ABAP & Workflow for CRM
Hello Buddies,
I have seen so mail threads somewhat near to my doubt but could you please tell me some good link for learning ABAP & Workflow for CRM. Also please advise me, being ABAP-Workflow Consultant which section of CRM is best suitable for me.
Thanks in advance. Your guidance is appreciated.
Warm Regards,
N. Singh
Hi,
ABAP and Workflow for CRM is nothing different and specific to CRM. They are same and at least all the basic concepts are present. There might be some implementation and conceptual differences but they are more of functionality driven.
You start learning SAP CRM Fucntionality which will help you to understand SAP CRM much better. And then you can have a feel of the CRM feature and where and how it's been used to drive the ABAP and Workflow functionality.
Hope this helps. You can scan the forum for good links and resources.
Best Regards,
Samantak
Similar Messages
-
For R/3 to CRM Scenario ,creating ABAP Proxy for CRM which is in Target
In R/3 to CRM scenario it is ok creating ABAP Proxy for CRM which is Target system.if it is possible it is Client Proxy.it is correct or not
Hi,
Client Proxy. When you need to create Proxy for your Sender system then the proxy is generated on the client side and the Class created in Proxy generation is called in a report/FM etc.
Server proxy. The server proxy is created when you are sending the data from SAP XI to the receiving system.
The generation of proxy in both the cases happens on the sender or the receiver system.
Regards
Vijaya -
Having multiple J2EE stacks connected to one CRM ABAP instance for CRM IPC
Hello Experts,
The situation we were looking at is this.
We have 3 distinct teams doing Java development for CRM IPC configurators
Team A - IPC/Ecommerce
Team B - UI
Team C - Order Wrapper
They each wanted to do development in their own landscape (Java Stack)
Additionally, two more landscapes are needed:
a landscape for end 2 end testing of the configuration scenarios
another for a Performance Assessment
To get 5 full dual stack CRM instances was deemed unlikely.
Trying to explore if multiple J2EE's, can be connected to one CRM ABAP system.
It seems we can not, as the CRM ABAP to JEE comminucation is via RFC and there is excatly one RFC_Destination defined per CRM (across all clients). Is this correct?
Thanks
RockyMay be you can wordsmith your requirement to make it clear what each team is doing. Also, please mention what version of CRM / IPC you are talking about.
From what you have said, I guess IPC/E-Commerce is E-Commerce enhancement. If NWDI is in the picture, you have one track for this enhancement.
The UI - I assume is IPC UI. This is also a Java based web application that shares the same Java stack with the E-Commerce application.
What is Order Wrapper? - If it a custom web application you guys are into, I still don't see why they can't use the same Java "stack".
In the development lifecycle, it is sufficient to have only one IPC environment for each phase. The development team needs only one, unless they have a valid reason to have their own Java stack. I bet they need only one.
If the developers are asking about "Sandbox", they can have their own NetWeaver Developer Workplace in their laptop / desktop.
Easwar Ram
http://www.parxlns.com -
Preparing for a project in CRm ABAP .Please help with list of ABAP objects related to CRM which I need to know
Hi Bhole,
Welcome to SDN.
Why dont you put a search on SCN by using your subject line. You will get a lot of information
related to your query.
See [this.|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=abapObjectsfor+CRM&adv=false&sortby=cm_rnd_rankvalue]
Thanks
Nitesh -
ABAP Tools for CRM Web Application
Hello,
I am creating a Web Dynpro Java Application for OM/CRM. I am working with CRM_ORDER_READ, and CRM_ORDER_MAINTAIN Rfcs.
Please tell me the important transactions, tables, etc to trace and evaluate on whats going on when I update from Portal.
Also, Could somebody please help how to debug in ABAP.
Thanks,
Sunita.,HI
Check this out:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ffd5ce90-0201-0010-0e8a-95c5f3e6e703
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f27e290-0201-0010-ff82-c21557572da1
You can debug in abap by placing a "/h" while executing your program,.place the "/h" in the bar where you type in your tcodes.
alternatively, you can set breakpoints in your source code and then run it.
Regards
Ravish Garg<b>
*Reward if useful</b> -
Dear Experts,
I am a beginer to Workflow.
I have a scenario in CRM.
1,The requester logs into portal and creates an activity in CRM PCUI screen.
what i want to do in workflow is
When the requester creates the activity and saves their is a field with a user name.
I want to send a mail to that user name.
and after that the user will acknowledge it, then the requester should get a confirming mail.
After the user completes the task and comes back to the Portal and changes the status to completed.
then the workflow should send a mail to the requester stating that task is completed.
I will be glad if somebody can explain me the steps involved in doing this workflow.
thanks and regards
NeelHi Neel Kamal,
It is simple.
As you said that the responsible person will be found using masters.
You know the initiator of the workflow.
1. Go to the business object, create the subtype of the supertype. SWO1
2. In the Method find the mail id of A and B. Create one more method for finding the status.
3. Have this mail ids in a container element of the method
4. Go SWDD, create a activity step, inside that call the method which is used to find the mail id of A and B.
5. Do the binding between task-->method
and Method-->task
6. Come out and do the binding between task-->workflow container
workflow container-->task
7. Create a send mail step. In element give the B email id container element.
8. Check for the condition for status change
9. If status changed, create a send mail there give the A email id container element.
10. activate the workflow.
Finished
Thanks and Regards
Balaji K. -
Workflow for crm lead creation
Hi,
while creating the lead in crmd_order transaction. i need partnerfunction value in Business object repository. so i have created one subtype for that, then i created the attribute as a data dictonary field then system has asked to generate the code automatically wt is my doubt is is that the correct data system retrieves ( so any body give me the clarity that how to create the attributes and access the attributes in bor )Hi,
I am not sure about Lead transaction but in general Partner Functions are maintained in IHPA table. You can get the Partners based on the object number for Lead. To fetch the correct Partner you need to know the Object number (OBJNR) and partner funtion (PARVW). You can have multiple values.
In your workflow,
1. Create and generate a subtype(Z-business object) for Lead business object BUS2000108 and deligate the same to standard business object. (as suggested by Saumya)
2. Create an attribute in the subtype. the attribute should be a VIRTUAL ATTRIBUTE.
3. Place the cursor on the attribute and click on program, it will generate some code.
4. between Get_property and End_property for your virtual field write the logic such that you get the object number from Lead tables and fetch partners from IHPA table and fill the final attribute using macros.
swc_set_element container <container Name> object-<Container name>.
4. Once the coding is completed, release the attribute and business object and generate subtype.
Now required Partners will be available in workflow.
Hope this helps you in resolving your issue. If you have any additional queries please feel free to reply to this tread.
Regards,
Gautham Paspala -
Include in ABAP class for Workflow
Hi,
In order to use BOR macros inside ABAP class, (From SAP help) came to know that we need to use include <cntn02> .
How to add this include to ABAP class for workflow?
Regds,
AkshayHi Akshay,
Slight difference, I said "keeping the class clean of BOR <i>code</i>". By all means use BO's in the class: basically create a ZCL_MATERIAL, and use BUS1001 as an attribute (I use a naming convention BO_* for these). As long as it's the right type (SIBFLPORB I think - no system handy right now), and the key values are populated correctly the system will instantiate it as necessary. So in WF I can refer to ZCL_MATERIAL.BO_MATERIAL whenever I need any of the BO's functionality.
You are correct though, creating a proper business class which you can instantiate such as material does involve a fair bit of effort and coding to set up. e.g. my last project I ended up creating one ZBOR subtype because all I needed was one new attribute - definitely not worthwhile creating a new class for. (USR01.zEmailAddress for what it's worth).
I've said before somewhere, it's not without pain, so if you're under time pressure etc, then it may be better to do whatever's quickest. There's nothing wrong with using BOR macros, it will still work for quite a few versions. I just meant to say that pure class(y) code is a preferred way to go if it makes sense to do so. This is not always the case.
Hope that helps,
Mike -
Hi,
I like to know about CRM ABAP. I know, it's a language and there is nothing like CRM ABAP. More specifically, I like to know the way and the rules for writing a program in ABAP for CRM. It will be very helpful if any one can provide some documents on it.
Thanks,
KuntalHi,
Check the below links :
Links to CRM Documentation
Brainstorming Discussion - Links to CRM Documentation
http://help.sap.com/bp_crmv340/CRM_DE/BBLibrary/html/BBLibrary.htm
/message/1863167#1863167 [original link is broken]
http://www.ixos.com/local/es/home/products/pro-integration/pro-integration-crm/pro-integration-crm-sap.htm
http://wiki.ittoolbox.com/index.php/Topic:MySAP_ERP
http://www.cadservices.nl/site/cadservices/28/27/Designer_mySAP_PLM_2005.pdf
http://www.unevoc.unesco.org/southernafrica/8-km/SAPKW_SolutionBrief.pdf
CRM material
http://help.sap.com/saphelp_erp2005/helpdata/en/06/4f220a51d173478a0d60f01645d914/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/6a/0e1d3ba1f2ab13e10000000a11402f/frameset.htm
Thanks.
Reward If Helpful. -
ABAP APIs for MDM Workflow Modification
Hello All
I require a help from all of you. Currently I have a particular business case where I need to configure the MDM workflow & do changes & modifications in it via ABAP APIs. Currently we are having Java APIs in plcae.
Can you please tell me whether we have some ABAP APIS for this MDM Workflows, if yes what are their EXact names & functionalitites.
Also can we download them from Service Marketplace.
Please reply ASAP.
Regards
Madhurim BasuHi Madhurim Basu
ABAP API(SAP MDM 5.5.-7.1) are'nt support workflow management
SAP MDM(5.5-7.1) JAVA API are support workflow
More about JAVA API you can read from:
http://help.sap.com/javadocs/MDM/current/
Regards
Kanstantsin -
Can someone share (or) give me an url for learn ABAP-Workflow
Hi all,
can someone share (or) give me an url for learn (or) online sessions for better understanding
ABAP-Workflow? because i'm a new & fresh in this module.
Thanks in advance
Srinivas.....Refer the threads -
Workflow?
workflow
workflow
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMCA/BCBMTWFMCA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPA/WFT200_000.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTOM99/BCBMTOM99.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMLO/BCBMTWFMLO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPA/BCBMTWFMPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPP/BCBMTWFMPP.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMQM/BCBMTWFMQM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMISRE/BCBMTWFMISRE.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSD/BCBMTWFMSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf (it will take some time in Loading - Main Document)
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf (Very Important)
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMTR/BCBMTWFMTR.pdf -
Standard workflow for SO approval process in CRM
Hi all
I would like to know if there is any standard workflow for Sales order approval process. I have tried my best and couldnt come across any.
And also what is the commonly used approval process?
Thanks & Regards
Mui KanvaHi
check workflows: WS10000279 and WS10001068 (aut approval).
But we created our own schema to implement two step approval.
Regards
Radek -
How to change workflow for expired qualification in HR Module
Hi,
My question how to change workflow for expired qualification in HR Module.We need to when date is expired tcode OOQA that system will check and that time workflow should be triggred.
I have serached sap help but i am not understand please below mention URL for SAP help
Link: [http://help.sap.com/saphelp_47x200/helpdata/en/ee/f4c9cafbab11d29ea40000e8215202/frameset.htm]
Please explain step by step how to trigrred workflow for expired qualification?
Please this problem is high and try to solve it.
Thx!
SachinHi,
Why do you want to trigger a wflow and what do you want to do with this trigger. Can you give more details of your exact requirements.
But, if you are looking for how to trigger, you can write a small ABAP pgm and schedule it as a job every night. THis job basically reads the table P1000-ENDDA for expiry date and if it reached today, then you can either trigger the wflow with SAP_WAPI_START_WORKFLOW or use SAP_WAPI_CREATE_EVENT to raise your custom event(for Business Obj. BUS7018, i think this is your BO and there are no std events right now, so you will ahve to add your custom event by extending BUS7018 to ZBUS7018).
Hope I am clear and this helps and if you need more details, reply.
venu -
Disp+work.EXE stopped when installing NW07 for CRM 2007 on Maxdb Windows
Hi,
I am installing NW07 for CRM 2007 on Maxdb 7.7 and Windows 2004 64bit.
The installer cannot start the dispatcher on step 32. The dispatcher starts with green and is running a while but Dialog queue is standstill. After few secodes the dispatcher changes to yellow as become disp+work.EXE stopped.
Any advice? I have checked the RAM and log sizes etc and they seem to be ok. Database is running ok.
System cannot connect the database?
Here is dev_w0 file contets:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid XCR
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2260
Sun Nov 16 16:56:01 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2260) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun Nov 16 16:56:06 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ESITV016LAB_XCR_01 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000EE70050
DpShMCreate: allocated wp_adm at 000000000EE72150
DpShMCreate: allocated tm_adm_list at 000000000EE783A0
DpShMCreate: allocated tm_adm at 000000000EE78400
DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
DpShMCreate: allocated comm_adm at 000000000F3E3FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
DpShMCreate: allocated gw_adm at 000000000F46ACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F46ACE0
DpShMCreate: allocated wall_adm at 000000000F46ACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Sun Nov 16 16:56:07 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( ESITV016LAB) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >ESITV016LAB_XCR_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
Sun Nov 16 16:56:47 2008
ERROR => DpHdlDeadWp: W0 (pid 1608) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 3940) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 636) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 3484) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 3504) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 1108) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 3512) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 3592) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W8 (pid 3616) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W9 (pid 3608) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W10 (pid 3368) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W11 (pid 1388) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W12 (pid 3276) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 1256) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W14 (pid 3400) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W15 (pid 2376) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W16 (pid 3032) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:56:57 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sun Nov 16 14:56:57 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1608 Ended no 1 0 0
1 DIA 3940 Ended no 1 0 0
2 DIA 636 Ended no 1 0 0
3 DIA 3484 Ended no 1 0 0
4 DIA 3504 Ended no 1 0 0
5 DIA 1108 Ended no 1 0 0
6 DIA 3512 Ended no 1 0 0
7 DIA 3592 Ended no 1 0 0
8 DIA 3616 Ended no 1 0 0
9 DIA 3608 Ended no 1 0 0
10 UPD 3368 Ended no 1 0 0
11 ENQ 1388 Ended no 1 0 0
12 BTC 3276 Ended no 1 0 0
13 BTC 1256 Ended no 1 0 0
14 BTC 3400 Ended no 1 0 0
15 SPO 2376 Ended no 1 0 0
16 UP2 3032 Ended no 1 0 0
Dispatcher Queue Statistics Sun Nov 16 14:56:57 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Sun Nov 16 14:56:57 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sun Nov 16 14:56:57 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:02 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ESITV016LAB_XCR_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (4076) (SOFT_KILL)
Stop icman
killing process (3800) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:4076 HANDLE:388)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:03 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4076 HANDLE:388)
wait for end of icman
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:04 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3800 HANDLE:396)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=421
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sun Nov 16 16:57:14 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3800 HANDLE:396)
DpStartStopMsg: send stop message (myname is >ESITV016LAB_XCR_01 <)
NiIMyHostName: hostname = 'ESITV016LAB'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Sun Nov 16 16:57:15 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 312 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 312 (pos=2)
SiSelNRemove: removed sock 312
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 312
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2260) [dpxxdisp.c 10421]
Good Bye .....
BR,
KariHi,
here is the right log content:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Nov 17 10:24:39 2008
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4537]
M sysno 01
M sid XCR
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 2184
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2184) [dpxxdisp.c 1305]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Nov 17 10:24:40 2008
M DpShMCreate: sizeof(wp_adm) 25168 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010E70050, size: 6348592)
M DpShMCreate: allocated sys_adm at 0000000010E70050
M DpShMCreate: allocated wp_adm at 0000000010E72150
M DpShMCreate: allocated tm_adm_list at 0000000010E783A0
M DpShMCreate: allocated tm_adm at 0000000010E78400
M DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
M DpShMCreate: allocated appc_ca_adm at 00000000113E2060
M DpShMCreate: allocated comm_adm at 00000000113E3FA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001146AC30
M DpShMCreate: allocated gw_adm at 000000001146ACB0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001146ACE0
M DpShMCreate: allocated wall_adm at 000000001146ACF0
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Nov 17 10:24:41 2008
M ThInit: running on host ESITV016LAB
M calling db_connect ...
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4537]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10468]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ESITV016LAB_XCR_01 on host ESITV016LAB (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Nov 17 10:24:41 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10688
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2184) [dpnttool.c 327]
BR,
Kari -
What are the pros and cons of installing java+abap stack for portal?
Hi all,
1.What are the pros and cons of installing java+abap stack for portal?
2.what effect it does on the ume options to be choosen??
3.for the purpose of integration of r3,bw and crm on portal and crm 4.0 60.2.3 business package which option of stack(java or abap or both)will be good option and which ume option while installation should be choosen?
regards
RajendraHi Rajendra,
The NetWeaver Installation Master Guide offers some good scenarios on the pros and cons:
https://websmp201.sapag.de/~sapidb/011000358700005412792005E.pdf
In a nutshell:
ABAP+JAVA
Pros
- Decrease # of servers required to administer the portal
- Less costly
Cons
- Upgrades could be dependent on ABAP and Java release level
- Additional load on the server due to ABAP stack
- Limited scalability
JAVA and ABAP on separate server
Pros
- Improved performance
- Allows each system to be single-use purpose therefore downtime does not affect other components
- More scalable
Cons
- Adds complexity to landscape
- Additional costs
Regards,
Thomas Pham
Maybe you are looking for
-
Why sld is defined in xi seperately
HI Friends, i have a doubt , we have so many middle wares , among those sap xi is one middle ware why sap xi uses SLD seperetly to define business systems and technical systems why not in other middle wares Thanks in advance Anil Mandava
-
i'm using a hdmi cable from a macbk ro to a samsung tv monitor: no sound coming from tv, only from the computer... any ideas? thanx....rhea
-
SAP Triversity: Receiving Goods against Purchase Order created in SAP
Hello, We are working on a SAP Retail scenario where we are using SAP Triversity as our POS and Backoffice solution and SAP IS Retail as backend ERP. We have SAP XI and SAP POS DM (On SAP BW) installed also. We are trying the following scenario: 1. C
-
Jaas.jar conflict in Weblogic 6.1 cluster
We are using a Custom realm for Weblogic which communicates with Tivoli Policy director for user authentication and authorization. For communicating with PolicyDirector, We need to have IBM's jaas.jar as a JDK extension(in jre/lib/ext directory)along
-
Why can't I install Firefox?
Firefox would open, but instantly freeze, so I couldn't even reset it. The only way to close it was through the task manager. I decided the only thing I could do was uninstall and reinstall, so I did that. It downloaded but the set up wizard never st