ABAP Run time error while doing MIR6

Hi,
We are processing posting parked invoice & system did not displays the document & after then it throws long run time error.
regards,
mahesh

Hi,
Such run time errors occur if you are trying to process huge data or if the system is being accessed by too many users and if there are any foreground jobs run in the sap for huge data. Infact go to /tcode ST22 and check for the detailed error message and try executing the tcode after some time and also check if there are any jobs which have been scheduled in the foreground.
hope this helps
regards,
radhika

Similar Messages

System is giving ABAP run time error while perform LT06 or create TO with r

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
Short dump has not been completely stored. It is too big.
P_MENGA = P_MENGE.
007940 P_UMREZ = 1.
007950 P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

Hi,
Go to Tcode ST22 and mentione the dump code there and check.
Also take help[ of Abapers to fix it.
Thanks
Utsav

ABAP run time error while perform LT06 or create TO with respect to posting

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
>> Short dump has not been completely stored. It is too big.
>       P_MENGA = P_MENGE.
007940       P_UMREZ = 1.
007950       P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

This part is just the place in the program where the error occured, but why the error occured is mentioned earlier in the dump.
Maybe you have a too big number in the field and hence a field overflow, maybe you have a character instead of a number in the field.
Read the dump from the beginning. if you dont know how to read a dump,then try to get help from any local Abaper.

Run time error while doing VL10B transaction for STO

Dear All,
We are facing problem of run time error while creating Delivery (VL10B) for STO .We have two company codes .For one company code its working fine .But we are trying for another company code ,this error coming.error detals
Error in the ABAP Application Program
The current ABAP program "SAPLV05I" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not cau
     in
    procedure "SD_PARTNER_UPDATE" "(FUNCTION)", nor was it propagated by a RAI
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
Kindly suggest as to how to resolve this asap.
regards
umesh

These Kind of Errors Generally Occor for the wrong maitnaince of the partner functions. If you are using any user exits to detremine the partner functions. check the logic in that routine.
Because we do frequently get this error, but only if we hae not maintained as per the rule written in the user exit..
The USer exits for partner Determiantion to check is Function Module EXIT_SAPLV09A_003. THis gets activated, if you have give the source parner function as "X/Y/Z" in your partenr determiantion procedures.

Run time error while doing PGI

hi gurus
while doing PGI i am experiencing run time error.
the ERROR ANALYSIS says that " check doc number 49 in company code 1234 and fiscal year 2007. and correct the number range status if necessary".
i'm confused. please guide how to rectify the problem.
thank you all in advance
regards
madhu

Create new number range in T.Code:FBN1
Go to menu path:
IMG > Materials Management >Inventory Management and Physical Inventory > Number Assignment > Define Number Assignment for Accounting Documents
Click on "Financial Accounting Document Types"
go to Accounting Documents WA, WI, WL and double click on them and change the number range to the new number range created.
Regards
AK

Abap run time error while downloading from spool

Hi,
Please find the error as an attachment when a user is trying to download data from spool.
Please Guide me solution..
Thanks in advance..
Reagrds
Aravind.

Hi Aravind,
It could be due to overflow of your spool count.Try to check it first or if possible delete some old spool requests from the system by execution of standard report RSPO1041.
After that try to re run the same & take a sample printout to check again.
Regards,
Gaurav

ABAP Run time Error whle executing the Balance sheet report in FGI0

Hi,
I am getting the below ABAP Run time error while executing the Balance Sheet report in FGI0.It was working before but now it is giving the error.Kindly help me in solving this.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          06/12/2009 15:17:17
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     RAISE RKD_CONDITION_READ       (internal error)
     Long text of error message:
      Diagnosis
          The program was terminated because a situation occurred which
          should not have arisen.
      Procedure
          Analyze the situation and contact SAP.
     Technical information about the message:
     Message class....... "KH"
     Number.............. 299
     Variable 1.......... "RKD_CONDITION_READ"
     Variable 2.......... " "
     Variable 3.......... " "
     Variable 4.......... " "
Trigger Location of Runtime Error
    Program                                 SAPLKYPR
    Include                                 LKYPRU31
    Row                                     36
    Module type                             (FUNCTION)
    Module Name                             RKD_CONDITION_READ
Thanks
Supriya

Hello,
Please refer SAP
Note 971535 - dump when deleting characteristic with hierarchy
Regards,
Ravi

While creating a student through piqstc getting abap run time error

Hi Experts,
I am new to SLCM,
By following Micheal Fan's Basic configuration document,
I have done the basic configuration required for creating a student & maintaining the student file,
But while trying to create a student through PIQST00/PIQSTC getting abap run time error,
Attaching the txt file for complete view of abap error.
Please guide how to resolve this error.
Regards,
Prashanti Swain

Hi Rob,
Thanks a ton, for your quick reply,
But I have not understood the reason of the issue.
As i said I followed Micheal Fan's Document for configuration,
in that document there is no configuration step is defined for Vendor master data.
Could you please explain it in a more detail way.
Regards,
Prashanti Swain

*FBCJ - CASH JOURNAL POSTING - ABAP RUN TIME ERROR*.

Hai,
My problem is, while FBCJ cash journal posting, Error message comes as Programme terminated, short dump is beeing formatted. The screen is quitting out to ABAP RUN TIME ERRORS. Short text of error message- For object, CAJO_DOC2 101, numer range interval 01 does not exist.( I have given the number range, but result is same.) - Pls advice, document type for cash journal is DZ ?.expecting valued support- Iam working on SAP R/3 4.7 enterprise.- TITUS GEORGE.

Hi,
GOto SNUM, Input CAJO_DOC2...
Click on change and click on document number ranges.
Maintain the document number ranges for your company code..
That should solve the problem.
Good Luck
Cheers,
Redoxcube

ABAP Run time error when display the Customs Export declarations

Hi,
I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
While debugging we found that Primary Key of the below structures are not the same
lt_corpar                              type      /sapsll/corpar_t
lt_corpar_ht      type      /sapsll/corpar_k02_ht
Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
Error message short details
Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
     "/SAPSLL/CUHD_LOAD_SELECTION".
    The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
    In the source code you have the termination point in line 144
    of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
Regards,
Pradeep Maddi

Hi,
I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
Proforma Invoice not transferred to GTS
After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
Error details
Runtime Errors         ITAB_DUPLICATE_KEY
ABAP Program           /SAPSLL/SAPLCUHD_SELECTION
Application Component SLL-LEG
You tried to insert an entry into table "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
Regards,
Pradeep

Run time error while Creating IDN and Inbound Delivery

Hi All,
I am getting Run time error while creating Inbound Delivery Notification from Inbound Queue and Inbound Delivery from IDN
After debugging i come to know that system is looking for Patch Level SAPKNA7026 but in my system Patch is upto SAPKNA7022
Is there any OSS notes available to deactivate/resolve this run time error ? I tried 0001798794 Deactivation of hierarchical access functionality but system is still giving me run time error
Regards,
P@M

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

Run Time Error while Entering Quantity in Sales Order

Dear All,
Iam getting Run time Error while iam entering material quantity in sales order.Please find the screenshot of the same.
kindly Help Me.Me. Plz note that we had done a system copy two days back to our new server.
Rgds
Thomson
ST22 Screenshot

Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX
                                    0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson

Run-time error while executing alv grid report

Hi everyone
I m trying to run a alv grid report it is giving a run time error while executing the statement CALL METHOD V_ALV->SET_TOOLBAR_INTERACTIVE.
Actually i added 2 buttons in the toolbar.after that when i execute the report i m getting errors.
<b>Error Analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "TOOLBAR_MENUS_INIT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "ME->M_CL_MENU_BUTTON_VARIANT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.

Hi Dinesh,
Seems you have not initialised ( Instantiated in OO ) the object and / or the parent container.
Check if you have create object for both the parent as well as the alv object.
So when you instatntiate the object of ALV you pass the object ( instantiated before hand ) in the parent container position.
Also you would have to register the events to the object using method. Then only the buttons will finction.
eg :
IF G_CUSTOM_CONTAINER IS INITIAL.
    CREATE OBJECT CUSTOM_CONTAINER_1
           EXPORTING CONTAINER_NAME = CONTAINER_1.
    CREATE OBJECT GRID1
           EXPORTING I_PARENT = CUSTOM_CONTAINER_1.
    CALL METHOD ALV_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
         EXPORTING I_STRUCTURE_NAME = 'VBAK
         CHANGING IT_OUTTAB        = IT_VBAK.
Reward points if useful.

MIGO run time error while excution

Hi,
I have getting run time error while executing MIGO transaction.
Syntax error in program "CL_EX_MB_MIGO_BADI============CP ".
the type "MB_MIGO_BADI" is unknown.
Regards
Abdul

Hi Rashid
The error clearly states that the BADI MB_MIGO_BADI is not present in your system.
Just go to SE18 & enter the name of the above BADI & check if it exists there.
Also if the BADI exists, just check if there is an implementation created for the same.
Hope this helps.
Regards
Abhii

Run time error while using Class gcl_error

Hi All,
I am getting run time error while using class gcl_error
                                      type REF to zsreport_error_handling:
'' Attempt to access a component using 'NULL' object reference (points to nothing).
An object reference must point to an object ( an instance of a class) before you can use it to access components ( variable : ''GCL_ERROR'').
Either the reference point has not yet been set or it has been reset to 'NULL' by a clear statement."
Can you please suggest any solution for this ?
Thanks in advance.

Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX
                                    0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson

ABAP Run time error while doing MIR6

Similar Messages

Maybe you are looking for