About alsa Configuration on My PC.

hello guys,
I'm a newbie in arch linux and i install it in not more than 3 days before. I used ubuntu for about one year, but now i feel it too tumid. i use arch recommended by a friend just becouse i feel it's simpler and is a lightweight version. But now I need some help about my book's sound because I do almost every way to configure alsa but finally in vain. I'm sure that my book's sound worked when i was in ubuntu. here are some information about my alsa:
http://www.alsa-project.org/db/?f=8886a … e0c7d7cebb
many thanks if anyone could give me some help.

What exactly is not working? You get absolutely no sound? Did you follow the relevant wiki articles?

Similar Messages

Who can provide a link about advanced configuration of Java.util.logging?

Who can provide a link about advanced configuration of Java.util.logging?

Want to implement configurable handler attributes. For each handler has its own attribute set. I tried to implement a few handlers that extend FileHandler (actually the handlers do nothing, just for distingusih purpose), and put the customized handler attributes in configuration file and use logManager.readConfiguration() to load the configuration, somehow it does not work, but if I change the handler to standard handler like FileHander in configuration file, it works.

Documentation about AdobeForms (Configuration on 2004s)???

Where can i take Documentation about AdobeForms (Configuration on 2004s)?????????????????

Hi Marcus,
this is the official link
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000629470&
Regards, Angel

Pls tell me something about Bank configuration

Hi,
Please tell me something about Bank configuration
Thanks

Hi,
Please refer the following for Bank Configuration steps:
Bank configuration:
To set up Electronic Bank Statements (EBS)
1. Create House Bank and Account ID (FI12)
2. Setup EDI Partner Profile for FINSTA Message Type (WE20)
3. Configure Global Settings for EBS (IMG)
- Create Account Symbols
- Assign Accounts to Account Symbols
- Create Keys for Posting Rules
- Define Posting Rules
- Create Transaction Types
- Assign External Transaction Types to Posting Rules
- Assign Bank Accounts to Transaction Types
4. Define Search String for EBS(Optional)
- Search String Definition
- Search String Use
5. Define Program and Variant Selection
Additional information is also available in the SAP Library under:
Financial Accounting > Bank Accounting (FI-BL) > Electronic Bank Statement >
Electronic Account Statement Customizing.
Bank Reconcilliation Statement
The following are the steps for BRS:
Create Bank Master Data - This can be created through T.Code FI01 or you can also create the house bank through IMG/FA/Bank accounting/Bank account
2. Define House Bank
3. Set up Bank selection payment programe- IMG/FA/ARAP/BT/AUTOIP/PM/Bank selection for payment prg.
a. setup all co codes for payment transaction - Customer and vendors
b.setup paying co codes for payment transactions
c.setup payment method per country
d.setup payment method per co code for payment transaction
e.setup bank determination for payment transaction
Please go for Cheque mangement using T code FCHI (IMG/FA/ARAP/BT/OP/AutoOp/PaymentMedia/CheckManagement) and for void reasons FCHV. You can create Bank Reconcilliation statement by TC FF67 (SAP/AC/Treasury/CashManagement/Incomings/ManualBankStatement) . Don't forget to keep the opening Balance as zero. Use FBEA for post process.
All the steps together will lead to (FF67) Bank reconciliation statement.
Thanks,
Prithwiraj.

About JSTL configure

Hi,all
I have a question about JSTL configure. I' m learning jsp ,but i don't know how can i use the JSTL under the tomcat5.0 and jdk1.5 in the windows os.
I have installed the Tomcat 5.0 and jdk1.5 in the windows sys right, copyed the standard.jar and the jstl.jar to my working forlder'WEB-INF/lib forlder,and copyed the 15 .ltd file to the WEB-INF forlder. And i have configure the web.xml file .
But JSTL did not worked.
I come from china,is a new. Who can help me,giving me some advises?

Make sure that you have the version 1.1 of jstl. Go to [url http://jakarta.apache.org/site/downloads/downloads_taglibs.html] this jakarta page and click on the jstl 1.1 taglibs.
Copy the jstl.jar and standard.jar onto WEB-INF/lib of your web application.
You neednt copy the tlds seperately. The server will pick up the tlds from the jar files. Neither need you have to have web.xml entries.
Specify that your web application complies to servlet 2.4 standards. Note Tomcat 5.x and above implements the servlet 2.4 spec.
Also your web.xml should have the following declaration
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
    version="2.4">
//other elements
</web-app>Finally open a jsp, define the following taglib directive and you are on your way -
<%@page import="java.util.*" %>
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<%
     List data = new ArrayList();
     data.add("A");
     data.add("B");
     data.add("C");
     request.setAttribute("col",data);
%>
<c:out value = "${col}"/><br>
<u>Using a for loop</u>
<c:forEach items="${col}" var="eachItem">
   ${eachItem}
</c:forEach>ram.

Question about SSLM configure

I have a question about our SSLM configure, please see the following example:
service aa-SSL
virtual ipaddr 172.25.17.15 protocol tcp port 443 secondary
server ipaddr 172.24.92.6 protocol tcp port 80
certificate rsa general-purpose trustpoint www.app.aa.com
no nat server
inservice
crypto pki trustpoint www.app.aa.com
revocation-check none
rsakeypair www.app.aa.com
crypto ca import www.app.aa.com pkcs12 tftp:xxx
======================================
Once we finish the configuration, we could find the corresponding cer in SSLM, like:
crypto pki certificate chain www.app.aa.com
My first question is how to remove this cert if we want to decommission aa-ssl environment? Is it only with âno crypto pki certificate chain www.app.aa.comâ
If we have another environment like www.pre.app.aa.com shared the same VIP with www.app.aa.com. My second question is could I create only one ssl entry with wildcard like the following configuration:
service aa-SSL
virtual ipaddr 172.25.17.15 protocol tcp port 443 secondary
server ipaddr 172.24.92.6 protocol tcp port 80
certificate rsa general-purpose trustpoint *.app.aa.com
no nat server
inservice
Please advice! I would appreciate it!

You can remove the certificate but you need to be in certificate chain configuration mode to delete certificates. An example configuration is provided here
http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_c5.html#wp1043434

Questions about migrating Configurator 4 PS panel to Extension Builder 3.

Hello,
I am in the process of creating a set of Photoshop tools that I'm hoping to release on Adobe Exchange in the very near future. The tools are a set of javascript files that are executed through a simple panel interface consisting of 4 buttons. There is also a logo at the top of the panel that links to a tutorial section on my website (kind of like the Adobe Paper Texture Pro panel if you're familiar with it).
I initially created the panel using Configurator 4 (RIP). Unfortunately, I only recently found out about Adobe's plans to remove Flash based Extension Panel functionality. I've switched over to Extension Builder 3, so I can submit my Extension to Adobe for approval as soon as possible. The main issue is that I am not a programmer. I'm learning, and I'm actually quite pleased with the results so far, but there have been plenty of headaches along the way. As for the migration to Extension Builder 3, I've been able to work around or find solutions to most of the issues, but there are still a few that I'm hoping someone can shed some light on:
How do you create a 'fly-out' menu for a panel? I wasn't sure how to do this in Configurator 4 either, but at least they provided an 'About' menu option above the standard 'Close' and 'Close Tab' menu options.
This is minor, but when dragging the panel around, I noticed that the contents of the panel disappear and you only see the gray background color. The panel from Configurator didn't do this (you could see the contents at all time). Is there a way around this?
As mentioned above, I have a logo that used to link to the tutorial for the tool on my website. I searched around, and it seems like something that is simply not possible to do anymore. This is unfortunate, because I wanted to provide users with easy access to the tutorial page. Is it possible to open a new panel from another panel? That way, I could at least have the tutorial open as a new panel within Photoshop. (I just noticed a potential answer to this in another thread - though it may be slightly over my head)
I took a look at the HTML5, ADOBE authored Adobe Layer Renamer, but that just makes me more nervous because it has the dragging problem AND no additional fly-out menus. Ideally, I'd prefer it if users didn't have to open Adobe Exchange just to see instructions or information about my Extension.
Sorry for the lengthy post, but I appreciate any assistance with these issues!
Lee

Hello Lee,
My name is Jeff.   I am similar to your situation where I am not really much of a programmer, but using scripts exported to .jsx files from actions in PS, and I was using Configurator to build a really massive (hundreds of buttons/scripts accordians etc) panel in 3.0, released it publicly, but retracted because of certain issues and then finally realizing I need to migrate it all over to HTML5 and Extension Builder 3.
I am also at about the same point as you... although I've been trying out the jquery frameworks to build my tabs and other GUI elements... figured out last week how to use custom images for the buttons etc.
I don't know if I am going to need a panel-flyout menu option but I am trying to figure out how to put in regular text-box or pull-down menus... in configurator I found a neat trick to drag and drop accordian-containers into each other... then it acts like a pull-down menu when you have buttons in there.     The problem is html5 and extensionbuilder 3 do not work like this... I can't figure out how to make nested tabs yet or have a GUI pull-down or text-box actually send information to my .jsx files and change them.
Let's keep this forum active and help each other, we all have great ideas to contribute to the extensability of these long-cherished tools and it should not be hard... or else we're all just going to go back to using actions, lol.      For now, I have avoided some issues in configurator, still exporting my panels but with the upcoming release of non-flash-support in PS then people won't be able to use them unless they had the previous PS installed already.      However, you can create your own installers to place the extensions into the right folders, you don't need the .ZXP or exchange to publish or sell your extensions, it's only for a pathway that helps us all to legitamize our projects and become producers through the exchange portal or add-ons or whatever it ends up being.   But personally I am using a freeware program that makes simple installers and having it place the folders into the extension panels folders... then when PS opens there is the extension -- that is all that Extension manager is doing... taking your ZIP (ZXP) and unzipping it to the right folders.
What upsets me is how easy they made it with configurator for me to make a very advanced panel... then pulled the rug out and now it is going to take a lot of work and learning for me to understand how to build the same GUI panels you see attached but in HTML 5.... I will try to share and help out especially with people like us where we have built something in configurator and now we need to port/migrate it to html5/extension builder 3.     Easier said than done. :/
http://adobe.ly/1nrrQjg
http://adobe.ly/1j3U27z
http://adobe.ly/1hYh2nF

About SD configuration

Dear Expert,
I have a requirement,I want to change the price date(VBRP-PRSDT) of item in VF01,Now,this field is grey.But I don't know how to configuration this.
Can you give me some tips?
Edited by: chaoxu pan on Sep 16, 2010 8:51 AM

I konw this date from sales order,But,the default configuration is grey about this field in VF01,Now,I wouldn't change pricing date in sales order.I want to change pricing date of item when creating Billing.
Not possible to have this field greyed out by default. you might have used USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)
In SPRO,I see the configuration of pricing type is "G"(Copy pricing elements unchanged and redetermine taxes).I don't konw this configuration affect the pricing date whether or not.
this setting will copy all prices unchanged for all condition types except for TAXES
it iwll not have impact on DATE

A question about CAR configuration

I read the configuring CAR on CCO. I'm a little confused about the conform value. here the URL of the article:
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800c75ce.html
per the article, to limit a speed of a interface:
Router(config-if)# rate-limit {input | output} bps burst-normal burst-max conform-action action exceed-action action
here is it's 1st sample:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
interface hssi 0/0/0
rate-limit output 15000000 2812500 5625000 conform-action transmit exceed-action drop
ip address 10.1.0.9 255.255.255.0
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
The CIR is setup to 15Mbps, the normal burst size is 2812500bytes(22.5Mbits), excessed burst size is 5625000bytes(45Mbits)
I think it's mean during a long-term, the average transmit speed is limited to 15Mbps, but at a specific time, the traffic
can be allowed to 22.5Mbits. and a specific time, 44.99Mbits can be allowed as long as the CIR is under 15Mbps.
but below is another sample:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
interface Fddi2/1/0
rate-limit input access-group rate-limit 100 80000000 64000 80000 conform-action transmit exceed-action drop
ip address 200.200.6.1 255.255.255.0
access-list rate-limit 100 00e0.34b0.7777
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
here, it wants to limit a specific host. the CIR is 80Mbps. normal burst size is 64000bytes(512kbits), exceeded burst size
is 80000bytes(640kbits).
then at a specific time, the traffic can't pass 640kbits, if it pass, will be dropped. My question is since no time the
traffic can more than 640kbits, what's the CIR 80Mbps for?
Thank you a lot.
Regards,
Sha

see the following example. This may help
Chris
Subrate IP Services Example
The following example illustrates how to configure a basic CAR policy that allows all IP traffic. In the example, the network operator delivers a physical T3 link to the customer, but offers a less expensive 15 Mbps subrate service. The customer pays only for the subrate bandwidth, which can be upgraded with additional access bandwidth based on demand. The CAR policy limits the traffic rate available to the customer and delivered to the network to the agreed upon rate limit, plus the ability to temporarily burst over the limit.
interface hssi 0/0/0
rate-limit output 15000000 2812500 5625000 conform-action transmit exceed-action drop
ip address 10.1.0.9 255.255.255.0
Input and Output Rate Limiting on an Interface Example
In this example, a customer is connected to an Internet service provider (ISP) by a T3 link. The ISP wants to rate limit transmissions from the customer to 15 Mbps of the 45 Mbps. In addition, the customer is allowed to send bursts of 2,812,500 bytes. All packets exceeding this limit are dropped. The following commands are configured on the High-Speed Serial Interface (HSSI) of the ISP connected to the customer:
interface Hssi0/0/0
description 45Mbps to R1
rate-limit input 15000000 2812500 2812500 conform-action transmit exceed-action drop
ip address 200.200.14.250 255.255.255.252
rate-limit output 15000000 2812500 2812500 conform-action transmit exceed-action drop
The following sample output shows how to verify the configuration and monitor CAR statistics using the show interfaces rate-limit command:
Router# show interfaces hssi 0/0/0 rate-limit
Hssi0/0/0 45Mbps to R1
Input
matches: all traffic
params: 15000000 bps, 2812500 limit, 2812500 extended limit
conformed 8 packets, 428 bytes; action: transmit
exceeded 0 packets, 0 bytes; action: drop
last packet: 8680ms ago, current burst: 0 bytes
last cleared 00:03:59 ago, conformed 0 bps, exceeded 0 bps
Output
matches: all traffic
params: 15000000 bps, 2812500 limit, 2812500 extended limit
conformed 0 packets, 0 bytes; action: transmit
exceeded 0 packets, 0 bytes; action: drop
last packet: 8680ms ago, current burst: 0 bytes
last cleared 00:03:59 ago, conformed 0 bps, exceeded 0 bps
it's from the article you were looking at near the bottom..
Chris

About QoS configurable thresholds...

Hey,
I was reading through QoS guides and got confused about the threshold things.......
According to document,
you can use following command to configure maximum memory allocation for egress queue.
mls qos queue-set output qset-id threshold queue-id drop-threshold1 drop-threshold2 reserved-threshold maximum-threshold
you can use following command to configure allocated memory for egress queue.
mls qos queue-set output qset-id buffers allocation1 ... allocation4
So now questions:
1. Why queue-set? There will be 4 queue for egress anyway...
2. If queue-set is useful feature, Why no queue-set for ingress?
3. Why multiple thresholds? For ingress, there will be one threshold per queue.
4. When is drop-threshold1 used? When will drop-threshold2 used?
Thanks,
/S

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Or, perhaps this isn't the best forum for this question.
See if this document helps: https://supportforums.cisco.com/docs/DOC-8093

About the configuration of the iMac

Hello !
By about two years, I plan to buy a iMac, but I need to know if it is possible to configure it directly to the Apple Store, because I have no credit card, no PayPal or other solution to buy online.
I would also like to know if it is more expensive to buy in store rather than online (Is that I understand reading somewhere).
So, my question is : Can you configure your iMac to the Apple Store, like on the site? And is that it is more expensive than buying online?
Have a good evening,
P.S : My native language is the french, so i'm sorry for the quality of my english.
TRADUCTION
Bonsoir !
D'ici environ deux ans, je prévoie de m'acheter un iMac pour mes études, mais j'aurais besoin de savoir s'il est possible de le configurer à l'Apple Store, comme on le peut sur le site, car je n'ai aucune carte de crédit, ni aucun compte PayPal ou autre solution permettant d'acheter en ligne.
J'aimerais aussi savoir si ça revient plus cher d'acheter en magasin plutôt que sur le web (c'est ce que j'ai cru comprendre en lisant quelque part).
Donc, ma question : Peut-on configurer son iMac à l'Apple Store, comme sur le site ? Et est-ce que c'est plus cher que d'acheter en ligne ?
Bonne soirée,
P.S : Ma langue d'origine est le français, donc je m'excuse d'avance pour la qualité de mon anglais.

ah, that's too bad. So needless to specify the seller accurate performance that I want ? But for example, if I want a SuperDrive reader with my Mac, I need to buy it separately ? But it will be more expensive than if I configured my Mac on the site by including the reader or it will be the same price? In brief, if I have to buy everything separately, it will be the same price as if I had bought it on the site?

[Solved] Need a hand with alsa configuration

Configuring ALSA has always been a little over my head, but I try never-the-less. It would seem I've yet to get it quite right, and I could use a bit of help.
Objectives:
- For things to "just work"
Current Issues:
- No sound from Flash
- Can't open alsamixer "cannot open mixer: Invalid argument"
Current Non-Issues:
- I have sound in other things I use (KDE, Pidgin, Clementine, MPlayer, VLC, Xine...)
- Mixing seems to be working fine (for example: I can play something with Clementine and VLC at the same time, even if one is stereo and the other is surround)
- "both" seems to be functioning as intended (things are output through my computer speakers and stereo at the same time)
My asound.conf
pcm.!default plug:both
pcm.!surround51 plug:both
pcm.!surround40 plug:both
defaults.pcm.rate_converter "samplerate_best"
pcm.intel {
type dmix
ipc_key 456479
ipc_key_add_uid true
slave {
pcm "hw:0,0"
period_time 0
buffer_size 65536
buffer_time 0
periods 128
rate 48000
channels 6
bindings {
0 0
1 1
2 2
3 3
4 4
5 5
pcm.nvidia {
type dmix
ipc_key 78632
ipc_key_add_uid true
slave {
pcm "hw:2,7"
period_time 0
buffer_size 65536
buffer_time 0
periods 128
rate 48000
channels 6
bindings {
0 0
1 1
2 2
3 3
4 4
5 5
pcm.both {
type route;
slave.pcm {
type multi;
slaves.a.pcm "intel";
slaves.b.pcm "nvidia";
slaves.a.channels 6;
slaves.b.channels 6;
bindings.0.slave a;
bindings.0.channel 0;
bindings.1.slave a;
bindings.1.channel 1;
bindings.2.slave a;
bindings.2.channel 2;
bindings.3.slave a;
bindings.3.channel 3;
bindings.4.slave a;
bindings.4.channel 4;
bindings.5.slave a;
bindings.5.channel 5;
bindings.6.slave b;
bindings.6.channel 0;
bindings.7.slave b;
bindings.7.channel 1;
bindings.8.slave b;
bindings.8.channel 2;
bindings.9.slave b;
bindings.9.channel 3;
bindings.10.slave b;
bindings.10.channel 4;
bindings.11.slave b;
bindings.11.channel 5;
ttable.0.0 1;
ttable.1.1 1;
ttable.2.2 1;
ttable.3.3 1;
ttable.4.4 1;
ttable.5.5 1;
ttable.0.6 1;
ttable.1.7 1;
ttable.2.8 1;
ttable.3.9 1;
ttable.4.10 1;
ttable.5.11 1;
ctl.both {
type hw;
card 2;
device 7;
ctl.!default {
type hw;
card 2;
device 7;
ctl.nvidia {
type hw;
card 2;
device 7;
ctl.intel {
type hw;
card 0;
device 0;
For posterity, my revised asound.conf
pcm.!default plug:both
pcm.!surround51 plug:both
pcm.!surround40 plug:both
pcm.!dmix plug:both
defaults.pcm.rate_converter "samplerate_best"
pcm.intel {
type dmix
ipc_key 456479
ipc_key_add_uid true
slave {
pcm "hw:0,0"
buffer_size 5440
period_size 1088
rate 48000
channels 6
bindings {
0 0
1 1
2 2
3 3
4 4
5 5
pcm.nvidia {
type dmix
ipc_key 78632
ipc_key_add_uid true
slave {
pcm "hw:2,7"
buffer_size 5440
period_size 1088
rate 48000
channels 6
bindings {
0 0
1 1
2 2
3 3
4 4
5 5
pcm.both {
type route;
slave.pcm {
type multi;
slaves.a.pcm "intel";
slaves.b.pcm "nvidia";
slaves.a.channels 6;
slaves.b.channels 6;
bindings.0.slave a;
bindings.0.channel 0;
bindings.1.slave a;
bindings.1.channel 1;
bindings.2.slave a;
bindings.2.channel 2;
bindings.3.slave a;
bindings.3.channel 3;
bindings.4.slave a;
bindings.4.channel 4;
bindings.5.slave a;
bindings.5.channel 5;
bindings.6.slave b;
bindings.6.channel 0;
bindings.7.slave b;
bindings.7.channel 1;
bindings.8.slave b;
bindings.8.channel 2;
bindings.9.slave b;
bindings.9.channel 3;
bindings.10.slave b;
bindings.10.channel 4;
bindings.11.slave b;
bindings.11.channel 5;
ttable.0.0 1;
ttable.1.1 1;
ttable.2.2 1;
ttable.3.3 1;
ttable.4.4 1;
ttable.5.5 1;
ttable.0.6 1;
ttable.1.7 1;
ttable.2.8 1;
ttable.3.9 1;
ttable.4.10 1;
ttable.5.11 1;
#ctl.both {
# type hw;
# card 2;
# device 7;
#ctl.!default {
# type hw;
# card 2;
# device 7;
ctl.nvidia {
type hw;
card 2;
device 7;
ctl.intel {
type hw;
card 0;
device 0;
Last edited by dwidmann (2011-11-03 15:18:46)

rwd wrote:What happens with no asound.conf? I have never needed an asound.conf for alsamixer /alsa to work. Have you tried the steps in 'https://wiki.archlinux.org/index.php/Ad … chitecture' ?
Well, without an asoundrc or asound.conf, you can't duplicate output to multiple cards, nor can you have dmix with both stereo and surround sources at the same time. I looked at that page, but the page that ended up being the most helpful to me was this one, I think.
brebs wrote:
My system uses:
period_size: 1088
buffer_size: 5440
Your period_size is small - I'd try setting period_size and buffer_size to exactly mine, and getting rid of the other period/buffer lines in your config.
Thanks, this worked!! The sound-in-flash issue is no more.
I still can't open alsamixer though.
Last edited by dwidmann (2011-11-03 13:43:47)

Simple question about JSF configuration

I am using Tomcat 5.0 in Windows XP SP2. When I create a web application with JSF and put it into {tomcat_home}\webapps\, everything works perfect. But when I add a context path in Tomcat's server.xml such like
<Context docBase="C:\works\java_projects\jsf_test" path="/jsf_test" reloadable="true" debug="0"/>
And then I put same web application into this context path and try the url like http://machinename:8080/jsf_test/test.faces, it gives me exception as follow
I wonder if anyone knows about that? Thanks a lot!!
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet.init() for servlet Faces Servlet threw exception
     org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:462)
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
     org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     java.lang.Thread.run(Thread.java:595)
root cause
java.lang.NullPointerException
     javax.faces.webapp.FacesServlet.init(FacesServlet.java:144)
     org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:462)
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
     org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     java.lang.Thread.run(Thread.java:595)
note The full stack trace of the root cause is available in the Apache Tomcat/5.0.28 logs.
:

FacesServlet.init() processes only the followings: facesContextFactory = FactoryFinder.getFactory(FACES_CONTEXT_FACTORY);
applicationFactory = FactoryFinder.getFactory(APPLICATION_FACTORY);
application = applicationFactory.getApplication();
lifecycleFactory = FactoryFinder.getFactory(LIFECYCLE_FACTORY);
lifecycle = lifecycleFactory.getLifecycle(lifecycleId);NPE occurrs at the third line when it can't find ApplicationFactory.
Check how your container loads the class.

Few questions about alsa and vlc

how to set sound via spdif in vlc ?
how to set default sound output as spdif ? (ESI Juli@)
how to disable dmix and set sampling to 192khz ?

Don't know too much, but S/PDIF would be handled by ALSA not VLC...
Check out asound.conf for default output...
Check autostart for DE/WM...
Might look into using JACK instead of ALSA...

ITunes wont open somehting about audio configuration

okay i updated to 7.2 and it was working fine then yesterday i try and open it and it says this
"iTunes cannot run becasue it has detected a problem with your audio configuration"
any ideas or suggestions?
thx for reading

Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes 7 for Windows: iTunes has detected an audio configuration problem

About alsa Configuration on My PC.

Similar Messages

Maybe you are looking for