About Disk Utility's secure erase options

Hello!
I am going to format the drive to reinstall the OS, it's time for a full cleaning!
I see that I have some options to erase the disk:
- Don't erase data
- Zero out data
- 7-Pass Erase
Is there any difference about the performance of the disk before the erase? I don't talk about the possibility or security of the erased data; I ask for the disk speed and smooth.
Thank you.

Those options will have no effect on the performance of the drive.

Similar Messages

  • Disk Utility Error - Secure Erase Free Space failure

    I have encountered a problem which I can't solve: I've used the secure erase feature to wipe unused parts of the disk before without problem. Now I get the following error message each time I try to use Disk Utility to do so:
    "Secure Erase Free Space failed
    Secure Erase Free Space failed with the error:
    Could not create temporary file"
    I tried it with the hard disk on the computer, my external backup disk, and a USB thumb drive. Same error message in each case.
    If anyone knows the solution I would appreciate the help. I've scoured these fora and the internet to no avail.
    Thanks.

    Tried booting from another hard drive and running Disk Utility Repair Disk? follow up with Disk Warrior after that.
    I would just do a full volume clone, reinitialize, and restore.

  • My disk utility refuses to erase my hard drive

    I've been trying for a few years to find some way to reset my mac to factory settings. Every last thing I've tried has failed. I was hoping the disk utility thing to erase it would work but the erase button never lets me to click on it

    If you previously encrypted your hard drive (FileVault2) then your drive was enrolled in apple's CoreStorage format. If so, diskutility won't let you perform certain operations, and you'd first need to use advanced diskutil options from the command line ( $ diskutil cs delete ... ) to trash the CoreStorage volume.

  • Disk Utility failure to erase/initialize

    I have a 1 TB WD MyBook Studio Edition. I sent this drive to a firm that does video conversions (from film to digital). Drive returned with expected (good) results, but now I can't write anything onto the drive - says I can only read. So I copied all files on the drive to another disk, then used Disk Utility to initialize. First Aid tab action buttons are all greyed out. Erase tab shows default format as MS DOS. I changed to Apple Extended (Journaled) and pressed OK. Process starts, but fails after a few seconds with error "Write Failure". Now disk won't mount when I attach it - only Disk Utility "sees" drive, but fails each time I try to Initialize/Erase.
    What's up, and how do I correct?
    Thanks

    If you haven't fixed this yet, you may be able to use Disk Utility to completely erase and reformat the disk.
    Click the top line of the drive, then the Partition tab. Click +1 partition+ (or however many you want) under *Volume Scheme*, then Options at the bottom. Select GUID for an Intel Mac, +Apple Partition Map+ for a PPC Mac. Setup the partition(s) you want to use on the Mac as +OSX Extended (Journaled),+ then click Apply.

  • Are my photos completely gone if i went into disk utility and clicked erase, or can i recover them?

    i wanted to put my macbook pro back to factory settings and re installl the disk. so i went into disk utility and clicked erase, after that i realized i did not put my pictures on my external drive and now i'm wonder even though i pushed erase in disk utility for my HD are my photos just gone off my computer and hidden in files that i have to recover. because i tried a few softwares that i downloaded and i found some of my photos but couldnt get them cause the software was a demo.
    main question is even though i clicked erase HD and my pictures aren't on when i re install the mac DVD can i still recover them somehow??

    I'm assuming that you were booted from the Mac install disk or recovery partition when you clicked Erase? (It's impossible to erase a disk you're booted from, at least using Disk Utility).
    Do you have a backup of your computer, perhaps using Time Machine?
    If not, and you still want to recover your pictures, first, STOP. Do not re-install Mac OS X. Installing the system and applications will overwrite your hard drive and potentially permanently lose your deleted files.
    The only way you can retrieve your files is by using data recovery software such as Data Rescue. No, it's not cheap, but you have to decide what your photos are worth to you. You would need to run it from another Mac, ideally, and connect to your Mac using target mode.
    If you're uncomfortable with that, you should seek a local reputable Mac/data recovery consultant.
    The utility kaz-k points you to is not a solution to your problem. It's an Unerase Trash program.
    Matt

  • Disk Utility missing the Erase tab

    Tonight, I was attempting to reformat my Mac Mini FileVault encrypted hard drive. I have Mountain Lion 10.8 installed on it, and I have a bootable Mountain Lion USB stick.
    I booted from the USB device, and first tried to format. Everything was greyed out. I had to "Unlock" the encrypted drive and then it was available.
    I then tried to do an Erase, and it failed with an error I didn't catch, and then only "Macintosh HD" shows up (no volume below it in Disk Utility) and the Erase tab is unavailable. The Partition tab is also locked and nothing can be chosen.
    I can Verify and Repair with no problems, but I am unable to repartition or erase the drive.
    Any thoughts?

    I ran in to this issue once again, when trying to clean install Mountain Lion on my MacBook. I rebooted to the Recovery partition, and tried to format/erase using Disk Utility and that failed and left the system where only the drive (Macintosh HD) would show up, and Erase was greyed out. I was unable to format using the command line due to seeing the message:
         "The disk is in use by Core Storage as a Physical Volume"
    I found a solution here:
    http://apple.stackexchange.com/questions/59026/how-to-install-mountain-lion-on-a -disk-that-cannot-be-formatted-in-recovery-mode
    See the post by Anderson, where he shows how to clobber this Core Storage volume:    
    Basically, you need to run diskutil CoreStorage list from Terminal. Identify the logical CoreStorage volume from that list and note the UUID string.
    Then type diskutil CoreStorage delete UUID where UUID is the string you identified.
    You can then partition with Disk Utility and run a Mountain Lion install.
    This did the trick for me, and I was then able to 0-byte format the drive and do a clean install over the internet.

  • How to restore macbook pro 10.7.2 to factory settings .. disk utility what to erase?

    how to restore macbook pro 10.7.2 to original settings .. step by step.. in the disk utility what to erase?

    If the computer came with OS X 10.6 Snow Leopard installed,
    you have to erase the drive and install OS X 10.6 Snow Leopard.
    You can buy 10.6 Snow Leopard disc from Apple Store for 20 dollars;
    Apple Store: 1-800-692-7753.
    Best.

  • Is my HD Dead? Reformat Disk Utility Error: secure disk erase failed with the error could not open disk.

    Hi,
    Fed up with seeing the spinning beach ball I decided to reformat my MacBook Pro...
    After backing up everything on an external hard drive I put in the OSX install DVD, restarted the machine and held down 'C'.
    I followed the install prcedure, clicking next a few times etc...
    I then went into Utilities > Disk Utility. I chose 7-Pass to erase the Macintosh HD and set it off erasing.
    I checked the process an hour in and message on screen read:
    Secure disk erase failed with the error:
    could not open disk
    The internal hard drive no longer exists in the disk utility so I cant retry erasing it.
    The only thing that appears in disk utility is the OSX install DVD.
    I can't even shut down the mac as everything under the apple tab is greyed out!
    I'm guessing this means my hard drive is broken right?
    If anyone has any other ideas of what to try I'd really appreciate that.
    How do I turn the machine off?
    If my hard drive is gone then should I consider getting an SSD drive?
    Any recommendations for such a drive would be great.
    Hope you can help!

    Did you partition the drive?
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

  • Brand new Mac, had to erase drive through disk utility as time machine back up failed. Now disk utility only has the option to install Mountain Lion which my Mac won't allow. Anyone any ideas as my Mac won't load anything up but disc utility!

    Brand new Mac, had to erase drive through disk utility as time machine back up failed on initial setup, USB cable popped out Now can only access disk utility as won't load to log in screen. The only has the option in disc utility is to re-install Mountain Lion which my Mac won't allow or loading another time machine back up but after an hour of it processing, that didn't resolve the issue either! The time machine back up is the latest back up of my Mac Book Pro which was using OS X Maverix. I'm guessing I'm going to have to take my Mac to the store but that would be a hassle so does anyone have any ideas?

    Follow this guide using another Mac.
    Insert your newly created Mavericks USB into you Mac, press the power button and then hold down 'option,' until it gives you an option to boot from the USB. You will then be able to erase the internal disk with Disk Utility and reinstall Mavericks straight after.
    After that you should be able to use Migration Assistant to restore your applications and user data.

  • Disk utility error when erasing an external hard drive

    Hi,
    Not sure if this is the most appropriate fourm list to post this but I thought I'd give it a try.
    I am running snow leopard on my MBP and am trying to use disk utility to erase and format an ext. HD.  While the disk icon does not show up on the desktop when I connect it to my mac, Disk utility does show the ext. hd in the left column, but no matter what format I try, even just using one partition and selecting zero out all data, I get the following error: "disk erase failed with the error: POSIX reports: The operation couldn't be completed. Cannot allocate memory".
    Is the hd dead?  Are there other options?  I do have disk warrior, version 4.1.1 and it does not regonize the ext. hd.
    Please advise.
    Thanks,

    Thanks for the reply. Yes, I did select the ext hd as the one I wanted to erase (my internal hd is my start up drive). After I selected the ext hd, (there is no volume listed under it so the only thing I can select is the hd itself). that is when I selected erase and then Mac journaled, then named the hd and then after selecting erase, I got the error. Also as a matter of note, if I select firstaid, both the repair and verify permissions are dimmed, so I can't even try to repair the disk. That is when I tried disk warrior hoping that could examine the hd, but since it is not mounted on the d/t, it doesn't show as a drive to check. I don't understand why the ext hd shows up in disk utility, but not the d/t. Also of note is the fact that when I connect that ext had to my Mac with a fw cable, a window opens saying that the drive is not readable and do I want to initialize it or ignore. I choose to initialize and that is when I get the error. Also of note is that I have tried both security options of "don't erase data" and "zero out data" and still get the same error.
    Hope this clarifies things a bit.

  • Disk Utility Zero Out Data option

    I read that it can be good to write zeros to all sectors of a new external disk right away. The Zero Out Data option in the Disk Utility Erase operation states that it "writes zeros over all data on the disk". Does it actually write zeros over every sector on the disk or just sectors with data? The 7 Pass Erase option states that it "writes data over the entire disk seven times". I'm guessing this means all sectors get zeroed out whether they contain data or not. The different wording suggests that these operations do different things. Any one have clarification? Thank you.

    For those who may have to reformat a new hard disk drive, one may as
    well take a little more time and have another cup or three of coffee...
    and let the computer utility write zeros in one pass; maybe even twice.
    Some new computers, especially some sold in a few geek guy stores,
    had their bogus utilities installed; an additional $40. charged on each.
    If you liked it or not. Same computer elsewhere, -40 but no geek app.
    And their choice caused some people issues with their new non-PC.
    The best avenue was to boot from OS X install disc & choose secure
    erase, and totally over-write the new computer's corrupted software.
    And choose the install option after disk utility ran, and start over right.
    With the correct partition map, reformat and a new full install.
    New and planned replacement upgrade hard disk drives can be put
    into an external HDD enclosure ahead of schedule, if not a tower;
    and ready them for later use; even test them thoroughly if desired.
    Especially if the computer the HDD is intended for, is hard to open.
    The main consideration, other than product testing, or in feeling all
    warm and techie inside, is the amount of time this sort of thing takes.
    The impatient won't hold up under the strain of loftier commitments.
    Oh well... coffee is cheaper if you get yours from Kona directly.
    Good luck & happy computing!

  • Disk utility won't erase a dvd-rw

    i want to erase my dvd-rw and when i go to disk utility and click "completely erase" the status bar says "preparing the drive" and then "waiting for drive" and right after that a window pops up saying that i've just inserted a blank dvd, and it asks what option i want. (eject, ignore, ok;action) and the dvd doesn't get erased. any help is greatly appreciated

    I am experiencing a similar problem. I have recently erased several CD RWs with Toast & Firestarter. Suddenly yesterday I try to burn a disc, but the only option showing in Disk Utility under Optiarc is The Erase section, stating "Waiting For A Disc To Be Inserted". (No First Aid, Raid, Partition sectors showing). Now, I have just erased about 10 discs but the Erase section is static. It's like it's on a loop, expecting all discs loaded to be erased. Normal CDs are rejected, but DVDs are just fine. Restarting doesn't help. Is this something that you were experiencing and have you found an answer yet.

  • Disk utility can't erase my HD

    Hi, I would like to earase my entire hard drive to reboot my macbook pro from zero. Problem is that in Disk Utility the Format dropdown and the Name are grey and wont let me make any changes. Does anybody know how I can slove this? Thanks!

    Since you have an Early 2011 model did it come with Lion installed or Snow Leopard? That model came with both versions of OS X Pre-installed depending on when it was made. If it was an Early Released Early 2011 it came with Snow Leopard Pre-Installed and you got System Reinstall DVDs with it. If it is a Later release Early 2011 model it came with Lion.
    If it came with DVD discs and Snow Leopard you will need to use those discs to return it to as shipped from factory state.
    If it came with Lion Pre-Installed you willl need to use the Online Internet Recovery system to return it back to as shipped from factory state. Or if you are still running Lion you can use the built in Recovery HD partition to do that.
    To boot from the Online system hold down the Command + Option/Alt + r keys at sartup and hold them down until you see a globe on the screen.
    To boot from the built in Recovery HD partition hold down the Command + r key at startup.
    Then you can erase the Macintosh HD partition or Repartition the drive as one partition if you are booting from the Online Internet system.
    If you have DVD dics then boot the computer with the reinstall DVD in the DVD drive and hold down either the c key, to boot directly from the DVD, or the Option/Alt key to get a boot selection screen and then wait about 30 seconds + for the DVD disc to show up and selct it to boot from.

  • Disk Utility hangs when erasing external disk

    In Time Machine I wasn't able to figure out how to attach an external drive via USB. I guessed that it probably wouldn't work on a MS-DOS filesystem, so I started Disk Utility, which I never have used before. I have formatted disks before on Linux and on Windows, so it's nice to see a great app for this.
    In the Time Machine brief help text, there is not mentioned what kind of filesystem that is required or if it work with any filesystem. So I searched, and it seems as if HFS+ journaled case-insensitive is the filesystem that one should choose. Can anyone confirm this?
    When I click erase then the Disk Utility program hangs and I see the spinning beachball. The Activity Monitor program shows that disk activity stops after a few seconds. There is no more activity, so after 5 minutes I stop the program.
    I have tried several times, and I see the same behavior. I even tried restarting the computer. But no luck.
    Now my external disk no longer shows that it's a MS-DOS filesystem, but shows that it's HFS+ journaled case-insensitive. Probably not ok so far. I try creating a single patition, with format: HFS+ journaled case-insensitive, without OS 9 drivers installed. When I click apply then spinning beachball again and diskactivity stops after a few seconds, and I stop the program after some minutes where it has been inactive.
    My guess is that the disk-erasing task failed and has left the disk in a broken state. During this task Disk Utility began to hang for a reason that I don't know.
    My second guess to why the create-partition task failed, is that the disk is in a broken state, and thus the partition cannot be created, and Disk Utility hangs.
    How do I format the external disk from the command line?

    In Disk Utility, select the drive mechanism (not the volume on it) and click the Partition button. Use the Options button to choose the GUID partition scheme, then make one HFS+ (Journaled) volume.
    There is no point in using the command line for this task, because if Disk Utility cannot deal properly with the disk, Mac OS X will not either. Disk Utility is using diskutil to do the partitioning and formatting.

  • Hard drive absent in disk utility - want to erase and reinstall MacOS

    Hi there. Any help would be most gratefully received.
    I have a Power Mac G5 Dual 2Ghz with 2GB RAM, one internal HDD (250GB serial ATA 7200rpm - the original one), two external HDDs and a Philips 170B display, running (or not) MacOS 10.39.
    It was working fine yesterday but on startup this morning it hung for a while on the grey Apple logo and progress "clock" then froze on a blue screen.
    I tried removing all cables except display and keyboard/mouse and restarted a few times but to no avail.
    I tried entering safe mode but it wouldn't work. Upon subsequent attempts at startup it took me (instead of the blue screen) to the flashing question mark/finder folder screen.
    I then booted from my install CD and tried to run Disk Utility to repair the disk. Disk Utility recognised the disk and allowed me to select it. But when I tried to verify it, it failed and told me to repair. When I tried to repair it told me "invalid b-tree node size".
    I then tried running the Apple Hardware Test CD. It found no faults at all in the full test of the system.
    All of my data is stored on my external HDDs so my next thought was to erase the internal HDD and reinstall my software. (I use the Mac solely for Video editing and the only applications I have installed - in addition to all the basics - are the Apple Production Suite.)
    However, this time when I booted from the install CD, Disk Utility would not recognise the internal HDD. The only thing I had done since it had recognised it the last time was to run the Hardware tests. In addition, since running the hardware tests, the HDD started making a strange noise whenever the Mac was on - like clicking with almost beep-like access noises.
    The last time I tried restarting and booting into Disk Utility, the clicking began again and then eventually stopped. But still no evidence of the drive in Disk Utility.
    Soooooooooo. I don't need to save any data on the hard drive. I have all my software and OS discs. I just want to wipe the drive and start afresh (assuming this is the best course of action?). But I am unable to do so because of this new development in my attempts to fix the problem: the unrecognised hard drive (coupled with the strange noises).
    If you have any ideas, please do get in touch. I'm pretty broke at the minute and I'm trying to find a solution without having to purchase a new drive. Obviously, if this is the only solution, then I'll have to bear that cost. But since it has recognised the disk just a few steps before, I'm hoping there's a way back.
    Yours in optimism

    I am not sure about battery, I still use G4 MDD which is unplugged for months, was always off at night (UPS was off) and still works.
    But I would always use both SATA drive bays, and I think you need to invest in one or two new drives.
    For now, try disconnecting your drive and see if you can boot from external drive and CD/DVD.
    Also see if you can get into Open Firmware.
    Resetting PMU would also be worth while when you get in to disconnect your hard drive (I think 3 yrs is more than enough for any OEM drive, too).
    http://www.apple.com/support/powermac/

Maybe you are looking for