901021531     
    704401020100005510000040000D0002
    704401020127147391000033500D0003
    704401020127147391000045000D0004
    704401020109341157000038800D0005
    70420!!!!10200000182174D
    704401021100006040000015158D0001
    704401021100006040000005034D0002
    7042010210000020192D
    The above file need to be split and mapped to the fields of the ABAP Proxy after doing some validations.
    Is Receiver Determination using mapping required? What is the most efficient way of splitting the file?
    Please give your replies keeping better performance of the interface in mind.What is the best way of doing the validations?
    regards
    Debansu

    Hi Satish,
        As you can see in my question above,the sender side contains a flat file(the file format is given in the question),I need to split the file into strings which can then be mapped to specific fields of the ABAP Proxy.A sample output of the xml file that is passed on to the ABAP proxy after mapping transformations is given below:
    <BATCH_TOTAL_RECORD_420>
      <BATCH_REPORT_DISTRICT>70</BATCH_REPORT_DISTRICT>
      <KEY_VALUE>420</KEY_VALUE>
      <BATCH_NUMBER>1021</BATCH_NUMBER>
      <BATCH_TOTAL>0000020192</BATCH_TOTAL>
      <FILLER_BATCH_TOTAL_SIGN>D</FILLER_BATCH_TOTAL_SIGN>
      <FILLER />
      </BATCH_TOTAL_RECORD_420>
    - <BATCH_TOTAL_RECORD_420>
      <BATCH_REPORT_DISTRICT>70</BATCH_REPORT_DISTRICT>
      <KEY_VALUE>420</KEY_VALUE>
      <BATCH_NUMBER>9999</BATCH_NUMBER>
      <BATCH_TOTAL>0000202366</BATCH_TOTAL>
      <FILLER_BATCH_TOTAL_SIGN>D</FILLER_BATCH_TOTAL_SIGN>
      <FILLER />
      </BATCH_TOTAL_RECORD_420>
    I hope now you can provide me some answers.
    Regards
    Debansu

  • Problem with Configuration in Production ( ABAP Proxy - XI - FILE)

    Hi All,
    I have a ABAP Proxy -> XI -> FILE scenario wich is working perfectly in DEV and QAS environment.
    When the person responsible for transporting tried to transport the objects in QAS to PRD, the following error happened:
    Direction of communication channel |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA is incorrect.
    Correct the direction or choose another communication channel
    BS_MA_FileServer_PRD - Business System (FILE)
    CC_File_PedidosServ_MA_FileServer_IA  - My FILE Communication Channel
    This was what the Basis person sent to me. I don't have access to know exactly what happened. And I really don't know what could be wrong or if maybe a component was created wrongly in Production.
    Hope you can help.
    Points will be given.
    tks.. Daniela

    You have mentioned FILE is on the receiving side and ABAP proxy is on sender side.
    But the error pasted by you clearly shows syntax of a Sender Agreement .
    For receiver agreement it should be |<Sender Service>| |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA
    Bipin

  • FTP to ABAP Proxy Scenario - getting error CO_TXT_CHANNEL_PASSWORD_ERROR

    We have transported PI and EP data from development server to respective production, every thing is running fine except the abap proxy scenarios i.e. PI reads file from ftp location and calls the abap proxy but we are getting following errors:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    <!--  Call Adapter
      -->
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = FD768D4A8772DB50E1000000AC10041E) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Any solution?
    Please note that I have searched and applied solutions given on SDN forums but didn't get any success. So I am looking for new suggestions.
    Regards,
    Jawed Ali

    Jawed ,
    Please test the HTTP destination of your receiver comm channel.
    Which is the RFC connection to your R3 system.
    Transaction SM59 and check the logon parameter for the connection you are using.
    Regards,

  • INTERNAL - AMF_ERROR in XML -- ABAP proxy scenario

    Hi Experts,
    Can any one help me to solve this following issue please, it is happening while I am executing the scenario between XML File to ABAP Proxy scenario.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AMF_ERROR</SAP:Code>
      <SAP:P1>1</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>Error when processing message number 1 in package No object type found for the message. Check that the corresponding process is activated An exception has occurred.</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>.
    This XML message has got 5 Lines Header and more than 100 Lin Items, this kind of Header and Lin item message 3 to 4 in one XML, I am using multi mapping. Message mapping shows working fine, OM also shows working fine. BPM is splitting messages to send messages to ABAP Proxy on SNC 7.0. After I have done all with SDN experts support, still I am having the above issue. can any one experties might help to resolve this?
    I will appreciate your support.
    Thanks & Regards
    San

    Can you please explain the solution.
    Regards,
    Rashi

  • ABAP proxy to file-Create package in SPROXY

    hey guys
    i m doin ABAP proxy to file scenario,and when i try to create a ABAP proxy its asking for the package and prefix,do any of u know how to create a package ?
    also if there are any inbuilt packages that i can use
    thanx
    ahmad

    Ahamd,
    use custom packages and you can give prefix start with zxx_
    thanks
    Prasad

  • Issue in Iodc- abap proxy scenario

    Hi all
    I have a idoc to abap proxy scenario. The issue is ,
    when we send the idoc to client A of target system, it works ifne.
    But when we send the saem mesage to Client B, we find a error message in sxmb_moni of Target system. the mesage is Application_fault.
    Is it because of any error in XI configuration or somethin else.

    hi all
    thanks for all your responses.
    I forgot to mention that based on a particualr field value in the idoc , it will be routed to eihter Client 100 or 200 .
    I gave the conditions in Receiver Determination.
    Same Server Proxy  is used in both the target business sytems.
    I have done all the Configuration Steps ,( Created two separate business systems also )
    Also I have checked wiht all the system settings to be made in the target system B.
    When i trigger the idoc to Client 100, it goes to XI and then reaches  Client 100 of System B
    without any problem. I get the desired result from proxy code.
    When i send the saem idoc to Client 200, it reaches the target system and routed to client 200. But getting this error message in
    the Call Inbound PRoxy step. (from sxmb_moni)
    <SAP:Category>Application</SAP:Category>
      <SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
    Since it reaches the target system correctly, i guess there is nothing wrong in the XI configuration side.
    But if its Application fault, how come the same data is processed successfully in one client whereas it thorws error in another.

  • HTMLError in sxmb_moni, Idoc to ABAP Proxy Scenario

    Hi Friends
    I am trying to send data from R3 to SCMTM system(SAP System), via Idoc to ABAP Proxy Scenario ,I am getting the following under HTMLError in sxmb_moni
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>400</SAP:P1>
      <SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
      <SAP:P3>(See attachment HTMLError for details)</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED) (See attachment HTMLError for details)</SAP:Stack>
      <SAP:Retry>A</SAP:Retry>
      </SAP:Error>
    Any ideas will be helpful.

    Hi,
         I faced similar problem. it was due to configuration problem in SXMB_ADM. corss check  specific server confiration in SXMB_ADM.
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    Regards,
    Reyaz

  • Creation of package structure for ABAP proxy scenario

    Hi All,
    I have a doubt on package structure used for ABAP proxy scenario. What is the specific reason to create a four level package structure? Can some one please explain? Thanks in advance.
    Regards,
    Sudheer.

    Hi Sudheer,
    Can you pls clarify what do you mean by 'four level package structure' ?
    Are you referring to the ABAP structures that get created during creating the proxy by SPROXY transaction ? These structures get automatically created. We simply have to write the code using these structures.
    Or do you mean the 'package' which is mandatory to create a transportable ABAP object ? i.e. transport from Development to Staging and then Production.
    Regards,

  • PCK XI adapter - ABAP Proxy  to File Scenario How to?

    Hi there,
    We want to implement the following sceanrio; SAP ABAP outbound proxy to Flat-File scenario. A (sender) SAP system will trigger an outbound proxy which will send outbound data to a (receiver)file system via the PCK and Central Integration Server.
    SAP (ABAP proxy) -> PCK-> XI -> File System
    My question is; The PCK documentation suggests that the XI adapter included in the PCK can only be used to send/forward messages to the central integration server.
    Does that means that one cannot use the same XI adapter on the PCK to redirect ABAP proxy messages to the Integration server?
    Thanks,
    Roberto

    The PCK cannot be used as a replacement for XI Integration server. PCK is only a type of adapter engine that can run independantly. It is intended for partners who cannot use XI server. So PCK can not in itself execute interfaces. It can just forward all the messages received to the XI Integration server. PCK can only run your sender or receiver adapter all the mappings can only be executed on the integration server. So PCK just converts from the native format to XI format and forwards to the Integration Server.
    Hope that carifies your question .
    Thanks,
    Kalyan Musunuri

  • File to Abap Proxy Scenario : No message log in SXMB_MONI

    I have a PI Scenario in which a FTP server is polled every 5 minutes, and when it receives any file,  file is archieved and abap proxy is called. Few days back it was running perfectly fine. But For last couple of days I am facing strange error.
    My File is archived but abap proxy isnot called, neither I get any message in SXMB_MONI.
    any guesses what should I do?
    Jawed Ali

    Hi Jawed,
    HOLD means you have given QoS as EOIO in sender channel and the first message got failed and hence all messages are waiting..
    Check this thread
    Re: PI 7.1 Messages stuck into the Queue of the Adapter Engine
    Try resending the messages through runtime workbench->message monitoring->adapter engine
    Regards
    Suraj

  • File to Proxy scenario message failed in ECC with staus SYSFAIL

    Hi All,
    We are working on File to proxy scenario,  PI  able to send message successfully to ECC, but  In ECC , message got  stuck in queues with the status 'SYSFAIL',
    when I read the error message it is showing Address Invalid.
    when I run the LUW, it is giving 'Function module does not exist or EXCEPTION 'raised message.
    I'm using PI 7.1 EHP1 , ECC 6.0, can anyone suggest the trouble shooting guidelines for this issue?
    Thanks,
    Venu.

    when I run the LUW, it is giving 'Function module does not exist or EXCEPTION 'raised message.
    in your code, there seems to be an invalid statement.
    check the proxy code.

  • SAP XI- File to ABAP Proxy scenario

    Hi SDN,
    I have a FILE to ABAP proxy scenarioin SAP+XI can you guide me how to procede in that, what should be my ESR and ID objects and how to use the sproxy transaction.
    Regards,
    Aniruddha Bhattacharya

    Hi,
    please check out the search option on SDN forum first - there are tons of blogs with step by step on the same
    come back with more detailed questions ok ?
    thank you,
    Regards,
    Michal Krawczyk

Maybe you are looking for