ABAP query using logical database KDF is not populating custom fields

Hi Experts ,
I created two following queries
1.       VENDORCATKDF – uses KDF logical database
2.       VENDORCATLFA1 – uses table = LFA1
I’m pulling the same information in both queries:
·         Vendor Number
·         Country
·         Vendor Name
·         Vendor Category  (custom fields added to LFA1)
The results for the query that uses the logical database KDF is incorrect.  It doesn’t pull in the flag on the custom field LFA1-ZMRO.   Even though the logical database KDF is made up of the table LFA1 and has these fields. 
Is there something that can be done – so that all of these “custom” category fields under LFA1 (such as LFA1-ZZMRO) – get pulled into queries – when we use the logical database KDF ?

Hi,
I have got the error removed by ensuring that fields from one table are a part of one line ( taking help of ruler) only. But the underlying problem remains, the output is not ALV but List output.
I do not think having additional fields in the query is reason for this.
Is it bcoz iI am adjusting the output length of columns to ensure no hierarchical error ?
Can we not have a query using LDB which is shown as SAP List?
Regards,
Garima.

Similar Messages

  • SAP / ABAP Query - using logical database

    Hi ,
    We have a mandate to implement SAP Query using only Logical Databases (LDB ) .
    We understand that there are several issues using this approach .
    1 ) Paralled tables in MM need to be displayed on separate lines .
    2 ) Statistics based on fields from 2 different tables cannot be produced eg: EKPO ( PO Number )  and EKKN . (Cost Center )
    Please share your experiences .
    Thank you in advance .
    Kishore
    Kishore

    Adeel,
    I do appreciate your experience and respect you for knowledge on SAP Query. 
    Joining tables seem simple to IT experts but not so for end users.  SAP Query is an end-user tool and users seem to need a simple user-friend, drag-and-drop solution to extract information using SAP Query based on a pre-defined infoset.  Various SAP conferences have been advocating the use of SAP delivered Logical Databses to create infosets in order to harness the various advantages of LDBs. 
    In MM there are several LDBs (e.g. ELM, EBM etc) to create queries on EKPO and EKKN.  The problem arises when you use the same LDB to extract information from more than the above two tables e.g. EKPO, EKET, EKKN and EKBE.  SAP expects you to display fields on multiple lines and also does not allow producing statistics based on fields from two parallel tables say EKKN and EKBE.  Moreover, multi-line reports cannot be produced in the ALV/SLV format.  
    We are also looking for best practise solutions in providing SAP Query to MM or FI users based on SAP delivered Logical Databases.  
    Pascal

  • Duplicated entries in BSIK using Logical Database KDF

    Hello everyone,
    I'm using Logical Database KDF to retrieve some data, but i'm getting duplicated entries when getting to BSIK. Can anyone point out in my program what could i be doing wrong?
    If i put a breakpoint in the line immediatly below GET bsik, i can watch several entries being duplicated.
                                         Thanks in advance to everyone,
                                                       Nuno
    START-OF-SELECTION.
    GET lfa1.
      MOVE-CORRESPONDING lfa1 TO t_alv.
    GET lfb1.
    GET bsik.
      MOVE-CORRESPONDING bsik TO t_alv.
      CLEAR bkpf.
      SELECT SINGLE * FROM  bkpf CLIENT SPECIFIED
             WHERE  mandt  = syst-mandt
             AND    bukrs  =  bsik-bukrs
             AND    belnr  = bsik-belnr
             AND    gjahr  = bsik-gjahr.
      t_alv-xblnr = bkpf-xblnr.
      SELECT        * FROM  bset CLIENT SPECIFIED
             WHERE  mandt  = syst-mandt
             AND    bukrs  = bsik-bukrs
             AND    belnr  = bsik-belnr
             AND    gjahr  = bsik-gjahr.
         t_alv-mwskz = bset-mwskz.
          t_alv-hwbas = bset-hwbas.
          t_alv-hwste = bset-hwste.
          t_alv-dmbtr = bset-hwbas + bset-hwste.
          t_alv-stceg = lfa1-stceg.
        APPEND t_alv.
      ENDSELECT.

    Hello Nuno Centeio ,
                                      According to the table definition there can be more than one entries for a vendor based on the table key definition.
    Thanks,
    Greetson

  • Query using logical database

    Hi,
    There is one query which is using logical database PNM. I have got one requirement to add one field in selection screen to filter the output. The field which is required to be displayed in selection screen to filter the data is from table mkal which is not present in logical database. Hence my question is, is it possible to add field from table which is not present in logical database? IF yes, please specify the procedure.

    Hi Jogeswara,
    Thanks for your inputs.
    But my question is, how can I filter the data which is being fetched by standard logical database. I cannot go inside the std. LDB and change internal tables of it. I tried coding in extras, but I think it works only if we want to add additional fields in output.
    At present, we are considering the option of creating a z LDB where we copy. std. LDB and also add the reqd. table which is not present in LDB.
    Is there any other option?
    Please provide your valuable inputs.
    Regards,
    Imran Kundan.

  • BADI  ME_GUI_PO_CUST not populating custom fields

    Hi!
        I've created my custom fields in the Line item level for ME21n transaction. The custom fields are in the include structure CL_EKPODB for EKPO. I'm unable to populate my custom fields. Help needed.
        My screen fields are named EKPO-ZZSTREET ,EKPO-ZZCITY etc.  
    Thanks
    Shubha!

    Hi Shubha
          You have to set the mode ( editable / display only etc ) in method FIELDSELECTION_ITEM of BADI ME_PROCESS_PO_CUST to populate custom fields in  ME_GUI_PO_CUST.
    By default system will take display mode. So u can your customer field in Me23n.
    Regards
    Jeevi

  • Call Logical database KDF

    Hi expert.
    now that, I'm using Logical database KDF for report module AP, but i meet issue following.
    first way i used SE38 and choose radio Attribute and Input LDB is KDF.
      In program I get only NODE BSIK but structure BSEGA Not is initial( I don't get BSEG anywhere)
    second way. I used FM LDB_PROCESS to call LDB KDF.
    I also get NODE BSIK then BSEGA Is initial.
    Please anybody to me first way structure BSEGA have data, second way it haven't data.
    Thank & best regards,
    Dungnv

    don't use fm but include KDF as in standard report RFKOPO00
    hope that helps
    Andreas

  • Can I use logical databases in a WebDynpro ABAP program?

    can I use logical databases in a WebDynpro ABAP program?
    I need to build a WDA screen that is similar to the SAPDBPNP selection screen (user can find the personnel number based on several criteria, such as last_name/first_name of the employee).  So it seems that the existing logical databases have already many nice features already built (like the selection screens, the logic behind the screens etc). So I was wondering if/how I can use them in my WDA application.

    Hello, Tiberiu.
    You cannot use LDB directly within your WDA programa. BUT, you can fetch results from this LDB by using FM LDB_PROCESS. This function module can be called anytime from any kind of ABAP program. But you will still have to create the screen, as it only processes data, not screens.
    Regards,
    Andre
    PS: Pls reward points if it helps.

  • Can I use logical databases in a WebDynpro for ABAP program?

    can I use logical databases in a WebDynpro ABAP program?
    I need to build a WDA screen that is similar to the SAPDBPNP selection screen (user can find the personnel number based on several criteria, such as last_name/first_name of the employee).  So it seems that the exisinting logical databases have already many nice features already built (like the selection screens, the logic behind the screens etc). So I was wondering if/how I can use them in my WDA application.

    Hi
    Please let me also know the solution to this. I am a beginner to WebDynpro  and want to know if I can make use of LDB's as we do in our normal HR programming do develop a WDA in HR.
    Thanks and regards,
    Uma.

  • PNPCE in ABAP Query !!! Slection is not working completely

    Hi
      I have developed an ABAP query using LDB PNPCE. I am reading data from IT000,IT0001 etc . I test the query in QA and I noticed that the PNCPCE screen doesn’t care about the selection in query. Like I have given the date range in PNCPE default screen. But it’s not filtering that data at all. It pulling up the employee’s regardless of date, it behaves the same for field action type (P0000-MASSn). The surprising thing is that for company code its working fine. My question is that Why PNPCE standard screen-selection not filtering data in ABAP query.
    Did any one of you also experience that?
    <u>
    <b>FYI</b></u>
    I also find an OSS note # 730005 but we are already on 52 Patch !!
    OSS note :PNPCE: Incorrect data of infotype 0000 and 0001
    Symptom
    When you carry out a reprot which is based on logical database PNPCE, errors occur during the processing of infotypes 0000 and 0001.
    Other terms
    PNPCE, AS PERSON, P0000, P0001, data selection period, person selection period, CHECK_IT_0000_DATA_RESTRICTED, CHECK_IT_0001_DATA_RESTRICTED
    Reason and Prerequisites
    You start a report which is based on logical database PNPCE. In the report, infotype 0000 or 0001 is processed (that is, it was declared via the INFOTYPES statement). At event 'GET GROUP' or 'GET PERAS', the system either returns too few data records in the infotype tables or it returns data records twice.
    The error (missing data records) has only occured since the implementation of Note 687004 or the import of Support Package SAPKE47028.
    Solution
    Implement the attached corrections. or import the corresponding Support Package.
    Thanks
    Saquib Khan

    Hi Saquib,
       Recently i am facing the same issue can u pls do reply how you have overcome this issue..The data is not getting picked up at the right time it is lately picked up by the program . Earlier it was PNP and it has been changed to PNPCE also we had implemented OSS Note 687004 and the later's Notes  were also implemented but still now we are unable to track down why there is delay in picking up the records this has been happening for the past 8-10 Months(i m not sure far more before). I am finding 2 main issues,
    1. we are using GET peras in PNPCE and no other event after that may be this is not fetching all the data because my selection screen does contain PERSONID where i suppose there should be GET PERSON event to define it
    2. RP_READ_INFOTYPE macro while using for P0000 ,, the code in the macro is such that it fetches using P0001 also ...I suppose if there are any inconsistency between IT0 and IT1 then this might one to take care ...
    kindly let me know how you have approached to resolve this issue.

  • How to use Logical database in function module?

    I will create a function module in HR.
    but how to use Logical database  in function module ?  Logical database PNP always show screen.in function (RFC) code , it is a matter.

    You cannot attach the LDB to the main program of the function group.
    - So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
    - Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
    - Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
    Regards

  • How to retrieve data using logical database and custom select options

    Hi all,
    I have a selection screen which is displayed by logical database PSJ and I have two select options of my own. I need to retrieve data based on both selection screen of logical database and my own select options. How can I do it?
    Thanks in advance.

    Hai Gupta
    Check the following Document & Links
    1. A logical database is in fact
    a program only.
    2. This LDB provides two main things :
    a) a pre-defined selection screen
    which handles all user inputs and validations
    b) pre defined set of data
    based upon the user selection.
    3. So we dont have to worry about from
    which tables to fetch data.
    4. Moreover, this LDB Program,
    handles all user-authorisations
    and is efficient in all respects.
    5. tcode is SLDB
    good info about Logical Database. you can check the link.
    http://www.geekinterview.com/question_details/1506
    http://help.sap.com/saphelp_46c/helpdata/EN/35/2cd77bd7705394e10000009b387c12/frameset.htm
    Re: How to Create and Use ldb in reports?
    Re: Logical databases
    http://help.sap.com/saphelp_46c/helpdata/en/9f/db9bed35c111d1829f0000e829fbfe/frameset.htm
    Functions for displaying and changing logical databases:
    Call Transaction SE36 or
    Choose ABAP Workbench -> Development -> Programming environ. -> Logical databases
    Interaction between database program and report:
    During program processing, subroutines are performed in the database program and events are executed in the report.
    To read data from a database tables we use logical database.
    A logical database provides read-only access to a group of related tables to an ABAP/4 program.
    advantages:-
    The programmer need not worry about the primary key for each table.Because Logical database knows how the different tables relate to each other,and can issue the SELECT command with proper where clause to retrieve the data.
    i)An easy-to-use standard user interface.
    ii)check functions which check that user input is complete,correct,and plausible.
    iii)meaningful data selection.
    iv)central authorization checks for database accesses.
    v)good read access performance while retaining the hierarchical data view determined by the application logic.
    disadvantages:-
    i)If you donot specify a logical database in the program attributes,the GET events never occur.
    ii)There is no ENDGET command,so the code block associated with an event ends with the next event
    statement (such as another GET or an END-OF-SELECTION).
    1. transaction code SLDB.
    2.enter name z<ldb-name>
    3.create
    4.short text
    5.create
    6. name of root node (here Ekko)
    7. enter short text (f6)
    8.node type -> data base table.
    9.create
    10 change logical DB
    riht click on ekko and insert node
    here node name ekpo
    11.create
    12. click on selections
    13. press no Should the changed structure of Z<ldb name> be saved first.
    14.select tables which you want to join.
    15.transfer
    16 now you have to o to coding part.
    17. save
    activate.
    19.click to src code
    double click on first include and activate
    Regards
    Sreeni

  • How to inactivate the 'Complex Search' button when using Logical Database

    Hy experts
    I m using Logical Database for a select and you know that for an GET event by default in selection screen it appears some selection fields for every GET event..I manage to hide the ones that don't interest me but I have a little problem: I have a button that's called 'Complex Search' and I don't know how to get rid of this button..
    Here is some code:
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
    IF screen-name CP '%BT02010_BLOCK_1000'.
          screen-input = '0'.
          screen-active = 0.
          screen-invisible = 1.
          MODIFY SCREEN.
        ENDIF.
        IF screen-name CP 'QL_REFIL'.
          screen-input = '0'.
          screen-active = 0.
          screen-invisible = 1.
          MODIFY SCREEN.
        ENDIF.
    I do this for every screen-name in the program that doesn t interes me..but it seams that even if I comment all the button with 'Complex Search' remains..I mention that is a disperate solution to inactivate every screen element but I could not do other way..My bigest pb is the 'Complex Seach' button..can anyone help me?? pls.. <REMOVED BY MODERATOR> ..thx..
    Edited by: Alvaro Tejada Galindo on Feb 12, 2008 12:45 PM

    Thank you Thomas,
    I need some more from you...
    If I have 8 tables for 8 columns, then how do i proceed?
    Also could u tell me some query optimization techniques while working with intermedia text.
    Thanks you once again,
    waiting...
    Khaleel Hi Khaleel,
    I think this depends on your data model (relationship between the tables) and how you like to search later.
    The optimization begins also with the create index statement (memory clause and storage clause).
    If you like me to help I need more information about your hardware, os, datamodel and what kind of searches you will have later.
    Cheers,
    Thomas

  • Logical Database KDF ( FBL1N )

    Hi SPecialist
    I am trying to add a new field in the logical database KDF. I have several tables here and I would like to add the field USERNAME from BKPF
    I suppose that it is possible because I can see the following tables
    LFA1           Vendor Master (General Sectio
    ADDR1_VAL      Address Data
    LFAS           Vendor Master (General Part E
    LFBK           Vendor Master (Bank Details)
    LFB1           Vendor Master (Company Code)
    LFB5           Vendor Master (Dunning Data)
    LFC1           Vendor Master (Transaction Fig
    LFC3           Vendor Master (Transaction Fig
    BSIK           Accounting: Secondary Index fo
    ADMI_FILES     Archive Files
    BSIKEXT        Secondary Index & Additions Se
    BKPF           Accounting Document Header
    But when I try to add the field in the functional groups It doesnt appear in the transaction FBL1N.
    Any idea??
    Thanks

    Hi:
          Have you tries adding this USERNAME field to FBL1N report using menu...settings...special fields..I think this can be done via special fields addition...Please note that in special fields , fields from BKPF and BSEG can be added. For adding other fields like Vendor name e.t.c you will have to make use of BTE 1650 in FIBF...Please take help for ABABPER. Hope it helps.
    Regards

  • Why and how we use Logical Database?

    Can anybody explain with example why and how we use logical database?
    Regards,
    Rajan

    Hello,
    SAP comes loaded with all the extras. Among the extras that are most helpful to IT managers are all the access routines needed to pull any business object that managers can think of out of SAP databases. However, SAP has not thought of everything where your particular applications are concerned. SAP organizes its standard database tables to service business units based on conventional business applications. Itu2019s likely your business requires something new, perhaps even something exotic. In that case, you will need to create a new database, using information from different places. Basically, you need a logical database. You need to create a virtual business data object repository consisting of a new kind of record or table that suits your purposes. In addition, the repository should be composed of information that is actually stored in a number of different locations, none of them necessarily logically associated with one another. Letu2019s take a closer look at creating logical databases.
    A case for a logical database
    Suppose my company manufactures widgets of the most obscure variety, and they are components of other widgets. I sell my widgets as raw material for the more sophisticated widgets built by others, but in some cases I actually partner with other manufacturers in creating yet another class of widget. Now, in my world, I consequently have customers who are also partners. I sell to them and I partner with them in manufacturing and distribution. Also, I need an application that uses both of these dual-use relationships.
    Essentially, I have a customer database and a partner database. Neither contains records that are structured to contain the identifying particulars of the other. Thus, I need a hybrid database that gives me tables detailing these hybrid relationships. What can I do? I can go the long way around and write a new database, pulling information from both and creating new objects with a customized program that I write by hand. However, this process is cumbersome and contains maintenance issues. On the other hand, I can use SAPu2019s logical database facility, create my logical database in a couple of minutes, and have no maintenance issues at all.
    Logical database structures
    There are three defining entities in an SAP logical database. You must be clear on all three in order to create and use one.
    u2022     Table structure: Your logical database includes data from specified tables in SAP. There is a hierarchy among these tables defined by their foreign keys (all known to SAP), and you are going to define a customized relationship between select tables. This structure is unique and must be defined and saved.
    u2022     Data selection: You may not want or need every item in the referenced tables that contributes to your customized database. There is a selection screen that permits you to pick and choose.
    u2022     Database access programming: Once youu2019ve defined your logical database, SAP will generate the access subroutines needed to pull the data in the way you want it pulled.
    Creating your own logical database
    ABAP/4 (Advanced Business Application Programming language, version 4) is the language created by SAP for implementation and customization of its R/3 system. ABAP/4 comes loaded with many predefined logical databases that can construct and table just about any conventional business objects you might need in any canned SAP application. However, you can also create your own logical databases to construct any custom objects you care to define, as your application requires in ABAP/4. Hereu2019s a step-by-step guide:
    1.     Call up transaction SLDB (or transaction SE36). The path you want is Tools | ABAP Workbench | Development | Programming Environment | Logical Databases. This screen is called Logical Database Builder.
    2.     Enter an appropriate name in the logical database name field. You have three options on this screen: Create, Display, and Change. Choose Create.
    3.     Youu2019ll be prompted for a short text description of your new logical database. Enter one. Youu2019ll then be prompted to specify a development class.
    4.     Now comes the fun part! You must specify a root node, or a parent table, as the basis of your logical database structure. You can now place subsequent tables under the root table as needed to assemble the data object you want. You can access this tree from this point forward, to add additional tables, by selecting that root node and following the path Edit | Node | Create. Once youu2019ve saved the structure you define in this step, the system will generate the programming necessary to access your logical database. The best part is you donu2019t have to write a single line of code.
    Regards
    Arindam

  • HR Reporing Payroll using Logical Database PNPCE

    Hi ALL
    Can any body explain me how can we do HR Payroll reporing using logical database PNPCE.
    In the program attibutes as mentioned we need to scee 900 for payroll reporting, but when I use PNPCE I cant see that screen in the Dropdown.
    can any body help me with this.
    regards
    AJ

    check this program..
    REPORT    ZHR_PAYROLL_EX1
               MESSAGE-ID ZZ
               LINE-SIZE 132
               LINE-COUNT 64(2)
               NO STANDARD PAGE HEADING .
                  T A B L E S                                            *
    TABLES    : PA0001 ,        "Infotype 0001
                 PCL1,           "HR Cluster 1
                 PCL2,           "HR Cluster 2
                 T549A,          "Payroll Accounting Areas
                 T549Q.          "Payroll Periods
                  I N C L U D E S                                        *
    *--Standard Include for US Payroll
    INCLUDE RPC2RUU0.            "Cluster RD data definition
    INCLUDE RPC2CD00.            "Cluster CD Data-Definition
    INCLUDE RPC2CA00.            "Cluster CA Data-Definition
    INCLUDE RPC2RX00.            "Cluster RF data definition internat. part
    INCLUDE RPPPXD00.            "Data definition buffer PCL1/PCL2
    INCLUDE RPPPXD10.            "Common part buffer PCL1/PCL2
    INCLUDE RPPPXM00.            "Buffer handling routine
                    INTERNAL TABLES
    *Internal Table to Hold data from PA0001
    DATA : BEGIN OF I_0001 OCCURS 0,
              PERNR LIKE PA0001-PERNR,  "Personnel Number
            END OF I_0001.
    *Internal Table to Hold data from PA0001
    DATA : BEGIN OF I_FINAL OCCURS 0,
              PERNR LIKE PA0001-PERNR, "Personnel Number
              GAMNT LIKE PC207-BETRG,  "Gross Amount
              NTAMT LIKE PC207-BETRG,  "Net Amount
              PAYDT LIKE PC261-PAYDT,  "Pay Date
              RUNDT LIKE PC261-RUNDT,  "Run Date
              VORNA LIKE PA0002-VORNA,  "First Name
              NACHN LIKE PA0002-NACHN,  "Last Name
            END OF I_FINAL.
    *Internal Table to Hold data from PA0002
    DATA : BEGIN OF I_0002 OCCURS 0,
              PERNR LIKE PA0002-PERNR,  "Personnel Number
              VORNA LIKE PA0002-VORNA,  "First Name
              NACHN LIKE PA0002-NACHN,  "Last Name
            END OF I_0002.
    Control record type
    TYPES     : BEGIN OF T_T569V,
                   ABKRS    LIKE T569V-ABKRS, "Personnel Area
                   PABRJ    LIKE T569V-PABRJ, "Accounting year
                   PABRP    LIKE T569V-PABRP, "Accounting period
                   STATE    LIKE T569V-STATE, "Status of Control Record
                   ADRUN    LIKE T569V-ADRUN, "HR: Special payroll run
                 END   OF T_T569V.
                      STRUCTURES
    DATA : WA_T569V TYPE T_T569V.    " Work area for t569v
                     DATA
    DATA : V_PABRJ  LIKE T569V-PABRJ,  "Accounting year
            V_PABRP  LIKE T569V-PABRP,  "Accounting period
            V_BEGDA  LIKE SY-DATUM,     "Begin Date
            V_ENDDA  LIKE SY-DATUM,     "End Date
            V_FPPER(6) TYPE C,          "For Period
            V_SEQNR  LIKE PC261-SEQNR.  "Sequence Number
       SELECTION SCREEN
    Selectio Screen Block for Employee Selection.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    SELECT-OPTIONS : S_PERNR FOR PA0001-PERNR, "Pernr
                      S_DATE  FOR SY-DATUM.     "Date
    SELECTION-SCREEN END OF BLOCK B1.
       START-OF-SELECTION
    START-OF-SELECTION.
    *Get Data from pa0001
       PERFORM GET_DATA_FROM_0001.
    *Get Data from pa0001
       PERFORM GET_DATA_FROM_0002.
    *Get CHAD Details
       PERFORM GET_PAYDATA.
       END-OF-SELECTION
    END-OF-SELECTION.
       IF NOT I_FINAL[] IS INITIAL.
    *Print the Final Report.
         PERFORM PRINT_REPORT.
       ENDIF.
                    T O P  O F  P A G E
    TOP-OF-PAGE.
    Display Header
       PERFORM DISPLAY_HEADER.
                    S U B - R O U T I N E S
    *&      Form  get_data_from_0001
          Get Data from 0001
    FORM GET_DATA_FROM_0001.
       SELECT PERNR                     "Personnel Number
              FROM PA0001
              INTO TABLE I_0001
              WHERE PERNR IN S_PERNR AND
                    ENDDA >= S_DATE-LOW AND
                    BEGDA <= S_DATE-HIGH .
       IF SY-SUBRC = 0.
         SORT I_0001 BY PERNR.
       ENDIF.
    ENDFORM.                    " get_data_from_0001
    *&      Form  get_data_from_0002
          Get Data from 0002
    FORM GET_DATA_FROM_0002.
       SELECT PERNR                     "Personnel Number
              VORNA
              NACHN
              FROM PA0002
              INTO TABLE I_0002
              WHERE PERNR IN S_PERNR AND
                    ENDDA >= S_DATE-LOW AND
                    BEGDA <= S_DATE-HIGH .
       IF SY-SUBRC = 0.
         SORT I_0002 BY PERNR.
       ENDIF.
    ENDFORM.                    " get_data_from_0002
    *&      Form  populate_chad_coinage_table
          text
    FORM GET_PAYDATA.
       LOOP AT I_0001.
         READ TABLE I_0002 WITH KEY PERNR = I_0001-PERNR BINARY SEARCH.
         IF SY-SUBRC = 0.
           I_FINAL-VORNA = I_0002-VORNA.
           I_FINAL-NACHN = I_0002-NACHN.
         ENDIF.
    Read Result Directory for Payroll Results for a Employee.
         PERFORM CU_READ_RGDIR.
    Get Sequence Number & Associated Payroll Results.
         PERFORM GET_PAYROLL_RESULTS.
       ENDLOOP.
    ENDFORM.                    " get_paydata
    *&      Form  cu_read_rgdir
          Reag rgdir to get the results with conty grouping 'TD'
    FORM CU_READ_RGDIR.
       DATA : V_MOLGA  LIKE T500L-MOLGA ."Country Grouping
    *Call function module to get Results
       CALL FUNCTION 'CU_READ_RGDIR'
         EXPORTING
           PERSNR          = I_0001-PERNR
         IMPORTING
           MOLGA           = V_MOLGA
         TABLES
           IN_RGDIR        = RGDIR
         EXCEPTIONS
           NO_RECORD_FOUND = 1
           OTHERS          = 2.
       SORT RGDIR BY SEQNR.
    ENDFORM.                    " cu_read_rgdir
    *&      Form  get_payroll_results
          Get Sequence number
    FORM GET_PAYROLL_RESULTS.
       LOOP AT RGDIR WHERE   SRTZA = 'A' AND
                         VOID IS INITIAL AND
                         REVERSAL IS INITIAL AND
                         OUTOFSEQ IS INITIAL AND
                         PAYDT    IN S_DATE.
         V_SEQNR = RGDIR-SEQNR.
    *-- Macro Call for Germany
         RP-INIT-BUFFER.
         RX-KEY-PERNR = I_0001-PERNR.
         RX-KEY-SEQNO = V_SEQNR.
         RP-IMP-C2-RU.
         LOOP AT RT WHERE LGART = '/559'.
           I_FINAL-PERNR = I_0001-PERNR.
           I_FINAL-GAMNT = RT-BETRG.
           I_FINAL-PAYDT = RGDIR-PAYDT.
           I_FINAL-RUNDT = RGDIR-RUNDT.
           APPEND I_FINAL.
           CLEAR  I_FINAL.
         ENDLOOP.
       ENDLOOP.
    ENDFORM.                    "get_payroll_results
    *&      Form  display_header
          Display Header
    FORM DISPLAY_HEADER .
       FORMAT COLOR 1.
       ULINE.
       WRITE:/1 SY-VLINE,
             (15) 'Empl Number',
             SY-VLINE,
             (20) 'First Name',
             SY-VLINE,
             (20) 'Last Name',
             SY-VLINE,
             (15) 'Pay Date',
             SY-VLINE,
             (15) 'Run Date',
             SY-VLINE,
             (25) 'Gross Amount',
             132 SY-VLINE.
       ULINE.
       FORMAT COLOR OFF.
    ENDFORM.                    " display_header
    *&      Form  print_report
          Display Report
    FORM PRINT_REPORT .
       LOOP AT I_FINAL.
         WRITE:/1 SY-VLINE,
               (15) I_FINAL-PERNR,
               SY-VLINE,
               (20) I_FINAL-VORNA,
               SY-VLINE,
               (20) I_FINAL-NACHN,
               SY-VLINE,
               (15) I_FINAL-PAYDT,
               SY-VLINE,
               (15) I_FINAL-RUNDT,
               SY-VLINE,
               (25) I_FINAL-GAMNT,
               132 SY-VLINE.
         ULINE.
       ENDLOOP.
       SKIP 2.
       WRITE:/1 'Period Begin Date:',(25) V_BEGDA.
       WRITE:/1 'Period End   Date:',(25) V_ENDDA.
    ENDFORM.                    " print_report

Maybe you are looking for

  • Black and White... with color.

    Hello, I have a project to do on bullying. I have a clip of a kid walking down a hallway, with brightly colored posters behind him. I want to make the entire shot black and white, but yet still have the posters have color, and continue to have color

  • Quicktime cannot play iPhone 4S movies

    I recorded a couple videos on my new 4S and when I try to copy them to my XP laptop or play them in Quicktime, I get the following error: "Error -2048: Couldn't open the file IMG_0001[1].MOV because it is not a file that Quicktime understands" These

  • Mac update notifaction without updates...

    I just got an update note by my software update option, but there is noting in the list. Is this an apple error?

  • N80 SMS problem/restarting (!?)

    hi. I have a few problems, i don't know if they are linked. I'll start with a background story. I had UltraIMpro, and F-secure anti-virus (both trial versions) on my N80, both had run out of subscriptions. I noticed that my phone had started to resta

  • I would like to import my bookmarks from IE but the 'Import Data from Another Browser' is greyed out and not an available choice.

    By following the directions on Firefox to open up the Library tool - import & backup - The drop down choice to 'Import Data from another Browser' this choice is greyed out and unavailable. I do not know how to proceed in order to import my favorites