About loading modular applications

Hi guys..
I have some question about the Module class..
I know it's a great feature and I truly thank Adobe guys for
this new awesome class
but it seems to me that
each loaded application (i.e. modular applications surrounded
by <mx:Module> and </mx:Module> tags)
seems to shrink its size when it is actually loaded in the
shell application...
I even put width="100%" and height="100%" in every and each
tag of these loaded applications
but to no avail...
Is this a bug or am I missing something somewhere??

I also have this problem. I posted an example in message
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=60&catid=585&threadid =1233231&enterthread=y
I tried to set width="100%" in every possible tag, even the
suggested percentWidth="100" in de module but it doesn't work.

Similar Messages

  • XP firefox9 I tried todownload a file and got a message about needing an application. Since then when I try to down load that file firefox flickers and multipe

    Every time I go to the file that I got the message about specifying an application (which I'd never seen before) to download it, and I try to download it,firefox starts flickering and multiple entries appear on the task bar. ctrl-alt-del eventually stops it. I can download the same file no problem with IE but I prefer to use firefox. I have been downloading a similar file (torrent file for the daily show) for years without any problem.

    I'm having the same problem with this, only it happens with all add ons. I get error -228 when I try, every time.
    I can't install through the add-on manager, from the add on site, or by saving the link on the site. I've tried downloading it in Firefox, Chrome, and IE to no avail.
    I can, however, drag existing .xpi files into the add on manager and they will install just fine.
    I've looked through all the available other documentation, including the two links suggested by TXGuy above and none of it has helped.

  • My mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen.  After logon, it takes very long time to load any application.  pls help

    my mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen.  After logon, it takes very long time to load any application.  pls help

    OK. If you believe that.
    When the disk is starting to die it can be bad for a moment and then be good for a while. If there was no problem while you were checking it of course it shows up good.
    I tell you those are the signs of a disk that is about to die.
    Allan

  • Load balancing Application Server

    Hi
    I am new to peoplesoft dba
    It would be great if somebody could point me to the steps required for setting up loadbalancing for Peoplesoft application server (not web server)
    In particular i wanted to know where to look for information on 'directing certain loads' to particular server.
    Thanks a lot
    Cyril

    Are you talking about load balancing from Webserver to multiple appserver in 4tier mode ? See here the configuration.properties conf :
    http://download.oracle.com/docs/cd/E13292_01/pt849pbr0/eng/psbooks/tsvt/book.htm?File=tsvt/htm/tsvt14.htm#H4003
    Or are you talking about load balancing for 3tier mode ? See TUXEDO Connect String* in the profile (configuration manager) :
    http://download.oracle.com/docs/cd/E13292_01/pt849pbr0/eng/psbooks/tsvt/book.htm?File=tsvt/htm/tsvt11.htm#H4032
    Nicolas.

  • About load balancing in rac

    Dear Gurus
    I want to ask about load balancing in RAC.
    we have two nodes rac1 rac2 with physical ip as virtual ip as
    rac1 rac2
    physical 10.22.1.50 10.22.1.51
    virtual 10.22.1.54 10.22.1.55
    and two appliction servers app1 app2.Actually in tns file of app1 there is entry of virtual ip of rac1 (10.22.1.54)and in app2 virtual ip of rac2 (10.22.1.55). so we want to test whether load balancing is happening or not .like if app2 is down so whether the connection of app1 moving to rac2 also or not
    so we down app2 and check.Guys tell me how could i check in that duration that whether connnection going to rac2.
    i am unable to find the parameter of sessions connected in awr .Please tell how could i identify

    i have stopped the IM's of one of my application server and checked the connections to my database with below query and according to it its connecting to both instances.Does it means that load balancing is happening fine.
    SQL> SELECT inst_id, TO_CHAR(logon_time, 'DD-MON-YYYY HH24:mi:ss') "Hour when connected", count(*) "DB Sessions"
    2 FROM gv$session
    3 WHERE type = 'USER' and TO_CHAR(logon_time, 'DD-MON-YYYY HH24:mi:ss') like '%05-OCT-2011 17%'
    4 GROUP BY inst_id, TO_CHAR(logon_time, 'DD-MON-YYYY HH24:mi:ss')
    5 ORDER BY inst_id, TO_CHAR(logon_time, 'DD-MON-YYYY HH24:mi:ss');
    INST_ID Hour when connected DB Sessions
    1 05-OCT-2011 17:20:06 1
    1 05-OCT-2011 17:27:18 1
    2 05-OCT-2011 17:11:31 1
    2 05-OCT-2011 17:26:28 2
    2 05-OCT-2011 17:26:38 1
    2 05-OCT-2011 17:27:18 1

  • When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

    When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

  • Can't Load HFM Application from Workspace

    We are running Financial Management 11.1.1.2.
    I have an overseas user that suddenly cannot load our HFM application in workspace.
    She was previously able to do this without issue. She can log into workspace ok. When she clicks on the application, the Icon just spins and it never loads.
    She has tried on multiple machines from her location. No other user in this location has the issue, and other users can log into HFM from her machine.
    If she logs into our Citrix server (local to HFM Servers) she is able to load the application.
    Since she is able to login locally and not over the WAN I would think it was a network issue but other users in her location have no issues.
    Any ideas or thoughts would be greatly appreciated.
    Thanks
    Edited by: General Patton on Jun 17, 2010 3:00 PM

    Is there a cache in the location's proxy?

  • Error message "failed to load an application resource (internal error)" when checking form in LiveCycle preview PDF

    After creating a form, when I click on Preview PDF, I am now getting an error message "Failed to load an application resource (internal error)". Not sure why this has started recently, but it makes it impossible to check my forms for clients before I send them. I can open them outside of the program in Adobe Reader, but it is faster to check the form within LiveCycle and change them if necessary. Please help!

    I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
    Hope this helps.

  • There was a problem loading the application

    I find that I can log into iCloud with no problem but after, that every time I try to open an app I get the message
    "there was a problem loading the application"
    I'm using Safari 7.0.5
    This has been going on for quite some time and during that period I've read many threads and followed various trouble shooting guides but I can't solve it. I really would appreciate any suggestions that you might care to offer.

    Downloading Safari 5.1.7 will work, or at least that's how I now access iCloud and run the Apps. IE9 64-bit will also work. On my system it appears that IE9 32-bit has a problem with iCloud due to Norton Internet Security. When Norton's "Browser Protection" is disabled, IE9 32-bit works for me.
    With Safari, I set its Homepage to iCloud so I'd have a direct link to the iCloud website.

  • Error when loading LCDS application

    Hi,
    I'm implementing an application using LCDS 3.1 data management service together with Fiber. I got the following error occasionally during the loading of my application in browse window.
    Error: DataService error. Configuration not present.
             at mx.data::Metadata/getUID()[C:\depot\DataServices\trunk\frameworks\projects\data\src\mx\da ta\Metadata.as:1441]
             at mx.data::ConcreteDataService/http://www.adobe.com/2006/flex/mx/internal::getItemCacheId()[C:\depot\DataServices\trunk\f rameworks\projects\data\src\mx\data\ConcreteDataService.as:3621]
             at mx.data::DataList/http://www.adobe.com/2006/flex/mx/internal::processSequence()[C:\depot\DataServices\trunk\ frameworks\projects\data\src\mx\data\DataList.as:2528]
             at mx.data::DataList/http://www.adobe.com/2006/flex/mx/internal::processSequenceResult()[C:\depot\DataServices\ trunk\frameworks\projects\data\src\mx\data\DataList.as:2881]
             at mx.data::DataListRequestResponder/result()[C:\depot\DataServices\trunk\frameworks\project s\data\src\mx\data\DataListRequestResponder.as:103]
             at mx.rpc::AsyncRequest/acknowledge()[E:\dev\4.x\frameworks\projects\rpc\src\mx\rpc\AsyncReq uest.as:84]
             at NetConnectionMessageResponder/resultHandler()[E:\dev\4.x\frameworks\projects\rpc\src\mx\m essaging\channels\NetConnectionChannel.as:547]
             at mx.messaging::MessageResponder/result()[E:\dev\4.x\frameworks\projects\rpc\src\mx\messagi ng\MessageResponder.as:235]
    After I refresh my browser to load the application once again, the error does not come up again in most of the time. Anyone knows what may be the cause?

    The initial communication with the server is not happening.  Review your messaging and channel configuration against any other system variables or setup that might interfere with this.

  • Any known issue about running Swing application in WTS?

    *{color:#0000ff}Is there any known issue about running Swing Application in Windows Terminal Server?{color}*
    It is started using JWS from internet (I mean, it checks if there is an avaiable update and updates or just fun).
    _*{color:#800000}+The problem is that just one machine can open the application at the same time+*_
    _*{color}*_
    *{color:#666699}Is there any config in java or jws to run properly several instances of the application (terminal clients)?{color}*
    Edited by: Franzisk on Sep 24, 2007 6:16 PM

    876587 wrote:
    ... and that cause the other threads cannot access the JNI. The same application works fine on other Solaris 10 machines.
    Different environments mean just that. So something could be causing it outside java.
    Additionally if anything at all is different in the execution data, such as even a name having a different size, then it would change the execution path.
    Which would cause a problem in the JNI code to manifest itself on only one box. Probably isn't a pointer bug but all sorts of odd behavior can result from that.

  • Newbie question about loading servlets on tomcat

    I have what is probably a very basic question about loading simple servlets on to tomcat to test its installation. I have followed instructions from numerous tutorials to the letter but still I can't get it to work.
    I have installed tomcat on win2k in c:\tomcat. I set up the jdk, environment vars (JAVA_HOME, CATALINA_HOME, TOMCAT_HOME) which all point at the correct dirs. I can compile a servlet without errors. I can also place a test jsp and html file into the root directory and they both work fine.
    However, now I am trying a test servlet and no matter what I do it gives me a 404. I have a servlet class file called "HelloServlet.class" which I placed into the %install_dir%\webapps\ROOT\WEB-INF\classes directory. I try to reference it using this url:
    http://localhost/servlet/HelloServlet
    Tomcat is configured to use port 80 and has been restarted after adding the servlet class file. Does anyone have a clue why this is not working for me?
    Many thanks
    Marc

    You have to add in the web.xml file that it is in the WEB-INF dir, the information about your servlet. An example:
    <web-app>
    <servlet>
    <servlet-name>HelloServlet</servlet-name>
    <servlet-class>HelloServlet</servlet-class>
    </servlet>
    <servlet-mapping>
    <servlet-name>HelloServlet</servlet-name>
    <url-pattern>/HelloServlet</url-pattern>
    </servlet-mapping>
    </web-app>

  • HT1926 I cannot get iTunes to load -- "Apple Application Support was not found".  I have tried multiple things to fix it and nothing works including re-installing.

    I cannot get iTunes to load -- "Apple Application Support was not found".  I have tried multiple things to fix it and nothing works including re-installing.

    Try b noir's post  Standalone Apple Application Support install to see if that can repair the problem or provide futher information, otherwise try reinstalling again as shown in Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Failed to load an application resource (internal error) - error message when previewing pdf in program

    Hi,
    I keep getting this error message when trying to Preview PDF in program "Failed to load an application resource (internal error)". I haven't changed anything in LiveCycle, so not sure why this is happening. Have had this issue for the past few months. I've been working around it, but it's kind of a pain. Would prefer to view forms in program. Suggestions to fix this?
    Thank you!
    Stacy

    I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
    Hope this helps.

  • Process for Flat file delta load from Application server to transactional??

    I want to do a flat file extraction in delta loads from application server and that should be loaded into a transactional cubes scheduling a process chain.
    Can any one help with ABAP code and step by step process for this?
    Thank you
    Devi

    Hi Devi,
    As per your explaination, you want to load a list of files from application server using process chain.
    You can do this with below steps.
    1) Create a Event and call event to run Process chain multiple times.
    2) Put all filenames in a file say, source-File
    3) Write a rooting to read filename from Source-File and trigger InfoPackage
    4) At the end of the process chain create new customized program which will delete first line from Source-File so that it will take next file in next run as well as delete currently loaded file. Once this is done trigger event again to start process chain again.
    Regards,
    Ganesh

Maybe you are looking for

  • Multiple users on the same device

    Can I have 2 or more users on the same device? I want to use a Kindle Fire HD when traveling with separate accounts for my wife and myself.

  • Get value in a field in ALV OO

    Hi experts, i have a new problem, i created a report with ALV OO, and a field has a matchcode but when i choose one value with double click or check icon, the value don't appear into the field, thanks for your help, i wait your answers =)

  • No cabling at all!

    in the last month a block of 10 flats were finished in which my family and others have moved. at least four of these including myself have had orders placed with bt. my first appointment on 7th October came and went and after contacting bt found out

  • CAMERA RAW POST CS2

    I have a Nikon D70 and a Nikon D7000.Camera raw with CS2 works fine with D70 but wont accept raw pics from D7000. How do I aquire downloads for camera raw to work with D7000 and do I need to upgrade CS2?

  • List Validation for a task

    Using SPO. I need to have the following condition in a task update: If the task outcome is approved, the fields in the task cannot be blank. However, if the task is rejected, fields can be empty. Can this be done using Validation settings for the lis